Idoc Acknowledgment to Sql Server with out using BPM
Hi,
My scenario is JDBC --> IDOC and
IDOC ACK --> SQL
For idoc acknowledments,done all the configurations( RBDSTATE,IDX_NOALE) for aleaud message type,
I can see the messages in SXMB_MONI.
But in the aleaud idoc --- it contains only idoc number,but my client requirement is to have the edidc-arckey data in the ALEAUD IDoc.
How can i get the arckey field data in the aledaud idoc.
Please suggest me.
Srinivas
Hi Srinivas,
Check Colin's reply in this thread, may be you will be able to put the value through that BADI
User Exit for Aleaud Idoc
Regards
Suraj
Similar Messages
-
Async-Sync scenario with out using BPM
Hi All,
With SP19 we can implement File-RFC-File scenario with out using BPM.
But can any one suggest how can I implement the following File-RFC-File scenario without using BPM.
My input file has five elements. A1,A2,A3,A4,A5
The RFC (BAPI) needs A2 and A3 as input and it produces the output R6.
Now in the destination I need to populate D1,D2,D3,D4,D5,D6.
D1 has to be mapped from A1 and so on till fifth element. D6 will be mapped from R6. In order to achieve this we need to store the value of source interface before calling the RFC so that when we get the response back we can populate the entire destination structure.
Can anyone advise how to go about it. I don't want to use a BPM here.
Thanks
AbinashHi
the following thread may help you
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File - RFC - File without a BPM - Possible from SP 19.
Thanks,
Ram -
Hi All,
I would like to ask how can imports my dump oracle database file data and struct into sql server 2005
with out make connection oracle.
best regards.
Hakim.Hi Hakim.
Based on your title, what I understood there is a issue regarding transfer oracle db dump to sql database using C# code. Am I right? If so, I am afraid there is no build-in method which meet your requrements in .NET framework. You must provides
OraDump Export API to allow developers integrate corresponding capabilities into their applications. These capabilities are about export data from Oracle dump files into popular databases like Microsoft SQL server. Every developer
having OraDump Export API can write just few lines of code on C# or Visual Basic to implement the appropriate export process.
I am search a third-party link, but it's a paid service.
http://www.convert-in.com/data-migration-service.htm
If you don't have to with code, Please refer to: Migrating Oracle Databases to SQL Server 2000
http://technet.microsoft.com/en-us/library/cc966513.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problem with Multimapping with out using BPM
Hi All,
Here i have face a problem when working with multi mapping.
For example I explain u with the following example.
<Message1>
<Employee>
<Eno>
<Ename>
</Employee>
</Message1>
<Message2>
<City>
<Address>
<Dno>
</City>
</Message2>
Message1,Employee,Message2,City are mapped with constant("").
Here my aim is to create 2 different files with the format as xml structure.
One file with -
<Message1>
Second file with ---<Message2>
this my example... Now I am explaining where i encountered problem in runtime.
Error: Mapping exception
Can not produce target element <Employee>....
Hint: Iam presently using service pack-9.
can one one assist....Hi,
The problem is in the mapping, you need to check the mapping..
1) did you change the occurence of the messages for the multimapping.. Go to Mapping-->Messages (Tab) and change the occurence of the messages
2) Check the all fields,segments are mapped correctly
3) Test the mapping
4) Check the occurence of the Interface Mapping, and test it in the integration respository
5) check the Source Message Structure and make sure that, it is a valid input to your mapping rules..
Hope this helps,
Regards,
Moorthy -
Exception Handling (in Mapping) with out using BPM
Hello All,
We are on SP17. I have a simple flow involving XI
JMS -> XI (Message Mapping -> XSL Mapping) -> Mail
I would like to send an email if there is an exception in any of the mapping. But I <b>don't want to use a BPM</b> for this exception handling. How can I do it?
Thanks
AbinashHi Abinash,
yes you can! See these..
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
All the best!
cheers,
Prashanth
P.S Please mark helpful answers -
Wait time in Synchronour interface with out using bpm.
Hi all,
actually the scenario is RFC to SOAP. Data is flowing from sap to .netserver. The requirement is XI needs to stop the message for 5 min once the data comes to XI from SAP R/3 through RFC.Is it possible in XI.
