Exception Handling (in Mapping) with out using BPM

Hello All,
We are on SP17. I have a simple flow involving XI
JMS -> XI (Message Mapping -> XSL Mapping) -> Mail
I would like to send an email if there is an exception in any of the mapping. But I <b>don't want to use a BPM</b> for this exception handling. How can I do it?
Thanks
Abinash

Hi Abinash,
yes you can! See these..
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
All the best!
cheers,
Prashanth
P.S Please mark helpful answers

Similar Messages

Async-Sync scenario with out using BPM

Hi All,
With SP19 we can implement File-RFC-File scenario with out using BPM.
But can any one suggest how can I implement the following File-RFC-File scenario without using BPM.
My input file has five elements. A1,A2,A3,A4,A5
The RFC (BAPI) needs A2 and A3 as input and it produces the output R6.
Now in the destination I need to populate D1,D2,D3,D4,D5,D6.
D1 has to be mapped from A1 and so on till fifth element. D6 will be mapped from R6. In order to achieve this we need to store the value of source interface before calling the RFC so that when we get the response back we can populate the entire destination structure.
Can anyone advise how to go about it. I don't want to use a BPM here.
Thanks
Abinash

Hi
the following thread may help you
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File - RFC - File without a BPM - Possible from SP 19.
Thanks,
Ram

Problem with Multimapping with out using BPM

Hi All,
Here i have face a problem when working with multi mapping.
For example I explain u with the following example.
<Message1>
<Employee>
      <Eno>
      <Ename>
</Employee>
</Message1>
<Message2>
<City>
       <Address>
       <Dno>
</City>
</Message2>
Message1,Employee,Message2,City are mapped with constant("").
Here my aim is to create 2 different files with the format as xml structure.
One file with -
<Message1>
Second file with ---<Message2>
this my example... Now I am explaining where i encountered problem in runtime.
Error: Mapping exception
Can not produce target element <Employee>....
Hint: Iam presently using service pack-9.
can one one assist....

Hi,
The problem is in the mapping, you need to check the mapping..
1) did you change the occurence of the messages for the multimapping.. Go to Mapping-->Messages (Tab) and change the occurence of the messages
2) Check the all fields,segments are mapped correctly
3) Test the mapping
4) Check the occurence of the Interface Mapping, and test it in the integration respository
5) check the Source Message Structure and make sure that, it is a valid input to your mapping rules..
Hope this helps,
Regards,
Moorthy

Wait time in Synchronour interface with out using bpm.

Hi all,
actually the scenario is RFC to SOAP. Data is flowing from sap to .netserver. The requirement is XI needs to stop the message for 5 min once the data comes to XI from SAP R/3 through RFC.Is it possible in XI.
Thanks & Regards,
Rama

Hi Rama Krishna,
Through BPM its possible, without BPM it's not according to my knowledge.
In the BPM we have wait step, that step haveing 3 parameters type, duration and units.
So in the type you mention wait specified and for the duration you mention the number (ex:5) and for the unit you mention the Minutes.
Based on the above setup it holds the data for 5 minutes after the time is over then it process the data.
Regards
Ramesh

Idoc Acknowledgment to Sql Server with out using BPM

Hi,
My scenario is JDBC --> IDOC and
IDOC ACK --> SQL
For idoc acknowledments,done all the configurations( RBDSTATE,IDX_NOALE) for aleaud message type,
I can see the messages in SXMB_MONI.
But in the aleaud idoc --- it contains only idoc number,but my client requirement is to have the edidc-arckey data in the ALEAUD IDoc.
How can i get the arckey field data in the aledaud idoc.
Please suggest me.
Srinivas

Hi Srinivas,
Check Colin's reply in this thread, may be you will be able to put the value through that BADI
User Exit for Aleaud Idoc
Regards
Suraj

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Mapping with out bpm

hi...guys
how we will do 1:n multi mapping with out using bpm , pls explain..
with regards,
Prasad.

Hi Prasad
Go thru the forums given below.. which will discuss the same...
1:N mapping without using BPM
Re: 1:N mapping without using BPM --> IDOC to multiple files
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

How to handle system errors in XI using BPM? please help!

