Want to Know how to Join more than One Table

I want to SHOW search results based on the search conditions user enters the form (eg: oracle advance search form OTN)
In this case i have to link more than one table and i have fetch the query results based on the user entered conditions in the search form.
can you please guide/help me in how to write/map this query using TOPLINK API.
my query should be like this:
SELECT A.ORDER_NUMBER, B.SAPORDER_NUMBER, C.CUSTOMER_NAME FROM DEAL_QUOTE A, DEAL_SAPORDER B, DEAL_CUSTOMER C
WHERE A.DEAL_QUOTE_ID=B.DEAL_QUOTE_ID AND B.START_DATE = C.START_DATE AND C.END_DATE=B.END_DATE
expecting your valuable reply.
Thanks in advance
Regards
babu

Im not sure this is what you wanted, but couldn't you use a named query in TopLink and then use ADF to display the results?

Similar Messages

Reg: how to join more than one cluster table into one

Hi gurus
How to join more than one cluster table into one
amk

Hi,
You cannot join cluster tables
Best way is to select from the header table and then select from the item table table using for all entries of header table.
regards,
Advait

Network or database calls are made when joining more than one table

Hi Friends,
could anybody please let me know how may networks are called when joining more than one table.
Thanks
Rinky

Hi Rinky,
Normally when a JOIN between two database tables is made then following steps occur:-
1) The control goes to database. Based on the JOINING and WHERE condition, an internal table is created in the DATABASE only which is filled. So here the computation is done at DATABASE level.
2) Once the internal table is filled at database level, it is sent back to the application level.
A Join operation normally minimizes the round trips to the database as most of the computation is done at database level only and results sent back to the Application layer.
<b>Thus for a simple JOIN OPERATION makes a single DATABASE call.</b>
NOTE: If you are satisfied with the explanation, then please reward points
accordingly :).
Thanks and regards,
Ravi .

Does anyone know how to print more than one picture on a page?

I am having trouble finding a way to print more than one image per page with Aperature? Do they have other options like photoshop?
Jim

What I have done is use the book pages with my own layout.
The problem with this is you are hit and miss to get exact final dimensions for each of the images. You need to print and then measure. I used my laser printer to not waste ink and paper, then the Lineups are ok. Once you have your template sizes correct, then you are fine and it is repreducable for any picture package combo you want.
I have fussed with it so I can get 2 5x7s on a page with the correct dimensions.
The photobox property popup has aspect ratio, alignment and should also have a DIMENSION option. This would be super as the rest of the book page layout is pretty flexible.
Good luck.

How to update more than one table using EO

Hi frnds,
Can someone provide me a doc/link which explain in detail how we can we update more than one PL/SQL tables using entity objects(on which VOs are based).
Till date I have been doing this using PL/SQL procedures but now my requirement is to achieve it thru EO.Someone suggested me use VL to achieve plz help
Thanks & Regards,

Hi,
That would be very nice of you,plz send me the docs and also send me similar docs that would be beneficial for a beginner like me.
My id is [email protected]
Thnx for your time.

How to search more than one table in database?

Hello i am new to java
I create 5 tables. I want search 5 table.
I use stored procedure.
we give one keyword that keyword in all tables that column will be display.
for ex: One tables contains IT employee details of one company and they are working different technologies
Second table contains IT employee details of another company
That the problem
I want to the data who are the java employee and which company belongs. And only display the java employees in all tab les
Thank u

sounds like an incredibly bad design.
different tables for different companies? so every time you add a company you have to add a table?
i'd recommend a company table with a 1:m relationship with the employee table. it's normalization 101.
%

How to select more than one slide on Keynote?

Please, someone knows how to select more than one slide on keynote for IPad?

