Wait time in Synchronour interface with out using bpm.

Hi all,
actually the scenario is RFC to SOAP. Data is flowing from sap to .netserver. The requirement is XI needs to stop the message for 5 min once the data comes to XI from SAP R/3 through RFC.Is it possible in XI.
Thanks & Regards,
Rama

Hi Rama Krishna,
Through BPM its possible, without BPM it's not according to my knowledge.
In the BPM we have wait step, that step haveing 3 parameters type, duration and units.
So in the type you mention wait specified and for the duration you mention the number (ex:5) and for the unit you mention the Minutes.
Based on the above setup it holds the data for 5 minutes after the time is over then it process the data.
Regards
Ramesh

Similar Messages

Async-Sync scenario with out using BPM

Hi All,
With SP19 we can implement File-RFC-File scenario with out using BPM.
But can any one suggest how can I implement the following File-RFC-File scenario without using BPM.
My input file has five elements. A1,A2,A3,A4,A5
The RFC (BAPI) needs A2 and A3 as input and it produces the output R6.
Now in the destination I need to populate D1,D2,D3,D4,D5,D6.
D1 has to be mapped from A1 and so on till fifth element. D6 will be mapped from R6. In order to achieve this we need to store the value of source interface before calling the RFC so that when we get the response back we can populate the entire destination structure.
Can anyone advise how to go about it. I don't want to use a BPM here.
Thanks
Abinash

Hi
the following thread may help you
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File - RFC - File without a BPM - Possible from SP 19.
Thanks,
Ram

Problem with Multimapping with out using BPM

Hi All,
Here i have face a problem when working with multi mapping.
For example I explain u with the following example.
<Message1>
<Employee>
      <Eno>
      <Ename>
</Employee>
</Message1>
<Message2>
<City>
       <Address>
       <Dno>
</City>
</Message2>
Message1,Employee,Message2,City are mapped with constant("").
Here my aim is to create 2 different files with the format as xml structure.
One file with -
<Message1>
Second file with ---<Message2>
this my example... Now I am explaining where i encountered problem in runtime.
Error: Mapping exception
Can not produce target element <Employee>....
Hint: Iam presently using service pack-9.
can one one assist....

Hi,
The problem is in the mapping, you need to check the mapping..
1) did you change the occurence of the messages for the multimapping.. Go to Mapping-->Messages (Tab) and change the occurence of the messages
2) Check the all fields,segments are mapped correctly
3) Test the mapping
4) Check the occurence of the Interface Mapping, and test it in the integration respository
5) check the Source Message Structure and make sure that, it is a valid input to your mapping rules..
Hope this helps,
Regards,
Moorthy

Exception Handling (in Mapping) with out using BPM

Hello All,
We are on SP17. I have a simple flow involving XI
JMS -> XI (Message Mapping -> XSL Mapping) -> Mail
I would like to send an email if there is an exception in any of the mapping. But I <b>don't want to use a BPM</b> for this exception handling. How can I do it?
Thanks
Abinash

Hi Abinash,
yes you can! See these..
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
All the best!
cheers,
Prashanth
P.S Please mark helpful answers

Idoc Acknowledgment to Sql Server with out using BPM

Hi,
My scenario is JDBC --> IDOC and
IDOC ACK --> SQL
For idoc acknowledments,done all the configurations( RBDSTATE,IDX_NOALE) for aleaud message type,
I can see the messages in SXMB_MONI.
But in the aleaud idoc --- it contains only idoc number,but my client requirement is to have the edidc-arckey data in the ALEAUD IDoc.
How can i get the arckey field data in the aledaud idoc.
Please suggest me.
Srinivas

Hi Srinivas,
Check Colin's reply in this thread, may be you will be able to put the value through that BADI
User Exit for Aleaud Idoc
Regards
Suraj

Time Zone Conversion with out using function and with out alter

Hi All,
I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so can any one help me to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
Thank you Very Much.

