W500 Docking Station and Dual Monitors

I had to re-image my laptop (W500) and install same Windows7 64 bit. There is no difference in the configuration with previous Windows7 64 bit installation. In both cases I used docking station and two attached monitors - one with VGA and second with DVI cables. Everything worked just fine before re-imaging. After completing OS installation it cannot recognize DVI port, and I'm stuck with one monitor.
Wondering if anybody had the same issue?

Ok, here is what I did - took laptop out of the docking station, reboot, changed option in the BIOS. Screen is going black that I cannot do anything with my computer. So let it boot into windows and connected remotely from another computer. Scanned for hardware changes and still nothing. Mobile Intel is shown in the Display Adapters. At this point I'm in the corner...
When I reboot laptop display started to work, so I open BIOS and Switchable option was selected again. I'm wondering if "OS Detection for Switchable Grphics" option that is "Enabled" now has something to do with it?
Update: I disable OS Detection and still nothing...

Similar Messages

T450s docking station and 3 monitors simultaneously with one 4K@60hz ?

Hi,
I left my job for a new one and I am looking for a replacement of my very good old X220 which was paid by my previous company.
Currently, my X220 drives, under Linux, 4 FHD monitors through eGPU (DIY with a 5870 Eyefinity 6) with 16GB RAM.
I intend to buy the new T450s, but I can't find any reviews or posts about the multi-monitor support of this notebook and nothing more through a docking station.
So, can anybody tell me if the T450s can drive this kind of configuration simultaneously:
- 1x Philips bdm4065uc (4K@60hz) through DP 1.2
- 2x DELL U241M (1920x1200) through the others ports (DP or DVI or VGA)
Which docking station can achive this ? I think I need to go with an ultra model with 170W, but not sure if even this highest model can achieve this.
Many thanks for your answers,
Regards,
Lenovo X220 4287-CTO / Intel Core i7 2640M @ 2.8 / Corsair Vengeance 16 Go@1866 MHz CL10 / Samsung SSD 840 PRO 512 Go / Bios 1.38 / Linux Xubuntu 14.04LTS / eGPU ATI Radeon 5870 Eyefinity 6 / 2x DELL U2142M / 2x DELL U2212HM

The initial question was not if you can run 3 external screens but if you can run 2 external + laptop screen at the same time
With Matrox extenders you can run up to 6 depending on you screens (max resolution is limited). Btw it's DualHead not DoubleHead
Rgds,
Ahti

Laptop - Docking and Dual Monitors

Hi there,
I have a personal HP Dv4t Laptop, work has purchased for me a an Elitebook with docking station and dual monitors - I am trying to figure out when I am using my personal non work PC how to now connect this Laptop to least one of the monitors.
I have a single dongle connected to the docking staition for one monitor, but it's too short and only a single one and not to able attached to my personal laptop.
I know it's probably pretty easy if you are use to configuriung, but I am not. Any help is appreciated.
Thanks,
Eileencat

Hi ecat,
I wanted the product number so that I could check the specs on your notebook to see what ports you have on your notebook. However, your model is a CTO which means Custom to Order so I can't pull up the specs.
This HP document Using Two or More Monitors with One Computer will show you the types of video connections and how to extend the desktop. This will be a guideline to show you how to setup the external monitor.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I got a new home dock station and it does not play my music while its in the dock. my neighbor has the same phone and hers works fine in my dock station.wondering why?

I got a new dock station and it will not play any of my music while my iphone 3gs is docked. my neighbor has the same exact phone and hers plays fine..what could be the problem?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.

I was listening to iPod nano in docking station and pressed center button and music stopped playing and a high pitched sound is emitting from iPod.

Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy

Problem with USB port on X6 docking station and X60 laptop

Hello all,
One of my users is having a problem that when she undocks the X60 laptop from the X6 docking station and then re-docks it later, the devices connected to the USB ports on the X6 docking station are no longer recognized. Even after repeated re-boots I can't get the USB ports to work. The USB ports on the laptop still work, but not on the docking station. Anyone know what I need to do to fix this?
T

BIOS 2.19 is for X61 series not X60(s).
Here're my solutions.
Solution 1. Unplug all USB devices from docking station. Reset BIOS to defaults, save settings, reboot, plug all devices back. All of them should work now.
Solution 2. Power off your system. Un-dock your laptop. Unplug all USB devices from docking. Re-dock your laptop back again. Power on your system. Plug all devices back again after system booting. All of devices should work now.
I tested both on my X60s working even if it seems rediculous.
Lenovo promised to send me a new docking; however, I don't think it will help unless new BIOS is released to solve this issue.
Note: the kep point is you have to wait to plug all devices back to docking after system boots.
Good luck.

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!

Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

Iphone turned off when i plugged it in to a docking station and won't turn back on

i was going to listen to some music on my vivo docking station and my boyfriend put his iphone on the docking station and his phone just turned off and wouldnt turn back on i put mine in and the same happend.. anyway my boyfriend called apple and spoke to someone who told him to hold the home and lock button to reset the phone this didnt work he then told us to hold the home button and plug it into a computer. My boyfriends worked but had completely drained the battery so he charged it and its fine, we tried all the same things for my phone and nothing will work anyone got any ideas? Iphone 4 16gb by the way.
Thanks

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
If this does not work, get it serviced:
Apple - Support - Service Answer Center

X61 dock station and Linux

I have a Thinkpad X61. I bought it without a dock station and I never needed one. Now I need and I want to buy one. It will probably be second hand but that doesn't matter
I want to know if someone used a docking station with Linux distro (Ubuntu or Fedora pref.) I have concerns about network issues.
Thanks.

I can't specifically give you any guarantees about X61, but I've used several Thinkpads with docking stations under Linux, and so have my colleagues at work, and I've never heard about any problems.
I love docking stations and I think they are well worth it if you can find one cheap. eBay in the US seems to be full of them, though shipping to Bulgaria might be a different matter...
As to your hard drive question, the following link should tell you all you need to know:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62432

I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

I think that is happening is that the microphone is on during this recording. If you play the music through the iPhone speakers, it will record this sound, albeit at very poor quality. If you say anything (or laugh uproariously as I did while watching the app in action, then that, too, get recorded.
I am still looking for the solution we all want, which is to save the audio in reasonable quality.
Anyone out there with some ideas?
Cheers,
Rob

Think Pad Tablet 2 Docking Station and I/O Board....

Hi;
Seems like people have given up on the tablet 2, am looking to buy a docking station and can't seem to find one here in the UK. Used to be loads bouncing around on ebay but they've vanished... notice lenovo does not seem to make them anymore?
Basically looking to fix the I/O board wanting to use the dock to charge it.... any tips and links to UK sites selling the I/O board would be helpful.
Thanks
GL

it is not easy, but you have to work at it.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

T510 with docking station and SD-8821 external keyboard - stupid Fx key settings

So I have a 510. Its running XP Pro. It is attached to a docking station and I have an SD-8821 external "slim" keyboard pulgged in.
My problem is the row of function keys along the top. I need to use F1 through F12 often in my work, the keys are set to control stuff like volume, sleep, lock, etc. In order to get the Fx function, I have to press the Fn key first.
I have scoured the internet and there seems to be a an app to change this but my notebook does not have it. I cannot find it on the Lenovo web site either. How do I get it? This is driving me nuts.
Solved!
Go to Solution.

Found this (nice link):
http://webcache.googleusercontent.com/search?q=cache:ep7RysRfC6cJ:www-307.ibm.com/pc/support/site.ws...
Having it installed, the Lenovo Slim USB Keyboard app appeared in my Start menu.

TouchSmart and dual monitors - lag time

I have the HP TouchSmart 320 PC and have set up the connection with a second and third monitor. I had to purchase a seperate piece to connect them. When I first connected them, they were working perfectly. However, I had to take my PC to get it cleaned due to some viruses. Now there is a huge lag time between my main PC and dual monitors. For example: if I play a video, it will not show up on the dual monitor but will play on my main PC. How can I fix this to where they sync up better?

Hello,
What is the exact model of the 320 PC you have?
What are the other monitors brand and models and what piece have you bought to connect those monitors to your unit?
Can you explain the setup or even provide pictures of the setup?
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Dual monitor setup with Docking station and W500 on windows 8

Hi there
I have a w500 with ATI Radeon 3650
Trying hard to have it set up with windows 8 and two monitors with my docking station. It worked with XP, Vista, W7...but no go now.
Any solutions out there? I don't care about catalyst control center, or which drivers I have to use, just give me back my two monitors connected to a docking station

I have the same W500 setup and have had no luck finding Windows 8 drivers on Lenovo's site or AMD's. I have a support ticket in to Lenovo to see what they come up with. I have two flat panel monitors that I need to work. According to MS, Catalyst Control Center has compatibility issues with Win8. It was easy to set up both monitors under Win7 with CCC. I have not been able to set them up using Windows display setting in Control Panel. Does anyone out there know of an app that I can use to replace CCC and run two monitors?
kb5

Issue with dock and dual monitors

After unplugging my MacBook (Late 2008) from my Samsung External Monitor, my dock disappears and requires a "killall Dock" in Terminal to reappear. Does anyone know how I can fix this? Thanks.
PS- Running 10.5.8 and it happens all the time.
Thanks again.

could have something to do with how you are sharing your desktop b/t the laptop and the monitor... try resetting your monitor to "clone" or resetting your home screen to the laptop BEFORE unplugging the external monitor--

W500 Docking Station and Dual Monitors

Similar Messages

Maybe you are looking for