VXML Problem
Hi All,
I have a problem with my vxml inside my TCL script. By the way i'm using the TCL2.0 script. The problem is vxml process change my output to another value. Example :
.Jan 17 13:15:25.185: <var>: namep=aniNo1 expr=0122222222
.Jan 17 13:15:25.185: //-1//VXML:/vxml_expr_eval: expr=var aniNo1=0122222222
.Jan 17 13:15:25.185: <var>: namep=aniNo2 expr=0192505246
.Jan 17 13:15:25.185: //-1//VXML:/vxml_expr_eval: expr=var aniNo2=0192505246
.Jan 17 13:15:25.189: <var>: namep=aniNo3 expr=0361565224
.Jan 17 13:15:25.189: //-1//VXML:/vxml_expr_eval: expr=var aniNo3=0361565224
.Jan 17 13:15:25.189: vxml_counter_reset:
.Jan 17 13:15:25.189: //-1//VXML:/vxml_formitem_select: Status=VXML_STATUS_OK,
.Jan 17 13:15:25.189: //-1//VXML:/vxml_formitem_select: AsyncStatus=VXML_STATUS_OK
.Jan 17 13:15:25.189: //-1//VXML:/vxml_expr_eval: expr=_in76='defined'
.Jan 17 13:15:25.189: //-1//VXML:/vxml_block_proc:
.Jan 17 13:15:25.189: <block>:
.Jan 17 13:15:25.189: //-1//VXML:/vxml_item_attrs_proc: name=_in76
.Jan 17 13:15:25.189: //-1//VXML:/vxml_exit_proc:
.Jan 17 13:15:25.189: <exit>:
.Jan 17 13:15:25.189: //-1//VXML:/vxml_nmtokens_proc: name=aniNo1 name=aniNo2 name=aniNo3
.Jan 17 13:15:25.189: //-1//VXML:/vxml_leave_scope: scope=8
.Jan 17 13:15:25.189: //-1//VXML:/vxml_vapp_terminate: vapp_status=0 ref_count 0
.Jan 17 13:15:25.189: //-1//VXML:/vxml_vapp_terminate: exitstr=aniNo1=21570706,aniNo2=192505246,aniNo3=63367828
.Jan 17 13:15:25.189: //-1//VAPP:/vapp_terminate:
.Jan 17 13:15:25.189: //-1//VAPP:/vapp_session_exit_event_name: Exit Event vxml.session.complete
the number suppose to be 0122222222 but change to 21570706. Can anybody help me? i'm using the vxml code just like in the documentation. Please2 help me? is there any new version of tcl ivr?
Hi,
//After that the agent goes to Reserved state but the call doesn't come through.//
I don't have experience on PCCE , but UCCE perspective this looks to me more like ATR(Agent Targeting rule) or Device Target Issue. Ringtone service should not cause Calls to fail.
Can you please post log from CVP, for Particular call that faced this issue?
Regards
Chintan
Similar Messages
-
Hi,
we are developing a VXML application invoked from IVR VMXL interpreter. Our problem occurs when we want to use # key. The poblem is when wue press this key the VXML interpreter ignore this. If we associate the same action to the * key it works fine. The problem is related to # key.
Is this key reserved from IVR VXML interpreter?
Has anyboby experienced this issue?
My CCX/IVR version is 7.01 SR5.
Could anybody help me?
RegardsIn the VXML standard, the # key (pound in the US, hash in the rest of the world) is defined as the termination character (termchar) for DTMF entry. If you are asking callers to enter (say) an account number which has between 5 and 8 digits, you need to know when they have finished. The normal thing to do is to allow them to enter # to say that they have finished.
I strongly suggest you don't use this key for another purpose.
But if you do need to, you must tell the VXML browser that the key does not have the usual role. The syntax is defined by the VXML standard. You can set the termchar to empty as follows;
Regards,
Geoff -
VXML RINGTONE SERVICE Problem - Call is not routed to agents
We got below mentioned error in CVP Call Server logs for our calls. Due to this calls are not routed to agents.
Apart from our call flow, I need to know what is the cause and solution of this error.
Aborting XFER and disconnecting the caller code 488. RINGTONE SERVICE is not answering within 5000 millisecs, or the caller did not receive or accept the reinvite for ringtone media setup.
1646: 172.20.242.103: May 14 2014 11:50:07.701 +0300: %CVP_9_0_ICM-7-CALL: {Thrd=pool-1-thread-69-ICM-561} CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C, DLGID = 112 [IVR_LEG] - Processing ,, [MsgBus:CALL_STATE_EVENT], ssId=SYS_IVR1, eventId=DISCONNECT, causeCode=NORMAL_COMPLETION,, LEGID = , DNIS = 9555210577, ANI = sip:[email protected]:5060
1647: 172.20.242.103: May 14 2014 11:50:07.701 +0300: %CVP_9_0_ICM-7-CALL: {Thrd=pool-1-thread-69-ICM-561} CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C, DLGID = 112 [IVR_LEG] - Publishing ,, [ICM_EVENT_REPORT], dialogueId=112, sendSeqNo=2, eventId=DISCONNECT, causeCode=NORMAL_COMPLETION,, LEGID = , DNIS = 9555210577, ANI = sip:[email protected]:5060
1648: 172.20.242.103: May 14 2014 11:50:07.701 +0300: %CVP_9_0_ICM-7-CALL: {Thrd=pool-1-thread-69-ICM-561} CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C, DLGID = 112 [IVR_LEG] - Deleted dialogue. Duration: 0 hrs, 0 mins, 0 secs, 109 msecs
2017: 172.20.242.103: May 14 2014 11:50:07.717 +0300: %CVP_9_0_SIP-7-CALL: {Thrd=DIALOG_CALLBACK.7} CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C LEGID = 28D25F8E-DA6511E3-99A5DDDE-4246E36C - [INBOUND]: Reinvitation proceeding TRYING.
2018: 172.20.242.103: May 14 2014 11:50:12.685 +0300: %CVP_9_0_SIP-7-CALL: {Thrd=pool-1-thread-66-SIP-7351} CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C LEGID = 28D25F8E-DA6511E3-99A5DDDE-4246E36C - [INBOUND]: Called ring leg: CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C LEGID = 28D1273EDA6511E3999FDDDE4246E36C-140005740768575 - [RING-OUT]: status code = 0: elapsed msecs = 5000
2019: 172.20.242.103: May 14 2014 11:50:12.685 +0300: %CVP_9_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C LEGID = 28D25F8E-DA6511E3-99A5DDDE-4246E36C - [INBOUND]: Aborting XFER and disconnecting the caller code 488. RINGTONE SERVICE is not answering within 5000 millisecs, or the caller did not receive or accept the reinvite for ringtone media setup. (current=1 max=226) [id:5004]
2020: 172.20.242.103: May 14 2014 11:50:12.685 +0300: %CVP_9_0_SIP-7-CALL: {Thrd=pool-1-thread-74-SIP-7355} CALLGUID = 28D1273EDA6511E3999FDDDE4246E36C LEGID = 28D25F8E-DA6511E3-99A5DDDE-4246E36C - [INBOUND]: Waiting 2000 millisecs before terminating.
69088: 172.20.242.103: May 14 2014 11:50:12.873 +0300: %CVP_9_0_RPT-7-handleFakeNewCall: {Thrd=Thread-58} create fake New Call for >>HEADERS: (JMSType)=MsgBus:VXML_SCRIPT_DETAIL (JMSDestination)=Topic(CVP.VXMLSERVER.REPORT) (JMSTimestamp)=1400057412857 (ServerID)=cvp9lab2.SYS_VXML1:VXML:VXML1:cvp9lab2.MsgBus001 >>BODY: elementName=start elementid=1001871400057412857 timezone=Asia/Riyadh callguid=2BEF7F5ADA6511E399B0DDDE4246E36C localOffset=180 sessionname=172.20.242.103.1400057412842.21144.outbound ani=sip:172.20.243.187 howEventExited=1 sessionvars= sessionid=1001881400057412857 eventExitState=next uui=NA appName=outbound callStartDatetime=Wed May 14 11:50:12 AST 2014 elementTypeID=0 isNewCall=true vxmldatetime=Wed May 14 11:50:12 AST 2014 version=CVP_9_0 calltypeid=6 category=0 iidigits=NA dnis=sip:[email protected]:5060 >>STATE: isTabular=false isWriteable=false cursor=-1
69089: 172.20.242.103: May 14 2014 11:50:12.873 +0300: %CVP_9_0_RPT-7-handleFakeNewCall : {Thrd=Thread-58} 2BEF7F5ADA6511E399B0DDDE4246E36C onHold start time: Wed May 14 11:50:12 AST 2014Hi,
//After that the agent goes to Reserved state but the call doesn't come through.//
I don't have experience on PCCE , but UCCE perspective this looks to me more like ATR(Agent Targeting rule) or Device Target Issue. Ringtone service should not cause Calls to fail.
Can you please post log from CVP, for Particular call that faced this issue?
Regards
Chintan -
Problem With httpd.conf and mod_rewrite rules Apache 2.2
I have some RewriteRules that are working on my Leopard Client Apache 2.2 machine - but when I try to implement them on Leopard Server Apache 2.2, they don't work. I don't get any errors, they just won't execute.
Could somebody with Leopard Server help me out using the below info?
