[W520] New UltraNav driver update failure...

The UltraNav driver 15.3.39.1 in question for my W520: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS019164
Installing the update results in these two error messages:
It finally finishes with:
I've tried uninstalling everything, restarts in between, and everything else. I'm having to roll back to the previous version.
W520: i7-2960XM, 32GB RAM, Quadro 2000M, Intel 310 SSD, Hitachi 320GB RAID0, 15.6" FHD, Intel 6300 Ultimate-N
OS: Windows 7 Professional 64-bit with the latest updates and drivers

I tried installing that driver and it worked for me. Anyone else having this problem?

Similar Messages

Imac g5 ppc new hard drive update tiger10.4.11problem

I replaced the hard drive in my Imac 20" g5 ppc 2.1gh
installed tiger version 10.4.6 from my black retail tiger install disk.
i want to update to tiger 10.4.11 but when i try i get a messsage
update cannot be installed the digital signature for this package is incorrect. the package may have been corrupted or tampered with since being signed by apple

Hi there, I most often find this happens on a Wifi/Airport connection & is a bad download.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Is this the one you're trying?
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

Catalyst Control Center crashes with new video driver update

Hi Folks,
I just updated to the newest rev of the ATI driver (April 28, 2009). Now, catalyst control center crashes at startup, opening a dialog box that says, "catalyst control center monitoring program has encountered a problem and needs to close".
Has anyone else run into this? Any ideas on how to fix it?
Thanks,
Allie
T400 2764-CTO, XP

Please post the details of your problem with the 8.563 driver in this thread.
Use the format from this post.
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

MOVED: Installed new NVIDIA driver update, now brightness controls won't work.

This topic has been moved to GAMING Notebooks.
https://forum-en.msi.com/index.php?topic=256152.0

Hello, all, my ipod touch is now working. Here's what happened...I called the tech support line and started going through the automated stuff. It started me with the reset which I had done numerous time. It then mentioned trying a different USB port. I figured it was a waste of time, but then I decided what the heck, so I tried the other usb port on the front of my pc. When I did this, it recognized the ipod in ituned and gave me a mssg that it needed to be restored. I clicked on the restore link, and minutes later it gave me an error message on the restore, and the ipod showed the apple on the sreen instead of the itunes logo with the usb cord. I then tried it back in the original usb port, and received the same windows prompt to try to install drivers that I had been getting all along. I put it back in the second USB port, and got the restore message again with it being recognized in itunes. This time it successfully completed the restore. I know it sounds simple, but if you have not tried a different USB port, be sure you do. Maybe the download jacked up my USB port? Anyway, I'm working again with the 2.2.1 download. Good luck to all!!

K7N2 Delta Driver Update Failure of doom

I recently downloaded the nvidia nforce2 4&1 drivers for my K7N2 Delta motherboard and about 30% through the installation of the computer restarted. It began reloading yet when it got to the point when it should begin loading windows it just goes to a black screen and wont go any further. It doesnt show the Windows XP logo. Also everything seems to be plugged in correctly, all the hardware seems fully functional, and everything in the bios seems correct.
Im using:
Windows XP Home Sp1
512 MB Ram
Gforce 4400 TI Video card
1800 Athelon Xp
K7N2 Delta Motherboard
Thanks for any help you can give

Reboot PC and Boot from your XP instalation CD.
Go into Recovery Console and login as administrator. Replace these files
Copy %systemroot%\system32\config\default.sav %systemroot%\system32\config\default
Copy %systemroot%\system32\config\software.sav %systemroot%\system32\config\software
Copy %systemroot%\system32\config\system.sav %systemroot%\system32\config\system
Reboot PC and boot normal

GP60: After installing new NVIDIA driver, no brightness controls work now.

Hey guys! I have a small problem I'm hoping someone might know how to fix. I just installed a new NVIDIA driver update (I'm now on build ) and now my brightness controls won't work. My computer is stuck in a very bright setting, and I don't know how to fix it. I've restarted the computer, and I've put it into hibernation and restarted it.
Before i did the hibernation, my computer was stuck in GPU mode (it would only use the GPU, even if all I was doing was using PowerPoint). The hibernation/restart fixed that, but not my brightness. Not sure if the problems are related, but throwing that in there too just in case.
I also don't know if this is related as well, but my NVIDIA control panel will not work either; it says that I don't have a display that uses it or something like that. Again, probably TMI, but better safe than sorry!
I'd appreciate any advice that I could get! Thanks!
Specs:
MSI GP60
intel i5-4200
NVIDIA GeForce GT 740M/2 GB DDR3 (my problem child today).
Update: Now my computer is back in GPU-only mode and nothing is helping it swap out of it. I'm thinking the two are related now...

