WAD report with Report Item occurs binding error
Hi,
We created a report by Report Designer and embaded in a WAD report. If we run the report in Report Designer,
It can generate the result correctly, but it will show "Binding error for characteristic value: / Binding error for key figure:Dynarmic" if we run it from WAD. Our server is on 7.01 SP6.
Thank you
Best Regards,
Michelle Lee
Hi Michelle,
The normal data references in a query have a reference to a dataprovider which should be static binding.
It may be that by using the Report Designer and then embedding the query in the WAD, the references have been lost and therefore you see the 'dynamic' mesage as the binding is not available anymore.
Hope this helps,
Karen
Similar Messages
-
WAD report broadcasting as PDF error
Hi,
I am trying to broadcast a report in PDF format. The report is from a web template that has a table of 2 rows and 4 columns with 8 chart web items. But the PDF file displays only one graph in a row instead of the 4 defined in the template. What can I do to correct this?
Thanks.Hi Sanjeev,
As i understood that you have 4 Graphs in each row, and u have 2 rows.
The first row has a graph and Table of 2*4 matrix.
But the problem is u r getting only 1 Graph per row in the PDF.
If this is the case:-
I hope this might be the page cutter problem when converting from WEB page to PDF.
Please check the Page settings in the Wed item properties.
If possibel limit it to a sizw where you can see 1 table and 4 Graphs in your web reports itself, so that you have the same in PDF.
User the Insert table options befor putting any beb tiems on toi the Web designer page, it will help you in organize the web items in a proper way.
Best Regards,
VNK. -
IR with reference item in source - Error
I have an reference item (same page) included in an IR source code, however it always give me "No data found" when I run the report AND use the IR reporting function like sort desc , filter ....
Anyway workaround ???
ThankyouHello:
Can you put up a test case at the OTN APEX site ? Alternatively, you could run your page in debug mode and post the debug output here.
varad -
Report Desinger: Binding error for characteristic / Key Figure
Hi,
I am getting the error "Binding error for characteristic: Reference to characteristic".
I have created a report using a query and I have to change the query as per requirement, removed a characteristic.
Now when I execute a report, getting Data binding error.
Does system not changes the report if we change the provider query?
How can this issue be handled apart from deleting existing report and creating a new one?
Appreciate your help in advance.
Regards,
AmitAmit,
First, try doing a save as on your report and save it under a new name. Delete the old one, then re-save it as the same name as before. Then, go in and clear cache so that it will re-build all references in the query. This should remove the error and you won't have to rebuild anything.
Cheers,
Rusty -
Error in Rush Order type with BOM item!!
Hello,
I am facing a very strange error while creating a rush Order with BOM item.
System Error:
1. No item category available (Table T184 SO ERLA TAQ).
I except the error. I get next error as
2. Structure explosion for item 000010 is not possible.
After this BOM explodes with only first 2 Sub Items ( Item cat for main item is determind as TAQ and Sub Items as TAE) , where as the complete BOM has 7 Sub items.
I have made the required configs in item cat determination in T184 table for order type SO, as follows.
SO ERLA - TAQ for Main Item of the BOM
SO NORM TAQ TAE for the Sub Item of the BOM
The same item (BOM ) works very well in OR/BV kind of sales order types, by exploding the BOM to full level(i.e all the 7 sub items are determined).
Has any one come across such an issue. Please let me know what could be the solution?
Thanks in adv,
ShripadHi,
Thanks,
In vov7 for TAQ Item Cat. the structure scope is maintained as 'A'. And that's the reason for Standard order 'OR' , the BOM is exploding properly.
It is only with Rush Order , the BOM is not exploding correctly.
BR
Shripad -
Report data binding error with date values
I have CF7.02 with a Microsoft Visual FoxPro 9.0 SP1 Database
that I connect to using ODBC (FoxPro Driver 6.01.8630.01). I send
my sql results to a CF Report Builder 7.02 PDF report and it works
fine. If I dump the date values before I change them, they look
like the following: {ts '2004-12-20 00:00:00'} . However I have
tried a number of ways of manipulating the date before sending it
to the report, but I continue to get errors. I don't care what
format they go to the report in, since the report reformats them
anyway. I checked to make sure that none of the dates were null.