Here are the rules I am trying to add: (below is the httpd.conf file)
======RULES========
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
# Remove ".php"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]
# Remove ".asp"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]
# Remove ".aspx"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]
# Remove ".htm" and ".html"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]
# Remove ".cfm"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]
# Remove ".bak"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]
# Remove ".inc"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]
# Remove ".*"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]
=====RULES============
=========HTTPD.CONF=============
#### Default httpd.conf for Mac OS X Server, Apache 2.2
#### This httpd.conf differs from the httpd.conf distributed
#### with Apache and the httpd.conf present on Mac OS X.
#### Feel free to edit this; the Server Admin app also edits this file but will
#### respect your changes unless noted below. See also ReadMe.txt.
## ServerRoot: The top of the directory tree under which the server's
## configuration, error, and log files are kept.
## NOTE! If you intend to place this on an NFS (or otherwise network)
## mounted filesystem then please read the LockFile documentation
## (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
## you will save yourself a lot of trouble.
## Do NOT add a slash at the end of the directory path.
ServerRoot "/usr"
## PidFile: The file in which the server should record its process
## identification number when it starts.
PidFile /var/run/httpd.pid
## ScoreBoardFile: File used to store internal server process information.
## Not all architectures require this. But if yours does (you'll know because
## this file will be created when you run Apache) then you must ensure that
## no two invocations of Apache share the same scoreboard file.
#ScoreBoardFile "/var/run/apache2runtimestatus"
## Server-pool size regulation. Rather than making you guess how many
## server processes you need, Apache dynamically adapts to the load it
## sees --- that is, it tries to maintain enough server processes to
## handle the current load, plus a few spare servers to handle transient
## load spikes (e.g., multiple simultaneous requests from a single
## Netscape browser).
## It does this by periodically checking how many servers are waiting
## for a request. If there are fewer than MinSpareServers, it creates
## a new spare. If there are more than MaxSpareServers, some of the
## spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 1
## Number of servers to start initially --- should be a reasonable ballpark
## figure.
StartServers 1
## MaxRequestsPerChild: the number of requests each child process is
## allowed to process before the child dies. The child will exit so
## as to avoid problems after prolonged use when Apache (and maybe the
## libraries it uses) leak memory or other resources. On most systems, this
## isn't really needed, but a few (such as Solaris) do have notable leaks
## in the libraries. For these platforms, set to something like 10000
## or so; a setting of 0 means unlimited.
## NOTE: This value does not include keepalive requests after the initial
## request per connection. For example, if a child process handles
## an initial request and 10 subsequent "keptalive" requests, it
## would only count as 1 request towards this limit.
MaxRequestsPerChild 100000
## Dynamic Shared Object (DSO) Support
## To be able to use the functionality of a module which was built as a DSO you
## have to place corresponding `LoadModule' lines at this location so the
## directives contained in it are actually available before they are used.
## Please read the file http://httpd.apache.org/docs/dso.html for more
## details about the DSO mechanism and run `httpd -l' for the list of already
## built-in (statically linked and thus always available) modules in your httpd
## binary.
## Note: The order in which modules are loaded is important. Don't change
## the order below without expert advice.
## Example:
## LoadModule foo_module libexec/mod_foo.so
#### For Mac OS X Server: Note that the Server Admin application
#### and the apxs utility enable and disable modules
#### by removing and adding a comment character.
LoadModule authnfilemodule libexec/apache2/modauthnfile.so
#LoadModule authndbmmodule libexec/apache2/modauthndbm.so
#LoadModule authnanonmodule libexec/apache2/modauthnanon.so
#LoadModule authndbdmodule libexec/apache2/modauthndbd.so
#LoadModule authndefaultmodule libexec/apache2/modauthndefault.so
LoadModule authzhostmodule libexec/apache2/modauthzhost.so
#LoadModule authzgroupfilemodule libexec/apache2/modauthzgroupfile.so
#LoadModule authzusermodule libexec/apache2/modauthzuser.so
#LoadModule authzdbmmodule libexec/apache2/modauthzdbm.so
#LoadModule authzownermodule libexec/apache2/modauthzowner.so
#LoadModule authzdefaultmodule libexec/apache2/modauthzdefault.so
#LoadModule authbasicmodule libexec/apache2/modauthbasic.so
#LoadModule authdigest_applemodule libexec/apache2/modauth_digestapple.so
LoadModule cache_module libexec/apache2/mod_cache.so
LoadModule memcachemodule libexec/apache2/modmemcache.so
LoadModule diskcachemodule libexec/apache2/moddiskcache.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
LoadModule dumpio_module libexec/apache2/mod_dumpio.so
LoadModule extfiltermodule libexec/apache2/modextfilter.so
LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
LoadModule deflate_module libexec/apache2/mod_deflate.so
LoadModule logconfigmodule libexec/apache2/modlogconfig.so
LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
LoadModule ident_module libexec/apache2/mod_ident.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
#LoadModule proxyconnectmodule libexec/apache2/modproxyconnect.so
#LoadModule proxyftpmodule libexec/apache2/modproxyftp.so
LoadModule proxyhttpmodule libexec/apache2/modproxyhttp.so
#LoadModule proxyajpmodule libexec/apache2/modproxyajp.so
LoadModule proxybalancermodule libexec/apache2/modproxybalancer.so
LoadModule ssl_module libexec/apache2/mod_ssl.so
LoadModule mime_module libexec/apache2/mod_mime.so
#LoadModule mimemagicmodule libexec/apache2/modmimemagic.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
LoadModule asis_module libexec/apache2/mod_asis.so
LoadModule info_module libexec/apache2/mod_info.so
LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule davfsmodule libexec/apache2/moddavfs.so
LoadModule vhostaliasmodule libexec/apache2/modvhostalias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
LoadModule imagemap_module libexec/apache2/mod_imagemap.so
LoadModule actions_module libexec/apache2/mod_actions.so
LoadModule speling_module libexec/apache2/mod_speling.so
LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
#LoadModule php5_module libexec/apache2/libphp5.so
#LoadModule encoding_module libexec/apache2/mod_encoding.so
#LoadModule jk_module libexec/apache2/mod_jk.so
#LoadModule applespotlightmodule libexec/apache2/modspotlightapple.so
#LoadModule bonjour_module libexec/apache2/mod_bonjour.so
LoadModule appleauthmodule libexec/apache2/modauthapple.so
LoadModule spnegoauthmodule libexec/apache2/modspnegoapple.so
LoadModule appledigestmodule libexec/apache2/moddigestapple.so
LoadModule hfsapplemodule libexec/apache2/modhfsapple.so
#LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so
#LoadModule scgipubsubmodule libexec/apache2/modscgipubsub.so
#LoadModule davsvnmodule libexec/apache2/moddavsvn.so
#LoadModule authzsvnmodule libexec/apache2/modauthzsvn.so
## If you wish httpd to run as a different user or group, you must run
## httpd as root initially and it will switch.
## User/Group: The name (or #number) of the user/group to run httpd as.
## It is usually good practice to create a dedicated user and group for
## running httpd, as with most system services.
User www
Group www
## Each directory to which Apache has access, can be configured with respect
## to which services and features are allowed and/or disabled in that
## directory (and its subdirectories).
## First, we configure the "default" to be a very restrictive set of
## features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
## UserDir: The name of the directory which is appended onto a user's home
## directory if a ~user request is received.
#### For Mac OS X Server: Note that
#### personal websharing is not supported on Mac OS X Server.
<IfModule mod_userdir.c>
UserDir Sites
</IfModule>
## AccessFileName: The name of the file to look for in each directory
## for access control information.
AccessFileName .htaccess
## The following lines prevent .htaccess files from being viewed by
## Web clients.
#### For Mac OS X Server: Note the case-insensitive pattern, which protects
#### .htaccess fils on HFS volumes.
#### (Note: Denying .DS_S* may interfere with Finder WebDAV operation)
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
#### Block attempts to circumvent access controls by requesting forks.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
## DefaultType is the default MIME type the server will use for a document
## if it cannot otherwise determine one, such as from filename extensions.
## If your server contains mostly text or HTML documents, "text/plain" is
## a good value. If most of your content is binary, such as applications
## or images, you may want to use "application/octet-stream" instead to
## keep browsers from trying to display binary files as though they are
## text.
DefaultType text/plain
<IfModule mod_mime.c>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /dev/null
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddOutputFilter INCLUDES .shtml
