WAD Hierachy filter item: changing style

Hi WAD experts,
it is possible to change the style of a hierachy filter item in the WAD (e.g. change the background color or to design it like a drop down box)?
Thank you
Lars

Hi.
Yes, a filter pane will allow you to set values for multiple characteristics and then hit a button to refresh. You need to UNcheck the "automatic apply" in the properties. The pane will then have the button to update.
See this on [filter panes|http://help.sap.com/saphelp_nw70/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm].
br
Jacob
P.S: mmhhh... and in the link it says "this parameter is not currently supported"
Well, you can do this in a workaround way:
you can use dummy data providers for the dropdown menus, so the system still updates the dataprovider, but because it's not used in your web template for anything else than this, nothing changes in the template. Once you have set all of the dropdowns, you can set a button up to pass the values from these dummy DP's to the "real" ones, to make the content of the template change.
You are able to control the performance of these dummy providers, by keeping the number of records low (aggregates or separate datamarts), so it works, but because you still actually refresh with each change, it's not really a "smooth" feeling...
Edited by: Jacob Jansen on Jan 27, 2010 6:45 PM

Similar Messages

  • SSRS 2012 (SP Integrated) report on SP 2013 PerformancePoint Dashboard: when too many filter items selected together report does not update anymore!

    I am having a situation with SSRS 2012 (SP-integrated) report rendered on SP 2013 PerformancePoint Dashboard using linked PerformancePoint (PP) filters.
    The report works fine as long as too many PP filter items are not selected at the same time. When gradually selecting more items from the filter, the report updates itself until more than a sepecific numer of filter items are selected - the report simply
    does not update itself anymore. This "specific number of filter items", when hit, generates the following error in ULS:
    An exception  occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:  System.UriFormatException: Invalid URI: The hostname could not be parsed.    
     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)    
     at System.UriBuilder..ctor(String uri)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.ReportUrl(SqlReportViewData sqlReportViewData)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderSqlReport(TextWriter writer, ReportView sqlReportView)    
     at Microsoft.PerformancePoint.Scorecards.ServerRendering.ReportViewControl.RenderReportViewControl(HtmlTextWriter writer, ReportView rv)  PerformancePoint Services error code 20700.
    I already know that the cause of the issue is in the length of the query (perhapse RDL or MDX) that the browser is supposed to pass on to the instance of SSAS.
    Some people had suggested a workaround that was suitable for older versions or non-integrated SSRS (see here: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object).
    Knowing this, have already done the changes suggested (adding the lines suggested to SP's web.config for Reporting and the web.config of the site on which report is rendred) at no avail, just to make sure.
    I have rednered the same report on the same dashboard using SSRS filters and there is no problem; it just works fine. This has to be a bug in PP that is causing this.
    Has anyone had the same problem with SSRS 2012 (SP-integrated) report rendered on SP 2013 PP dashboard using PP filter? Any fixes or workarounds?
    thnx!

    Hello everybody.
    I confirm the issue in Service Pack 1 Release 2.
    Poor workaround is to remove the repeated infromation from the member keys (in SSAS they can be really long).
    The issue seems to be specific to SSRS: Excel Services works well with the same filter.
    Sergey Vdovin

  • Expense (PR05) - Line item change report

    Hi:
    We are looking for a report on the changes made in the trip line items after the trip was submitted, approved, transferred to FI (at every status).
    Basically if a consultant has submitted an expense and is approved by the manager, Then if consultant is opening that trip again and making the changes in the line item (change in cost object, amount etc) or adding a new line, we need  a report which tells when was the change made, what was the change etc.
    With the custom program, we are able to get the trip status history but not the line item details (change).
    Any suggestions.

    It tells the status of the trip but doesn't tell me what change is made.
    For example:
    If the original trip had one line for Airfare (say 1000) which was approved and transferred.
    Later on this was adjusted to Airfare (say 1010) which was again approved.
    We want to know amount was changed from 1000 to 1010 on this date. Similarly to cost assignment. Any field which has accounting effect.
    Basically our Accounts payable needs to know if they should settle the expenses without waiting for the receipts at month end (in the scenario where cost object is changed later but amount is same, so there is no revised receipt from consultant. They can just settle it again)
    Some kind of report which tells when and what change was made (at item level).
    Thanks.
    Rahul

  • How to keep filename in textfield when filter is changed in a filechooser

    Hi, guys,
    I met a problem to keep filename in textfield when filter is changed in a filechooser
    for example, a JFileChooser has two filters
    *.jpg
    *.png
    Before I open JFileChooser, I used setSelectedFile(File) to set "aaa.jpg" as default name in textfield.
    when I change the filter to "*.png, ", I want to change the text in textfield to "aaa.png", Actually, I used setSelectedFile(File), If there is an existed file named "aaa.png", this file will be selected on fileView, but the name will not be shown on the textfield. Anybody has ideas?
    Thanks in advanced.

