VueServlet Deployment success but Verifying VueServlet Deployment

Dear All,
I'm on my way to integrate Autovue with Oracle UCM 11g. The UCM is 11.1.1.0.8 and the autovue is 20.2.2. The autovue is already installed and I follow the instruction to deploying vueServlet. The deployment is successfull but when I try to access the url as on the instruction the page couldn't be found. the error is
<br></p><p>Error 404Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
The document I follow is 'Oracle AutoVue Client/Server Deployment Installation and Configuration Guide Release 20.2.2'. I share the screenshot of the deployment process on https://dl.dropboxusercontent.com/u/68343018/Deploy%20vueservlet%20documentation.docx
Does anybody know why I got this error and how to fix it? Really appreciate for your help
Best Regards
Akhmad H Gumas

Hi Akhmad,
I looked at your screenshot and the steps you did looks good. My guess would be that there is either something wrong with your VueServlet WAR file or else the port you are using "16200" is wrong. It might be best for you to create a new SR and add your VueServlet WAR file to the SR, support will be able to test and confirm if it is ok or not. Also I think it would be good to test your VueServlet using your WebLogic port "7001" instead and see what happens.
Thanks,
Daniel

Similar Messages

Flat file created ,external table created, deployed successfully but...

hi everyone,
I have a problems :
I have created a flat file through flat file module from a text file.
i've done it successfully,
then i create an external table through external table module for the same
flat file , went successfully,
then velidation went successfull,
and i carried out deployement for the same, that also done successfully.
but when i tried to check the database through SQL-Plus :
i came across with the following error :
SQL> CONNECT TARGET_SCHEMA/TARGET_SCHEMA
Connected.
SQL> SELECT * FROM CUMMINS_EXT;
SELECT * FROM CUMMINS_EXT
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file Cumminsparts.txt in TARGET_LOC_CUMMINS_LOC not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
ORA-06512: at line 1
Please someone guide me to resolve this prob.
Thanking you,

Thanks to you all,
I had created a new file location in OWB to create
a flat file module but I dont know somewhere
i missed something while creating the new file location
that is why it was not loading data inspite of deploy successed ,
but when i put the same file to one of existing file location
and i deployed it and i got the data.
now i am exploring the existing file location for what was that
i missed during creation of new location.
Guys i am new to OWB so i dont know how to go about , if you have any
easy way to get hands on OWB, please let me know
Once again thanks everybody.

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Advertisment Report says successful but program did not install...help?