## Although mod_mime may support several extensions following a single
## mime type (ex: "AddType video/quicktime qt mov"), the parser used
## by the Server Admin application expects only one extension per line.
AddHandler send-as-is asis
AddHandler cgi-script cgi
AddHandler fastcgi-script fcgi
AddHandler imap-file map
AddHandler server-parsed shtml
AddHandler type-map var
AddHandler spotlight-search spotlight
AddType application/andrew-inset ez
AddType application/atom+xml atom
AddType application/atomcat+xml atomcat
AddType application/atomsvc+xml atomsvc
AddType application/ccxml+xml ccxml
AddType application/davmount+xml davmount
AddType application/ecmascript ecma
AddType application/font-tdpfr pfr
AddType application/hyperstudio stk
AddType application/javascript js
AddType application/json json
AddType application/mac-binhex40 hqx
AddType application/mac-compactpro cpt
AddType application/marc mrc
AddType application/mathematica ma
AddType application/mathematica mb
AddType application/mathematica nb
AddType application/mathml+xml mathml
AddType application/mbox mbox
AddType application/mediaservercontrol+xml mscml
AddType application/mp4 mp4s
AddType application/msword doc
AddType application/msword dot
AddType application/mxf mxf
AddType application/octet-stream bin
AddType application/octet-stream bpk
AddType application/octet-stream class
AddType application/octet-stream dist
AddType application/octet-stream distz
AddType application/octet-stream dmg
AddType application/octet-stream dms
AddType application/octet-stream dump
AddType application/octet-stream elc
AddType application/octet-stream iso
AddType application/octet-stream lha
AddType application/octet-stream lzh
AddType application/octet-stream scpt
AddType application/octet-stream so
AddType application/oda oda
AddType application/ogg ogg
AddType application/pdf pdf
AddType application/pgp-encrypted pgp
AddType application/pgp-signature asc
AddType application/pgp-signature sig
AddType application/pics-rules prf
AddType application/pkcs10 p10
AddType application/pkcs7-mime p7c
AddType application/pkcs7-mime p7m
AddType application/pkcs7-signature p7s
AddType application/pkix-cert cer
AddType application/pkix-crl crl
AddType application/pkix-pkipath pkipath
AddType application/pkixcmp pki
AddType application/pls+xml pls
AddType application/postscript ai
AddType application/postscript eps
AddType application/postscript ps
AddType application/prs.cww cww
AddType application/rdf+xml rdf
AddType application/reginfo+xml rif
AddType application/relax-ng-compact-syntax rnc
AddType application/resource-lists+xml rl
AddType application/rls-services+xml rs
AddType application/rsd+xml rsd
AddType application/rss+xml rss
AddType application/rtf rtf
AddType application/sbml+xml sbml
AddType application/sdp sdp
AddType application/set-payment-initiation setpay
AddType application/set-registration-initiation setreg
AddType application/shf+xml shf
AddType application/smil+xml smi
AddType application/smil+xml smil
AddType application/srgs gram
AddType application/srgs+xml grxml
AddType application/ssml+xml ssml
AddType application/vnd.3gpp.pic-bw-large plb
AddType application/vnd.3gpp.pic-bw-small psb
AddType application/vnd.3gpp.pic-bw-var pvb
AddType application/vnd.3m.post-it-notes pwn
AddType application/vnd.accpac.simply.aso aso
AddType application/vnd.accpac.simply.imp imp
AddType application/vnd.acucobol acu
AddType application/vnd.acucorp acutc
AddType application/vnd.acucorp atc
AddType application/vnd.adobe.xdp+xml xdp
AddType application/vnd.adobe.xfdf xfdf
AddType application/vnd.amiga.ami ami
AddType application/vnd.anser-web-certificate-issue-initiation cii
AddType application/vnd.anser-web-funds-transfer-initiation fti
AddType application/vnd.antix.game-component atx
AddType application/vnd.apple.installer+xml mpkg
AddType application/vnd.apple.installer+xml pkg
AddType application/vnd.audiograph aep
AddType application/vnd.blueice.multipass mpm
AddType application/vnd.bmi bmi
AddType application/vnd.businessobjects rep
AddType application/vnd.chemdraw+xml cdxml
AddType application/vnd.chipnuts.karaoke-mmd mmd
AddType application/vnd.cinderella cdy
AddType application/vnd.claymore cla
AddType application/vnd.clonk.c4group c4d
AddType application/vnd.clonk.c4group c4f
AddType application/vnd.clonk.c4group c4g
AddType application/vnd.clonk.c4group c4p
AddType application/vnd.clonk.c4group c4u
AddType application/vnd.commonspace csp
AddType application/vnd.commonspace cst
AddType application/vnd.contact.cmsg cdbcmsg
AddType application/vnd.cosmocaller cmc
AddType application/vnd.crick.clicker clkx
AddType application/vnd.crick.clicker.keyboard clkk
AddType application/vnd.crick.clicker.palette clkp
AddType application/vnd.crick.clicker.template clkt
AddType application/vnd.crick.clicker.wordbank clkw
AddType application/vnd.criticaltools.wbs+xml wbs
AddType application/vnd.ctc-posml pml
AddType application/vnd.cups-ppd ppd
AddType application/vnd.curl curl
AddType application/vnd.data-vision.rdz rdz
AddType application/vnd.denovo.fcselayout-link fe_launch
AddType application/vnd.dna dna
AddType application/vnd.dolby.mlp mlp
AddType application/vnd.dpgraph dpg
AddType application/vnd.dreamfactory dfac
AddType application/vnd.ecowin.chart mag
AddType application/vnd.enliven nml
AddType application/vnd.epson.esf esf
AddType application/vnd.epson.msf msf
AddType application/vnd.epson.quickanime qam
AddType application/vnd.epson.salt slt
AddType application/vnd.epson.ssf ssf
AddType application/vnd.eszigno3+xml es3 et3
AddType application/vnd.ezpix-album ez2
AddType application/vnd.ezpix-package ez3
AddType application/vnd.fdf fdf
AddType application/vnd.flographit gph
AddType application/vnd.fluxtime.clip ftc
AddType application/vnd.framemaker fm
AddType application/vnd.framemaker frame
AddType application/vnd.framemaker maker
AddType application/vnd.frogans.fnc fnc
AddType application/vnd.frogans.ltf ltf
AddType application/vnd.fsc.weblaunch fsc
AddType application/vnd.fujitsu.oasys oas
AddType application/vnd.fujitsu.oasys2 oa2
AddType application/vnd.fujitsu.oasys3 oa3
AddType application/vnd.fujitsu.oasysgp fg5
AddType application/vnd.fujitsu.oasysprs bh2
AddType application/vnd.fujixerox.ddd ddd
AddType application/vnd.fujixerox.docuworks xdw
AddType application/vnd.fujixerox.docuworks.binder xbd
AddType application/vnd.fuzzysheet fzs
AddType application/vnd.genomatix.tuxedo txd
AddType application/vnd.google-earth.kml+xml kml
AddType application/vnd.google-earth.kmz kmz
AddType application/vnd.grafeq gqf
AddType application/vnd.grafeq gqs
AddType application/vnd.groove-account gac
AddType application/vnd.groove-help ghf
AddType application/vnd.groove-identity-message gim
AddType application/vnd.groove-injector grv
AddType application/vnd.groove-tool-message gtm
AddType application/vnd.groove-tool-template tpl
AddType application/vnd.groove-vcard vcg
AddType application/vnd.handheld-entertainment+xml zmm
AddType application/vnd.hbci hbci
AddType application/vnd.hhe.lesson-player les
AddType application/vnd.hp-hpgl hpgl
AddType application/vnd.hp-hpid hpid
AddType application/vnd.hp-hps hps
AddType application/vnd.hp-jlyt jlt
AddType application/vnd.hp-pcl pcl
AddType application/vnd.hp-pclxl pclxl
AddType application/vnd.hzn-3d-crossword x3d
AddType application/vnd.ibm.minipay mpy
AddType application/vnd.ibm.modcap afp
AddType application/vnd.ibm.modcap list3820
AddType application/vnd.ibm.modcap listafp
AddType application/vnd.ibm.rights-management irm
AddType application/vnd.ibm.secure-container sc
AddType application/vnd.igloader igl
AddType application/vnd.immervision-ivp ivp
AddType application/vnd.immervision-ivu ivu
AddType application/vnd.intercon.formnet xpw
AddType application/vnd.intercon.formnet xpx
AddType application/vnd.intu.qbo qbo
AddType application/vnd.intu.qfx qfx
AddType application/vnd.ipunplugged.rcprofile rcprofile
AddType application/vnd.irepository.package+xml irp
AddType application/vnd.is-xpr xpr
AddType application/vnd.jam jam
AddType application/vnd.jcp.javame.midlet-rms rms
AddType application/vnd.jisp jisp
AddType application/vnd.kahootz ktr
AddType application/vnd.kahootz ktz
AddType application/vnd.kde.karbon karbon
AddType application/vnd.kde.kchart chrt
AddType application/vnd.kde.kformula kfo
AddType application/vnd.kde.kivio flw
AddType application/vnd.kde.kontour kon
AddType application/vnd.kde.kpresenter kpr
AddType application/vnd.kde.kpresenter kpt
AddType application/vnd.kde.kspread ksp
AddType application/vnd.kde.kword kwd
AddType application/vnd.kde.kword kwt
AddType application/vnd.kenameaapp htke
AddType application/vnd.kidspiration kia
AddType application/vnd.kinar kne
AddType application/vnd.kinar knp
AddType application/vnd.koan skd
AddType application/vnd.koan skm
AddType application/vnd.koan skp
AddType application/vnd.koan skt
AddType application/vnd.llamagraphics.life-balance.desktop lbd
AddType application/vnd.llamagraphics.life-balance.exchange+xml lbe
AddType application/vnd.lotus-1-2-3 123
AddType application/vnd.lotus-approach apr
AddType application/vnd.lotus-freelance pre
AddType application/vnd.lotus-notes nsf
AddType application/vnd.lotus-organizer org
AddType application/vnd.lotus-screencam scm
AddType application/vnd.lotus-wordpro lwp
AddType application/vnd.macports.portpkg portpkg
AddType application/vnd.mcd mcd
AddType application/vnd.medcalcdata mc1
AddType application/vnd.mediastation.cdkey cdkey
AddType application/vnd.mfer mwf
AddType application/vnd.mfmp mfm
AddType application/vnd.micrografx.flo flo
AddType application/vnd.micrografx.igx igx
AddType application/vnd.mif mif
AddType application/vnd.mobius.daf daf