Hi Experts,
I have a requirement where I have to handle system errors. For example when I am making RFC call using RFC adapter if the remote destination is down then I have create a understandable error message and store it in another SAP table.
How to handle it? I am using BPM. I can see that there is "Exceptions" in the send step. How to use this?
Thanks
Gopal

Hi Gopalkrishna,
In this case whenever you get Mapping Exception , you can raise an Exception with the help of BPM and you can send the status to the RFC. But with the help of BPM.
For a Simple case refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through <a href="/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping Exceptions in SAP XI Mapping</a> and see if it helps you solve the problem.
Also go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
Please do let know if it helped.
Regards,
Abhy

How To Split File In to Multiple Files With out using B.P.M

Hi Guys,
How To Split File In to Multiple Files With out using B.P.M.
Thanks in advance
Regards's
KIran.B

Hello
below r the links were u will find message spilitting by graphicaaly i.e without using BPM.
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
Sender File Adapter with file conversion Multimapping --file content conversion with split messg mapping
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748---- [original link is broken] [original link is broken] [original link is broken]
multimappig
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
hope this resolve your problem
thank's
Chetan

How to Execute sql query in PL/SQL ( a variable) with out using Cursor or REF cursor

Hi
I am building a dynamic query based on some conditions
as an example
v_query varchar2(2000);
x1 varchar2(20);
y1 varchar2(20);
z1 varchar2(20);
v_query := ' Select x,y,z into x1,y1,z1 From ... ';
Is there any way to execute the query with out using cursor or ref cursor..
Thanks
Arun

Both Tod and Eric provided valid responses given the format of the queory you supplied. Howver, if you want to use dynamic sql in either way, you need to be absolutely certain that your query will always only return a single row (e.g. SELECT COUNT(*) FROM mytable), because if it retuns more than one, your procedure will break unless you have an exception handler to handle either TOO_MANY_ROWS or OTHERS.
If you want to pull in a lot of data without walking a cursor, you should look at the BULK COLLECT options.

How to know the size of the string with out using the length() method

i want to find the lenght of the
String s="Sudha";
with out using the lenght() method.

Not true (I mean the part about "The only String
call"). But if it had been true, I might haveagreed
with this:
Assuming one uses the 'exception' approach thenwhat
method other than charAt() is needed?I probably misunderstood your post, I thought you
meant that the only alternative to length() would be
charAt() and catching the exception.There are many ways and if the teacher had said find 5 ways of finding the length of a String then I would have fealt happier because it would have meant the student would have to read and study the whole of the String API.
I like
int length = (s+"sabre").lastIndexOf("sabre");

How Achieve timedseries calculations with out using AGO And ToDate function

Hi,,
1)
How Achieve timedseries calculations with out using AGO And ToDate functionion
this question asking in interview ..is it possible..?
if yes please response as soon as possible..
2) i have 2 cloumns Product and value...
client requirement is they need ranks based on Value ..in dashboard .using dashboard prompt..edit box...if user enter any number (ex :5 ) report should show top 5 ranks if he enter 20 should be top 20 ranks..
how to achive this ?
thanks,
raj

Consider yor first question:
1. Yes, we can create timeseries measures without using AGO and TODATE
1. Create ALIAS of fact tabe in the physical layer
2. Join the Time id from the ALIAS fact table with the YAGO_MONTH_ID column from your time dimension table (For calculating Year Ago variants) similarly join with MAGO_MONTH_ID column for Month Ago measures.
3.Pull the ALIAS tables as an additional Logical table source in the Lgical layer
4.Keep the mapping of the columns from the ALIAS table as its is
5. For e.g If you pick Revenue from the Year Ago Alias table it will give you the "Prior Year Revenue"
See if this helps you

BDC PROGRAM WITH OUT USING A FM?

