Network or database calls are made when joining more than one table

Hi Friends,
could anybody please let me know how may networks are called when joining more than one table.
Thanks
Rinky

Hi Rinky,
Normally when a JOIN between two database tables is made then following steps occur:-
1) The control goes to database. Based on the JOINING and WHERE condition, an internal table is created in the DATABASE only which is filled. So here the computation is done at DATABASE level.
2) Once the internal table is filled at database level, it is sent back to the application level.
A Join operation normally minimizes the round trips to the database as most of the computation is done at database level only and results sent back to the Application layer.
<b>Thus for a simple JOIN OPERATION makes a single DATABASE call.</b>
NOTE: If you are satisfied with the explanation, then please reward points
accordingly :).
Thanks and regards,
Ravi .

Similar Messages

New rapport crashes CR when adding more than one table

Hello SAP Community Network Forums.
First post, so I hope I landed in the right place.
If I create a new rapport and add more than 2 tables to the rapport, CR shutdown. The following error is generated:
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
u2026
Description:
Faulting application crw32.exe, version 11.5.12.1838, faulting module pgoe1024.dll, version 6.0.0.168, fault address 0x00018404.
a)     Installed a trial version of CR 2008. Same result.
b)     Using: XI 11.5.12.1838
c)     Running against a Progress 10.2B db. Updated with SP 4.
d)     Existing rapport is running fine (as long as no more than 1 table is added)
Any ideas/suggestions would be much appreciated. Regards, Lars.
Edited by: larsc-app on Apr 29, 2011 3:40 PM

Hi!
Are you using auto smart linking functionality of Crystal ? If so, try without auto smart linking with tables - works with me...
I think the bug is laying on the newest odbc-driver of OpenEdge, above few rows of readme file that game with openedge 10.2b sp05 :
Note: OE00205286    Type: Workaround
A file DSN connection to Crystal RDC fails with ODBC 6.0 Drivers
DataDirect ODBC 6.0 drivers can not handle the full path of a file DSN, causing
a connection to Crystal RDC to fail. Use the ODBC 5.3 drivers instead of 6.0
with Release 10,2B05 to work around this problem with the driver.
-> if you can, try to use older driver (pgoe23...)..
-Ari

Want to Know how to Join more than One Table

I want to SHOW search results based on the search conditions user enters the form (eg: oracle advance search form OTN)
In this case i have to link more than one table and i have fetch the query results based on the user entered conditions in the search form.
can you please guide/help me in how to write/map this query using TOPLINK API.
my query should be like this:
SELECT A.ORDER_NUMBER, B.SAPORDER_NUMBER, C.CUSTOMER_NAME FROM DEAL_QUOTE A, DEAL_SAPORDER B, DEAL_CUSTOMER C
WHERE A.DEAL_QUOTE_ID=B.DEAL_QUOTE_ID AND B.START_DATE = C.START_DATE AND C.END_DATE=B.END_DATE
expecting your valuable reply.
Thanks in advance
Regards
babu

Im not sure this is what you wanted, but couldn't you use a named query in TopLink and then use ADF to display the results?

Startup issue when having more than one database on machine

Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AM

aymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM

Oracle OUTER JOIN on more than one table

Hi!
Friends, please help with this urgent problem: How can an outer join be written on more than one table?
An SQL Server query:
SELECT * from a INNER JOIN b on a.id = b.id LEFT OUTER JOIN c ON c.id = a.id AND c.id = b.id
works fine with SQL SERVER
But Oracle query:
SELECT * from a,b,c WHERE a.id = b.id AND a.id = c.id (+) AND b.id = c.id (+)
gives an error: OUTER JOIN cannot be used on more than one table? Why?
I use OracleDriver from classes12.zip to connect to Oracle8i database.
Please, help!

The Oracle 8i and later SQL reference reads that the following "join_types" are supported and under this syntax it does not limit the LEFT OUTER JOIN (syntax the same as SQLServer example in original note) to two tables as implied in these notes:
The join_type indicates the kind of join being performed:
Specify INNER to indicate explicitly that an inner join is being performed. This is the default.
Specify RIGHT to indicate a right outer join.
Specify LEFT to indicate a left outer join.
Specify FULL to indicate a full or two-sided outer join. In addition to the inner join, rows from both tables that have not been returned in the result of the inner join will be preserved and extended with nulls.
You can specify the optional OUTER keyword following RIGHT, LEFT, or FULL to explicitly clarify that an outer join is being performed.

