VTXTM field structure

Hi Experts,
I`m trying to get for a list of customers, the Partner Function ( PE) Sales Employee name, since it`s a structure field and not a table field, I`m getting difficulty how to get the data?
Can you help plz.
Thanks
Fadi

Hi ,
Please double click on VTXTM  this will take you to Filed then  click on where to use . this will Give all tables where this field is used and you can find out .
also please refer to below doc
How to find Table name for a Field which is shown structure name on press F1.

Similar Messages

  • How we can attach search help directly to the table field / structure field

    Hi All,
       Can you please let me know the step by step procedure of How we can attach search help directly to the table field / structure field.
    Regards,
    jaya

    Hi Jaya,
    1. Create a search help using SE11.
    2. Include this search help in the field of table in SE11. There is a tab in the table defination where you can specify the search help.
    Even you can specify search help at data element level, screen field level.
    Reward points if useul.
    Regards,
    Atish

  • When i adjust the layout frame total fields structure changed

    Hi........
    i developed new form when ever change the layout frame then the fields structure changed.
    if i adjust the frame fields structure changed.
    what i do please give me any solution
    Regards
    Maha

    Hi,
    Thanks for giving replay i got solution in oracle form 10g .
    go to frame property pallet "update layout =manual".
    regards
    Maha

  • Is there any way to copy proxy filed structures to ABAP field structure?

    Hi All,
    We are getting message from  XI using inbound proxy and sending response asynchronously by outbound proxy.
    my question: " is there any way to copy or to move incoming proxy fields to ABAP backend fields?"
    for ex: we are getting Name structure from proxy wit fields firstname and lastname.
    and proxy will generate some structures for name. backend ABAP system will have structure name with two fields having fname and lname as data elements.
    so how can we directly move proxy fields to ABAP fields? ( here in example there are only two fields but real scenario we will have thousands of fields for which we cannot map manually from proxy fields to ABAP fields.)
    please help me in this regard.
    Thanks in advance.
    Regards,
    Ujwalkumar

    Hi Ujwalkumar,
    if you have control over the proxy:
    Create your interface at XI like the structure in backend system. Same structure and same fieldnames. If you regenerate your proxy you can use abap order "MOVE CORRESPONDING" to map all fields.
    Regards,
    Udo

  • Idoc field structure error.

    Hi,
    I have a requirement like i need to add an additional field to the existing IDOC structure from where it is used for  the xslt mapping and do the remaining process.
    The mapping part is one to one but i need to add an another field to the external defintion idoc.
    Source is IDOC and the target structure is the same structuer that is in the external definiton.
    for this i have exported the xsd of the idoc and then i have imported through External Definitions part. but if i need to add an another field to it it is not allowing to do that..
    So please can anyone suggest me how to proceed..
    Thanks,
    Sai

    Hi Sai,
    i need to add an additional field to the existing IDOC structure
    Is there any specific reason for usign IDOC as external definition (are you changing the occurance of IDOC)?
    what is your sender and receiver system?
    Are you expecting the value for this addition field to be populated by sap along with the rest of IDOC data? if yes then ,get a custom IDOC created in SAP with the required field.
    Or if you want to populate this additional field in PI usign any logic (assuming you are sending to any non sap system), then you can create a new ED for the targert , just export
    the ED to desktop , open with any xml editor (xml spy or microsoft  visual studio 2005) and navigate to the portion of xsd which you want to edit add the field -> reimport in PI and  use it as your target strucuture.You cannot edit ED directly in ESR.
    Regards,
    Srinivas

  • CProjects Fields - Structures and field Controls

    Hi,
    On the Project -Additional Data tab on cProjects, we have a field which is called Project "Created by". I am trying to locate where is that field stored in the tables. I saw that under the field controls ,an external structure is maintained and this feild is available there but not sure how to view the data in that structure ( i guess we can't view this data as its under a structure).
    Since we have the accounting integeration on, so when we transfer the Project ,the Projects gets created in the backend ( ECC) with a "created by" of the repsective cProjects server name.
    All I am looking for is who created the Project ( as in cProjects) and the date on which it was created.
    Thanks.

    Hi,
    The structure is DPR_TS_UI_PRJ_DATA.
    If you need to get the values you should use method get_detail_data of class cl_dpr_ui_log_project_detail.
    Regards,

  • How to make a bit field (multiple bits selectable) structure?

