Wad report stuck the system

Hello,
When I use a WAD report and do an operation that takes the system a lot of time to calculate the system is stuck and even if I regret that I did this operation and wants to start the report from the beginning the system will be stuck. Just when I logout from the system and enter it again I can continue to work.
Is there a way to prevent this behavior?
Please Advice,
David

hi David,
in sm50 you can see when accessing which program/table it's stuck. you may also activate trace with RSRTRACE to see in which step it's stuck, base on this we may check what's the problem.
meanwhile, try to run the query with RSRT,
- also try in RSRT 'execute+debug' mark database->display query, after execute check the sql statement, char/kf selected if make sense or unnecessary char/kfs have been selected.
- try menu environment -> delete old abaps, 'generate query'.
- click properties, try read mode = h ...; cache mode '1 - without swapping'
hope this helps.

Similar Messages

Schedule a report with the system date imbeded in the file name

Hello,
Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE? When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
Thanks!

%SI_STARTTIME% will add the time the report ran too.
Adding onlt the date will necessarily have to be done via the appropriate SDK.

Load Report Failed : The System cannot find the path specified

Hi,
I have a .Net windows application and I'm using crystal report in that. Application is published in CITRIX. If I login as Administrator user, reports are generating fine.
But for any other user i'm getting following error while trying to open crystal report
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text **************
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at castlegate.frmFormB.frmFormB_Load(Object sender, EventArgs e) in C:\MyFolder\My Projects\castlegate_with_setup\castlegate\frmFormB.vb:line 401
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
   at System.Windows.Forms.Control.set_Visible(Boolean value)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()
   at castlegate.frmViewEnquiry.btnPrint_Click(Object sender, EventArgs e) in C:\MyFolder\My Projects\castlegate_with_setup\castlegate\frmViewEnquiry.vb:line 340
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Expecting solution to above issue
Regards
NistPS

Hi,
See the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/Rules%20of%20Engagement]
What version of Crystal Reports are you using?
Visual studio version you have?
Have you applied any servcie pack?
Is this on your development computer or on a deployed computer?
If on a deployed system, how was the CR runtime installed to that system?
Regards,
Shweta

The location of the crash reports on the system?

My Mac Pro failed to wake up from sleep (not for the first time), when I pressed a key the monitor did not show anything (apart from a black screen) and I decide to restart it. There was a crash report which appeared after restarting which I was going to post on here, though I clicked the red button.
Are the crash reports located any where on the system in a folder? As this type of crash has happened a couple of times before.
Cheers

Open the Console application in the Utilities folder, click on the Logs icon, look for the various log files in the sidebar. There's a console log as well as various crashreporter logs.

Printing A Report Causes The System To Reboot / Crash

Post Author: rhavlick
CA Forum: Crystal Reports
Hello,
I'm not even sure where to start on this one - I built a few reports in CR XI, and deployed them to the customer's machines. So far 2 out of the 10 at 2 seperate locations will have no problems displaying the report on the screen in the screen in the print preview control for .NET. However, when the user presses Print, and selects just their normal HP Laserjet 4240n printer, it actually goes to the blue screen of death, and then reboots. I upgraded to Crystal Reports 2008, and it's doing the same thing after installing the runtime on the user's machine. Next I tested on another computer at the same office, with the same results to the same printer. Next I tried to print to the Microsoft Office XPS Document Writer and that works from Crystal and then printing to the printer from that. I also tried exporting from Crystal to PDF, and then printing from that which works too. I updated drivers with the latest drivers, one is a HP and one is a Lexmark at 2 different not related locations. It appears to be report dependent since some other reports work.
Is there any way anyone knows how to trouble shoot this issue?
Thanks.

Post Author: rhavlick
CA Forum: Crystal Reports
It's taken me about a month and $600 to purchase printers and return them, etc. to finally get this figured out. What is happening is if you have color on a report, and then print to a printer that doesn't support color printing it actually crashes the O.S. I can't recreate this on all B&W printers, it only appears to happen on some, even though they have the same drivers, etc.
I can strip out colors, and just leave it black white and grey and everything works on the one that was crashing. What I am wondering is if anyone knows of a way I can force CR to print in B&W on a printer that only supports B&W either when it's printing or when it's rendering the report? I do need the reports to be in color for the users with a color printer and it renders fine in color even if you don't have a color printer, but it blows up when you print. Does anyone know if this is possible or have any suggestions regarding this? Thanks.

Crystal Report - Export; The system cannot find the path specified

We are trying to export a reports using the crystal report sdk either export to disk or export to stream. While doing the export
we are getting the following error
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export(ExportOptions options)
Any help would be appreciated much

Try searching and you'll find lots of info on this subject. Look for most recent posts.
Error suggests you are exporting to a folder that does not exist or you do not have permission to write to.
Don

Find out all reports in the system

Hi
I would like to know all the bi reports created on top of Infoproviders. I need report name (not the ID) and the infoprovider.
Any help would be highly appreciated.
thanks,

hi first go to table rsrrepdir there is a field called infocube in fact it is for all infoprovider on what you built a query.
This gives you COMPUID technical id of the queries.
Then in a second step go to table RSZELTDIR. In the field ELTUID paste all the entries you picked up from previous table.
The last field TXTLG gives you the description.
Boujema

Change comma and period in key figure presentation in BEx WAD reports

Hi gurus
We run our BEx WAD reports in the SAP portal. By default the thousands separator is period and the decimal separator is comma. How can I change this so the period becomes the decimal separator and the comma becomes the thousands separator?
Kind regards
Erik

Hi Erik,
you can change this by setting at user parameters.
At system, at any screen (RSA1) -> menu SYSTEM- > USER PROFILE -> OWN DATA -> Defaults Tab, here you can change.
and Save.
these will reflect in WAD report output.
Best Regards.

