Want to display BEX report output more than 65000 rows

Hi all,
I want to run a report in BW which has more than 65000 lines. Currently it tells me there is no space. How can I solve the issue please?
user is using BW 3.5 excel 2007
GUI version is 7100.2.9.1039
patch level 9
please advise.
thanks
WHP123

Hi,
Can you try to remove some of the columns of your query.
My doubt , is the no. rows is actually killing the report or the population of higher column also may cause the issue.
try to make a copy of you report, and then remove the charecteristics, keep 1-2 and all KFs. Then run and check for the o/p.
Is it getting over the 65k reows  ?
Thank-You.
Regards,
Vinod

Similar Messages

  • I want to create a report with more than  64 column's.

    I want to create a report with more than 64 column's. I have generated Query the XML.When I tried to create a template for the report.I have Inserted the colum's Wizard and finish it throughing error message. "you cannot create atable with more that 63 coloum's "

    Hi ,
    Can u Check the below thread
    More than 63 columns in rtf template

  • Report with more than 500 rows

    I have a report with more than 500 rows and i donot know the total number of records returned from sql query before hand. Is there any way to dynamically set the MAX ROW COUNT in the report - layout and pagination.
    Thanks a lot
    Sudha

    Hi All,
    The main problem for the scenario is that....Say you first create a SQL query based report with setting the row per page 15 .Now after the region is displayed if u go through the report attributes of the page and change the no. of row per page and apply changes the same will not going to reflect in the report display page.
    For ur case just select the no. of page u want to show while creating SQL Query based report region say 1000 and after creating the region go to the report attributes -> Layout and Pagination -> Max Row Count : 9000 (say).
    I have solved the problem after creating 700 rows and the all rows displayed in the page fine........If u have further issue plz revert back to me.
    Thats solve ur problem i think.....
    Thanks n Regards,
    ROSY

  • Report More than 65000 rows

    Hi Everyone,
    I have a requirement to create report which will pull more than 65000 rows, I have added
    <ResultRowLimit>95000</ResultRowLimit>
    to instanceconfig file. Then I restarted the services and than ran the report. It is not pulling more than 65000 rows even now. Can you please let me know the procedure.
    Thanks in Advance.

    user12217794 also posted this (and has been told off) in the Java Swing forum
    Populate more than 10000 rows in JTable returns Memory Exception
    db

  • Report output more than 255

    Hi,
    I want to print my report more than 255 characters..
    i was taken line size more than 255 but it gives error.
    Please give me the appropriate answer.

    hI..
    THIS FROM  <b>SAP HELP</b>.
    <b>REPORT <rep> LINE-SIZE <width>.</b>
    This statement determines the width of the output list of program <rep> as <width> characters. If you set <width> to zero, the system uses the width of the standard list.
    <b>The maximum line width is 1,023 characters.</b>
    <b>A line can be up to 255 characters long</b>. However, if you intend to print the list, note that most printers cannot print lists wider than 132 characters. If you want to print the list directly while creating it, the page width must comply with one of the existing print formats. Otherwise, the system will not print the list (see Print Parameters). Make sure not to choose a list width exceeding 132 characters, unless you create the list for display only.
    While creating the list, the system field SY-LINSZ contains the current line width. To adapt the list width to the current window width, see Lists with Several Pages.

  • ALV report output more than 255

    Hi All,
    I have write alv list report 
    when i declare like
    WRITE: / SY-ULINE(265).
    it gave me error " Length specification "(265") exceeds fields length ("255").
    i also write in report heading
    "REPORT  ZSIMPLE line-SIZE 500."
    Where is the problem.
    Thanks In Advance.
    Regards,
    Sam

    The field SY-ULINE is defined as 255 characters long (check via SE11 on SYST structure or read [ABAP System Fields |http://help.sap.com/abapdocu_70/en/ABENSYSTEM_FIELDS.htm]), so you cannot use the first 265 characters (that is what SY-ULINE(265) means), try to WRITE:  SY-ULINE(255), SY-ULINE(10). (The maximum line size of a report is 1023 - [LINE-SIZE width|http://help.sap.com/abapdocu_70/en/ABAPREPORT_LIST_OPTIONS.htm#!ABAP_ADDITION_2@2@])
    Regards,
    Raymond

  • Running a  BEx report with more than one query in Background

    I am having a workbook with 2 queries .This workbook needs to be executed at a particular time every day and then save this file to a application server location .
    The file name has to dynamic, as everday a new file has to be created with some date stamp.
    Please let me know the steps/ ideas to achieve this

    Sudhakar,
    are you sure that it has to b a workbook ? running queries independently can be done .. am not sure if a workbook can be scheduled to run...
    One alternative is to use APD - have the queries run and populate two ODS and then have these ODS in a multiprovider and have one query output for the same - seems to be a very longworkaround...
    Another option is to have the queries executed in an ABAP programme and then have the results in an internal table and push both the result sets into an excel sheet ad save it in the application server.
    For reading queries in ABAP there is a functionmodule for the same .. something like RSDRI_INFOPROV_READ .. I am not too sure of the name but there is a function module for sure..
    Hope it helps..
    Arun
    Assign points if it helps..