Thanks & Regards,
RamaHi Rama Krishna,
Through BPM its possible, without BPM it's not according to my knowledge.
In the BPM we have wait step, that step haveing 3 parameters type, duration and units.
So in the type you mention wait specified and for the duration you mention the number (ex:5) and for the unit you mention the Minutes.
Based on the above setup it holds the data for 5 minutes after the time is over then it process the data.
Regards
Ramesh -
With out using IDX2.....in file to idoc scenario
Hi Masters,
i have one doubt .. Can i send normal file from sender system to sap system in the form of idoc.. with out using IDX2...
if it is possible then plz explain me about the steps .. and also explain me wht is the actual use of IDX2 .. as wel as IDX1,,
if u say in IDX2 we have to load the metadata of the idoc .. then we already uploaded the structure of the idoc in XI system ... then why we are using again IDX2 to load the metadata. i have full confusion now .. plz explain me in details ..
hoping for quick response ..
Thanks in advance ,
jp.Hi,
You can send an idoc to SAP system through XI without using IDX2. When u send an Idoc through XI, the metadata will be automatically loaded in Idx2.
IDX1 is used for creating a port in XI for Idoc. This port will be responsible for loading the metadata.
Also have a look at this:
Importance of IDX1
Regards,
Divija. -
How to Execute sql query in PL/SQL ( a variable) with out using Cursor or REF cursor
Hi
I am building a dynamic query based on some conditions
as an example
v_query varchar2(2000);
x1 varchar2(20);
y1 varchar2(20);
z1 varchar2(20);
v_query := ' Select x,y,z into x1,y1,z1 From ... ';
Is there any way to execute the query with out using cursor or ref cursor..
Thanks
ArunBoth Tod and Eric provided valid responses given the format of the queory you supplied. Howver, if you want to use dynamic sql in either way, you need to be absolutely certain that your query will always only return a single row (e.g. SELECT COUNT(*) FROM mytable), because if it retuns more than one, your procedure will break unless you have an exception handler to handle either TOO_MANY_ROWS or OTHERS.
If you want to pull in a lot of data without walking a cursor, you should look at the BULK COLLECT options. -
How to call a stored procedure on time basis with out using sql job and GOTO
Hi,
I wanted to call a stored proc, on time basis ,
please tel me how it can be done with out using sql job , goto .
1) That is, is there any timer aviable in sqlserver.
q2) And which one is better GOTO or sql job.
yours sincerleyRaj, Check if my explanation helps you:
Your job runs every 10 seconds.
Lets say first time you are scheduling and running your job at 12:00:00 PM
Now your proc will start executing.
Say it got finished at 12:00:07.
Now the next schedule time is 12:00:10 PM.
The moment this time hits, the job will get invoked and start executing the proc.
Lets say this time it finished at 12:00:22 PM (It took 2 extra seconds)
This time the scheduled time is already gone (12:00:20 PM), thus it'll now run at the next schedule that is 12:00:30 PM.
Thus if anytime your job takes more than 10 seconds to run, it'll just miss those particular schedules overlapping with execution time. Otherwise you are good to go.
PS: A job is the best way to handle this, in your problem statement you don't need a job but that would be wrong. You have another way to do that, if you keep running your procedure all the time and the moment your timestamp hits a multiple of 10
seconds you can run your logic and then returning to the timer. But this is extremely wrong for a system. Even if your requirement is extremely transactional and complex, I would not suggest this. If the job is taking more than 10seconds (which it might if
your logics inside are complex), you should optimize your code and table architecture.
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is. -
How to use audio and mic with multipoint server with out it crashing on you
how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
them to work at the same time and if posible can i use a non USB deviceLook for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
Claude -
SCCM central site and primary site use the same SQL SERVER with two Instance.
Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community SupportAlthough you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa -
Is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
Sql fire is my machine
Oracle is another machine
When i connect sqlfire with oracle using DBsynchronizer It shows the error message as Wan is not supported for default license
When i connect Sqlfie(my system) with oracle( another system) using JDBC Rowloader .nothing is happening after some time it shows the error like"time out for pool connection to archive database.When i increase the time out also nothing is happening.
what is the reason for above two errors(I stated in the pragraph.)
is it beacuse of wan netwrok not supported by default evaluation license?
could you please explain?I don't think this has anything to do with a VMware product.