Hi Experts,
I need wirte a BDC program for tcode PA30.
i did the screen recording part using tcode-shdb.
i need to use field i recorded as input fields.
Now the main part is how to write code? with out using a class/method?
class/method which i earlier used is class : CL_GUI_FRONTEND_SERVICES.
                                                         method: gui_upload.
am not using ny flat file/xml file to upload?
are there any function modules which i can use?
and how to write code with out using FM?
if any can solve my issue would be very helpful...plz provide code...which would be more helpful.
Thanks in Adv.
Krrish.

Hi,
   If you are migrating employee data, I would suggest you to do it through PA40 transaction rather PA30. systematic screen validations it will go through. If you dont want to use any FM and wanted to do using recording pls find the below code which will update the employee data through PA40 with call transaction method.
SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE   text-001.
PARAMETERS: p_plan TYPE ibipparms-path OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK b1.
TYPES: BEGIN OF ty_error,
         pernr TYPE persno,       " Personnel number
         rel_obj_id(12),         " Related Object ID
         msg(200) TYPE c,       " To store Message
       END   OF ty_error.
DATA: i_tplan TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
      i_intern TYPE STANDARD TABLE OF alsmex_tabline WITH HEADER LINE,
      i_error    TYPE ty_error OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF w_pa000,
       pernr TYPE persno,
       begda TYPE begda,
      END OF w_pa000.
DATA: wa_plan LIKE i_plan,
      wa_messtab    TYPE bdcmsgcoll, " Messages
      wa_error      TYPE ty_error. " Errors
DATA: it_pa000 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
      it_pa002 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE,
      it_pa001 LIKE STANDARD TABLE OF w_pa000 WITH HEADER LINE.
DATA: g_mode LIKE ctu_params-dismode VALUE 'N',
       g_file TYPE ibipparms-path.
ALV field catalog
DATA : i_fieldcat TYPE slis_t_fieldcat_alv.
      Batchinputdata of single transaction
DATA:   i_bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
      error session opened (' ' or 'X')
Table to hold the return messages
DATA: BEGIN OF i_errmsg OCCURS 10.
        INCLUDE STRUCTURE bapiret2.
DATA: END OF i_errmsg.
ALV List header table
DATA : i_header1 TYPE slis_t_listheader.
ALV List header table
DATA : i_header TYPE slis_listheader.
***ALV Events
DATA: is_layout TYPE slis_layout_alv.
DATA : it_event TYPE slis_alv_event.
DATA : it_event1 TYPE slis_t_event.
To get the F4 help for file
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_plan.
PERFORM get_filename.
START OF SELECTION
START-OF-SELECTION.
Initialise data
PERFORM initialise_events.
Retrieve data from Excel file
PERFORM retreive_data.
Populate final data into an internal table
PERFORM populate_data.
Process the excel file data to create a record for IT0007
PERFORM process_data.
END OF SELECTION
END-OF-SELECTION.
PERFORM final_output.
*&      Form GET_FILENAME
FORM get_filename .
*Function module used for F4 help
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_plan.
ENDFORM.                    " GET_FILENAME
*&      Form INITIALISE_EVENTS
FORM initialise_events .
i_header-typ = 'H'.
i_header-key = 'R'.
i_header-info = 'BDC Interface for PA Infotypes 0000,0001,0002'.
APPEND i_header TO i_header1.
CLEAR i_header.
i_header-typ = 'S'.
i_header-info = 'Hiring, Org.Assignment, Personnel Data'.
APPEND i_header TO i_header1.
CLEAR i_header.
***Events and form name
it_event-name = 'TOP_OF_PAGE'.
it_event-form = 'TOP_OF_PAGE'.
APPEND it_event TO it_event1.
ENDFORM.                    " INITIALISE_EVENTS
*&      Form RETREIVE_DATA
FORM retreive_data .
PERFORM upload_data.
ENDFORM.                    " RETREIVE_DATA