How to use left outer join on more than one table (source)

Hi all,
In our project we are converting the Unix shell & SQL scripts into OWB mappings. We are facing problem converting left outer join in OWB. here is one of the example. i have just pasted the FROM and where condition.
FROM ym_scr t1, branch_finmonth t3
LEFT OUTER JOIN item_image t2
ON (t1.branch_no = t2.branch_no
AND t1.item_no = t2.item_no
AND t3.to_date between t2.tran_dt and t2.to_dt
AND t2.to_dt >= '$start_images' ) <<<========= '$start_images' THIS COMES FROM THE UNIX VARAIBLE ,
We converts the same when we are putting it in OWB join Operator
INGRP1.branch_no = INGRP2.branch_no(+)
AND INGRP1.item_no = INGRP2.item_no(+)
AND INGRP3.to_date between t2.tran_dt and t2.to_dt
AND INGRP2.to_dt >= INGRP2.start_images
But as you see in the OWB opreator we can put left join with INGRP1 with INGRP2.
We can not make same join with INGRP3 & INGRP4 , becoz it failed saying "you cannot left outer join on more than one table/source".
so overall this OWB code makes incomplete left outer join as per the above ANSI SQL join in Oracle.
Bcoz of the problem we are getting less number of rows...........
SO please please help me on this
Regards
Ashok

Hi.
I know this topic is here for a while now, but I had the same problem today, searched for help and didn´t find anything.
Later I figured out how to do this.
You just have to put the (+) one time, and the OWB converts in an LEFT OUTER JOIN statement.
For this case, all you have to do is:
( INGRP1.branch_no = INGRP2.branch_no(+) AND INGRP1.item_no = INGRP2.item_no AND INGRP2.to_dt >= INGRP2.start_images )
Regards,
Godoy

IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time. Apple and 3rd party applications - all freeze the main menu. Safe mode seems to work OK. Tried repairing permissions - didn't work.

For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?

Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

How can i join more than 20 tables which contains more than 5 lacks records

how can i join more than 20 tables which contains more than 5 lacks records

If you're trying to join 20 tables I would check:
- Are all the joins necessary. It's easy sometimes to just join to another table because you're unsure as to whether it's required.
- What sort of application is it? 20 joins seems a lot to me. Are you trying to achieve too much with one query? Is it possible to break the problem down?
- If it is necessary to join so many tables then force the use of hash joins in the query, especially if you're processing a lot of data and want the best throughput. If you want a quicker response, this will not be a appropriate.

Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page

Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
Ronny

Hi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Can a personnel area be assigned to more than one company code?

Hi experts,
Can a personnel area be assigned to more than one company code?
Regards,
Anita George

Yes, as Siva said it is not possible.
Between personnel area and company code -
many to one mapping is allowed but one to many is not allowed. That is you can map more than one PA to 1 company code but 1 PA can not be map to more than one company code.

When using more than one tab, once I have opened a pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the pdf into it's own window?

when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.

I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

Reg: how to join more than one cluster table into one

Hi gurus
How to join more than one cluster table into one
amk

Hi,
You cannot join cluster tables
Best way is to select from the header table and then select from the item table table using for all entries of header table.
regards,
Advait

Macbook Pro mid 2012 starting to lag when running more than one program.

Firstly mah specs :
Retina, Mid 2012
2.3 GHz Intel Core i7
8gb 1600 MHz DDR3
NVIDIA GeForce GT 650M / Intel HD 4000
OS X 10.8.4 (12E55)
So, i bought this macbook about a year and a month ago and since i bought it everything has run fine, it has always been fast and smooth, until around 2 months ago when it started getting a little laggy in handling more than one program being open. Before this i was able to run Photoshop, Cinema 4D, Second Life and Chrome all at once and recieved no speed decrease what so ever. So i figured that it must just have been a little clogged up maybe, honestly wasnt sure but tried clearing cache, tried freeing up memory with some of the mac memory management tools from the App Store and non of these worked so in the end i backed up what was important and wiped the HD and re installed the OS. Annoyingly i am still having problems, if i have Photoshop open and i am surfing chrome it lags on scrolling web pages or loading links. If i have Second Life open i seem to lag with more than 3 players around me quite badly, even if i put Second Life onto its lowest Graphic Settings i still lag where as before i had this issue i could run it on its highest Graphic Settings and recieve little to no lag what so ever. This happens for most programs that used to run smoothly, if i now open Cinema 4D and try anything else.....the system slows down.
I COULD take this to the apple store and genuis bar and ask them to have a look at it HOWEVER i am back at Uni in 2 weeks and i need the macbook for my studies as i am currently working on a summer project and need it for research, can any of you Mac Wonders out there suggest anything else for me to try. I have checked the HD and it says its not failing and is verified and found no issues with the partition.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Network or database calls are made when joining more than one table

Similar Messages

Maybe you are looking for