// Allow selection to span one contiguous set of rows, visible columns, or block of cells
table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
// Allow multiple selections of rows, visible columns, or cell blocks
table.setSelectionMode(ListSelectionModel.MULTIPLE_INTERVAL_SELECTION);

How to add more than one input arguments to the tpcall

Hi
Can any one know how to add more than one input arguments in the tpcall using WTC (Jatmi)?
Par example, I have un service Tuxedo getConsoClient(char* cli_id, char* type)
To call this service, I'm using tpcall("getConsoClient", dataIn, 0);
here, I did't know how to add two parameters in the TypedBuffer object. I'm new to WTC.
Any hints will be greatly appreaciated.
Advanced thanks

Thanks for you help. But in java Jatmi, I have lot of problem to convert array into TypedBuffer or TypedString. See below code, I'm tried using vector or tableau etc..
But I have always same erreur. :(
public void getClientInfo() {
     Context ctx;
     TuxedoConnection myTux;
     TypedString numinst = new TypedString("1");
     TypedString idClient = new TypedString("1003");
     TypedString[] dataIn = {numinst,idClient};
     //TypedString dataIn = new TypedString(numinst+"\0"+idClient+"\0");
     Vector input = new Vector();
     input.add(0,numinst);
     input.add(1,idClient);
     Reply rpy = null;
     try{
          System.out.println("getClientInfo called : " + dataIn);
          TuxedoConnectionFactory tcf;
          ctx = new InitialContext();
          tcf = (TuxedoConnectionFactory) ctx.lookup("tuxedo.services.TuxedoConnection");
          myTux = tcf.getTuxedoConnection();
          System.out.println("About to call tpcall cnx = "+myTux);
          rpy = myTux.tpcall("LireInfoCli_SE",(TypedBuffer)dataIn, 0);
          System.out.println("tpcall successfull!");
          TypedFML32 typ = (TypedFML32) rpy.getReplyBuffer();
          System.out.println("Reply Type = "+rpy.getReplyBuffer().getType());
          System.out.println("Reply toString = "+typ.toString());
          while(typ.Fiterator().hasNext()){
               System.out.println("Reply toString = "+typ.Fiterator().next().toString());
          myTux.tpterm(); // Closing the association with Tuxedo
     }catch (TPReplyException tpx) {
          // Could not get the tuxedo object, throw TPENOENT
          System.out.println("TPReplyException perrno = " + tpx.gettperrno()+" DETAILS "+tpx.gettperrordetail()+" getLocalizedMessage "+tpx.getLocalizedMessage()+" "+tpx.getCause());
          tpx.printStackTrace();
     }catch (TPException tpx1) {
          // Could not get the tuxedo object, throw TPENOENT
          System.out.println("TPReplyException perrno = " + tpx1.gettperrno()+" DETAILS "+tpx1.gettperrordetail()+" getLocalizedMessage "+tpx1.getLocalizedMessage()+" "+tpx1.getCause());
          tpx1.printStackTrace();
     }catch (NamingException ne) {
               // Could not get the tuxedo object, throw TPENOENT
               System.out.println("Could not get TuxedoConnectionFactory : " + ne.getMessage());
               ne.printStackTrace();
     }catch(Exception e){
               System.out.println("Exception in getClientInfo ->"+e.getMessage());
               e.printStackTrace();
     return;
}

How to use left outer join on more than one table (source)

Hi all,
In our project we are converting the Unix shell & SQL scripts into OWB mappings. We are facing problem converting left outer join in OWB. here is one of the example. i have just pasted the FROM and where condition.
FROM ym_scr t1, branch_finmonth t3
LEFT OUTER JOIN item_image t2
ON (t1.branch_no = t2.branch_no
AND t1.item_no = t2.item_no
AND t3.to_date between t2.tran_dt and t2.to_dt
AND t2.to_dt >= '$start_images' ) <<<========= '$start_images' THIS COMES FROM THE UNIX VARAIBLE ,
We converts the same when we are putting it in OWB join Operator
INGRP1.branch_no = INGRP2.branch_no(+)
AND INGRP1.item_no = INGRP2.item_no(+)
AND INGRP3.to_date between t2.tran_dt and t2.to_dt
AND INGRP2.to_dt >= INGRP2.start_images
But as you see in the OWB opreator we can put left join with INGRP1 with INGRP2.
We can not make same join with INGRP3 & INGRP4 , becoz it failed saying "you cannot left outer join on more than one table/source".
so overall this OWB code makes incomplete left outer join as per the above ANSI SQL join in Oracle.
Bcoz of the problem we are getting less number of rows...........
SO please please help me on this
Regards
Ashok

Hi.
I know this topic is here for a while now, but I had the same problem today, searched for help and didn´t find anything.
Later I figured out how to do this.
You just have to put the (+) one time, and the OWB converts in an LEFT OUTER JOIN statement.
For this case, all you have to do is:
( INGRP1.branch_no = INGRP2.branch_no(+) AND INGRP1.item_no = INGRP2.item_no AND INGRP2.to_dt >= INGRP2.start_images )
Regards,
Godoy