For example <cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDateTime(#ldCFPrcInputDate#) /> yields values in the
{ts '2004-12-20 00:00:00'} format when I dump the query results to
screen. Where:
ldCFPrcInputDate = 12/20/2004
CreateODBCDateTime(ldCFPrcInputDate) = {ts '2004-12-20
00:00:00'}
ReportQuery.PrcInputDate[lcCurRow] = {ts '2004-12-20
00:00:00'}
I get the error:
Report data binding error Unable to get value for field
'prcinputdate' of class 'java.util.Date'.
coldfusion.runtime.OleDateTime -> Date
Not using the CreateODBCDate function for example <cfset
ReportQuery.PrcInputDate[lcCurRow] = #ldCFPrcInputDate# /> I
get:
Report data binding error Unable to get value for field
'prcinputdate' of class 'java.util.Date'.
java.lang.String -> Date
Here are some of my failed attempts:
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDateTime(#ldCFPrcInputDate#) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
#ldCFPrcInputDate# />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
DateFormat(CreateODBCDate(#ldCFPrcInputDate#),'mm/dd/yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm/dd/yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm-dd-yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
Trim(createODBCDateTime(ldtmpdate)) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate({05-07-2006}) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate('{05-07-2006}') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(05/07/2006) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate('05/07/2006')/>
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(parseDateTime('05/07/2006')) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
parseDateTime(CreateODBCDateTime(05/07/2006)) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
parseDateTime(CreateODBCDateTime('#ldCFPrcInputDate#')) />
<cfset ReportQuery.PrcInputDate[lcCurRow] = '{05-07-2006}'
/>
<cfset ReportQuery.PrcInputDate[lcCurRow] = '{05/07/2006}'
/>
<cfset ReportQuery.PrcInputDate[lcCurRow] = '05/07/2006'
/>
I also did some googling without success. Any help is
appreciated.You may want to make sure that the column is not included in
the query variable list in your report cfr file.
The newest version of the Report Builder, which may be
installed on the server, no longer tolerates vars appearing in that
list of they are not in the query itselft. -
Report Data Binding Error with CFREPORT
I'm getting this error on my production server but not my
testing server when I try to print a report:
Report data binding error Unknown column name :
PK_RegistrationID.
The thing is, the column PK_RegistrationID is not in the
query I'm passing to the cfreport file. And it's not in the
cfreport fiile itself. It is used in other cfreport files in my
application. I'm wondering if this has anything to do with the
version of cfreport on the production server.You may want to make sure that the column is not included in
the query variable list in your report cfr file.
The newest version of the Report Builder, which may be
installed on the server, no longer tolerates vars appearing in that
list of they are not in the query itselft. -
Error while executing WAD report
Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data providercan u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties. -
Report data binding error unknown column name
Hi,
I am having a problem with the new 7.02 update of Report
Builder. The issue is it's not finding my SQL query.
I have wrote my query initally in the advance mode, and it
doesn't seem to reconize it. Is there an issue with this?
I did manage to fix one of my reports by using the basic mode
and selecting all my tables and seting my linkage and criteria.
I have other computers that i have not updated to 7.02 and
they do not have this issue. Below is the error:
Error Occurred While Processing Request
Report data binding error Unknown column name : work_phone.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0;
.NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 127.0.0.1
Referrer
Date/Time 13-Jul-06 02:33 PM
Stack Trace (click to expand)
coldfusion.runtime.report.Report$ReportDataBindingException:
Report data binding error Unknown column name : work_phone.
at
coldfusion.runtime.report.Report.runReport(Report.java:420)
at
coldfusion.filter.ComponentFilter.invoke(ComponentFilter.java:96)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:106)
at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:157)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at
org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
This report works in 7.01. So all query variables match with
a variable in the SQL select statement.
Anyone have any Ideas??
Thanks,
DanielThank you very much for help.
The "Unknown column name " is a field still used in my
report, so I can't remove it.
After I clear the query in the report and reopen the report
and apply the same query back to it, I get different error message:
Element TASKNUM is undefined in QUERY.
The error occurred in : line 1
-1 : Unable to display error's location in a CFML template.
I know for sure this "Element TASKNUM is undefined in QUERY."
is defined in query. each time it complains something different. I
get really confused.
Thanks again.
Yueming -
I have created a banded report split into departments. Each
recore has a value associated with it. The report runs fine if I
dont try to sub-total each departments vale, but if I add a
calculated field to the banding, I get the following error:
Report data binding error Error evaluating expression :
textField_2 Source text : calc.Department_Total.
Variable calc.Department_Total is undefined.
The calculated field is simply the sum of the values, with an
initial value of 0 and set to reset when the group changes on the
department. I am using the same data type for the calc field as it
automatically gave for the original Value field (Big Decimal)
Any ideas?
Dave HDoes anyone have any ideas about this, Its getting a bit
critical now. Has anyone else been able to do sums that calculate
on group changes?? The sum total works for the report, jusyt not
the bands. I desparate here, pulling my hair out.
Regards
Dave H -
Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
OlafHello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany -
When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized. Can't create record file, Please Report" I press O.K. and this pops up - "Error occurred Result= -48". Can't figure out why. First time I have every had problems> What's up with this?
a -48 error is a duplicate filename.
the first things i'd try are the oddball problems fixes:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Report Designer - Binding Error
Hi Guys,
I am trying to use the report designer to build some reports. When I assign any dataprovider to my report - query/query view, I am getting an error "Binding Error for Characteristics"/"Binding Error for Key Figures". Can you please let me know if someone has faced this error and what can be the possible resolution. This is kind of urgent because none of the queries seem to work. We are on SPS 9 which I know is not the best.