    I really thank you for your answer, but it seems you misunderstand what I said because of my poor english..
    what I said is:
    after you open the filechooser, the filechooser has a combobox to choose file filter and a field to show filename.
    what I want is:
    when you open the filechooser, initial name in field is "test. jpg"
    change filter, "test.jpg" will be change to "test.gif" in the field.
    I don't want to close the filechooser.
    That's why I used a listener to listen JFileChooser.FILE_FILTER_CHANGED_PROPERTY event.
    and I modified your codes
    import java.awt.BorderLayout;
    import java.awt.GridLayout;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.beans.PropertyChangeEvent;
    import java.beans.PropertyChangeListener;
    import java.io.File;
    import javax.swing.JButton;
    import javax.swing.JFileChooser;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.filechooser.FileFilter;
    class Testing extends JFrame {
         String defaultFile = "";
         JFileChooser fc = new JFileChooser(".");
         ExtensionFileFilter eff;
         public Testing() {
              setLocation(200, 300);
              setDefaultCloseOperation(EXIT_ON_CLOSE);
              JButton btnShow = new JButton("Show Chooser");
              JPanel p = new JPanel(new GridLayout(1, 2));
              p.add(btnShow);
              getContentPane().add(p, BorderLayout.SOUTH);
              pack();
              fc.addPropertyChangeListener(new Listener(fc));
              fc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
              fc.setAcceptAllFileFilterUsed(false);
              fc.setFileFilter(new ExtensionFileFilter(".gif"));
              fc.addChoosableFileFilter(new ExtensionFileFilter(".jpg"));
              defaultFile = defaultFile.equals("") ? "Test.jpg" : "Test.gif";
              fc.setSelectedFile(new java.io.File(defaultFile));
              btnShow.addActionListener(new ActionListener() {
                   public void actionPerformed(ActionEvent ae) {
                        fc.showOpenDialog(Testing.this);
         public static void main(String[] args) {
              new Testing().setVisible(true);
    class ExtensionFileFilter extends FileFilter {
         String fileTypes = "";
         java.util.List extensions = new java.util.ArrayList();
         public ExtensionFileFilter() {
         public ExtensionFileFilter(String ft) {
              fileTypes = ft;
         public String getDescription() {
              return fileTypes;
         public boolean accept(File f) {
              if(f.isDirectory()) return true;
              if (f.getName().endsWith(fileTypes)) {
                   return true;
              return false;
    class Listener implements PropertyChangeListener {
        JFileChooser fChooser = null;
        Listener(JFileChooser fChooser) {
            this.fChooser = fChooser;
        public void propertyChange(PropertyChangeEvent evt) {
            if (evt.getPropertyName().equals(JFileChooser.FILE_FILTER_CHANGED_PROPERTY)) {
                 FileFilter fileFilter = (FileFilter) evt.getNewValue();
                if (fileFilter != null) {
                    String fileName = null;
                    if (fileFilter.getDescription().equals(".jpg")) {
                        fileName = "Test.jpg";
                    } else if (fileFilter.getDescription().equals(".gif")){
                         fileName = "Test.gif";
                    String newFileName = "C:\\" + fileName;
                    fChooser.setSelectedFile(new File(newFileName));
    }Thanks again.
    Message was edited by:
    JadeSword

  • PO item change is not updated after Delivery completion

    Dear All,
    PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
    Regards
    Sujith

    Hi Dev,
    After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
    Rgs
    Sujith

  • Radial Filter not changing to outside in Photoshop CC Camera Raw

    Hello folks,
    I realise that I may be missing the very obvious, so apologies in advance - this has been driving me nuts for a few weeks now and I can't find anything in forums to help me out...
    Basically, in Camera Raw filter within Photoshop CC, when I try to add a Radial Filter, I can only get the filter to apply on the inside - clicking the option buttons at the bottom of the menu, the adjustments never move from inside to outside, I can't get any adjustments to apply outside the radial, not even when I select New at the top of the menu either. What am I missing? Hopefully someone will be able to offer a solution!
    Thanks in advance,
    David

    ACR 8.7.1 is current can you post some screen capture where that shows your problem. Ther radio button should cause the current active  Radial filter to change.   Like this one I show that changes exposure of the area. "Must be Active" with overlay checked the boundary outline should be visible.

  • Report on Purchase order header changes and Line item changes.

    Gurus
    All changes which has been done in Purchase order can be seen in enviroment----Header changes Or Item changes for a particular PO.
    Now end user want to see the changes made in all the purchase orders for a particular project in specified date range.
    Suppose there are total 100 POs placed in one month for a particular project. End user want to see the changes MADE (IF ANY) in above POs
    Is there any standard report is available to this effect OR it is z development
    Atul

    HI ,
    This report can easily be written useing the tables EKKO and EKPO
    First get the PO's created in that date range.
    From there get the change document numbers with this extarct the date from CDHDR and CDPOS tables.
    regards,
    Lalita

  • Change Style in task description

    Hi All,
         I am using a decision step in my workflow.  I want to change the default font style associated with the task.  The default is Form: System and the default paragraph is '*'.
         I want to use custom style for formatting the task description.  The Menu option Change style in Change editor is not allowing me to select the zstyle i have created. 
        I will appreciate if anyone can provide me a solution.
    Thanks & Regards,
    Manikandan Ramamoorthy.
    Note:  All supportive answers will be rewarded