Hi,
you need to set time zone in your session, let's do an example :
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS';
CREATE TABLE USERA.T
SDATE       DATE                              DEFAULT sysdate,
WITHOUT_TZ TIMESTAMP(6)                      DEFAULT sysdate,
WITH_TZ     TIMESTAMP(6) WITH TIME ZONE       DEFAULT sysdate,
WITH_LZ     TIMESTAMP(6) WITH LOCAL TIME ZONE DEFAULT sysdate
insert into USERA.T(sdate) values(sysdate);
commit;
select * from USERA.T;
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-11.04.23.000000
SQL> alter session set TIME_ZONE ='-7:0';
Session altered.
SQL> select * from system.t;
SDATE
WITHOUT_TZ
WITH_TZ
WITH_LZ
26/09/2013 11:04:23
2013-09-26-11.04.23.000000
26/09/13 11:04:23,000000 +00:00
2013-09-26-04.04.23.000000

Re execute query with out using a time

Hi
I want to refresh data in many based tables blocks automaticly with out using a timer, lest say ever 2 m refresh the data, is there is any soluation for that
best regards

Hi!
If you use a timer, the mouse cursor will not move...
But may the content of an active item get selected, if the timer elapse.
This is just happen, if you have a form open with a running timer
and call another form with the open_form build-in.
When the timer in the calling form elapse, a context switch to
the calling form occurs and when the focus come back to the called form,
may the current-item value is getting selected. But the mouse cursor is not moving!
May you try to requery your block with a timer and see what's happen.
Regards

How to call a stored procedure on time basis with out using sql job and GOTO

Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerley

Raj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

How to take os recovery with out using time machine backup

I ve just bought a macbook pro & I m very new to MAC OS. I wanna to take recovery of only Original OS with out using time machine & I also dnt want 2 store my personal files & stuffs. Pls guys suggest some tips for recovering my os If any problem occurs in future.

S@ggy wrote:
I ve just bought a macbook pro & I m very new to MAC OS. I wanna to take recovery of only Original OS with out using time machine & I also dnt want 2 store my personal files & stuffs. Pls guys suggest some tips for recovering my os If any problem occurs in future.
It's not real clear what you want to do.
Do you mean you don't want to back up your personal data at all, just the operating system? If so, why? Usually it's the personal data -- documents, photos, videos, etc., that are most important to folks, so should be backed-up.
Or do you mean, you have some sensitive data that you don't want anyone to be able to recover if they get your backup disk? If so, Time Machine can encrypt the backups, so anyone without a backup can't recover anything.
Or something else?

How to find the year ago measure with out using time series functions

hi all
is there any way to find year ago sales with out using time series functions like ago
Thanks
Sreedhar

Hello Madan,
Thanks for the reply.
It still doesn't consider the product into account.
My columns are as below
Prod Week End DATE Current Sales Prior Sales % Change
A 12/4/2010 100 0
A 12/11/2010 200 100
A 12/18/2010 300 200
B 12/4/2010 400 300(this value is not for prod B, i want this to b 0 aswell. But we get product A's last sale amount)
Is there any way this can be done. I have tried evaluate,MSUM.
I cannot build a time dimension as all I have is a view.
Thanks,
Deep

How to print a string with out using main method??

how to print a string with out using main method??
if we can tell me with example?
thanks in adavance
raja

Hi,
actually there's none. The UITableView class needs to "know" the tableView's height so either it can calc <number of rows> times <row height> or it has to sum the height of each single row.
If the row which needs to be of different size always is the first or the last row you can user a tableHeader or tableFoot view.
Regards
Dirk

How can i get apps with out using credit card info because i do not have a card ?

how can i get apps with out using credit card info because i do not have a card ?

Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.

How Achieve timedseries calculations with out using AGO And ToDate function

Hi,,
1)
How Achieve timedseries calculations with out using AGO And ToDate functionion
this question asking in interview ..is it possible..?
if yes please response as soon as possible..
2) i have 2 cloumns Product and value...
client requirement is they need ranks based on Value ..in dashboard .using dashboard prompt..edit box...if user enter any number (ex :5 ) report should show top 5 ranks if he enter 20 should be top 20 ranks..
how to achive this ?
thanks,
raj

Consider yor first question:
1. Yes, we can create timeseries measures without using AGO and TODATE
1. Create ALIAS of fact tabe in the physical layer
2. Join the Time id from the ALIAS fact table with the YAGO_MONTH_ID column from your time dimension table (For calculating Year Ago variants) similarly join with MAGO_MONTH_ID column for Month Ago measures.
3.Pull the ALIAS tables as an additional Logical table source in the Lgical layer
4.Keep the mapping of the columns from the ALIAS table as its is
5. For e.g If you pick Revenue from the Year Ago Alias table it will give you the "Prior Year Revenue"
See if this helps you

BDC PROGRAM WITH OUT USING A FM?