    I'm develping a program to communicate with an external device, and it has a specific protocol. Often times, I need to make structs/typedefs of specific type (u8/u16/u32) that have values defined by multiple selection. For example, the protocol asks for the following:
    The field is a bit field structure (multiple bits can be set simultaneously) defined as follows:
    typedef u_16 COMM_TYPES;
    #define A 0x8000
    #define B 0x4000
    #define C 0x2000
    #define D 0x1000
    How would you recommend implementing this? I've tried looping through a listbox in combination with a text ring that has the name and value pairs, but its cumbersome doing for each unique typedef (see image below)

    That's what I would do.  Other than I might use OR instead of sum, but that shouldn't make a difference.
    The other possibility would be to take the array of index values,  to a 2^x where x the array of indices, then add that.  This assumes that every index in the array matches bit for bit with the enum values.  Nothing is missing, and array element 0 corresponds to bit 0.  In your case, your order is reversed, but you can reverse the array.  And all your values are in the highest nibble of the highest byte (hex ?000)  So you'd have to do some bit shifting or multiplication to get the actual values.
    But I think this would make your code that much more fragile.  I would just do what you have shown.

  • How to map new field in DSO

    I have added a new field to the dso and i have replicated the datasource as well which is showing the new field newly added in ecc. how can i map the new keyfigure in the transformation between the datasource and ods. its showin in the ds, can u pls tell me how to map now.

    Ya but the problem is I have an infosource in between and its not showing in the transformation between the dso and infosource.....nor the infosource and the datasource. But its there in the first transformation on the dso side, not on the inforsource side..... but how to get that field in the infosource side...so that i can map the field between both the transformations....between infosoucre and dso and infosouce and ds.....You know what I mean. the zfield is showin in the dso field structure in the first level mapping between dso and infosouce....but where do i map it.
    Edited by: Daniel on Nov 28, 2011 9:59 AM

  • Newly added field in the data Source not getting populated

    Hello All,
    We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
    When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
    Please let mw know how to get the newly added field selected in the system generated query of the infoset.
    Regards,
    -Purnima

    Hi,
    As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
    If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
    I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
    I hope it will help.
    THanks,
    S

  • HELP!  JOB ON THE LINE-  Need to import fields from one document to another document

    In a nutshell I have a set of documents and we now have a new structure for those documents. Either I have to cut and paste all the data from one to another or figure out how to import fields to another document.
    I have two documents. Both are different but require the same information. Basically I need to have one file with fields import specified fields from another document. Ex., Name on document 1, I need the file to know to get the Name field on document 2 and import it into the specified field on document 1. I will have multiple fields that need to do this importing. I REALLY NEED TO FIGURE THIS OUT B/C I HAVE A TON OF DOCUMENTS THAT NEED TO BE COMPLETED.

    If you are talking about the field structure, not the content that Bernd commented on, make a copy of the document with the fields. Open the file and use replace pages to replace the pages with the new document layout. After you have replaced the pages, you will have to select the field tools and move the fields to the proper location. If the form was made in Designer, I am not sure of the process. There is likely a similar process in Designer, but I don't use Designer and can't comment. You may have to go to the Designer forum in such a case, unless other Acrobat users here can help.

  • Hiding a field in PCUI

    Dear Gurus,
    I am asked to do hide some fileds, add some new tabs,  rename some of the labels etc in CRM Portal 4.0 running on EP 6.20. Here is my approach to hide one of the fields Quality(Auto) in the lead management screen  for Lead Manager.
    I have identified my Field group. it is LEA_BD_QL. I have executed the transaction code CRMC_BLUEPRINT_C and selected the Application Element -> Field Group Structure. There were no entries for this field group. I have made an entry
    SCREENPOSITION : 20
    FIELDNAME : QUAL_LEVEL_AUTO
    FIELDTYPE : DropdownListBox
    Not In List : Yes
    Not in Detail : Yes
    and saved the entry.
    Then went to Application Element -> Layout Generation
    selected the field group as LEA_BD_QL and my View as : MKT_LEAD_M
    The Only Check Field Groups check box is checked and executed, I got the message : "No field group was selected in the blueprint table"
    When I try to generate the lay out for LEA_BD(which contains LEA_BD_QL), I get the message : Layout for field group LEA_BD contains no fields
    and once I goto the portal, the field is not hided.
    Can you pls suggest me if I am generating the field group properly and did I miss any of the step or not following the steps properly.
    Thanks!
    Vivek

    Raj,
       There are 2 field groups in the field structure with same name "9DA12CF6F564DB4997234924C02885B5" one for blank BLVIEW and another for MKT_LEAD_Q. When I delete these 2 entries and generate the layout, I get the message "Correct Field Groups LEA_BD MKT_LEAD_Q". I tried generating the layout with both blank view and also with the role MKT_LEAD_Q and I get the same message. What is the message that I get if the layout is generated proprely. Do I have to create any ZView or Zapplication, import any field groups here into the zapplications? I have not created any Zapplication or ZView. I am trying to modify CRMD_BUS200108. Looks like I am missing a vital piece here. If you any detailed document for this process, can you pls pass it on to me.
    Thanks!
    Vivek.