AddType application/vnd.mobius.dis dis
AddType application/vnd.mobius.mbk mbk
AddType application/vnd.mobius.mqy mqy
AddType application/vnd.mobius.msl msl
AddType application/vnd.mobius.plc plc
AddType application/vnd.mobius.txf txf
AddType application/vnd.mophun.application mpn
AddType application/vnd.mophun.certificate mpc
AddType application/vnd.mozilla.xul+xml xul
AddType application/vnd.ms-artgalry cil
AddType application/vnd.ms-asf asf
AddType application/vnd.ms-cab-compressed cab
AddType application/vnd.ms-excel xla
AddType application/vnd.ms-excel xlc
AddType application/vnd.ms-excel xlm
AddType application/vnd.ms-excel xls
AddType application/vnd.ms-excel xlt
AddType application/vnd.ms-excel xlw
AddType application/vnd.ms-fontobject eot
AddType application/vnd.ms-htmlhelp chm
AddType application/vnd.ms-ims ims
AddType application/vnd.ms-lrm lrm
AddType application/vnd.ms-powerpoint pot
AddType application/vnd.ms-powerpoint pps
AddType application/vnd.ms-powerpoint ppt
AddType application/vnd.ms-project mpp
AddType application/vnd.ms-project mpt
AddType application/vnd.ms-works wcm
AddType application/vnd.ms-works wdb
AddType application/vnd.ms-works wks
AddType application/vnd.ms-works wps
AddType application/vnd.ms-wpl wpl
AddType application/vnd.ms-xpsdocument xps
AddType application/vnd.mseq mseq
AddType application/vnd.musician mus
AddType application/vnd.neurolanguage.nlu nlu
AddType application/vnd.noblenet-directory nnd
AddType application/vnd.noblenet-sealer nns
AddType application/vnd.noblenet-web nnw
AddType application/vnd.nokia.n-gage.data ngdat
AddType application/vnd.nokia.n-gage.symbian.install n-gage
AddType application/vnd.nokia.radio-preset rpst
AddType application/vnd.nokia.radio-presets rpss
AddType application/vnd.novadigm.edm edm
AddType application/vnd.novadigm.edx edx
AddType application/vnd.novadigm.ext ext
AddType application/vnd.oasis.opendocument.chart odc
AddType application/vnd.oasis.opendocument.chart-template otc
AddType application/vnd.oasis.opendocument.formula odf
AddType application/vnd.oasis.opendocument.formula-template otf
AddType application/vnd.oasis.opendocument.graphics odg
AddType application/vnd.oasis.opendocument.graphics-template otg
AddType application/vnd.oasis.opendocument.image odi
AddType application/vnd.oasis.opendocument.image-template oti
AddType application/vnd.oasis.opendocument.presentation odp
AddType application/vnd.oasis.opendocument.presentation-template otp
AddType application/vnd.oasis.opendocument.spreadsheet ods
AddType application/vnd.oasis.opendocument.spreadsheet-template ots
AddType application/vnd.oasis.opendocument.text odt
AddType application/vnd.oasis.opendocument.text-master otm
AddType application/vnd.oasis.opendocument.text-template ott
AddType application/vnd.oasis.opendocument.text-web oth
AddType application/vnd.olpc-sugar xo
AddType application/vnd.oma.dd2+xml dd2
AddType application/vnd.openofficeorg.extension oxt
AddType application/vnd.osgi.dp dp
AddType application/vnd.palm oprc
AddType application/vnd.palm pdb
AddType application/vnd.palm pqa
AddType application/vnd.palm prc
AddType application/vnd.pg.format str
AddType application/vnd.pg.osasli ei6
AddType application/vnd.picsel efif
AddType application/vnd.pocketlearn plf
AddType application/vnd.powerbuilder6 pbd
AddType application/vnd.previewsystems.box box
AddType application/vnd.proteus.magazine mgz
AddType application/vnd.publishare-delta-tree qps
AddType application/vnd.pvi.ptid1 ptid
AddType application/vnd.quark.quarkxpress qwd
AddType application/vnd.quark.quarkxpress qwt
AddType application/vnd.quark.quarkxpress qxb
AddType application/vnd.quark.quarkxpress qxd
AddType application/vnd.quark.quarkxpress qxl
AddType application/vnd.quark.quarkxpress qxt
AddType application/vnd.recordare.musicxml mxl
# AddType application/vnd.rn-realmedia rm
AddType application/vnd.seemail see
AddType application/vnd.sema sema
AddType application/vnd.semd semd
AddType application/vnd.semf semf
AddType application/vnd.shana.informed.formdata ifm
AddType application/vnd.shana.informed.formtemplate itp
AddType application/vnd.shana.informed.interchange iif
AddType application/vnd.shana.informed.package ipk
AddType application/vnd.simtech-mindmapper twd
AddType application/vnd.simtech-mindmapper twds
AddType application/vnd.smaf mmf
AddType application/vnd.solent.sdkm+xml sdkd
AddType application/vnd.solent.sdkm+xml sdkm
AddType application/vnd.spotfire.dxp dxp
AddType application/vnd.spotfire.sfs sfs
AddType application/vnd.sus-calendar sus
AddType application/vnd.sus-calendar susp
AddType application/vnd.svd svd
AddType application/vnd.syncml+xml xsm
AddType application/vnd.syncml.dm+wbxml bdm
AddType application/vnd.syncml.dm+xml xdm
AddType application/vnd.tao.intent-module-archive tao
AddType application/vnd.tmobile-livetv tmo
AddType application/vnd.trid.tpt tpt
AddType application/vnd.triscape.mxs mxs
AddType application/vnd.trueapp tra
AddType application/vnd.ufdl ufd
AddType application/vnd.ufdl ufdl
AddType application/vnd.uiq.theme utz
AddType application/vnd.umajin umj
AddType application/vnd.unity unityweb
AddType application/vnd.uoml+xml uoml
AddType application/vnd.vcx vcx
AddType application/vnd.visio vsd
AddType application/vnd.visio vss
AddType application/vnd.visio vst
AddType application/vnd.visio vsw
AddType application/vnd.visionary vis
AddType application/vnd.vsf vsf
AddType application/vnd.wap.wbxml wbxml
AddType application/vnd.wap.wmlc wmlc
AddType application/vnd.wap.wmlscriptc wmlsc
AddType application/vnd.webturbo wtb
AddType application/vnd.wordperfect wpd
AddType application/vnd.wqd wqd
AddType application/vnd.wt.stf stf
AddType application/vnd.xara xar
AddType application/vnd.xfdl xfdl
AddType application/vnd.yamaha.hv-dic hvd
AddType application/vnd.yamaha.hv-script hvs
AddType application/vnd.yamaha.hv-voice hvp
AddType application/vnd.yamaha.smaf-audio saf
AddType application/vnd.yamaha.smaf-phrase spf
AddType application/vnd.yellowriver-custom-menu cmp
AddType application/vnd.zzazz.deck+xml zaz
AddType application/voicexml+xml vxml
AddType application/winhlp hlp
AddType application/wsdl+xml wsdl
AddType application/wspolicy+xml wspolicy
AddType application/x-ace-compressed ace
AddType application/x-bcpio bcpio
AddType application/x-bittorrent torrent
AddType application/x-bzip bz
AddType application/x-bzip2 boz
AddType application/x-bzip2 bz2
AddType application/x-cdlink vcd
AddType application/x-chat chat
AddType application/x-chess-pgn pgn
AddType application/x-cpio cpio
AddType application/x-csh csh
AddType application/x-director dcr
AddType application/x-director dir
AddType application/x-director dxr
AddType application/x-director fgd
AddType application/x-dvi dvi
AddType application/x-futuresplash spl
AddType application/x-gtar gtar
AddType application/x-hdf hdf
AddType application/x-httpd-php php
AddType application/x-httpd-php-source phps
AddType application/x-httpd-php3 php3
AddType application/x-java-jnlp-file jnlp
AddType application/x-latex latex
AddType application/x-ms-wmd wmd
AddType application/x-ms-wmz wmz
AddType application/x-msaccess mdb
AddType application/x-msbinder obd
AddType application/x-mscardfile crd
AddType application/x-msclip clp
AddType application/x-msdownload bat
AddType application/x-msdownload com
AddType application/x-msdownload dll
AddType application/x-msdownload exe
AddType application/x-msdownload msi
AddType application/x-msmediaview m13
AddType application/x-msmediaview m14
AddType application/x-msmediaview mvb
AddType application/x-msmetafile wmf
AddType application/x-msmoney mny
AddType application/x-mspublisher pub
AddType application/x-msschedule scd
AddType application/x-msterminal trm
AddType application/x-mswrite wri
AddType application/x-netcdf cdf
AddType application/x-netcdf nc
AddType application/x-pkcs12 p12
AddType application/x-pkcs12 pfx
AddType application/x-pkcs7-certificates p7b
AddType application/x-pkcs7-certificates spc
AddType application/x-pkcs7-certreqresp p7r
AddType application/x-quicktimeplayer qtl
AddType application/x-rar-compressed rar
AddType application/x-sh sh
AddType application/x-shar shar
AddType application/x-shockwave-flash swf
AddType application/x-stuffit sit
AddType application/x-stuffitx sitx
AddType application/x-sv4cpio sv4cpio
AddType application/x-sv4crc sv4crc
AddType application/x-tar tar
AddType application/x-tar tgz
AddType application/x-tcl tcl
AddType application/x-tex tex
AddType application/x-texinfo texi
AddType application/x-texinfo texinfo
AddType application/x-ustar ustar
AddType application/x-wais-source src
AddType application/x-x509-ca-cert crt
AddType application/x-x509-ca-cert der
AddType application/xenc+xml xenc
AddType application/xhtml+xml xht
AddType application/xhtml+xml xhtm
AddType application/xhtml+xml xhtml
AddType application/xml xml
AddType application/xml xsl
AddType application/xml-dtd dtd
AddType application/xop+xml xop
AddType application/xslt+xml xslt
AddType application/xspf+xml xspf
AddType application/xv+xml mxml
AddType application/xv+xml xhvml
AddType application/xv+xml xvm
AddType application/xv+xml xvml
AddType application/zip zip
AddType audio/basic au
AddType audio/basic snd
AddType audio/midi kar
AddType audio/midi mid
AddType audio/midi midi
AddType audio/midi rmi
AddType audio/mp4 mp4a
AddType audio/mp4a-latm m4a
AddType audio/mp4a-latm m4p
AddType audio/mpeg m2a
AddType audio/mpeg m3a
AddType audio/mpeg mp2
AddType audio/mpeg mp2a
AddType audio/mpeg mp3
AddType audio/mpeg mpga
AddType audio/vnd.digital-winds eol
AddType audio/vnd.lucent.voice lvp
AddType audio/vnd.nuera.ecelp4800 ecelp4800
AddType audio/vnd.nuera.ecelp7470 ecelp7470
AddType audio/vnd.nuera.ecelp9600 ecelp9600
