W520 WebCam Upgrade Kit

Has anyone tried installing the WebCam upgrade kit for their w520? There are a few available (it seems from China) on eBay (I don't want to paste a link since it might be flagged as spam).
It comes with a cover for the WebCam chip, that seems like it will install at the top of the LCD screen. But I took off the panel around my LCD and it didn't look like I can just put that new cover in. It looks like I'll have to cut it out to make a hole for it.
Any thoughts/experiences? There don't seem to be any installation instructions anywhere.

If I remember correctly, they all have the same bezel. The ones without a camera have one trapezoid-shaped sticker without a camera hole and you replace the sticker by one with a camera hole.

Similar Messages

HP Wireless Printing Upgrade Kit and MacBook

Hi,
I've bought the HP Wireless Printing Upgrade Kit to connect my printer at the wireless network. That printer is HP Color Laserjet CM1312 MFP. I've set the a static IP on the router settings and for the Windows PC, that are in my wireless network at my home, everything works well.
The problem is about the connection with the MacBook (10.6.8) because there aren't some driver or solution to obtain the access to that printer from a user that isn't on a windows.
Do you have some ideas to help me?
Best,
Matteo

Hello Matteo,
Thanks for the post on the upgrade kit. If you have not already, I might recommend posting this question to the link below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Using HP wireless Upgrade Kit with HP Color Laserjet CP1215

I just recently purchased the HP Color Laserjet CP1215 and attempted to install and use the upgrade wireless kit but I can't get it to install. It will go through the process until it gets to the point where it either can not find the PC adapter or that the PC and printer adapter don't connect. I am not sure what to do. The only error message I receive is that the HPWlan.exe file has an error and will not load. Does anyone have any suggestions?

You need to post more detail. Which Windows? Describe Wifi and software more. Otherwise the number of people who could help you is narrowed to just those who have your printer and the same wifi upgrade kit.
--J
"I never let schooling interfere with my education" --Mark Twain

Solid State Drive Upgrade Kit v300a with Windows 8.1 on Envy laptop

I am trying to install the Solid State Drive Upgrade Kit V300a in my new HP Envy with Windows 8.1. This upgrade was listed as an option for this model and was bought with the machine.
The doc lists OS supported, but Windows 8 is not in the list. Is Windows 8 supported?
The included disk labled "Arconis" includes ATIHO user guide pdfs and an HP-Drive-Install-Guide-1.15.13-327pm pdf. The install guide mentions using Arconis. The Arconis user guide says to run "setup" to install Acronis but there is no setup file on the disk. I have chosen the setting to display hidden files and there is nothing on the disk but pdfs. The v300a box claims that it includes Acronis Cloning Software.
How do I install this HP upgrade on my new HP laptop?

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
YES, Windows 8 and 8.1 should be supported.
Please refer to this "HP SSD Upgrade Kit Installation Guide" for instructions on setting-up the HP SSD Upgrade Kit and cloning your factory installed hard drive. Please read the guide carefully and in its entirety. Next, assembly the SSD drive and the drive enclosure, per the instructions on page 9. Now, carefully follow the cloning instructions from page 9 to page 26.
Per the instructions, the cloning software should be on the included CD/DVD and it may be a bootable disc. However, if you are unable to locate the required software, please see www.HPSupport.pny.com to register your product and download any needed software.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

GeForce 7300 GT Upgrade Kit for Mac Pro?? G5?

Hi,
Just found this on the apple store:
http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=1643C421&nplm=M A567
"NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro"
Why is it only for mac pro? its PCI express & my g5 is one of the late 2005 models and it has PCI Express so am i wrong in thinking that this should work fine or is it something to do with the new intel architecture?
If i remember correctly i could have chosen this card or a very similar one when i configured my G5.
Thanks

That card is only for the Mac Pro, as it says.
When you ordered your G5, you had the choice of the nVidia 6600 (or 6600LE), nVidia 7800GT, or the Quadro FX 4500.
The 7800GT that you could have ordered with your G5 is close in performance to the ATi X1900XT that is an option on the Mac Pro. The 7300GT that you're looking at is an entry level card, which the 7800GT definitely is not.
The 7300GT and the X1900XT are both Mac Pro only due to the ROM on the card, which is designed to work with the EFI booting hardware that the Mac Pro uses. The G5s used Open Firmware, which requires a different ROM on the video card. So, even though both your G5 and the Mac Pro are PCI-Express based, these video cards are not compatible.
Now, most PCI-Express cards that you look at for, say, external SATA, will probably work in both the G5 and the Mac Pro. You'd still want to check the specs to be sure, however.
If you're looking for a new video card to replace your (presumably) nVidia 6600, your only real option is the ATi X1900 G5 edition. This is a different card than the X1900XT that's offered for the Mac Pro.

Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

Just came out on barefeats:
http://www.barefeats.com/nehal14.html
Shows new drivers with 285, also compares 4870.
If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

Will Wireless Printing Upgrade Kit support All-in-one Printer F4235?