I created the package and package works outside of sccm. Here is the execmgr.log info which says the program installs successfully but the progam is not on the machine. It is in the cache but does not seem to install... what's happening?
Policy is updated for Program: Lego Mindstorms, Package: NP1003A8, Advert: NP120365 execmgr 1/28/2010 3:51:35 PM 2820 (0x0B04)
Policy is updated for Program: Lego Mindstorms, Package: NP1003A8, Advert: NP120365 execmgr 1/28/2010 4:01:18 PM 3900 (0x0F3C)
Mandatory execution requested for program Lego Mindstorms and advertisement NP120365 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Creating mandatory request for advert NP120365, program Lego Mindstorms, package NP1003A8 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Requesting content from CAS for package NP1003A8 version 2 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Successfully created a content request handle {68625778-FDE1-4EEF-BA7A-4276FCDFFB7D} for the package NP1003A8 version 2 execmgr 1/28/2010 4:04:34 PM 3848 (0x0F08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "NP120365";
ClientID = "GUID:1340803F-10E6-4EF4-8CDA-5CB17EB24979";
DateTime = "20100128210435.308000+000";
MachineName = "PD-224-10";
PackageName = "NP1003A8";
PackageVersion = "2";
ProcessID = 1996;
ProgramName = "Lego Mindstorms";
SiteCode = "NP1";
ThreadID = 3848;
execmgr 1/28/2010 4:04:35 PM 3848 (0x0F08)
Successfully raised SoftDistWaitingContentEvent event for program Lego Mindstorms execmgr 1/28/2010 4:04:35 PM 3848 (0x0F08)
Execution Request for package NP1003A8 program Lego Mindstorms state change from NotExist to WaitingContent execmgr 1/28/2010 4:04:35 PM 3848 (0x0F08)
Content is available for program Lego Mindstorms. execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
CExecutionRequest::Overriding Service Windows as per policy. execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Execution Manager timer has been fired. execmgr 1/28/2010 5:06:49 PM 820 (0x0334)
Executing program LegoMindstorms.exe in Admin context execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Execution Request for package NP1003A8 program Lego Mindstorms state change from WaitingContent to NotifyExecution execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Checking content location C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System for use execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Successfully selected content location C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
GetFileVersionInfoSize failed for file C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\LegoMindstorms.exe, error 1812 execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Executing program as a script execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Successfully prepared command line "C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\LegoMindstorms.exe" execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Command line = "C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\LegoMindstorms.exe", Working Directory = C:\WINDOWS\system32\CCM\Cache\NP1003A8.2.System\ execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Created Process for the passed command line execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "NP120365";
ClientID = "GUID:1340803F-10E6-4EF4-8CDA-5CB17EB24979";
CommandLine = "\"C:\\WINDOWS\\system32\\CCM\\Cache\\NP1003A8.2.System\\LegoMindstorms.exe\"";
DateTime = "20100128220649.886000+000";
MachineName = "PD-224-10";
PackageName = "NP1003A8";
ProcessID = 1996;
ProgramName = "Lego Mindstorms";
SiteCode = "NP1";
ThreadID = 3212;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\WINDOWS\\system32\\CCM\\Cache\\NP1003A8.2.System\\";
execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Raised Program Started Event for Ad:NP120365, Package:NP1003A8, Program: Lego Mindstorms execmgr 1/28/2010 5:06:49 PM 3212 (0x0C8C)
Program exit code 0 execmgr 1/28/2010 5:07:10 PM 3212 (0x0C8C)
Looking for MIF file to get program status execmgr 1/28/2010 5:07:10 PM 3212 (0x0C8C)
Script for Package:NP1003A8, Program: Lego Mindstorms succeeded with exit code 0 execmgr 1/28/2010 5:07:10 PM 3212 (0x0C8C)

I am having exact same issues on Lego Mindstorm 2.0 - usig sccm 2012R2
Fatal Error. Required MSI directory property PersonalFolder is in an invalid location. "C:\doucments and
setting\local service]My doucments" which does not exist the target machines
what was the resolution for this?
I would really appreciate any help regarding this.
Have you looked at creating an MST yet? that would be my first step. My second step is to call Lego and get their support to tell you how to deploy their application to an enterprise environment.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

What if simple Applet prg compiles successfully but do not loaded

Dear Sir,
I am new to applet programming. I have witten a very simple applet program with init, start and paint method. My prog complied successfully but when I run the prog using appletviewer cmd, the Applet window does not loaded(does not appear). Please guid me throgh the solution.
Thanks & Regards
pankh

Take a look at this applet tutorial.
[http://java.sun.com/docs/books/tutorial/deployment/applet/index.html]

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Time Machine/Time Capsule backups successful, but take a long time