  • Hiding fields of a table in distribution model

    Hello Folks,
    I have a standard table with the append structure included with two fields.
    I have created two distributed systems to two different servers- but want to transfer standard table data without custom fields data to one system, where as standard + custom fields structure to other system.
    Could some help me out in fixing this.

    Hi,
       Go for field level filtering in Distribution model.
    Thanks,
    Asit Purbey

  • How to update a custom field of MARC table using BAPI_MATERIAL_SAVEREPLICA

    Hi,
    I want to update a custom field (Appended field) of MARC table using  BAPI_MATERIAL_SAVEREPLICA. Please help me in this issue. I cannot use BAPI_MATERIAL_SAVEDATA as this updated the MARC table record by record. I have to update bulk records at a time.
    Thanks
    Rahul.

    Hi,
    Use the Documentation given for struture in BAPI docuemntation...
    For loading data into custom fields of MARC use the structure - BAPI_TE_MARC.
    First, structures BAPI_TE_<NAME> (<NAME> = MARA, MARC, MARD, MBEW, MLGN, MLGT, MVKE, MARM, MAKT) and the appropriate check structures BAPI_TE_<NAME> (<NAME> = MARAX, for example) have to be extended by the customer to include the required fields. The structures that are delivered as standard only contain the relevant key fields. When new fields are added to this structure, you should ensure that a field has the same name as the field in the database table. Furthermore, the fields in the structures BAPI_TE_<NAME> can only be CHARACTER fields. Data element BAPIUPDATE is to be used for the fields in the check structure (exception to this: key fields.)
    Parameters EXTENSIONIN and EXTENSIONINX are used for transferring data to the method. Field STRUCTURE contains the name of the structure (for example, BAPI_TE_MARA or BAPI_TE_MARAX). This names is used to identify the work area (for example,  WA_BAPI_TE_MARA or WA_BAPI_TE_MARAX) to which the data is transferred. The remaining fields in parameters EXTENSIONIN or EXTENSIONINX contain data for the key fields (for example, the material number) and the data for customer-specific fields. The number of characters reserved in both parameters for the contents of the customer-specific fields must match the number of characters for the relevant field in the work area. If the number of required characters is less, the remaining characters are left blank. Only when all characters have been filled can the contact for an additional field be transferred. Bear in mind that only data for which an appropriate indicator has been set in the work area can be updated to the database.
    Regards,
    Bhargava

  • CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

    Hello Experts!
    We're working on replication of custom fields from IS-U to CRM 7.0.
    Can you help me with clarification of my understanding of these questions..?
    1) CRM/IS-U mapping tables for buag_main:
    Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
    Table FKKVKP were enhanced with some z-fields,
    so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
    But we see that these CRM and IS-U tables have far not the same field structures..
    So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
    2) Access to Business agreement with possibility to add custom field:
    I couldn't find in Web UI where i can directly edit profile of Business Agreement..
    I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
    There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
    Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
    So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
    3) CRM/IS-U data exchange functions:
    I tend to use tcode CRMC_BUT_CALL_FU:
    for CRM inbound event of BUAG object  - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
    Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
    Please tell me if you need more information..
    Looking forward to your answers.
    Thank you a lot in advance!
    Kind regards,
    Evgenia

    Hi Gobi,
    Thank you for advice. But:
    I've created fields not by using AET - I used documentation that Nicolas suggested me above.
    I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
    Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
    Any ideas?
    Thanks in advance.
    BR,
    Evgenia

  • Duplicate check through Referece field in MIRO

    Hi All,
    Can any one tell me, how i can make Reference field ( structure INVFO-XBLNR) check in MIRO transaction.
    Requirement is that, system should not allow posting two MIRO documents with same Reference number, duplicate check should be done from Reference field.
    is there any standard config abailable, should i look for exit.
    Regards,
    Sursh Patipati
    Note : Subject is discussed widely, Please search forum before posting.
    Edited by: Jeyakanthan A on Nov 17, 2011 10:36 PM

    Hi,
    If you have set duplicate invoice check in a particular Vendor Master record and there is an entry in the Reference field when you enter an invoice for this vendor, the system always checks if there is an invoice containing same data as which just entered.
    The following check criteria can be used
    - Co, Code.
    - Vendor
    - Currency
    - Reference
    - Invoice Date
    - Amount
    You must specify in customizing whether the Co. Code, reference and Invoice date are included in the check.
    Path: IMG->Materials Management->Logistics Invoice Verification-> Incoming Invoice-> Set check for duplicate Invoices (T-Code: OMRDC)
    If it finds an invoice that matches all these attributes (Message # M8 108) is issued as error or information.
    Hope this serve your purpose!
    Reetesh

Maybe you are looking for