  • Requirement to display more than 65K rows of data

    Has anyone addressed the issue of Excel not being able to provide more than 65K rows of data with the users? I am working with users whom are concerned about Excel not being able to provide more than 65K rows of data.
    Why would you use BI reporting to report on data more than 65K rows of data. Has anyone designed any reports with more than 65K rows of data. I would imagine that BI reporting is for summarization and it is an on line analytical tool and not a data producing or recording tool.
    Is there a work around if the requirement is to display more than 65K rows of data? Has anyone been asked to do this kind of reporting?

    Hi,
    Please make a search in SDN.This topic has been discussed many times.
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_forums&query=65k&adv=true&sdn_author_name=&sdn_allusernamesofthread=&sdn_category=&sdn_forum=&sdn_updated_on_comparator=ge&sdn_updated_on=
    Regards.

  • Export a BO  report to excel having more than 65500 rows

    Post Author: noble
    CA Forum: .NET
    Please let me know what are the different options available to export BO report having more than 65500 rows to excel 2003.

    Post Author: amr_foci
    CA Forum: .NET
    i think excel will not be able to handle all that records , you can devide your report into some tabs based on a specific condition for every tab, so when you export it to excel you will get many tabs as was exist in the the Business Objects report
    good luck

  • How to display more than 10 rows in an Auto Updating Report

    I followed Carl Backstorm's example, http://htmldb.oracle.com/pls/otn/f?p=11933:40:525653462286833::NO:RP:: to create a page with an auto update report/region. It's working fine (thanks, Carl) but I can't have the report display all rows (38 rows in total). Everytime I press the "Manual Refresh" button, it shows 10 (the first 10) rows only.
    When the report displays at the first time, it shows all the rows (38 rows). Number of Rows and Maximum Row Count are set to 999999 and "No Pagination Selected" in the report region. But after I press the "Manual Refresh" button or specifiy an update time value (like 1 second) to have it auto update, then it only display the first 10 rows.
    Is there a way to display more than 10 rows in an Auto Updating Report using Carl's example auto update report/page? Anyone can help? Thank you.
    -Michele
    Edited by: 106451 on Jun 30, 2010 10:12 AM

    Yes, I changed it to:
    function table_object(pId){
         this.id = pId;
         this.start_record = 1;          //optional
         this.num_record = 50; //optional
         this.num_record2 = 50;          //optional
    I don't quite understand how these vaiables are used for though. Thanks.

  • Apex4.2 - Interactive report display more than 15 rows

    How is it possible to show more than 15 rows?
    If I set up in repoert attributes the row number less than 15 it works but e.g. 100
    it only show me 15 and the page button to the next page.
    How is it possible to work with 120 records so that 100 will be shown
    and 20 on the next page?

    Hi,
    When you run your page where is IR, you can from action menu control how many rows are displayed per page
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/ir_using.htm#sthref1354
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • Report with more than 30 columns

    XML Pub Gurus,
    I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
    So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
    Thanks in advance
    Ram G

    What do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
    Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
    1. Create your query with as many columns as you want.
    2. Don't create a layout at all
    3. Launch Excel Analyzer.
    4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
    5. Upload your excel Analyzer template back to the server
    This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel.

  • Duplicate entries / Employee is appearing twice in report (OR more than onc

    Duplicate entries / Employee is appearing twice in report (OR more than once)
    When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
    I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
    Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
    And how to fix this bug
    Thanks and Regards
    Jaydeep Jadhav

    Hi,
    Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
    1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
    2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
    Delete adjacent duplicate is may  not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
    Hope this information will help you.
    Regards,
    Narendra.Soma

  • Font not displaying on Reports Output (RHEL 5) for 10g

    Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
    However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
    I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
    Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
    I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
    Chris

    They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

  • How to display more than 200 rows in the table?

    Hi Experts,
    Is that possible to display more than 200 rows in a Table.
    when i query from table, it has 1000 rows, i want to display all the 1000 rows in the Table.
    when i query, the values are displaying up to 201 rows only,
    when i click next on 200 - 201 it throws Exception says
    *"Query has exceeded 200 rows. Potentially more rows exist, please restrict your query."*
    let me know how to display all the 1000 rows in a table without Exception.
    Any idea will be highly appreciated.
    Thanks
    Aswath

    The number of rows retrieved is controlled by profile option "FND: View Object Max Fetch Size". I believe 200 is the default value. Pl see these MOS Docs
    386402.1- Query Has Exceeded 200 Rows
    275876.1 - Oracle Application Framework Profile Options Release 11i (11.5.10)
    HTH
    Srini

Maybe you are looking for