AddType audio/wav wav
AddType audio/x-aiff aif
AddType audio/x-aiff aifc
AddType audio/x-aiff aiff
AddType audio/x-m4a m4a
AddType audio/x-mpegurl m3u
AddType audio/x-ms-wax wax
AddType audio/x-ms-wma wma
AddType audio/x-pn-realaudio ra
AddType audio/x-pn-realaudio ram
AddType audio/x-pn-realaudio rm
AddType audio/x-pn-realaudio-plugin rmp
AddType audio/x-scpls pls
AddType audio/x-wav wav
AddType chemical/x-cdx cdx
AddType chemical/x-cif cif
AddType chemical/x-cmdf cmdf
AddType chemical/x-cml cml
AddType chemical/x-csml csml
AddType chemical/x-pdb pdb
AddType chemical/x-xyz xyz
AddType image/bmp bmp
AddType image/cgm cgm
AddType image/g3fax g3
AddType image/gif gif
AddType image/ief ief
AddType image/jp2 jp2
AddType image/jpeg jpe
AddType image/jpeg jpeg
AddType image/jpeg jpg
AddType image/pict pct
AddType image/pict pic
AddType image/pict pict
AddType image/png png
AddType image/prs.btif btif
AddType image/svg+xml svg
AddType image/svg+xml svgz
AddType image/tiff tif
AddType image/tiff tiff
AddType image/vnd.adobe.photoshop psd
AddType image/vnd.djvu djv
AddType image/vnd.djvu djvu
AddType image/vnd.dwg dwg
AddType image/vnd.dxf dxf
AddType image/vnd.fastbidsheet fbs
AddType image/vnd.fpx fpx
AddType image/vnd.fst fst
AddType image/vnd.fujixerox.edmics-mmr mmr
AddType image/vnd.fujixerox.edmics-rlc rlc
AddType image/vnd.microsoft.icon ico
AddType image/vnd.ms-modi mdi
AddType image/vnd.net-fpx npx
AddType image/vnd.wap.wbmp wbmp
AddType image/vnd.xiff xif
AddType image/x-cmu-raster ras
AddType image/x-cmx cmx
AddType image/x-macpaint mac
AddType image/x-macpaint pnt
AddType image/x-macpaint pntg
AddType image/x-pcx pcx
AddType image/x-pict pct
AddType image/x-pict pic
AddType image/x-portable-anymap pnm
AddType image/x-portable-bitmap pbm
AddType image/x-portable-graymap pgm
AddType image/x-portable-pixmap ppm
AddType image/x-quicktime qti
AddType image/x-quicktime qtif
AddType image/x-rgb rgb
AddType image/x-xbitmap xbm
AddType image/x-xpixmap xpm
AddType image/x-xwindowdump xwd
AddType message/rfc822 eml
AddType message/rfc822 mime
AddType model/iges iges
AddType model/iges igs
AddType model/mesh mesh
AddType model/mesh msh
AddType model/mesh silo
AddType model/vnd.dwf dwf
AddType model/vnd.gdl gdl
AddType model/vnd.gtw gtw
AddType model/vnd.mts mts
AddType model/vnd.vtu vtu
AddType model/vrml vrml
AddType model/vrml wrl
AddType text/calendar ics
AddType text/calendar ifb
AddType text/css css
AddType text/csv csv
AddType text/html htm
AddType text/html html
AddType text/html shtml
AddType text/plain asc
AddType text/plain conf
AddType text/plain def
AddType text/plain in
AddType text/plain list
AddType text/plain log
AddType text/plain text
AddType text/plain txt
AddType text/prs.lines.tag dsc
AddType text/richtext rtx
AddType text/rtf rtf
AddType text/sgml sgm
AddType text/sgml sgml
AddType text/tab-separated-values tsv
AddType text/troff man
AddType text/troff me
AddType text/troff ms
AddType text/troff roff
AddType text/troff t
AddType text/troff tr
AddType text/uri-list uri
AddType text/uri-list uris
AddType text/uri-list urls
AddType text/vnd.fly fly
AddType text/vnd.fmi.flexstor flx
AddType text/vnd.in3d.3dml 3dml
AddType text/vnd.in3d.spot spot
AddType text/vnd.sun.j2me.app-descriptor jad
AddType text/vnd.wap.wml wml
AddType text/vnd.wap.wmlscript wmls
AddType text/x-asm s
AddType text/x-asm sm
AddType text/x-c c
AddType text/x-c cc
AddType text/x-c cpp
AddType text/x-c cxx
AddType text/x-c dic
AddType text/x-c h
AddType text/x-c hh
AddType text/x-fortran f
AddType text/x-fortran f77
AddType text/x-fortran f90
AddType text/x-fortran for
AddType text/x-java-source java
AddType text/x-pascal p
AddType text/x-pascal pas
AddType text/x-setext etx
AddType text/x-uuencode uu
AddType text/x-vcalendar vcs
AddType text/x-vcard vcf
AddType video/3gp2 3gp2
AddType video/3gpp 3gp
AddType video/3gpp 3gpp
AddType video/3gpp2 3g2
AddType video/h261 h261
AddType video/h263 h263
AddType video/h264 h264
AddType video/jpeg jpgv
AddType video/jpm jpgm
AddType video/jpm jpm
AddType video/mj2 mj2
AddType video/mj2 mjp2
AddType video/mp4 m4v
AddType video/mp4 mp4
AddType video/mp4 mp4v
AddType video/mp4 mpg4
AddType video/mpeg m1v
AddType video/mpeg m2v
AddType video/mpeg mpe
AddType video/mpeg mpeg
AddType video/mpeg mpg
AddType video/quicktime mov
AddType video/quicktime qt
AddType video/vnd.fvt fvt
AddType video/vnd.mpegurl m4u
AddType video/vnd.mpegurl mxu
AddType video/vnd.vivo viv
AddType video/x-dv dif
AddType video/x-dv dv
AddType video/x-fli fli
AddType video/x-ms-asf asf
AddType video/x-ms-asf asx
AddType video/x-ms-wm wm
AddType video/x-ms-wmv wmv
AddType video/x-ms-wmx wmx
AddType video/x-ms-wvx wvx
AddType video/x-msvideo avi
AddType video/x-sgi-movie movie
AddType x-conference/x-cooltalk ice
# Settings for hosting different languages.
# Required modules: mod_mime, mod_negotiation
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
#Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
</IfModule>
## The modmimemagic module allows the server to use various hints from the
## contents of the file itself to determine its type. The MIMEMagicFile
## directive tells the module where the hint definitions are located.
<IfModule modmimemagic.c>
MIMEMagicFile /etc/apache2/magic
</IfModule>
## HostnameLookups: Log the names of clients or just their IP addresses
## e.g., www.apache.org (on) or 204.62.129.132 (off).
## The default is off because it'd be overall better for the net if people
## had to knowingly turn this feature on, since enabling it means that
## each client request will result in AT LEAST one lookup request to the
## nameserver.
HostnameLookups Off
## LogLevel: Control the number of messages logged to the error_log.
## Possible values include: debug, info, notice, warn, error, crit,
## alert, emerg.
LogLevel warn
<IfModule modlogconfig.c>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
<IfModule mod_logio.c>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
#### For Mac OS X Server: Server Admin manages CustomLog directives
#### on a virtual host basis.
#CustomLog /var/log/apache2/access_log common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache2/access_log combined
</IfModule>
## Optionally add a line containing the server version and virtual host
## name to server-generated pages (error documents, FTP directory listings,
## mod_status and mod_info output etc., but not CGI generated documents).
## Set to "EMail" to also include a mailto: link to the ServerAdmin.
## Set to one of: On | Off | EMail
ServerSignature On
UseCanonicalName Off
## Aliases: Add here as many aliases as you need (with no limit). The format is
## Alias fakename realname
<IfModule mod_alias.c>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"
#### For Mac OS X Server: Uncomment this line to enable web-based
#### configuration of mailman:
#Include /etc/apache2/httpd_mailman.conf
<IfModule mod_setenvif.c>
<IfModule mod_negotiation.c>
# Allow convenient access to Apache manual
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru))?(/.*)?$ "/Library/WebServer/share/httpd/manual$1"
<Directory "/Library/WebServer/share/httpd/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru)){2,}(/.*)?$ /manual/$1$2
LanguagePriority en de es fr ja ko pt-br ru ForceLanguagePriority Prefer Fallback
</Directory>
</IfModule>
</IfModule>
</IfModule>
## Directives controlling the display of server-generated directory listings.
#### For Mac OS X Server: Note that indexing is further controlled
#### by the Server Admin application, which adds "Options +/-Indexes
#### in the virtual host scope.
<IfModule mod_autoindex.c>
## FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
## AddIcon* directives tell the server which icon to show for different
## files or filename extensions. These are only displayed for
## FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
## DefaultIcon is which icon to show for files which do not have an icon
## explicitly set.
DefaultIcon /icons/unknown.gif
## AddDescription allows you to place a short description after a file in
## server-generated indexes. These are only displayed for FancyIndexed
## directories.
## Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#AddDescription "Mac OS Disk Image file" .dmg
## ReadmeName is the name of the README file the server will look for by
## default, and append to directory listings.
## HeaderName is the name of a file which should be prepended to
## directory indexes.
## If MultiViews are amongst the Options in effect, the server will
## first look for name.html and include it if found. If name.html
## doesn't exist, the server will then look for name.txt and include
## it as plaintext if found.
ReadmeName README
HeaderName HEADER
## IndexIgnore is a set of filenames which directory indexing should ignore
## and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
## MetaDir: specifies the name of the directory in which Apache can find
## meta information files. These files contain additional HTTP headers
## to include when sending the document
#MetaDir .web
## MetaSuffix: specifies the file name suffix for the file containing the
## meta information.
#MetaSuffix .meta
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# The configuration below implements multi-language error documents through
# content-negotiation, and via the default Alias for /error in the vhost config file.
<Directory "/usr/share/httpd/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTPBADREQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTPNOTFOUND.html.var
ErrorDocument 405 /error/HTTPMETHOD_NOTALLOWED.html.var
ErrorDocument 408 /error/HTTPREQUEST_TIMEOUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTPLENGTHREQUIRED.html.var
ErrorDocument 412 /error/HTTPPRECONDITIONFAILED.html.var
ErrorDocument 413 /error/HTTPREQUEST_ENTITY_TOOLARGE.html.var
ErrorDocument 414 /error/HTTPREQUEST_URI_TOOLARGE.html.var
ErrorDocument 415 /error/HTTPUNSUPPORTED_MEDIATYPE.html.var
ErrorDocument 500 /error/HTTPINTERNAL_SERVERERROR.html.var
ErrorDocument 501 /error/HTTPNOTIMPLEMENTED.html.var
ErrorDocument 502 /error/HTTPBADGATEWAY.html.var
ErrorDocument 503 /error/HTTPSERVICEUNAVAILABLE.html.var
ErrorDocument 506 /error/HTTPVARIANT_ALSOVARIES.html.var
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
</IfModule>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
#<IfModule mod_info.c>
# <Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Location>
#</IfModule>
## Proxy Server directives.
<IfModule mod_proxy.c>
ProxyRequests Off
<IfModule moddiskcache.c>
CacheEnable disk /
CacheRoot "/var/run/proxy"
</IfModule>
</IfModule>
## SSL stuff
<IfModule mod_ssl.c>
SetEnvIf User-Agent ".MSIE." nokeepalive ssl-unclean-shutdown
SSLPassPhraseDialog exec:/etc/apache2/getsslpassphrase
SSLSessionCache shmcb:/var/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
SSLMutex file:/var/log/apache2/ssl_mutex
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
AddType application/x-x509-ca-cert crt
AddType application/x-pkcs7-crl crl
</IfModule>
<IfModule mod_jk.c>
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
JkLogLevel error
JkMount /*.jsp JBoss1
JkMount /servlet/* JBoss1
JkMount /examples/* JBoss1
</IfModule>
## The default server is used for status on a special port
#ServerName www.example.com
Listen 127.0.0.1:9010
DocumentRoot "/var/empty"
ErrorLog "/var/log/apache2/error_log"
<Directory /var/empty>
Order Deny,Allow
Deny from All
</Directory>
<IfModule modspotlightapple2.c>
Spotlight On
</IfModule>
<IfModule modauth_digestapple.c>
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
</IfModule>
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
</IfModule>
<IfModule mod_headers.c>
Header add MS-Author-Via "DAV"
RequestHeader set XFORWARDEDPROTO 'https' env=https
</IfModule>
<IfModule mod_encoding.c>
EncodingEngine on
NormalizeUsername on
DefaultClientEncoding UTF-8
# Windows XP?
AddClientEncoding "Microsoft-WebDAV-MiniRedir/" MSUTF-8
# Windows 2K SP2 with .NET
AddClientEncoding "(Microsoft .* DAV\$)" MSUTF-8
# Windows 2K SP2/Windows XP
AddClientEncoding "(Microsoft .* DAV 1.1)" CP932
# Windows XP?
AddClientEncoding "Microsoft-WebDAV*" CP932
# RealPlayer
AddClientEncoding "RMA/*" CP932
# MacOS X webdavfs
AddClientEncoding "WebDAVFS" UTF-8
# cadaver
AddClientEncoding "cadaver/" EUC-JP
</IfModule>
RLimitNPROC max max
ExtendedStatus On
Timeout 300
KeepAlive On
MaxKeepAliveRequests 500
KeepAliveTimeout 15
# As of Mac OS X Server 10.5, the compiled-in server limit is 2048
ServerLimit 2048
# Server Admin manages ListenBackLog as a function of MaxClients: min(511, MaxClients/2)
MaxClients 1024
ListenBackLog 512
# Including WebObjects Configs
Include /System/Library/WebObjects/Adaptors/Apache2.2/apache.conf
#### The following Include directive is essential for the virtual hosts to be usable.
Include "/etc/apache2/sites/*.conf"
========HTTPD.CONF==========I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code> -
Record time duration for fax in vxml
I am going to get the time duration used for fax sending in vxml:
<transfer name="mycall" destexpr="'fax://' + phone_num" bridge="false" connecttimeout="120s" maxtime="180s" cisco-longpound="true" cisco-mailtoaddress="'xxxx'" >
<catch event="telephone.disconnect.transfer">
<assign name="mydur" expr="mycall$.duration"/>
<goto next="#timeCount"/>
</catch>
</transfer>
<var name="startTime" expr="new Date();"/>
<var name="endTime"/>
<form id="timeCount">
<block>
<assign name="document.startTime" expr="startTime.getTime();"/>
<assign name="document.startTime" expr="Number(startTime);"/>
<assign name="document.endTime" expr="new Date();"/>
<assign name="document.endTime" expr="endTime.getTime();"/>
<assign name="document.endTime" expr="Number(endTime);"/>
<assign name="mydur" expr="document.endTime - document.startTime;"/>
</block>
</form>
But mycall$.duration is 0 after transferring fax.
And even if I use codes to count time duration, the duration, mydur, is about the same regardless of the number of pages sent.
Is it possible to use vxml to record time duration of fax?
Thank you!Paste the following Config:
sh ver
sh run
debug of one call demonstrating the problem :
debug voip ivr all
debug vxml all -
Problem with ClassCastException
I have a typical problem...I have a method which accepts Object as a parameter and I would like to convert that into an object of class (SoapRequestDS). Calling tostring on the argument correctly shows that the object is of type SoapRequestDS. But when I try to cast it to SoapRequestDS, it throws up ClassCastException.
The SoapRequestDS class is user defined class.
The Object is coming from a vxml page which uses Object tag to call the java application. The vxml project references the jar file.I am posting the code and the output....
Code:
public void setRequest(Object arg_req) throws ClassCastException
try
System.out.println("Correct Method" + arg_req.getClass().getName());
System.out.println("Correct Method" + arg_req.toString());
Method[] methods=arg_req.getClass().getMethods();
System.out.println(methods[0].getName());
//SoapRequest=new SoapRequestDS();
SoapRequest=new Object();
SoapRequest= arg_req;
System.out.println(SoapRequest.getClass().getName());
if (arg_req instanceof SoapRequestDS) {
System.out.println("Correct");
//type new_name = (type) name;
System.out.println("Not Correct");
//SoapRequest=(SoapRequestDS)arg_req;
catch(ClassCastException e)
System.out.println("Class cast exception" + e);
Output
Correct MethodSoapRequestDS
Correct MethodSoapRequestDS@4a5435a2
getRequestDS
SoapRequestDS
Not Correct
SoapRequestDS -
CVP VXML Server Service Terminated Intermittently
Hi, all.
Recently we have implemented the ICM 7.5 with CUCM 7.1 and CVP 7.0(2). We have encountered strange problem whereby the VXML Server service in the CVP server (Call Server co-resident with VXML Server) terrminated intermittently. This problem happens even where the call volume to the hotline is low. However it happens more often when there is an influx of call volume.
Has opened a TAC case and the TAC has mentioned that it could be due to the hardware issue. We are using MCS-7845-I3-CCE1 for the CVP server. However, according to the TAC, the supported hardware based on the latest CVP BOM 7.0(2) are:
MCS-7845-I3-CCE2
MCS-7845-H2-CCE2/CCE3/CCE4
MCS-7845-I2-CCE2/CCE3/CCE4
But before implementing the system, we have gone through the CVP BOM released at that point of time and it stated that MCS-7845-I3-CCE1 was supported.
Anyone has encountered the similar problem? Is it really due to the hardware issue? Appreciate any advice and reply. Thanks in advanced.
Regards,
EricTo add to that, ES22 for CVP7.0(2) will update JRE shipped with CVP to JRE 1.5 update 19 to avoid JRE crashes.
Thanks,
Hitesh Patel -
Hi,
I am fancing some problems with jaxb compilation of voiceXML schemas. They seem to be realy complicated and jaxb does not do all the expected job. Perhaps it is just a matter of bindings, but I guess not.
Schemas are there : http://www.w3.org/TR/2004/REC-voicexml20-20040316/vxml-schema.zip
and here is my binding :
<jxb:bindings version="1.0" xmlns:jxb="http://java.sun.com/xml/ns/jaxb" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<jxb:bindings schemaLocation="vxml.xsd" node="/xs:schema">
<jxb:bindings node="//xs:element[@name='meta']">
<jxb:class name="MainMeta"/>
</jxb:bindings>
<jxb:bindings node="//xs:element[@name='metadata']">
<jxb:class name="MainMetadata"/>
</jxb:bindings>
</jxb:bindings>
</jxb:bindings>The problem is that jaxb only creates a single method to add childs to, for exemple, the Vxml.java. But it should not, it should add a method by kind of child like: .getForm(), .getProperty(), .getMeta() and so on.
The only method created by jaxb is called getCatchOrHelpOrNoinput() which is the name of 3 elements of the <vxml> tag, but not the only ones.
So if a master of the discipline could help ... because it is a realy weird behaviour.
Regards,
PS: I am using jaxb 2.0 eaHi,
I am fancing some problems with jaxb compilation of voiceXML schemas. They seem to be realy complicated and jaxb does not do all the expected job. Perhaps it is just a matter of bindings, but I guess not.
Schemas are there : http://www.w3.org/TR/2004/REC-voicexml20-20040316/vxml-schema.zip
and here is my binding :
<jxb:bindings version="1.0" xmlns:jxb="http://java.sun.com/xml/ns/jaxb" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<jxb:bindings schemaLocation="vxml.xsd" node="/xs:schema">
<jxb:bindings node="//xs:element[@name='meta']">
<jxb:class name="MainMeta"/>
</jxb:bindings>
<jxb:bindings node="//xs:element[@name='metadata']">
<jxb:class name="MainMetadata"/>
</jxb:bindings>
</jxb:bindings>
</jxb:bindings>The problem is that jaxb only creates a single method to add childs to, for exemple, the Vxml.java. But it should not, it should add a method by kind of child like: .getForm(), .getProperty(), .getMeta() and so on.
The only method created by jaxb is called getCatchOrHelpOrNoinput() which is the name of 3 elements of the <vxml> tag, but not the only ones.
So if a master of the discipline could help ... because it is a realy weird behaviour.
Regards,
PS: I am using jaxb 2.0 ea -
Hi
I am presently facing a problem with a NRFU Test case in which when the nic of CVP(Active lic server) is unplugged the new calls placed are not failing over to the CVP (Redundant port server).We are running on a comprehensive setup with multi site env.The same cases with services got down(Call and Vxml) on active server the failover is happening fine.Some other scenarious like shutting the active dial-peer and checking if calls are serviced at 2nd CVP too works fine.
The ICM is on 7.5(7),CVP on 7.0(2) with ES of CVP7.0.2_ES22,CVP7.0.2_ES27 and CVP7.0.2_ES29 upgraded,CVP OPS Console 7.0(2) and gateway is IOS c3845-ipvoicek9-mz.124-24.T3.Can't really find a reason on this not functioning.I do see the Label of 7777777777 + corelation id reaching my gateways when the nic is got down and new call is placed.However the VXML Session just does not seem to get invoked after that and it only tries to GET the active server on http request.
A tac case is open for this but it is taking a bit long.Can anybody suggest if any idea?