    Hi Barry,
    I also checked, and we are not having any options to choose the particular style.
    Hope its a limitation we have in workflow.
    Because when i checked the same option SO10, we have an option choose.
    So workaround will be like this:
    Create your desired text in SO10 with your own style and include that standard text in your task description.
    Hope it solves your issue.
    Thanks and Regards,
    Swaminathan

  • PO item change issue

    Hi all,
    We went live on SAP last month. We are facing below issue in production -
    IDOC is not getting triggered for output type when a PO is changed. we want to replicate the same issue in development system.
    When I looked into production PO changes, I found that PO item is changed for ' Purchasing Document Item Change Date'.
    When I see the item changes, it shows:
    short text - Purchasing Document Item Change Date
    Action - changed,
    new value - 11/05/2010 (this is the date when PO is changed)
    old value - 11/02/2010 (this is the date when PO is created)
    Name - XXX_BATCH
    Change doc object - EINKBELEG
    table name - EKPO
    field - AEDAT
    Can anybody help me understand what is this change all about? and how can I replicate this issue in development system ?
    Regards,
    Pat.

    please read OSS note 456127 - FAQ: Electronic Data Interchange (EDI) in purchasing

  • Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change

    I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
    When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
    Is there another setting required to maintain the page breaks after the item change?
    Thanks.

    We are experiencing the same problem. Did you ever find a solution?

  • Purchasing document item change date

    Hi GUrus,
    Could some one please explain me what is purchasing document item change date. while checking item changes for one PO i am getting this. it is showing one old value and one new value. only i wanted to know where is that date in side a PO.
    Thanks
    Sha

    Hello ,
    When you go to item level changes , sap shows the change history for that particular line items .
    So it will show all the values which is been changed . In terms of date , the old date is the date at which the line item must have been creaated or changed and the new date is the last change date by the user .
    For e.g .if the line item is changed multiple times , then it will show with respect to each date the change history . For better viewing and understanding you can sort the changes by date & find out what was the last change details .
    Hope its clear .
    Lawrence Fernandes

  • Order of Line Items change when billing

    Hi all,
    For some reason the order of the line items change when billing a salesorder
    Salesorder line items:
    10
    20 text line
    30
    When billing it changes in:
    20 text line
    21
    30
    I'm kind of lost on how to solve this.
    With kind regards,
    John Waltmans

    try to do with copy controls... VTLA.. sales doc to delivery doc.. goto item and there take item categioreis..
    there check wethere data transfer
    101
    0
    2
    reard if it helps..
    Ramki

  • Filter items are not set via Redirect to a javascript function

    Hi,
    i have a page with a few filter items and a button which redirects to a javascript function. The problem is that the filter items are NULL in the called javascript function. If i do a submit via another button before then it works.
    Here the details:
    URL Target of the button: javascript:callReport('f?p=&APP_ID.:1:&SESSION.','bir.bir_api.printReportBi?pSessionId=&SESSION.&pBu=&P250_FILTER_BU.&pSupplyTeam=&P250_FILTER_SUPPLY_TEAM.&pMaxBiEff=&P250_FILTER_BI_EFF_MAX.&pGroup=&P250_FILTER_GROUP.');
    Called javascript function:
    function callReport(p_href,p_url)
      var url;
      url = document.getElementById(p_url).value;
      w = open(url,"winRep","Scrollbars=1,resizable=1,width=1100,height=800");
      if (w.opener == null)
        w.opener = self;
        w.focus();
      // wait 5 seconds before reloading
      setTimeout("waitSome()",100);
    Many thanks in advance.
    Regards,
    Martin

    Hi Martin,
    In my example I do a refresh of the report region using  adynamic action. In the report source I've set my filter item as "Page item to submit".
    To open the link for the pdf report I use a dynamic action that fires after refresh of the report region.
    That's it.
    If you want to use your callReport function and need to submit your filter items first, you could try using a ajax post to send the filter values to the database. There's a nice explanation on ajax post in this blog:
    http://apextips.blogspot.nl/2012/09/apex-ajax-basics.html
    Good luck,
    Vincent

  • Need Table/T-code to find purchase req line item changes

    Hi Experts,
    Before the req reaches me it passes through different Pgrp's.
    Is there is a way to find out these changes.

    Hi,
    From ME53N transaction, we can display the purchase requisition item changes.
    Goto ME53N, Select the PR for display, From Menu Bar select Environment-.>Item changes.
    It will display change log of the items.
    Table to view PR log will be of CDHDR and CDPOS as usual.
    Regards.

  • What is the Table to Capture line item changes in PO?

    Dear Guru's
    what is the table in which i can find the report of ammendment in the PO at line item level OR is there any Standard SAP report ???
    please help..
    gaurav

    Go through Following Link
    Report on Purchase order header changes and Line item changes.
    Vipin

Maybe you are looking for