Hi Experts,
I need wirte a BDC program for tcode PA30.
i did the screen recording part using tcode-shdb.
i need to use field i recorded as input fields.
Now the main part is how to write code? with out using a class/method?
class/method which i earlier used is class : CL_GUI_FRONTEND_SERVICES.
                                                         method: gui_upload.
am not using ny flat file/xml file to upload?
are there any function modules which i can use?
and how to write code with out using FM?
if any can solve my issue would be very helpful...plz provide code...which would be more helpful.
Thanks in Adv.
Krrish.

Hi,
   If you are migrating employee data, I would suggest you to do it through PA40 transaction rather PA30. systematic screen validations it will go through. If you dont want to use any FM and wanted to do using recording pls find the below code which will update the employee data through PA40 with call transaction method.
SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE   text-001.
PARAMETERS: p_plan TYPE ibipparms-path OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b1.
TYPES: BEGIN OF ty_error,
         pernr TYPE persno,       " Personnel number
         rel_obj_id(12),         " Related Object ID
         msg(200) TYPE c,       " To store Message
       END   OF ty_error.
DATA: i_tplan TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
      i_intern TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
      i_error    TYPE ty_error OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF w_pa000,
       pernr TYPE persno,
       begda TYPE begda,
      END OF w_pa000.
DATA: wa_plan LIKE i_plan,
      wa_messtab    TYPE bdcmsgcoll, " Messages
      wa_error      TYPE ty_error. " Errors
DATA: it_pa000 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
      it_pa002 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
      it_pa001 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE.
DATA: g_mode LIKE ctu_params-dismode VALUE 'N',
       g_file TYPE ibipparms-path.
ALV field catalog
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
      Batchinputdata of single transaction
DATA:   i_bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
      error session opened (' ' or 'X')
Table to hold the return messages
DATA: BEGIN OF i_errmsg OCCURS 10.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF i_errmsg.
ALV List header table
DATA : i_header1 TYPE slis_t_listheader.
ALV List header table
DATA : i_header TYPE slis_listheader.
***ALV Events
DATA: is_layout TYPE slis_layout_alv.
DATA : it_event TYPE slis_alv_event.
DATA : it_event1 TYPE slis_t_event.
To get the F4 help for file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_plan.
PERFORM get_filename.
START OF SELECTION
START-OF-SELECTION.
Initialise data
PERFORM initialise_events.
Retrieve data from Excel file
PERFORM retreive_data.
Populate final data into an internal table
PERFORM populate_data.
Process the excel file data to create a record for IT0007
PERFORM process_data.
END OF SELECTION
END-OF-SELECTION.
PERFORM final_output.
*&      Form GET_FILENAME
FORM get_filename .
*Function module used for F4 help
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_plan.
ENDFORM.                    " GET_FILENAME
*&      Form INITIALISE_EVENTS
FORM initialise_events .
i_header-typ = 'H'.
i_header-key = 'R'.
i_header-info = 'BDC Interface for PA Infotypes 0000,0001,0002'.
APPEND i_header TO i_header1.
CLEAR i_header.
i_header-typ = 'S'.
i_header-info = 'Hiring, Org.Assignment, Personnel Data'.
APPEND i_header TO i_header1.
CLEAR i_header.
***Events and form name
it_event-name = 'TOP_OF_PAGE'.
it_event-form = 'TOP_OF_PAGE'.
APPEND it_event TO it_event1.
ENDFORM.                    " INITIALISE_EVENTS
*&      Form RETREIVE_DATA