*&      Form UPLOAD_DATA
FORM upload_data .
FM to upload data from excel sheet to internal table
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_plan
      i_begin_col             = g_colbeg
      i_begin_row             = g_rowbeg
      i_end_col               = g_colend
      i_end_row               = g_rowend
    TABLES
      intern                  = i_tplan
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form POPULATE_DATA
FORM populate_data .
processing the internal table generated from the function module
Passing data from Excel file to internal table
CLEAR: g_cnt_processed,
         g_cnt_err_processed,
         i_intern,
         i_plan.
LOOP AT i_tplan.
    AT NEW row.
      CLEAR i_plan.
    ENDAT.
    CASE i_tplan-col.
Begin Date
      WHEN '0001'.
        i_plan-pernr = i_tplan-value.
End Date
      WHEN '0002'.
        i_plan-begda = i_tplan-value.
      WHEN '0003'.
        i_plan-massg = i_tplan-value.
Sign
      WHEN '0004'.
        i_plan-plans = i_tplan-value.
      WHEN '0005'.
        i_plan-werks = i_tplan-value.
      WHEN '0006'.
        i_plan-persg = i_tplan-value.
      WHEN '0007'.
        i_plan-persk = i_tplan-value.
      WHEN '0008'.
        i_plan-anrex = i_tplan-value.
      WHEN '0009'.
        i_plan-nachn = i_tplan-value.
      WHEN '0010'.
        i_plan-vorna = i_tplan-value.
      WHEN '0011'.
        i_plan-gesch = i_tplan-value.
      WHEN '0012'.
        i_plan-gbdat = i_tplan-value.
      WHEN '0013'.
        i_plan-fatxt = i_tplan-value.
      WHEN '0014'.
        i_plan-famdt = i_tplan-value.
      WHEN '0015'.
        i_plan-gblnd = i_tplan-value.
      WHEN '0016'.
        i_plan-anzkd = i_tplan-value.
      WHEN '0017'.
        i_plan-natio = i_tplan-value.
      WHEN '0018'.
        i_plan-btrtl = i_tplan-value.
      WHEN '0019'.
        i_plan-gsber = i_tplan-value.
      WHEN '0020'.
        i_plan-abkrs = i_tplan-value.
    ENDCASE.
Appending the internal table tb_data, tb_chng
    AT END OF row.
      APPEND i_plan.
      IF i_plan IS INITIAL.
        g_cnt_err_processed = g_cnt_err_processed + 1.
      ENDIF.
    ENDAT.
ENDLOOP.
To get the total number of records processed
DESCRIBE TABLE i_plan LINES g_lines.
g_cnt_processed = g_cnt_err_processed + g_lines.
CLEAR g_lines.
ENDFORM.                    " POPULATE_DATA
*&      Form PROCESS_DATA
FORM process_data .
CLEAR wa_error.
REFRESH i_bdcdata.
Check if the employee numbers from the template has already been hired
SELECT pernr
         begda
         FROM pa0000
         INTO TABLE it_pa000
         FOR ALL ENTRIES IN i_plan
         WHERE pernr = i_plan-pernr
           AND massn = 'ZA'.
IF sy-subrc = 0.
    SORT it_pa000 BY pernr.
Check if employee has a corresponding infotype 0001 record
    SELECT pernr
           begda
           FROM pa0001
           INTO TABLE it_pa001
           FOR ALL ENTRIES IN it_pa000
           WHERE pernr = it_pa000-pernr AND
                 begda = it_pa000-begda.
    IF sy-subrc = 0.
      SORT it_pa001 BY pernr.
Check if employee has a corresponding infotype 0002 record
      SELECT pernr
           begda
           FROM pa0001
           INTO TABLE it_pa002
           FOR ALL ENTRIES IN it_pa001
           WHERE pernr = it_pa001-pernr AND
                 begda = it_pa001-begda.
      IF sy-subrc = 0.
        SORT it_pa002 BY pernr.
      ENDIF.
    ENDIF.
ENDIF.
LOOP AT i_plan.
    REFRESH i_bdcdata.
***your recording to be pasted here***
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'P0006-BEGDA'.
    PERFORM call_transaction.
    APPEND wa_error TO i_error.
    REFRESH: i_bdcdata, i_messtab.
    CLEAR: wa_error, i_error.
ENDLOOP.
ENDFORM.                    " PROCESS_DATA
*&      Form BDC_DYNPRO
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro   = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