Thanks
Ganeshhari.kanan wrote:Looking into your architecture which has branched locations with co located Ingress and VXML gateways it would have been a better idea to have used Sip.Sig digits where in you can have the VXML diaglouges played local to the site as where the call had originally originated.Using the Send to call originator function would also be a better idea, but all these holds good only until you have the VXML being played out.
There is no need for SIP.sigdigits in a branch office design. Send To Originator deals with this perfectly. It ensures that the VRU leg runs on the ingress gateway. I don't know what you mean by "all these holds good until you have the VXML being played out".
Once the call needs to be transffered to an agent you might have to make use of DNS SRV records to load balance between the Different CUCM which does the call processing.The reason being i dont think using two or more static route for different call processing CUCM would really work coz CVP sip agent doesnt have the capability to send a SIP re- invite to make use of the second Static route in case the first one has failed.The local DNS-SRV really solves the issues related to the CUCM.
I want to be sure that you know this for a fact. Have you indeed confirmed this?
You say that the CVP SIP Back-To-Back User Agent does not have the capability to retry an INVITE if the first one fails. If this is the case, using SRV will not work either. It does not matter if there are two static routes, one to each Sub - or there is a single route on the cluster name being resolved by entries in a DNS SRV or local SRV - if the B2BUA cannot retry on failed INVITE, nothing will work.
I personally think a production SIP CVP without a Proxy is not a viable design.
you cannot use the send to the call originator function in this scenario because the the call is ideally originated fromthe CUCM and the the 77777! label used for queuing purpose would be send back from the CVP to the CUCM, which CUCM does not know wat it needs to be done with it.
You don't know that at all.
The OP has not told us what the VRU label on the CUCM routing client is. Normally it is not the same as the label on the CVP RC. Whatever this label is, it's not sent by CVP - it's returned to the CUCM through the PG.
CUCM MUST know what to do with it - typically it's a Route Pattern that finds a CVP. Then CVP needs to find a gateway - and you are correct that it cannot use "Send To Originator" - so there must be a static route to find a gateway using 7777777777.
So - you simply need to configure both items. You add the 777777777> to the Send to Originator and you also add a pair to the Static Route section for the gateways in Warm Transfer. CVP will optimize.
So in case of the Warm transfers i again reiterate the fact that SIP.sig didgits should have been used to maintian Queue or transfer back to IVR local to the site as the where the called had originated.
OK, this part is true - although the design is complex. In a branch-office design, with a number of branches, SIP.sigdigits is the only way to ensure that the gateway found by CVP to queue the call in a warm transfer (or any CUCM-originated call) ia at the branch. The OP has not told us whether there will be multiple branches - he does not have them at the moment.
Adding SIP.sigdigits adds a layer of complexity that takes a while to work through. If you have the bandwidth between sites you can simplify a multi-branch design by choosing one gateway (or one pair of gateways) to queue the call for CUCM-generated calls.
Using a static route for the Warm transfers and maintaining it to only one gateway your redudancy may not achieved. Again i doubt whether the re-invires are sent and the other static routes if made use of.if i was in your place and in an architecture with branched loactions and no Sip proxy server i would have made use of SIP.sig digits and local DNS SRV records. The local DNS SRV functionality does the work of the proxy servers in deployments where no proxies are used. Based on the weights and the priorities defined on the XML file it load balances and the does the failover as expected to be done by the proxy server.i would rather suggest you to re visit the design of this and make use of SIP.sig digits in combination with local DNS SRV records.
You would not have a static route to one gateway - you would put both there. Once again, you say you "doubt whether the re-invites are sent and other static routes if (sic) made use of" but you provide no proof. Cisco certainly don't say this limitation exists.
As I said before, if the B2BUA cannot retry, it makes no difference if you use a pair of static routes, or a single static route with a cluster name being resolved by SRV (either DNS or local file) , you are screwed. Adding SIP.sigdigits does not solve the problem if the B2BUA cannot retry.
I always like to use the simplest solution. I don't know enough about the future plans or the inter-branch bandwidth to clearly say that SIP.sigdigits is useful.
Regards,
Geoff -
Hello,
Here is my problem, Im using an hybrid application TCL/VXML, with some events I need to call VXML application to send messages to a HTTP server, the problem is that I need to send a message when the call is disconnected, the application doesnt have time to execute the VXML application, Is there a way to stop disconnecting the session after the application is finished ???
This is the debug:
Dec 30 12:02:07.236: //36547//TCL2:/tcl_legObjCmd: leg vxmldialog leg_incoming -u flash://datos_3.vxml -p mensaje3
Dec 30 12:02:07.236: //36547//TCL2:/tcl_vxmlDialogObjCmd: vxmldialog leg_incoming -u flash://datos_3.vxml -p mensaje3
Dec 30 12:02:07.236: //36547//TCL2:/vtd_lg_incoming: argc 6
Dec 30 12:02:07.236: //36547//TCL2:/vtd_lg_incoming: Legs [36547 ]
Dec 30 12:02:07.240: //36547//TCL2:/tcl_parseCallID_vartagObj: VARTAG Translation Leg Count=1
Dec 30 12:02:07.240: //-1//TCL2:/createAVArrayFromTclArray: DuLlama = 2
Dec 30 12:02:07.240: //-1//TCL2:/createAVArrayFromTclArray: DuEsta = 0
Dec 30 12:02:07.240: //-1//TCL2:/createAVArrayFromTclArray: IdLla = 0
Dec 30 12:02:07.240: //-1//TCL2:/createAVArrayFromTclArray: IdTarea = 365471202
Dec 30 12:02:07.240: //-1//TCL2:/createAVArrayFromTclArray: Mensaje = 3
Dec 30 12:02:07.240: //36547//TCL2:/TclInterpDriver: Tcl_Eval Failed in action=act_Cleanup code=1
code=ERROR
Dec 30 12:02:07.240: IVR TCL script failure
Result:
Command Error: vxmldialog incoming leg 36547 has command active
Dec 30 12:02:07.240: IVR TCL script failure errorInfo:
Command Error: vxmldialog incoming leg 36547 has command active
while executing
"leg vxmldialog leg_incoming -u flash://datos_3.vxml -p mensaje3"
(procedure "act_Cleanup" line 20)
invoked from within
"act_Cleanup"
Thx in advance for your helpIts me again,
Now I know that the problem is when I receive "ev_disconnect" the incoming leg just dissapair, so cant execute commands using that leg, is there a way to create a "virtual leg" to use for this ??? I only need VXML to send messages to an http server, no need to play audio or dtmf.
Thx again
Note:
I tried sendmsg but have the same problem, cant use vxml applications without a leg, and dont know how to create ine. -
VXML Server Service Terminates unexpectedly
I'm having an issue with a CVP 7.02 install where the VXML server service keeps terminating on its own. The Event Viewer on the server simply states the VXML Server service has terminated unexpectedly and this has happened nn times. I have looked at all the logs I know of (..\Tomcat\logs, \Cisco\CVP\logs, \Cisco\CVP\VXMLServer\logs, and the app log paths themselves) but there is no indication of what is going on to cause the service to crash. The intrestiong thing is somtimes it crashs even when no calls are going through the system so I doubt that it is load related.
I do have a TAC case open on this, but i am just curious to see if anyone else has run into this before.I have a similar solution for the Java Options.
This problem has come up for us recently on a different set of servers.
We are migrating a customer's CVP from CVP4 to CVP7 using tech refresh - so new servers - and the VXML Server (as a service) always crashes after 46 mins on both boxes. We have other CVP7s installed with no issues on similar hardware.
When it runs from a command window as I described above, stays up forever.
We have ES22 installed (that updates the JRE and fixes a stability problem with the service - similar to the JRE post I made above).
In the course of TAC trying to figure out the problem, they asked me to change the JRE options in the registry, so that if when the probelm reoccurred we would get a heapdump file in the HeapDumpPath location.
HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Procrun 2.0\VXMLServer\Parameters\Java\Options
-XX:+HeapDumpOnOutOfMemoryError
-XX:HeapDumpPath=C:\Cisco\CVP\VXMLServer\logs
Once this was done, it simply would not crash. If I take this out, it will only last 46 mins.
It writes the hs_err_pidXXXX.log files in WINDOWS\system32 and they say
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x002d002d, pid=8052, tid=7436
Current thread (0x4a2cf560): JavaThread "Cisco Unified CVP VXML Server: Administration Connector" daemon
They always say the current thread is in the Admin Connector daemon, which agrees with the fact that it runs fine from the cmd line, but not as a service. The DE has no clue as to what's wrong and says something may have been corrupted during the install. I have a hard time believing this, as the problem is exactly the same on both machines.
Isn't it amazing that the change to the Java Options makes it stay up.
Regards,
Geoff -
I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
LeftyThis was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
boolean active = true;
public void run(){
ss.setSoTimeout(90);
while (active){
try{
serverSocket = ss.accept();
catch (SocketTimeoutException ste){
// do nothing
// interrupt thread
public void deactivate(){
active = false;
// you gotta sleep for a time longer than the
// accept() timeout to make sure that timeout is finished.
try{
sleep(91);
}catch (InterruptedException ie){
interrupt();
} -
A problem with Threads and MMapi
I am tring to execute a class based on Game canvas.
The problem begin when I try to Play both a MIDI tone and to run an infinit Thread loop.
The MIDI tone "Stammers".
How to over come the problem?