Have you installed the Intel graphic driver?
The hot key for brightness is controlled by EC & Intel graphic driver.
Please refer to the product webpage to download the latest Intel graphic driver:
http://www.msi.com/search/gp60/product/1
Pick your model and select Download and your OS type to find the drivers.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

cwhargrave,
have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

Please help!!! Cannot run Windows Update in Win 7 Pro after changing new hard-drive. (X201s)

Hi everyone,
I have been using my thinkpad x201s for more than one year by now. And recently I change a new and larger hard drive for my laptop. When I tried the thinkpad rescue and recovery disc on the new hard drive, everything works fine except that I cannot run Windows Updates after the installation was finished. The recovery DVDs were burned directly from the original image stored in the computer when the first I received my laptop last year.
Every time when I try to run the Windows Update, it shows the following: "Windows Update cannot currently check for updates, because the service is not running, you may need to restart your computer."
I restarted my computer later but nothing changed. Can't run Windows Updates and can't even install IE9.
I then moved back to my old hard drive and everything is normal, no problem with Windows Updates. I also tried to create a back-up image by running win 7 Backups and Restore. Later when I changed back to the new drive and followed the instructions to restore my system from the image I created earlier in a USB drive, it worked except that still the system can't run Windows Updates program.
I'm now getting very confused and upset, is it something to do with the software copyright? It's been a week now and I tried to Google the similar problem but no solutions work here. All I want to do is moving my current system to the new hard drive so that I can continue to use my laptop but it just failed updating every time.
Could anyone kindly tell me what to do when changing hard drive in order to avoid the problem I'm dealing with? Sorry I'm not a pro type user and just want my laptop to work appropriately.
My warranty has already expired so I guess the Lenovo Technical Hotline wouldn't answer my questions anymore. Please help!! Much appreciated.
Thanks so much in advance!!

I'm not sure this is the issue, but from your description, it seems as though all you have to do is activate the windows update service. If I were you, I'd search for "Services" in the start menu, open it and look for "Windows Update". Check in its properties that it is set to "Automatic (Delayed)", if it isn't, set it, and start the service, you should then be able to check for updates, be careful though that none of your other programs aren't stopping the service, usually these programs are there to "optimize your performance" or "boost your system",...
Hope this helps.

Hard drive failure! New hard drive/Time machine backup/iPhone questions

Hello,
I have a 2011 MacBook Pro who's hard drive failed (rather acutely too, I do use disk utility to check it's health regularly) and I bought a replacement to install (SSD!). I have a bunch of questions but have only found partial answers in searches. Maybe it's best to list them:
1. I'd like to do a fresh install of the OS X using OS X Recovery because I'm concerned my Time Machine backup is partly corrupted. I hadn't updated to Mavericks, will I be able to install Mountain Lion? If not: will this be a problem with my backup files?
2. Say the OS X Recovery works, how do I use Time Machine to restore things like my iTunes library/iMessages/email/iPhoto library etc? In other words: just the data I can't get any other way (I hope it's not too corrupted). And/or should I use my iCloud backup on a few of these (iMessages/contacts)?
3. Do I need to set up the new OS X install with the same account names/home disk name etc. for the restored backup files to function?
4. Is this going to f'up iCloud or vice versa?
5. Finally, how do I sync my iPhone to the "new" computer without erasing the iPhone (which had an iOS update since my last backup to Time Machine). Or do I have to restore the iPhone too.
6. How come Apple doesn't have a mobile theme for their website yet?
Any help would be much appreciated,
Matt

