WAP321 Isolate guest from local LAN
I have been searching for an easy explanaition on how to create a guest SSID and isolate them from accessing local LAN, however, they need (obviosly) to be able to use the default GW and DNS server on local LAN, as I can not se any way that the WAP321 can act as an dhcp server for individual SSID's and thus use external DNS and act as default GW for independant SSID's.
Please someone tell me straight forward how to do this.
I'd like to do this without using VLAN tagging.
Thks
Kristian
Hello
The ACL should not affect the "non-guest" SSID at all, make shure you have not "assigned" the ACL to non guest.
Prior responcce:
The Switches in this environment is layer 2, thus no VLAN tagging (it is a SOHO environment, actually a resturant) The DNS/DCHP is delivered by the internett router, as I mentioned earlier, if you have seperate DNS/DHCP units, you will have to allow acces to these IP's, you should then limit the TCP/UDP ports to DNS/DHCP port. (I assume that Guest should not have access to domain or domain servers, in your enviroment you will as mentioned have to give access to relevant TCP/UDP ports on the server/DC)
If you have switches VLAN cappable, I'd use VLAN tagging, that would be a "cleaner" and probably more secure solutions
Hope this helps
Br
hkl
Similar Messages
-
Support DirectAccess Clients from local lan?
We've implemented DirectAccess 2012 R2 and are trying to use remote desktop and SCCM remote assistance to support offsite systems connected by DirectAccess.
I can use a DirectAccess remote client to remote desktop to a local windows system, but I cannot use that same local system to connect to the same remote resource. I believe this may be a routing issue on our LAN.
I can Remote Desktop from the direct access server to a DirectAccess remote client.
Pings fail with "Ping request could not find host testhost01. Please check the name and try again."
Tracert fails with "Unable to resolve target system name"
NSlookup returns 3 IPv6 addresses for the host
This is the last piece of the puzzle to have DA working 100%
Any pointers? Places to look?
Thanks!!Hi,
Do you use IPv6 in your internal network?
If no, it should not be an issue.
If the intranet is only using IPv4, NAT64 and DNS64 will be enabled on the DirectAccess server.
Similar to NAT, the DirectAccess clients are hidden by the NAT64. We can't access a machine behind NAT.
Best Regards.
Steven Lee
TechNet Community Support -
Vpn site to site isa 570 to asa 5505 multiple local lan
Hello, i have configured a site to site vpn with a asa 5505
In the tunnel will pass the network 172.x.x.x/16 and 192.168.x.x/24 from local isa to a single lan 192.168.x.x/24 on remote asa
I have create a group network address and i put the the default_lan and the other lan in it
In the tunnell configuration i have use this group address with local lan parameter
When the tunnel was up in the routing table i view the remote lan on interface ipsec0 but also i view the local lan on interface ipsec0
Is this configuration n ot supported?
Thank best regardsHello, thank for answer.
The problem is that tha second lan is a routing static lan.
The ip address of ISA is 172.16.10.254/16 and the default_lan is 172.16.0.0/16
The second lan is 202.1.1.0/24 and it is a staic lan on another gateway.
When the site-to-site ipsec go up in routing table i see three route on interface ipsec0:
The remote lan, the default-lan (that is also on default interface. Behaviour?) and a subnet lan 172.16.10.0/24.
If i ping from a lan pc an ip of subnet 172.16.10.0/24, i see that the arp is equal at mac-address of ISA and i have a problem on the lan. It's normal?
Best regards -
UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION
Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn . -
I have a local LAN DNS server. My preferences point to that server. Why does dig give me 8.8.8.8 as my DNS server?
Something is/was modifying my DNS preferences to 8.8.8.8 It seems to be pointed correctly now (at my local LAN DNS server), but why was it pointed at 8.8.8.8 before? I never want it pointed to 8.8.8.8You've hit the nail on the head Ben. For point to point communications, the IP addresses should be fixed, therefore there is no need for DNS. If a DNS is configured, the NIC (Network Interface Card) drivers will try to contact it.