ENDFORM.                    "BDC_DYNPRO
*&      Form BDC_FIELD
FORM bdc_field USING fnam fval.
IF fval <> nodata.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
ENDIF.
ENDFORM.                    "bdc_field
*&      Form ERROR_RECORD_DATA
FORM error_record_data .
CLEAR: g_lines,
       wa_messtab,
       g_msg.
DESCRIBE TABLE i_messtab LINES g_lines.
READ TABLE i_messtab INTO wa_messtab INDEX g_lines.
IF sy-subrc = 0.
    CLEAR g_msg.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = wa_messtab-msgid
        lang      = sy-langu
        no        = wa_messtab-msgnr
        v1        = wa_messtab-msgv1
        v2        = wa_messtab-msgv2
        v3        = wa_messtab-msgv3
        v4        = wa_messtab-msgv4
      IMPORTING
        msg       = g_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
   IF wa_messtab-msgtyp = 'E'.
    IF wa_messtab-msgtyp = 'S' AND wa_messtab-msgnr = '102' AND wa_messtab-msgid = 'PG'.
      wa_error-pernr = i_plan-pernr.
      wa_error-rel_obj_id = 'S'.
      wa_error-msg = 'Personnel Number Created Successfully'.
    ELSE.
      wa_error-pernr = i_plan-pernr.
      wa_error-rel_obj_id = 'E'.
      wa_error-msg = g_msg.
    ENDIF.
   APPEND wa_error TO i_error.
   CLEAR i_error.
ENDIF.
ENDFORM.                    " ERROR_RECORD_DATA
*&      Form FINAL_OUTPUT
FORM final_output .
CLEAR g_lines.
SORT i_error.
*************added*********************************************
loop at i_error into wa_error.
    if wa_error-MSG eq 'No batch input data for screen MP000600 2000'.
      wa_error-rel_obj_id = 'S'.
      wa_error-MSG = 'Record Created Successfully'.
      modify i_error from wa_error.
    endif.
endloop.
loop at i_error into wa_error.
    if wa_error-rel_obj_id = 'S'.
      g_cnt_success = g_cnt_success + 1.       " Append success count
    elseif wa_error-rel_obj_id = 'E'.
      g_cnt_failure = g_cnt_failure + 1.       " Append error count
    endif.
endloop.
***Field catalog
PERFORM field_cat.
***Assigning Program name
g_repid = sy-repid.
SORT i_error.
***Display Output
IF NOT it_final[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program       = g_repid
           i_callback_user_command = 'USER_COMMAND'
           i_callback_pf_status_set = 'PF_STATUS_SET'
            i_save                   = 'A'
            it_events                = it_event1
            is_layout                = is_layout
            it_fieldcat              = i_fieldcat[]
       TABLES
            t_outtab                 = i_error[].
ELSE.
   MESSAGE i015(zv_msg) WITH 'No Data Found for this selection'.
   LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.                    " FINAL_OUTPUT
*&      Form top_of_page
      text
FORM top_of_page.
***FM for Displaying Heading
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_header1[]
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form FIELD_CAT
FORM field_cat .
ENDFORM.                    " FIELD_CAT
*&      Form CALL_TRANSACTION
FORM call_transaction .
CALL TRANSACTION 'PA40' USING i_bdcdata
                               MODE g_mode
                               UPDATE 'S'
                               MESSAGES INTO i_messtab.
If call transaction successful
IF sy-subrc = 0.
   g_cnt_success = g_cnt_success + 1.       " Append success count "changed
    PERFORM error_record_data. " Populate all data
If call transaction not successful
ELSE.
    PERFORM error_record_data. " Populate all table
   g_cnt_failure = g_cnt_failure + 1.       " Append error count "changed
ENDIF.
ENDFORM.                    " CALL_TRANSACTION

How to call a stored procedure on time basis with out using sql job and GOTO

Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerley

Raj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

Exception Handling (in Mapping) with out using BPM

Similar Messages

Maybe you are looking for