I purchased a 512GB Time Capsule about a year ago. Since I got it, backups have been successful, but very slow. An average backup takes about 40-50 minutes, usually for less than 20 MB transferred.
Here are a couple summaries of recent backups (see end of post for full logs):
BACKUP 1:
11 minutes to detect if pre-backup thinning was necessary
18 minutes to copy 281 MB
5 minutes to copy 5.4 MB
4 minutes to start post-backup thinning
2 minutes to delete 1 expired backup
There were no error messages.
BACKUP 2:
4 minutes to detect if pre-backup thinning was necessary
12 minutes to copy 15 MB
5 minutes to detect if pre-backup thinning was necessary
15 minutes to copy 3.8 MB
1 minutes to start post-backup thinning
2 minutes to delete 1 expired backup
This time, there were error messages about "Unable to rebuild path cache for source item. Partial source path:"
My Time Capsule is placed about 5 feet from my laptop, with no obstructions between them. I don't think it's a wireless speed issue, because I use the Time Capsule as my router, and my connection to the net is fine. Also, operations that don't require wireless connections, like detecting pre-backup thinning, also take a long time.
Does anyone have any idea what might be going wrong to cause my regular backups to take so long?
BACKUP 1:
14/09/09 2:09:47 PM /System/Library/CoreServices/backupd[18612] Starting standard backup
14/09/09 2:09:55 PM /System/Library/CoreServices/backupd[18612] Mounted network destination using URL: afp://Peter%[email protected]/turban
14/09/09 2:09:55 PM /System/Library/CoreServices/backupd[18612] Backup destination mounted at path: /Volumes/turban
14/09/09 2:10:02 PM /System/Library/CoreServices/backupd[18612] Disk image /Volumes/turban/buttercup_001ec2146608.sparsebundle mounted at: /Volumes/Backup of buttercup
14/09/09 2:10:02 PM /System/Library/CoreServices/backupd[18612] Backing up to: /Volumes/Backup of buttercup/Backups.backupdb
14/09/09 2:21:15 PM /System/Library/CoreServices/backupd[18612] No pre-backup thinning needed: 860.3 MB requested (including padding), 280.02 GB available
14/09/09 2:39:05 PM /System/Library/CoreServices/backupd[18612] Copied 12159 files (281.3 MB) from volume butternut.
14/09/09 2:39:08 PM /System/Library/CoreServices/backupd[18612] No pre-backup thinning needed: 529.5 MB requested (including padding), 280.02 GB available
14/09/09 2:44:18 PM /System/Library/CoreServices/backupd[18612] Copied 11775 files (5.4 MB) from volume butternut.
14/09/09 2:48:43 PM /System/Library/CoreServices/backupd[18612] Starting post-backup thinning
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Deleted backup /Volumes/Backup of buttercup/Backups.backupdb/buttercup/2009-09-13-132947: 280.02 GB now available
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Post-back up thinning complete: 1 expired backups removed
14/09/09 2:50:11 PM /System/Library/CoreServices/backupd[18612] Backup completed successfully.
14/09/09 2:50:18 PM /System/Library/CoreServices/backupd[18612] Ejected Time Machine disk image.
14/09/09 2:50:22 PM /System/Library/CoreServices/backupd[18612] Ejected Time Machine network volume.
BACKUP 2:
14/09/09 9:09:46 AM /System/Library/CoreServices/backupd[15833] Starting standard backup
14/09/09 9:09:54 AM /System/Library/CoreServices/backupd[15833] Mounted network destination using URL: afp://Peter%[email protected]/turban
14/09/09 9:09:54 AM /System/Library/CoreServices/backupd[15833] Backup destination mounted at path: /Volumes/turban
14/09/09 9:10:07 AM /System/Library/CoreServices/backupd[15833] Disk image /Volumes/turban/buttercup_001ec2146608.sparsebundle mounted at: /Volumes/Backup of buttercup
14/09/09 9:10:10 AM /System/Library/CoreServices/backupd[15833] Backing up to: /Volumes/Backup of buttercup/Backups.backupdb
14/09/09 9:14:06 AM /System/Library/CoreServices/backupd[15833] No pre-backup thinning needed: 542.2 MB requested (including padding), 280.02 GB available
14/09/09 9:23:27 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:23:27 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:24:30 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:24:30 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:26:00 AM /System/Library/CoreServices/backupd[15833] Copied 1223 files (15.3 MB) from volume butternut.
14/09/09 9:31:35 AM /System/Library/CoreServices/backupd[15833] No pre-backup thinning needed: 527.5 MB requested (including padding), 280.02 GB available
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:07 AM /System/Library/CoreServices/backupd[15833] Unable to rebuild path cache for source item. Partial source path:
14/09/09 9:46:20 AM /System/Library/CoreServices/backupd[15833] Copied 11336 files (3.8 MB) from volume butternut.
14/09/09 9:47:06 AM /System/Library/CoreServices/backupd[15833] Starting post-backup thinning
14/09/09 9:49:14 AM /System/Library/CoreServices/backupd[15833] Deleted backup /Volumes/Backup of buttercup/Backups.backupdb/buttercup/2009-09-13-082428: 280.02 GB now available
14/09/09 9:49:14 AM /System/Library/CoreServices/backupd[15833] Post-back up thinning complete: 1 expired backups removed
14/09/09 9:49:15 AM /System/Library/CoreServices/backupd[15833] Backup completed successfully.
14/09/09 9:49:19 AM /System/Library/CoreServices/backupd[15833] Ejected Time Machine disk image.
14/09/09 9:49:25 AM /System/Library/CoreServices/backupd[15833] Ejected Time Machine network volume.