In my test system, I need DNS for the test computer, but I am communicating with a dedicated Spectrum Analyzer over TCP/IP. So I added a second NIC. The main NIC is configured for DNS and all that jazz. The second NIC (plugged into PCI slot) is configured with a hard coded address, no DNS, no Gateway, nothing else. I connect that NIC to the spectrum analyzer using a crossover cable. The analyzer is configured with a hard coded address also. Now my computer can get on our company network, and the spectrum analyzer is isolated from the network, so it can't catch any viruses, etc., and it still talks to the computer. When using a configuration such as this, it is best to use a dedicated address for the 2nd NIC and spectrum analyzer in the range of 192.168.100.0 to 254
- tbob
Inventor of the WORM Global -
firefox 7.0 - Can not upload the file from local machine to server...gives "error 404 : file not found"
you have not understood my point
how does this code will run on servlet when I want to upload a file from client's
machine to server machine
what I am doing is I am giving an option to the user that he/she can browse the file and then select any file and finally it's action is post in the jsp form for which I have sent the code
All the computers are connected in LAN
So how to upload a file from client's machine to server's machine
Plz give me a solution -
I have a user that has an Exchange email account setup on his iPad (Wi-Fi only) and it works fine when he is away from the company. When he is connected to the companies Wi-Fi and is on the same local subnet as the Exchange server he can't connect to the server. He receives this error "Cannot Get Mail The connection to the server failed" Does anybody have any ideas, thanks?
JoeMy guess would be that your LAN's DNS server can't do internal routing. Many low-cost firewall/routers can't resolve a external domain name that point's back to itself. Assuming you have Outlook Web Access enabled, you can test this from a PC or Mac. In a browser, type in the domain name you used to configure the iPad.
For example, Outlook Web Access for my Exchange Server when I'm outside of the office is www.mycompany.com/owa. With my old router, if I typed that in while I was in the office, it would give me page not found. Typing in the local LAN IP address of the server rather than the domain name would work. (e.g.: 192.168.1.2/owa) Because www.mycompany.com pointed back to the LAN I was on, the routing failed. But of course, using the internal IP address wouldn't work when outside the office unless I also configured a VPN. (The VPN would connect the iPad to the "directly" to the internal LAN.)
I don't have any simple solution. What I did was replaced my router. There were other reasons I needed to replace the router, but one of the additional benefits was to get the internal routing.
So either get a different router or internal DNS server (or reconfigure the internal DNS server to route correctly, if possible. Or setup a VPN and configure the iPad to only use the internal IP address of the Exchange server. -
Running lync on local lan ?
can lync server be run on local lan only ? for example a LAN in a remote location where there is no internet ? however the size of LAN is large with lots of client spread over a distant area.
Also is Lync server bundled in Exchange Server 2013 ?
sorry i am new to this.
regards
FaisalAgree with Anthony. yes, you can run lync on LAN but users will be able to connect with lync on LAN only cand can't connect from their home/outside.
On premises, Lync Server is not Bundle with Exchange Server 2013. you will need to buy it's licenses and cals.
if you host it online at cloud like office 365, Lync is bundle with Exchange 2013
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
Hi,
I have configured Webgui for my Local LAN. but I want to access same from some different LAN so for this what i need to do can any one tell me?
i am access my webgui http://<private ip>:8000/sap/bc/gui/sap/its/webgui
Any idea
Thanks
Edited by: manoj nayak on Mar 19, 2010 6:32 AMHi Manoj,
It depends upon situation.
If your both the lan are connected to each other , then you can access with same ip address.
If want to access this URL over internet from different location , then you have to get your internet( public ip address ) nated to your private ip ( local ip ) . once you nated the ip , you will be able to access this url from anywhere of the world using the public ip address.
Thanks
Anil
Edited by: Anil Bhandary on Mar 19, 2010 7:20 AM -
Jabber 9.2, uploading the contact photo from local machine or PC.
is it posssible to upload contact Photo from local machine to jabber from 'edit profile'? I did that but nothing happened! still no contact photo.
Thanks,Hi Shane,
in previous version of Jabber it was not possible, am I right? But I heard in 9.2.0 onwards we can do it.
I will send you the problem on Monday once I get back to Customer Site.
Thanks, -
How to get Date Format from Local Object.
Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web ChannelHi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer. -
Copy file from local host to remote host
Hello,
I need to copy a simple file from local file system , to another computer on the same network.
How should i do that in a simple java program ?
Thanks !Well , I tried that from winXP to winXP on another machine and it worked great :
InputStream in = new FileInputStream(new File("C:\\temp\\myFile.txt"));
OutputStream out = new FileOutputStream(new File("\\\\9.143.85.143\\c$\\tmp\\myFile.txt"));
// Transfer bytes from in to out
byte[] buf = new byte[1024];
int len;
while ((len = in.read(buf)) > 0) {
out.write(buf, 0, len);
in.close();
out.close();
BUT, in order to copy to a linux machine, I tried to put this as the new File :
OutputStream out = new FileOutputStream(new File("\\\\9.143.86.145\\root\\tmp\\myFile.txt"));
and it doesn't work. How should I format the new File path in order to copy to a linux FS ?
Thanks ! -
Copy file from local system to Azure VM using powershell
Hi
Is there a simple powershell command to copy a small file from local computer to Azure VM. Point to Site is not an option for me.
I am hoping for something simple like
Copy-Item C:\Wabash\Logfiles\trasfer.txt -Destination C:\Presentation -ConnectionUri $uri -Credential $credential
similar to Invoke-Command
The only other option i have seen is
http://www.mattwrock.com/blog/copy-files-from-local-computer-to-an-azure-vm
which i fell for my purpose is over kill.Hi,
I will mark Ed's post as answer, if you fount that doesn't give you help, please feel free unmark it and follow up with more information.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
ASA 5505 & VPN Client blocking access to local lan
I have setup a IPSec vpn client connection to a Cisco ASA 5505, when I connect to the unit it fully authenticates and issues me an ip address on the local lan however when I attempt to connect to any service on the local lan the following message is displayed in the log can you help:
Teardown UDP connection 192.168.110.200 53785 192.168.110.21 53 outside:192.168.110.200/53785(LOCAL\username) to inside 192.168.110/53
See the attached file for a sanitised version of the config.This is a sanitised version of the crypto dump, I have changed the user and IP addresses
ASA5505MAN# debug crypto ikev1 7
ASA5505MAN# debug crypto ipsec 7
ASA5505MAN# Jul 24 15:49:03 [IKEv1]IP = x.x.x.x, IKE_DECODE RECEIVED Message (msgid=fbc167de) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jul 24 15:49:03 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, processing hash payload
Jul 24 15:49:03 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, processing notify payload
Jul 24 15:49:03 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, Received keep-alive of type DPD R-U-THERE (seq number 0xa6dcb72)
Jul 24 15:49:03 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0xa6dcb72)
Jul 24 15:49:03 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, constructing blank hash payload
Jul 24 15:49:03 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, constructing qm hash payload
Jul 24 15:49:03 [IKEv1]IP = x.x.x.x, IKE_DECODE SENDING Message (msgid=515fbf7e) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jul 24 15:49:18 [IKEv1]IP = x.x.x.x, IKE_DECODE RECEIVED Message (msgid=2fe7cf10) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jul 24 15:49:18 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, processing hash payload
Jul 24 15:49:18 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, processing notify payload
Jul 24 15:49:18 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, Received keep-alive of type DPD R-U-THERE (seq number 0xa6dcb73)
Jul 24 15:49:18 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0xa6dcb73)
Jul 24 15:49:18 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, constructing blank hash payload
Jul 24 15:49:18 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, constructing qm hash payload