I have not found this information in the forum, I hope someone will be able to help me.
I purchased a Wireless Printing Upgrade Kit and I'm not sure if it is compatible with my printer. I have an all-in-one F4235. The list on the box does not list this model but it says also works with most other HP printers and all-in-ones. I have checked the website and it lists the same printer so I don't know if the list just has not be updated.
I don't want to open the package until I know if it is compatible.

Yes, the HP Deskjet F4235 (F4200 series) All-in-one supports the Wireless Upgrade kit.
For more information, refer to the below weblink.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00783236&lc=en&dlc=en&cc=us〈=en&product=3200077

Final Cut Studio Upgrade Kit

Hi,
I bought the Production Suite last year or something, and now I would like to upgrade to Final Cut Studio for $199. Does anyone now, if apple ships the whole Studio box, or simply the install discs? Just curious.
Patrick

I just received my upgrade kit. It came with just the Install DVDS, a software license, and a small "Installing Your Software" booklet with new License codes.
No manuals. They're all in PDFs on the DVDs.
I was disappointed about no printed manuals but then again, from an environmental standpoint, they conserved resources. It's all in how you look at it. Manuals are nice but searching PDFs is quicker.
My biggest surprise & confusion is the Graphics Card compatibility issue. It said my Dual G5 with a Radeon 9600 Pro GPU was not capable of running FCP 5!
I looked in my system profile and Quartz Extreme is OFF. I tried turning it on with some hackery, but it still says "Unsupported" under the "Quartz Extreme" column in System Profiler.
According to Apple's readme, my ATI Radeon 9600 Pro is not capable of FCP 5, even though I'd swear I read it CAN do Quartz Extreme.
I am finding this a bit confusing... Do I really need to upgrade my video card or is it a matter of turning on Quartz Extreme properly?
Those who are upgrading should consider this issue...
Note, I can run the other apps, including Motion, but not FCP. I would have thought it would have installed and simply not run as fast or something, but NO, it just won't install at all.
Any ideas?
Rick

Wireless Printing Upgrade Kit and Laserjet P1006

Hello,
I am just wondering if the HP Wireless Printing Upgrade Kit is compatible with the HP Laserjet P1006 printer. It is not listed on the compatibility list but I have read several accounts of people who claim to be using them together. I have also read posts that state they are not compatible. Either way, they will not work together for me so I am trying to figure out if it is something I am doing wrong in the setup or if the two pieces of hardware are simply not compatible. If anyone has any suggestions I would greatly appreciate it.
Thanks,
Lauren
P.S. I am using a Dell XPS M1310 Notebook with Vista.

Hi,
I guess that would help:
http://www.computerhuset.dk/PDF/hpljp1006.pdf
In turn, I was wandering if one could get away without the PC dongle to avoid the PC looking like a porcupine and rely on the PC's bluetooth or Wi-Fi adapters.
Best

Wireless printing upgrade kit

COULD ANY ONE TELL ME PLEASE, I HAVE OFFICEJET ALL IN ONE PRINTER 5610 , WOULD IT BE POSSIBLE TO MAKE MY PRINTER WIRELESS BY BUYING A HP WIRELESS UPGRADE KIT
HOPE SOME ONE MIGHT KNOW
THANKS

Yes, the 5610 is compatible with the HP Wireless Printing Upgrade Kit.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Mac Pro 1.1 Non Apple 5770 VS Apple upgrade kit 5770

Hello everyone,
I currently have a Mac Pro 1.1 3.0 GHz quard core, running 10.6.8 with a x1900 ATI grphics card. I want to upgrade the graphics cabibilty in this awesome machine.
I have seen and read posts about people putting in the "Apple upgrade kit" and it working just fine, but my qestion is can you get a ATI 5770 for $80 and it work fine just with no boot screen? Need some help on this issue before i spend the cash.
So again im asking would this card work for the Mac Pro 1.1 running 10.6.8? All that looks different is it had 2 DVI ports insead of one, and it doenst have the huge support bar that Apples does. Please let me know that you guys think.
http://www.ascendtech.us/ati-radeon-hd5770-1gb-gddr5-video-card_i_vc1gbatirhd577 0.aspx?agent=froogle

About the cheapest thing that is any good that actually works is this flashed GT120 from ebay seller MacVidCards (subject to availability):
http://www.ebay.com/itm/Nvidia-GT120-for-2006-07-1st-Gen-Mac-Pro-Dual-DVI-EFI32- works-with-ML-/330781491052?pt=PCC_Video_TV_Cards&hash=item4d041cff6c
Note possible extended handling time on this item!
Or shop all items from this Mac-savvy seller:
http://www.ebay.com/sch/MacVidCards/m.html?_ipg=50&_sop=12&_rdc=1

Anybody know how to make the upgrade kit remote work with Vi

I have a X-Fi extreme music & an upgrade kit.{ remote & receiver} The remote will allow me to select music tracks under the the entertainment center, but will not control the volume. I can push +-or - volume all day long, but it always says 00% and dosn't change in intensity. Any Ideas?