peterjm wrote:
I checked all of the steps in #D2 of the Troubleshooting Guide.
One other thing thing you might try, is a +*Verify Disk+* (not permissions) on your internal HD. That will not take anything like 40 hours! If it reports problems, you'll have to boot from your Install disc and use it's copy of DU to repair it. Post back if you need to do this but aren't sure how.
I think it's very fishy that Repair Disk took 40 hours -- it seems like any operation that touches the hard drive on the Time Capsule takes a long time. Maybe the hard drive is having problems? What sort of problems could a drive have that would make everything VERY slow, but still successful?
Try connecting via an Ethernet cable; see what effect that has. Everything should be faster, of course, but not wildly. Just as an example, I'm doing backups to a USB hard drive via my Airport Extreme, about 15 feet from my iMac. When I first started that way, I did a full backup via Ethernet (about 21 gb/hour), then erased it and ran again wirelessly (about 12 gb/hour).
Even 5 feet apart, you may have some sort of interference or other communications problem; if Ethernet is many times faster, then you may need to have your TC and/or wireless card examined.

Was updating Flash drive says it was successful but will not work on daily games

was updating flash drive & it said it was successful, but willnot work

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the user of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video
Non-HTML5 video

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
Connection Bus : USB                                                               Write Status : Read/Write
Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

Root device mounted successfully, but /sbin/init does not exist ???

I'm having the issue where when I boot after doing a fresh install, it gives me:
ERROR: Root device mounted successfully, but /sbin/init does not exist
Bailing out, you are on your own. Good luck
sh: can't access tty; job control turned off
[rootfs /]#
My fstab:
# /etc/fstab
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1 LABEL=homerroot
UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=homerboot
UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
# /dev/sda3 LABEL=homeretc
UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
# /dev/sda4 LABEL=homervar
UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda5 LABEL=homerusr
UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
# /dev/sda6 LABEL=home
UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda7 LABEL=public
UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
So I tried:
https://bbs.archlinux.org/viewtopic.php … 3#p1283343
I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
None of the other steps have any effect....
I also tried:
https://bbs.archlinux.org/viewtopic.php?id=172943
My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
And:
https://bbs.archlinux.org/viewtopic.php?id=166423
I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
Thanks in advance for your help guys!

WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
WonderWoofy wrote:A separate /etc is not supported whatsoever. There needs to be initial access to a few things there. I'm sure it could be made to work with some initramfs hackery. But it is neither supported or wise to do so IMO.
I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works.

Installed successfully but network is not connected. Yet when I go on my Mac network is connected. Is there any other way to solve this problem? Please help.

Hi,
I have just installed Windows 7 Home Premium on my Mac book Pro 13inch, it installed successfully but there is no network connection. Yet when I go on my Mac I can get online no problem. Please help or what other way I can do to connect windows online?

Did you download Windows Support Software when you started installing windows via Bootcamp. If yes you need to then install the Support Software after installing windows which contains Windows drivers for Mac hardware.

Dear support @Apple, I have tried to log in App Store with my Apple ID 3 times but never possible. I have tried to change password 2 times. It was successful.But soon after change of my password, I could not log in App store. It says always incorrect u

Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
May you help
Thanks

Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
tt2

VueServlet Deployment success but Verifying VueServlet Deployment

Similar Messages

Maybe you are looking for