Do you still have the original System Reinstall DVD set that came with your Mac?
If you created that Lion external drive you have from YOUR Mac, when Lion was installed on it, and it also contains a Recovery HD partition you can use that to boot to the Recovery HD and reinstall Lion on the new drive. And or Clone that external to the new internal drive you installed.
Right since your Mac came with Snow Leopard you can't use the Online Internet Recovery system to reinstall Lion, as your system didn't originally come with Lion, but you should still be able to boot to it to do diagnosic things like using Disk Utility, going to the Net to get help and even Restoring the system from a Time Machine backup. But you will get an error if you select Reinstall Mac OS X. The firmware update is usually applied with system updates.
If you created a New Time Machine Backup when any of the Download Only version of OS X were installed on your internal drive Time Machine, the system, Copies over the files needed to boot the system from that backup drive. If it was a care over backup from when Snow Leopard was installed is might or might not be bootable. Only way to tell is to connect it and at startup hold down the Option key to get the Boot selection screen, IE The Boot Manager screen, and see if it shows up as a Boot Source. If it does thenn it contains the files needed to get to the Mac OS X Utilities, IE the Recovery HD files.
What you should do is Boot the system from either the Time Machine backup, if it is bootable, or your External that has Lion on it, The Recovery HD if that drive contains a Recovery HD, or your Original Snow Leopard reinstall DVD that came with your Mac and then try to Restore from your Time Machine backup drive.
If that fails to restore your system properly then nyou should reinstall Snow Leopard and the iLife Apps from the Original Discs then upgrade to Mt Lion which will be in the Mac App Store under your Purchases area. Then maybe you can restore your files from that Time Machine backup.
scardanelli wrote:
I've had a bunch of issues with my computer (you can look at some of my other questions on these forums) which, to my mind anyway, seemed to be finally given a diagnosis when my HD crashed. It may be paranoia but there have been enough problems that I'd rather do a clean install to be on the safe side.
I have an early 2011, shipped with Snow Leopard.
I was under the impression that Time Machine can't be used as a boot drive and the OS X Recovery is a firmware update (on my computer) or hard wired in (on later computers). I might be wrong. I was planning on using the internet recovery, the HD failed right after I got some password protected files unencrypted and onto an external drive (was that necessary?) but wasn't sure if it's a problem if it installs Mavericks.
So Setup Assistant will configure my accounts the same and I don't need to worry about that? That's a relief.
Thanks for the lengthy response.

New Hard Drive - Software Update Problem

I have a 13' MacBook Pro running OS X v.10.6.7 Snow Leopard, a little more than a year old. A few weeks ago, it had a kernel panic..long story short, ended up needed my hard drive replaced. Now I have the new hard drive, moved all of my files from my external HD back onto the laptop. When I tried to open iTunes, I get the following message: The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?. So, I ran Software Update, which tells me I have 11 items to update. I click Update, it goes through and updates for about an hour, then tells me I need to restart to complete the update. I click restart, then a screen pops up telling me that I have items that need to be updated, would I like to update and restart? So I click update and restart, it seems to go through and update the same 11 items before an error message appears telling me the update could not be completed. This has happened every time I try to run the software update. Any suggestions?

Try installing the Mac OS X 10.6.8 Update Combo.
Restart your Mac after the combo is installed.
If necessary, you can Re-create your iTunes library and playlists

Got a new hard drive now computer wont update my ipod

I had to get a new hard drive and have managed to get all of my old music back into itunes but my computer does not read my ipod and has not updated the new music that I have purchased thru itunes or music I have downloaded from a disc since installing the new hard drive. I have re-installed my ipod software from the disc with no results.... HELP!!! My Mini now has no music on it because I reformatted it when prompted to do so when reinstalling the software... I am so frustrated, please advise???
Gateway Windows XP

I have to admit that your reply seems as though it would work, but I am not sure exactly what your reply means, can you respond to me like I am an idiot and spell it out for me??? I am having a great laugh at myself right now, but if you tell me exactly what to do, I am sure I can figure it out. I did put the disc that came with my mini, I even uninstalled itunes all together and reinstalled it but that did nothing to help the cause... still getting the same response that my software is not "installed properly"

How can the number of used computers used for itunes be updated? I had to reinstall itunes on a new hard drive

How can the number of computers used for an iTunes account be updated? I had to reinstall itunes on a new hard drive it and counted as an additional computer, against my 5 total computers.

wait until you reach the limit of five authorized machines. then, once a year, you will be able to deauthorize all machines, following which you can reauthorize those computers you currently use/have access to.
click here for more information.

New hard drives coming. Update projects now or later?

I want to upgrade to FCP 10.1 (from 10.0.9) at the earliest. I travel and shoot video abroad but return to the US to do major editing. So my current hard drives are small: I have media and backups that I've been moving back and forth between drives. I use three Lacie Little Big Disks (2x1TB 7200rpm; 1x2TB 5400rpm) and a Drobo Mini (2 sets of 4x1TB drives). I've also put all my Camera Archives on a 3TB WD USB 3.0 drive.
I have new desktop drives coming right after Christmas. I am considering upgrading to 10.1 now. I will use Event Manager X to update projects and their associated events one at a time (following the guidance of Philip Hodgetts' article on FCP.co).
My question: Is it advisable to go ahead with the upgrade now and then move libraries to the new drives? (Or would it be better to wait until the new drives arrive?)

May as well do it now. You can move the libraries at will whenever you want.

[W520] New UltraNav driver update failure...

Similar Messages

Maybe you are looking for