FORM retreive_data .
PERFORM upload_data.
ENDFORM.                    " RETREIVE_DATA
*&      Form UPLOAD_DATA
FORM upload_data .
FM to upload data from excel sheet to internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_plan
      i_begin_col             = g_colbeg
      i_begin_row             = g_rowbeg
      i_end_col               = g_colend
      i_end_row               = g_rowend
    TABLES
      intern                  = i_tplan
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form POPULATE_DATA
FORM populate_data .
processing the internal table generated from the function module
Passing data from Excel file to internal table
CLEAR: g_cnt_processed,
         g_cnt_err_processed,
         i_intern,
         i_plan.
LOOP AT i_tplan.
    AT NEW row.
      CLEAR i_plan.
    ENDAT.
    CASE i_tplan-col.
Begin Date
      WHEN '0001'.
        i_plan-pernr = i_tplan-value.
End Date
      WHEN '0002'.
        i_plan-begda = i_tplan-value.
      WHEN '0003'.
        i_plan-massg = i_tplan-value.
Sign
      WHEN '0004'.
        i_plan-plans = i_tplan-value.
      WHEN '0005'.
        i_plan-werks = i_tplan-value.
      WHEN '0006'.
        i_plan-persg = i_tplan-value.
      WHEN '0007'.
        i_plan-persk = i_tplan-value.
      WHEN '0008'.
        i_plan-anrex = i_tplan-value.
      WHEN '0009'.
        i_plan-nachn = i_tplan-value.
      WHEN '0010'.
        i_plan-vorna = i_tplan-value.
      WHEN '0011'.
        i_plan-gesch = i_tplan-value.
      WHEN '0012'.
        i_plan-gbdat = i_tplan-value.
      WHEN '0013'.
        i_plan-fatxt = i_tplan-value.
      WHEN '0014'.
        i_plan-famdt = i_tplan-value.
      WHEN '0015'.
        i_plan-gblnd = i_tplan-value.
      WHEN '0016'.
        i_plan-anzkd = i_tplan-value.
      WHEN '0017'.
        i_plan-natio = i_tplan-value.
      WHEN '0018'.
        i_plan-btrtl = i_tplan-value.
      WHEN '0019'.
        i_plan-gsber = i_tplan-value.
      WHEN '0020'.
        i_plan-abkrs = i_tplan-value.
    ENDCASE.
Appending the internal table tb_data, tb_chng
    AT END OF row.
      APPEND i_plan.
      IF i_plan IS INITIAL.
        g_cnt_err_processed = g_cnt_err_processed + 1.
      ENDIF.
    ENDAT.
ENDLOOP.
To get the total number of records processed
DESCRIBE TABLE i_plan LINES g_lines.
g_cnt_processed = g_cnt_err_processed + g_lines.
CLEAR g_lines.
ENDFORM.                    " POPULATE_DATA
*&      Form PROCESS_DATA
FORM process_data .
CLEAR wa_error.
REFRESH i_bdcdata.
Check if the employee numbers from the template has already been hired
SELECT pernr
         begda
         FROM pa0000
         INTO TABLE it_pa000
         FOR ALL ENTRIES IN i_plan
         WHERE pernr = i_plan-pernr
           AND massn = 'ZA'.
IF sy-subrc = 0.
    SORT it_pa000 BY pernr.
Check if employee has a corresponding infotype 0001 record
    SELECT pernr
           begda
           FROM pa0001
           INTO TABLE it_pa001
           FOR ALL ENTRIES IN it_pa000
           WHERE pernr = it_pa000-pernr AND
                 begda = it_pa000-begda.
    IF sy-subrc = 0.
      SORT it_pa001 BY pernr.
Check if employee has a corresponding infotype 0002 record
      SELECT pernr
           begda
           FROM pa0001
           INTO TABLE it_pa002
           FOR ALL ENTRIES IN it_pa001
           WHERE pernr = it_pa001-pernr AND
                 begda = it_pa001-begda.
      IF sy-subrc = 0.
        SORT it_pa002 BY pernr.
      ENDIF.
    ENDIF.
ENDIF.
LOOP AT i_plan.
    REFRESH i_bdcdata.
***your recording to be pasted here***
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'P0006-BEGDA'.
    PERFORM call_transaction.
    APPEND wa_error TO i_error.
    REFRESH: i_bdcdata, i_messtab.
    CLEAR: wa_error, i_error.
ENDLOOP.
ENDFORM.                    " PROCESS_DATA