Thanks in advance
Kobi
See Code example below:
import java.io.IOException;
import java.io.InputStream;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
import javax.microedition.lcdui.game.GameCanvas;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
public class MainScreenCanvas extends GameCanvas implements Runnable {
private MainMIDlet parent;
private boolean mTrucking = false;
Image imgBackgound = null;
int imgBackgoundX = 0, imgBackgoundY = 0;
Player player;
public MainScreenCanvas(MainMIDlet parent)
super(true);
this.parent = parent;
try
imgBackgound = Image.createImage("/images/area03_bkg0.png");
imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
imgBackgoundY = this.getHeight() - imgBackgound.getHeight();
catch(Exception e)
System.out.println(e.getMessage());
* starts thread
public void start()
mTrucking = true;
Thread t = new Thread(this);
t.start();
* stops thread
public void stop()
mTrucking = false;
public void play()
try
InputStream is = getClass().getResourceAsStream("/sounds/scale.mid");
player = Manager.createPlayer(is, "audio/midi");
player.setLoopCount(-1);
player.prefetch();
player.start();
catch(Exception e)
System.out.println(e.getMessage());
public void run()
Graphics g = getGraphics();
play();
while (true)
tick();
input();
render(g);
* responsible for object movements
private void tick()
* response to key input
private void input()
int keyStates = getKeyStates();
if ((keyStates & LEFT_PRESSED) != 0)
imgBackgoundX++;
if (imgBackgoundX > 0)
imgBackgoundX = 0;
if ((keyStates & RIGHT_PRESSED) != 0)
imgBackgoundX--;
if (imgBackgoundX < this.getWidth() - imgBackgound.getWidth())
imgBackgoundX = this.getWidth() - imgBackgound.getWidth();
* Responsible for the drawing
* @param g
private void render(Graphics g)
g.drawImage(imgBackgound, imgBackgoundX, imgBackgoundY, Graphics.TOP | Graphics.LEFT);
this.flushGraphics();
}You can also try to provide a greater Priority to your player thread so that it gains the CPU time when ever it needs it and don't harm the playback.
However a loop in a Thread and that to an infinite loop is one kind of very bad programming, 'cuz the loop eats up most of your CPU time which in turn adds up more delays of the execution of other tasks (just as in your case it is the playback). By witting codes bit efficiently and planning out the architectural execution flow of the app before start writing the code helps solve these kind of issues.
You can go through [this simple tutorial|http://oreilly.com/catalog/expjava/excerpt/index.html] about Basics of Java and Threads to know more about threads.
Regds,
SD
N.B. And yes there are more articles and tutorials available but much of them targets the Java SE / EE, but if you want to read them here is [another great one straight from SUN|http://java.sun.com/docs/books/tutorial/essential/concurrency/index.html] .
Edited by: find_suvro@SDN on 7 Nov, 2008 12:00 PM -
Hi all,
I would like to ask you for a help. I need to write a small program at my university. I started to write a midlet which function would be to countdown time for sports activities. I woul like to start a new thread - the one that counts down - and at the same time make the main thread sleep. After the "countdown" thread finishes, the main thread wakes up and waits for user input. The problem is that when the "countdown" thread finishes his work, I've got Uncaught exception java/lang/NullPointerException. error and the midlet halts.
Below you can find the code
import java.lang.*;
import java.util.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class intervals extends MIDlet implements CommandListener
public Display ekran;
private SweepCanvas sweeper;
private Form rundy;
private TextField round0, round1, round2, round3, round4, round5, round6, round7, round8;
private long czas,x;
private Command exitCommand;
private Command addRound;
private Command delRound;
private Command start;
private TextField repeat;
private Form odliczanie;
private Alert ostrz;
Licznik thread;
String test;
StringItem test1;
int parz,i,j,k;
static int l;
int ilrund;
int ilpowt;
Item sec;
long sec1;
public intervals()
rundy = new Form("Interwały sportowe");
exitCommand = new Command("Wyjście", Command.EXIT, 2);
addRound = new Command("Dodaj","Dodaj rundę", Command.ITEM,1);
delRound = new Command("Usuń","Usuń ostatnią rundę", Command.ITEM,1);
start = new Command("Start", Command.ITEM,1);
odliczanie = new Form("Odliczanie");
TextField dodaj(TextField kolej)
kolej=new TextField("Podaj czas (s) rundy "+parz,null, 4, TextField.NUMERIC);//stworzenie nowej instancji do wybierania czasu trwania rundy
if(rundy.size()==0)
rundy.insert(rundy.size(),kolej);
else
rundy.insert(rundy.size()-1, kolej);
return kolej;
void odliczanie(TextField round)
monitor m=new monitor();
k=Integer.parseInt(round.getString());
ekran.setCurrent(odliczanie);
thread=new Licznik(k,odliczanie);
thread.start();
ekran.setCurrent(rundy);
public void startApp()// throws MIDletStateChangeException
rundy.deleteAll();
repeat = new TextField("Podaj ilość powtórzeń",null,1,TextField.NUMERIC);
rundy.addCommand(addRound);
rundy.addCommand(exitCommand);
rundy.setCommandListener(this);
Canvas obrazek = new MyCanvas();
ekran = Display.getDisplay(this);
ekran.setCurrent(obrazek);
czas=System.currentTimeMillis();
while (System.currentTimeMillis()<czas+1000)
continue;
ekran.setCurrent(rundy);
public void pauseApp()
public void destroyApp(boolean unconditional)
notifyDestroyed();
public void commandAction(Command c, Displayable s)
if (c == exitCommand)
destroyApp(false);
notifyDestroyed();
else if(c==addRound)
if(rundy.size()==0)//Sprawdzenie ilości elementów w celu poprawnego wyświetlania liczby rund w formie
parz=1;
else
parz=rundy.size();
switch(parz)
case 1:
round0=dodaj(round0);break;
case 2:
round1=dodaj(round1);break;
case 3:
round2= dodaj(round2);break;
case 4:
round3=dodaj(round3);break;
case 5:
round4=dodaj(round4);break;
default:
ostrz=new Alert("Uwaga","Maksymalna liczba rund wynosi 9", null, AlertType.INFO);
ostrz.setTimeout(3000);
ekran.setCurrent(ostrz);
if(rundy.size()==1)
rundy.append(repeat);
rundy.addCommand(start);
rundy.addCommand(delRound);
else if(c==delRound)
if(rundy.size()!=0)
rundy.delete(rundy.size()-2);
if (rundy.size()==1)
rundy.deleteAll();
if(rundy.size()==0)
rundy.removeCommand(delRound);
rundy.removeCommand(start);
else if(c==start)
ilrund=rundy.size()-1;
if(this.repeat.size()>0)
ilpowt=Integer.parseInt(this.repeat.getString());
ekran = Display.getDisplay(this);
for (i=1; i<=ilpowt;i++)
odliczanie= new Form("Odliczanie");
for (j=0;j<ilrund;j++)
switch(j)
case 0:
odliczanie(round0);
break;
case 1:
odliczanie(round1);
break;
case 2:
odliczanie(round2);
break;
case 3:
odliczanie(round3);
break;
case 4:
odliczanie(round4);
break;
case 5:
odliczanie(round5);
break;
case 6:
odliczanie(round6);
break;
case 7:
odliczanie(round7);
break;
case 8:
odliczanie(round8);
break;
class Licznik extends Thread
int czas1,k;
Form forma;
monitor m;
public Licznik(int k,Form formap)
czas1=k;
forma=formap;
public synchronized void run()
while(czas1>0)
forma.deleteAll();
forma.append("Czas pozostały (s): "+czas1);
try{Thread.sleep(1000);} catch(InterruptedException e){e.printStackTrace();}
czas1--;
if(czas1<=0)
m.put();
}and monitor class
public class monitor
boolean busy=false;
synchronized void get()
if(!busy)
try
wait();
}catch(InterruptedException e){e.printStackTrace();}
notify();
synchronized void put()
if(busy)
try
wait();
}catch(InterruptedException e){e.printStackTrace();}
busy=true;
notify();
}Can anybody help me with this?Groovemaker,
Your Licznik class has a member m of type monitor, which has not been instantiated (in other words is null) hence, when calling m.put() you get NullPointerException. Please also mind, that using Thread.sleep(1000) is not an accurate way of measuring time.
If I may, please use recommended for Java class naming conventions - some of your names use lower case, while other don't which is confusing to the reader.
Daniel -
Problem with threads within applet
Hello,
I got an applet, inside this applet I have a singleton, inside this singleton I have a thread.
this thread is running in endless loop.
he is doing something and go to sleep on and on.
the problem is,
when I refresh my IE6 browser I see more than 1 thread.
for debug matter, I did the following things:
inside the thread, sysout every time he goes to sleep.
sysout in the singleton constructor.
sysout in the singleton destructor.
the output goes like this:
when refresh the page, the singleton constructor loading but not every refresh, sometimes I see the constructor output and sometimes I dont.
The thread inside the singleton is giving me the same output, sometime I see more than one thread at a time and sometimes I dont.
The destructor never works (no output there).
I don't understand what is going on.
someone can please shed some light?
thanks.
btw. I am working with JRE 1.1
this is very old and big applet and I can't convert it to something new.Ooops. sorry!
I did.
public void start() {
public void stop() {
public void destroy() {
try {
resetAll();
Configuration.closeConnection();
QuoteItem.closeConnection();
} finally {
try {
super.finalize();
} catch (Throwable e) {
e.printStackTrace();
}
Maybe you are looking for
-
How to type selected pages in the Print dialog box
Hello, I am using ID5 with Windows 7. I need to provide sample pages on my web site of a book I wrote. I pressed Ctrl-E, named the file, chose Adobe .pdf (Print), and then typed in all the pages: Sec.1:1, ii-vii, Sec2:1, Sec2:20-23, Sec2:51, Sec2:72,
-
Font problems in Office 2008 and iLife 2009
I've been using a Mac for years, and have never had so many problems before. I'm am currently running Mac OS X 10.6.2 on a 2006 2GHz Intel Core 2 Duo Macbook. I recently did the 6.2 update last night, as I was hoping it would solve problems that I ha
-
ICal reset times after 10.6.5 update
I hope I'm not the only one this happened to; I just updated to 10.6.5 and all of my iCal events reset to a 7am start time. When I try to edit the event, the only thing that shows up in the "from" and "to" areas of the event are the date, and the min
-
A problem about starting OID service
I stoped all the services. But when I restart the services,I can't start the OID service. 1.start the IFS TNS 2.start the IFS DB(iasdb) 3.start the IFS OID(based on iasdb) Then I started a command session,and typed the following command: 1.oidmon sta
-
Can't convert RAW files to .psd...help!
When I open a RAW file using Camera RAW in Photoshop Elements 9 on my Mac and try to save it as a .psd or .jpg or even a .tif, the extension of the file stays at .CR2 and does not want to convert my file. I had no issues yesterday...just today. I r