-
How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?
I tried using DROP Tables, Truncate Database, Delete and many more but it is not working. I want to delete all tables using Query Analyzer, i.e. through SQL Query.
Please help me out in this concern.
Nishith ShahInformative thread indeed. Wish I saw it early enough. Managed to come up with the code below before I saw this thread.
declare @TTName Table
(TableSchemaTableName
varchar
(500),
[status] int
default 0);
with AvailableTables
(TableSchemaTableName)
as
(select
QUOTENAME(TABLE_SCHEMA)
+
+
QUOTENAME(TABLE_NAME)
from
INFORMATION_SCHEMA.TABLES)
insert into @TTName
(TableSchemaTableName)
select *
from AvailableTables
declare @TableSchemaTableName varchar
(500)
declare @sqlstatement nvarchar
(1000)
while 1=1
begin
set @sqlstatement
=
'DROP TABLE '
+ @TableSchemaTableName
exec
sp_executeSQL
@sqlstatement
print
'Dropped Table : '
+ @TableSchemaTableName
update @TTName
set [status]
= 1
where TableSchemaTableName
= @TableSchemaTableName
if
(select
count([Status])
from @TTName
where [Status]
= 0)
= 0
break
end -
Adding data file with out using brtools /sapdba
Hi all,
How to add data file to table spaces with out using brtools /sapdba.Please let meknow.
Satya.why would you do that? whats your requirement?
You can use sql commands (I prefer doing it via brtools),
example
alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
regards
Juan -
How to compare 2 dates in SQL Server 2000 DB using Java?
How do you compare 2 dates in SQL Server 2000 DB using Java?
Let's say we have two fields: Date Reported and Target Finish Date.
Date Reported is 09-10-2004 09:55:55: PM
Target Finish Date is 09-12-2004 11:59:59: PM
What i want to happen is i want to convert both dates to days and get the difference of the two.
can SQL Server 2000 DB do this?it doesnt wrk.
ok here's what i did:
iv tested a simple code for this case.
I created a table name tblDate which has 3 columns namely date_ID, date_From (datatype datetime), date_To (datatype datetime).
I inserted 1 row: date_ID has the value 1, date_From has the value 10/22/2004, and date_To has the value 10/24/2004.
i run the java code below:
int days = 0;
String query = "SELECT date_From, date_To cast(date_From-date_To AS int) AS Diff FROM tblZoo WHERE date_ID = '1'";
try
DBConnect db = new DBConnect();
db.openCon();
ResultSet rs = db.execute(query);
while(rs.next())
days = rs.getInt("Diff");
db.closeCon();
catch (Exception ex)
System.out.println("Error on Execution: " + ex);
return days;___________
an error occurred: Error on Execution: java.lang.nullpointerexception
Maybe you are looking for
-
Adobe Flash player installation problem on Windows 7
DEar Commerades will appriciate your help with this problem. Have problem with installing the AFP, it will say: " The User does not have sufficient privileges to install AFP " this after turning off Explorer. my browser is Firefox, though did not ev
-
One radio button flag is stored as'Y' in backend
Dear All, Good Evening i have 5 radio buttonss,these radio buttons have one radio group, i want to select only one radio button at a timee before saving i select 1 radio buttonnn no i don't want to store that record with first radio button valuee so
-
The location of the document ... cannot be determined - file save fails.
I'm a bit stuck here. I just got a new mac pro, installed Logic 9 on it. When I try to save my progress in the proj I keep getting the message: The location of the document ** cannot be determined. You can specify where to save it. Needless to say th
-
How to use simpleviewer in iphoto
Hi, first of all happy new year:) My question is: I would like to use simpleviewer with iphoto(on leopard). The construction says the following: http://www.hagus.net/iPhotoExport Unfortunately when I go to Library/Application support/iphoto I only ha
-
Seeing external hard drive for mac 1 mounted proprly on shared mac 2 deskto
Hi I have an imac with an external hard drive connected, which is on the desk top and can be accessed by imovie etc. On my MacBook I can see and use the external drive under the shared section and works fine, however I'd like it to appear on my desk