Hi
I take it you have used the youp-pax software? If not, then do so. Install revision 2. I did this and my remote is fully working once more.
Must admit I am a little annoyed creative did not provide a link to youp-pax for people wanting to update their drivers. They could have said it was use at your own risk etc, but instead I had to waste two weeks fiddling with vista until I discovered it.
/rant off

Upgrade kit for 4.6b to ECC

Hi Techies
My question is simple
How we can order upgrade kit from SAP ??
we want to upgrade from 46b to ECC6
In market place how we have to navigate ??
Thanks
Haroon

Hi Haroon,
please try http://service.sap.com/swcat, there you can any software.
Navigate "SAP ERP -> SAP ERP 6.0 SR3", there you can find
"SAP ERP 6.0 SR3 Installation & Upgrade"
Regards
Holger

ATI Radeon X1900 XT, Apple Upgrade Kit vs. BTO Option (Mac Pro 1,1) - Same?

This question pertains to the ATI Radeon X1900 XT Video Card, which Apple offered as a BTO Option for the Mac Pro 1,1.
In September 2007 I purchased my Mac Pro 1,1 (2x Intel Xeon 3GHz Woodcrest) and configured it from Apple with the ATI Radeon X1900 as a BTO Option.
Now I know that a number of people initially experienced some problems with this card, but mine has worked perfectly all along. I run FCP, Aperature, and Adobe CS3, and the X1900 has performed excellent.
Leading to my question:
I own more than one Mac Pro 1,1. But the other two machines were not configured with the X1900. And for the past couple of years, I've been regularly searching to find (one or more) Genuine, Original Apple ATI X1900 XT Video Cards - either for sale by someone who has pulled out the X1900 from their Mac Pro 1,1; or, from an Official Apple Reseller. However, all that I've been able to find are - what appear to be either a "knock-off" third party version of the X1900 (flashed for Mac Pro), or; people and/or resellers who claim they are selling a Genuine, Original Apple ATI X1900 XT; except there's one major difference between all of those other video cards, and my X1900 (BTO from Apple, Mac Pro 1,1).
My X1900 does not have an S-Video Port. However, all of the other X1900 cards I've seen advertised for the Mac Pro are pictured with an S-Video Port - which again, mine does not have one.
I've spoken with both Apple Technical Support and Apple Care Representatives (Sr. Advisors), and I've asked them whether it's possible to identify a Genuine, Original Apple X1900; either by the serial number, or possibly by an Apple Part Number.
The Mac Pro 1,1 "Tech Specs" are listed on Apple's Support Site (support.apple.com/kb/SP30). Here, Apple does provide an Apple Part Number for the X1900 as an upgrade (MA631Z/A); however, nobody from Apple can tell from that part number - whether that Apple Part Number corresponds to an X1900 with an S-Video Port, or whether it's identical to the X1900 that was offered as a BTO Option for the Mac Pro 1,1; or whether that particular X1900 was part of an "Upgrade Kit" for the X1900 - which would've been available to purchase from Apple (Apple Store), sometime late in 2007 and/or early 2008. Further, I also know that Apple changed the actual Service Part Number a few times for the X1900.
What I'm trying to find out:
Has Apple ever directly sold, or, has Apple ever officially offered the X1900 w/ S-Video Port - under one of the following Apple Service Part Numbers (661-3297, 661-4335, 661-4911)??
Sorry for the super-long post.
It's just that this has been bugging me for like two years.
Thanks,
John

When I write, I often find that I end posts with what I wanted to say. Put summary at top helps.
What I'm trying to find out:
Has Apple ever directly sold, or, has Apple ever officially offered the X1900 w/ S-Video Port - under one of the following Apple Service Part Numbers (661-3297, 661-4335, 661-4911)??
I don't know. I do know some X1900s are being replaced even if out of warranty, as are 2600s also.
For $249 the ATI 5770.

X-Fi I/O Drive Upgrade Kit and the Headphone Out j

I would?need an extra analog audio out for my new HDTV since I don't have an HDMI-out on my PC and the audio out's on my soundcard are reserved for 7. speakers. I thought the X-Fi I/O Dri've Upgrade Kit might be my solutions since it has an extra headphone out. I have an X-Fi XtremeMusic card and my new telly has L/R-RCA audio ins.
My question is does connectin headphone jack to the X-Fi I/O Dri've mute all other sounds? I would like to be able to use both my S750 speakers connected to the PC and the HDTV speakers connected to the X-Fi I/O Dri've's Headphone?Out?at the same time.
And one extra?question:?Do the headphone out on the I/O dri've introduce dedicated left/rigt channels including all the sound information from the source file being played, or just the left/right channel information as in 7. mode when the soundspectrum is divided between all the eight speakers and when the front left/right channels do not contain all the information? It's a bit tricky to try put into words what I mean, but I hope you can understand.
Thanks for any and all replies!

You can enable/disable the muting on jack input detection.
As for the output, I think it outputs the front left and right, so you would need to switch to headphone mode in order for it to be stereo only. However, the dri've also has digital out and from what I understand, that only outputs in stereo unless it's using a surround sound source such as a DVD, but I could be wrong.

W520 WebCam Upgrade Kit

Similar Messages

Maybe you are looking for