*&      Form BDC_DYNPRO
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro   = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
ENDFORM.                    "BDC_DYNPRO
*&      Form BDC_FIELD
FORM bdc_field USING fnam fval.
IF fval <> nodata.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
ENDIF.
ENDFORM.                    "bdc_field
*&      Form ERROR_RECORD_DATA
FORM error_record_data .
CLEAR: g_lines,
       wa_messtab,
       g_msg.
DESCRIBE TABLE i_messtab LINES g_lines.
READ TABLE i_messtab INTO wa_messtab INDEX g_lines.
IF sy-subrc = 0.
    CLEAR g_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = wa_messtab-msgid
        lang      = sy-langu
        no        = wa_messtab-msgnr
        v1        = wa_messtab-msgv1
        v2        = wa_messtab-msgv2
        v3        = wa_messtab-msgv3
        v4        = wa_messtab-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
   IF wa_messtab-msgtyp = 'E'.
    IF wa_messtab-msgtyp = 'S' AND wa_messtab-msgnr = '102' AND wa_messtab-msgid = 'PG'.
      wa_error-pernr = i_plan-pernr.
      wa_error-rel_obj_id = 'S'.
      wa_error-msg = 'Personnel Number Created Successfully'.
    ELSE.
      wa_error-pernr = i_plan-pernr.
      wa_error-rel_obj_id = 'E'.
      wa_error-msg = g_msg.
    ENDIF.
   APPEND wa_error TO i_error.
   CLEAR i_error.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form FINAL_OUTPUT
FORM final_output .
CLEAR g_lines.
SORT i_error.
*************added*********************************************
loop at i_error into wa_error.
    if wa_error-MSG eq 'No batch input data for screen MP000600 2000'.
      wa_error-rel_obj_id = 'S'.
      wa_error-MSG = 'Record Created Successfully'.
      modify i_error from wa_error.
    endif.
endloop.
loop at i_error into wa_error.
    if wa_error-rel_obj_id = 'S'.
      g_cnt_success = g_cnt_success + 1.       " Append success count
    elseif wa_error-rel_obj_id = 'E'.
      g_cnt_failure = g_cnt_failure + 1.       " Append error count
    endif.
endloop.
***Field catalog
PERFORM field_cat.
***Assigning Program name
g_repid = sy-repid.
SORT i_error.
***Display Output
IF NOT it_final[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program       = g_repid
           i_callback_user_command = 'USER_COMMAND'
           i_callback_pf_status_set = 'PF_STATUS_SET'
            i_save                   = 'A'
            it_events                = it_event1
            is_layout                = is_layout
            it_fieldcat              = i_fieldcat[]
       TABLES
            t_outtab                 = i_error[].
ELSE.
   MESSAGE i015(zv_msg) WITH 'No Data Found for this selection'.
   LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.                    " FINAL_OUTPUT
*&      Form top_of_page
      text
FORM top_of_page.
***FM for Displaying Heading
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_header1[]
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form FIELD_CAT
FORM field_cat .
ENDFORM.                    " FIELD_CAT
*&      Form CALL_TRANSACTION
FORM call_transaction .
CALL TRANSACTION 'PA40' USING i_bdcdata
                               MODE g_mode
                               UPDATE 'S'
                               MESSAGES INTO i_messtab.
If call transaction successful
IF sy-subrc = 0.
   g_cnt_success = g_cnt_success + 1.       " Append success count "changed
    PERFORM error_record_data. " Populate all data
If call transaction not successful
ELSE.
    PERFORM error_record_data. " Populate all table
   g_cnt_failure = g_cnt_failure + 1.       " Append error count "changed
ENDIF.
ENDFORM.                    " CALL_TRANSACTION

)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Wait time in Synchronour interface with out using bpm.

Similar Messages

Maybe you are looking for