How can i join more than 20 tables which contains more than 5 lacks records

how can i join more than 20 tables which contains more than 5 lacks records

If you're trying to join 20 tables I would check:
- Are all the joins necessary. It's easy sometimes to just join to another table because you're unsure as to whether it's required.
- What sort of application is it? 20 joins seems a lot to me. Are you trying to achieve too much with one query? Is it possible to break the problem down?
- If it is necessary to join so many tables then force the use of hash joins in the query, especially if you're processing a lot of data and want the best throughput. If you want a quicker response, this will not be a appropriate.

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

TS2083 How do you know if you have more than one graphics card installed?

How do you know if you have more than one graphics card installed? My MacBook Pro does not provide a connectivity to TV via HDMI.

You can go to <http://support.apple.com/specs/#macbookpro> find your Mac's technical specs.
Depending on what kind of video output port you have, you should be able to get an adapter to HDMI. For example a Mini Display Port to HDMI (I have one of these).

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

How to pass more than one parameter

Hello,
This is my code.
How to pass more than one parameter:
SELECT:responsibility_name responsibility_name,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.entry_sequence sequence ,
LPAD(' ', 6*(LEVEL-1))
|| menu.user_menu_name SubMenu_Description ,
LPAD(' ', 6*(LEVEL-1))
|| func.user_function_name Function_Description ,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.prompt prompt
,menu.menu_id ,
func.function_id
--menu_entry.grant_flag Grant_Flag ,
--DECODE( menu_entry.sub_menu_id , NULL, 'FUNCTION' , DECODE( menu_entry.function_id , NULL, 'SUBMENU' , 'BOTH') ) Type
FROM fnd_menu_entries_vl menu_entry ,
fnd_menus_tl menu ,
fnd_form_functions_tl func
WHERE menu_entry.sub_menu_id    = menu.menu_id(+)
AND menu_entry.function_id      = func.function_id(+)
AND MENU.LANGUAGE(+) = 'US'
AND FUNC.LANGUAGE(+) = 'US'
--AND func.user_function_name LIKE '%Primary Care Providers%'
AND grant_flag                  = 'Y'
START WITH menu_entry.menu_id =
(SELECT menu2.menu_id
FROM fnd_menus_tl menu2,apps.fnd_responsibility_vl resp
WHERE menu2.menu_id=resp.menu_id
and resp.responsibility_name= :responsibility_name
--and menu2.user_menu_name = ('ATCO HR INQ USER'
AND LANGUAGE = 'US'
CONNECT BY MENU_ENTRY.MENU_ID = PRIOR MENU_ENTRY.SUB_MENU_ID
   and menu_entry.function_id not in (select func.function_id
                                   from --fnd_form_functions_vl fnc,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                  where func.function_id = exc.action_id
                                  and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
and menu_entry.sub_menu_id not in (select menu.menu_id
                                   from --fnd_menus_vl imn,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                   where menu.menu_id = exc.action_id
                                   and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
ORDER SIBLINGS BY menu_entry.entry_sequence;
Thank you for your help
Shuishenming

Hi, Ming,
One way is to put the "parameters" in a table, and join to that table in your query. If you make it a Global Temporary Table, then multiple sessions can run the query at the same time, and each can be seeing different responsibilities.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. Since this problem involves parameters, you should give a couple of different sets of parameters, and the results you want from the same sample data for each set.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How to add more than one datafile while creating tablespace

how to add more than one datafile while creating tablespace. I know by using alter command i can add datafile but i want while creating tablespace

Hi Dadivela,
how to add more than one datafile while creating tablespace.Here is the syntax:
!http://www.dba-oracle.com/images/create_tablespace.jpg!
I do it like this:
create tablespace myts
datafile
*'/u01/app/oracle/db1.dbf' size 100m,*
*'/u02/app/oracle/db2.dbf' size 200m;*
Here are my complete notes:
http://www.dba-oracle.com/t_tablespace_create_alter.htm
Hope this answers your question . . .
Donald K. Burleosn
Oracle Press author

Want to Know how to Join more than One Table

Similar Messages

Maybe you are looking for