Error while executing WAD report

Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

can u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

Error when publishing crystal report to the BO server

Hello All:
Has any one encountered the following error when saving a report to the BO server.
Unable to launch C:\program files\Business Objects\BusinessObjects Enterprise 11\win32_x86\plugins\desktop\CrystalEnterprise.Report\ReportAdd program to add report to the system .
....Would appreciate your help.
Thanks
Parmesh

Hi,
looks like a Bug here.
heck SAP Note - 1183390
Regards
-Seb.

Sun would like your help with the "System Name Already In Use" error

A couple of users have reported getting an erroneous "System Name Already in Use" error when re-registering a system after a fresh Solaris re-install. We'd like your help in tracking down this problem.
The scenario is this:
* Install Solaris 10 and register with updatemanager,
* Wipe out the installation and re-install Solaris.
* re-register with updatemanager.
The system erroneously reports that the system name is already in use. It is supposed to detect a duplicate registration of the same system.
We have not been able to reproduce this error in our lab.
If this has happened to you, would you let us know at [email protected]?
Here are the things that we would like to ask of you:
* If you run "updatemanager -debug" if will create a log file /tmp/basicreg<timestamp>.log.
* Details on the exact hardware you have (make/model/configuration).
* Details on the steps you took to get to the bad state. REALLY detailed!
Thanks!
Based on what we know now, we believe you can work around the issue by either:
* Changing the host name and re-registering.
* Creating a different user account and registering the host to that account.
Some previously-posted workarounds are known NOT to work:
* Wait 24 hours and try again.
* Do some "ccr" incantations and try again.

Hi,
Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
Scott Wallace

How to show Crystal Reports in BW system to Business Object XI R3 Portal

Hi All
I have some Crystal Reports in BW system and want to call them on Business Object XI R3 Portal.
Lets say that there are x number of reports in the system.
I need to show them on BO Portal by passing some parameters.
I am not able to start that how I can show them.
I followed one tutorial on Cystal Report for Eclipse and I was able to make a Crysral Report for Web Application.That was deployed successfully. I got one URL to run that.
But now if I want to add this link in my existing BO Portal how can I do that.
Can anyone help me in that, that how to proceed.
Thanks & regards

We don't allow customizing our pages. Any patches installed will over write any changes you do. Create your own user interface.

How to start WAD report from MSS with Hierarchy ?

Hello to all.
I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
The report receive an org unit and display data for it and for all org units under it in the Org. structure.
I start the report from the MSS.
In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
Thanks, Pazit Atar.

I am also facing same problem.
I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
PLEASE HELP.

Hierarchy org unit to wad report from MSS

Hello to all.
I have a WAD Report that the parameters for it are: Org unit - as the root, and a year/month.
The report receive an org unit and display data for it and for all org units under it in the Org. structure.
I start the report from the MSS on portal.
In R/3 in table T77MWBBWS I created an entry for that report with Reference char. = "ORG_STRU" instead of "0orgunit".
The report ignores the Org unit that I choose from the MSS selection screen, and starts with the Root Org unit of my Org structure.
What to do in order to start the report with the Org unit that i select and to get results for all the org. units under it ?
Thanks, Pazit Atar

I am also facing same problem.
I want to know how the org unit which is selected on MSS screen is passed to backend R/3 report (which is using PNP logical db)
PLEASE HELP.

What is the system keychain password?

Every single time I logon to my PB12, an alert pops up asking me for the system keychain password. I have tried the only password on this system but it tells me that is invalid.
I click cancel and everything works fine. It is 'Airport' that is causing it to ask, becuase until I click cancel airport remains inactive.
Why is it asking for the password?
Why won't it accept the only password I have on this system?
Why does it ask, when clicking cancel makes it work fine anyway?
What a pain in the (bottom) this is.

I have a similar problem myself. I can unlock the "System.keychain" keychain, but if I want to move items around, it asks me for the password again.
When I press the unlock button, it asks for the password for my full user name. And that one works, the keychain unlocks. But an unlocked keychain doesn't really let you do much administration on it. You must enter its password for any administration tasks. And that's when I get stuck: the system doesn't accept any password I know of, not even the empty password.
But I can delete items. So I can delete the item, then recreate it in the other keychain.
It seems like the system keychain is like a group, that can contain references to keys so that the whole system can use that key. But is it really like this, or is a copy of the key created, when a key automatically gets into the sytem keychain (like the airport keys)?
PowerBook 12" Mac OS X (10.4.4)

Wad report stuck the system

Similar Messages

Maybe you are looking for