Thanks,
Pratik.is it an DROPDOWN you trying to add dataprovider??
Hope it Helps
Chetan
@CP.. -
Discoverer Viewer Report with Page Items Slow Performance
I created a report in Discoverer User that has page items and parameters and runs fine (under 3 minutes) in Discoverer User, but when I try and run it in Discoverer Viewer it takes a long time. It took over 70 minutes before manually terminating it. I made a copy of the report and removed the page items and tried to run it again in Discoverer Viewer and now the report runs in under 3 minutes. Any idea why a report with page items would run in Discoverer user fine, but not discoverer viewer?
I am using Oracle Business Intelligence Plus 10g (10.1.2.55.26)As long as you can access the middle-tier server where Discoverer Viewer is running, you should be able to run and view Discoverer worksheets.
While it is difficult to even start guessing what the problem might be, if the machine you installed Discoverer on has DHCP addressing, you will run into problems.
Thanks
Abhinav
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN : http://www.oracle.com/technology/products/bi/
Discoverer : http://www.oracle.com/technology/products/discoverer/
BI Software : http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples : http://www.oracle.com/technology/products/bi/samples/
Blog : http://oraclebi.blogspot.com/ -
REPORT WITH CHANGING ITEM ON THE SAME COLUMN
Hi to all,
i'm trying to build a report with different item in the same column.
Is that possible in any way using other Oracle technique?
i'm not doing anything specific here, only i would like to know if the following possibility exist or not and how can i let apex render the htmldb_item fields 'dynamically'.
Using this CODE inside a PL/SQL function body returning sql query I obtain the following report content. Such the code of htmldb_item.fields is written, as a field value the HTML_ITEM is not rendered, so only the description of them appear in the report.
Does somebody know some tricks to make it work?
Thanx a lot
1 2 LAST_CALL htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,'dd/mon/yyyy') VALUE
21 1 AGE htmldb_item.text(4,FLD_VALUE,10,10) VALUE
create or replace FUNCTION FNC_GEN_GUI_ITEM(ITEM_TYPE NUMBER) RETURN VARCHAR2 AS
STRHTMLDITEM VARCHAR2(4000);
BEGIN
CASE ITEM_TYPE
WHEN 1 THEN STRHTMLDITEM:=' htmldb_item.text(4,FLD_VALUE,10,10) VALUE ';
WHEN 2 THEN STRHTMLDITEM:=' htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,''dd/mon/yyyy'') VALUE ';
END CASE;
RETURN STRHTMLDITEM;
END FNC_GEN_GUI_ITEM;
MY TABLE AS FOLLOWS:
CREATE TABLE "NEWPROJ"."DINFIELDGUI"
( "ID" NUMBER NOT NULL ENABLE,
"FLD_TYPE" NUMBER,
"FLD_NAME" VARCHAR2(4000 BYTE),
"FLD_VALUE" VARCHAR2(4000 BYTE),
CONSTRAINT "DINFIELDGUI_PK" PRIMARY KEY ("ID"));
Message was edited by:
Marcello NocitoHi to all,
i've solved, is very simple using decode inside the select:
SELECT
ID,
FK_HTMLDB_ITEM, DECODE(FK_HTMLDB_ITEM,1,HTMLDB_ITEM.DATE_POPUP(3,rownum,VAL,'dd-mon-yyyy'),2,HTMLDB_ITEM.TEXT(3,VAL)) VALORE
FROM TESTID
my table is:
CREATE TABLE "DEV"."TESTID"
( "ID" NUMBER NOT NULL ENABLE,
"FK_HTMLDB_ITEM" NUMBER,
"VAL" VARCHAR2(4000 BYTE))
Bye Bye
Maybe you are looking for
-
Print a label for Goods receipt of materials from vendor
Hi, I need to print several labels and I don't know how to do!! First I would like to print a label automatically when I save the good receipt with the MIGO Somebody could tell witch outypes I must to use in NACE, and what is the customising I need t
-
Why do i have a lot of "other" storage?
I just restored my iPod touch 5. It was having problems syncing doubles of all my music. I restored my iPod and re synced all my music. All my music synced properly but now I have over 11 GB of "other" storage. How do i get rid of the other storage.
-
Events in classes LabVIEW 8.6
i have class with some member (counter of something) and i want to generate a user event when this member has specific values. currently i manage to generate the event only if i register the event of the class in the Top Vi that use this class can i
-
I screwed up. I was trying to SYNC and something (error msg) happened. I tried to continue the SYNC and now my IPhone is dead. All I can get when I turn it on is a picture, from bottom to top, I have an WSB connector, an up arrow, and an iTunes i
-
Hello PPRO users I edited a VOB file from an old (privat) DVD in PPRO 5.5 and now want to export this to Encore . But how do I transport this kind of a MPEG file without transcoding to a lesser quality into Encore to burn this on DVD? Thanks for res