Jul 24 15:49:18 [IKEv1]IP = x.x.x.x, IKE_DECODE SENDING Message (msgid=e450c971) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jul 24 15:49:28 [IKEv1]IP = x.x.x.x, IKE_DECODE RECEIVED Message (msgid=e6c212e7) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jul 24 15:49:28 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, processing hash payload
Jul 24 15:49:28 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, processing notify payload
Jul 24 15:49:28 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, Received keep-alive of type DPD R-U-THERE (seq number 0xa6dcb74)
Jul 24 15:49:28 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, Sending keep-alive of type DPD R-U-THERE-ACK (seq number 0xa6dcb74)
Jul 24 15:49:28 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, constructing blank hash payload
Jul 24 15:49:28 [IKEv1 DEBUG]Group = VPN-Users, Username = username, IP = x.x.x.x, constructing qm hash payload
Jul 24 15:49:28 [IKEv1]IP = x.x.x.x, IKE_DECODE SENDING Message (msgid=af5953c7) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
This is the isakmp dump
ASA5505MAN# show crypto isakmp
IKEv1 SAs:
Active SA: 2
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 2
1 IKE Peer: x.x.x.x
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
2 IKE Peer: x.x.x.x
Type : user Role : responder
Rekey : no State : AM_ACTIVE
There are no IKEv2 SAs
Global IKEv1 Statistics
Active Tunnels: 1
Previous Tunnels: 40
In Octets: 322076
In Packets: 2060
In Drop Packets: 84
In Notifys: 1072
In P2 Exchanges: 35
In P2 Exchange Invalids: 0
In P2 Exchange Rejects: 0
In P2 Sa Delete Requests: 24
Out Octets: 591896
Out Packets: 3481
Out Drop Packets: 0
Out Notifys: 2101
Out P2 Exchanges: 275
Out P2 Exchange Invalids: 0
Out P2 Exchange Rejects: 0
Out P2 Sa Delete Requests: 284
Initiator Tunnels: 231
Initiator Fails: 221
Responder Fails: 76
System Capacity Fails: 0
Auth Fails: 54
Decrypt Fails: 0
Hash Valid Fails: 0
No Sa Fails: 30
Global IKEv2 Statistics
Active Tunnels: 0
Previous Tunnels: 0
In Octets: 0
In Packets: 0
In Drop Packets: 0
In Drop Fragments: 0
In Notifys: 0
In P2 Exchange: 0
In P2 Exchange Invalids: 0
In P2 Exchange Rejects: 0
In IPSEC Delete: 0
In IKE Delete: 0
Out Octets: 0
Out Packets: 0
Out Drop Packets: 0
Out Drop Fragments: 0
Out Notifys: 0
Out P2 Exchange: 0
Out P2 Exchange Invalids: 0
Out P2 Exchange Rejects: 0
Out IPSEC Delete: 0
Out IKE Delete: 0
SAs Locally Initiated: 0
SAs Locally Initiated Failed: 0
SAs Remotely Initiated: 0
SAs Remotely Initiated Failed: 0
System Capacity Failures: 0
Authentication Failures: 0
Decrypt Failures: 0
Hash Failures: 0
Invalid SPI: 0
In Configs: 0
Out Configs: 0
In Configs Rejects: 0
Out Configs Rejects: 0
Previous Tunnels: 0
Previous Tunnels Wraps: 0
In DPD Messages: 0
Out DPD Messages: 0
Out NAT Keepalives: 0
IKE Rekey Locally Initiated: 0
IKE Rekey Remotely Initiated: 0
CHILD Rekey Locally Initiated: 0
CHILD Rekey Remotely Initiated: 0
IKEV2 Call Admission Statistics
Max Active SAs: No Limit
Max In-Negotiation SAs: 12
Cookie Challenge Threshold: Never
Active SAs: 0
In-Negotiation SAs: 0
Incoming Requests: 0
Incoming Requests Accepted: 0
Incoming Requests Rejected: 0
Outgoing Requests: 0
Outgoing Requests Accepted: 0
Outgoing Requests Rejected: 0
Rejected Requests: 0
Rejected Over Max SA limit: 0
Rejected Low Resources: 0
Rejected Reboot In Progress: 0
Cookie Challenges: 0
Cookie Challenges Passed: 0
Cookie Challenges Failed: 0
Global IKEv1 IPSec over TCP Statistics
Embryonic connections: 0
Active connections: 0
Previous connections: 0
Inbound packets: 0
Inbound dropped packets: 0
Outbound packets: 0
Outbound dropped packets: 0
RST packets: 0
Recevied ACK heart-beat packets: 0
Bad headers: 0
Bad trailers: 0
Timer failures: 0
Checksum errors: 0
Internal errors: 0
ASA5505MAN#
and this is the ipsec dump
ASA5505MAN# show crypto ipsec sa
interface: outside
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: x.x.x.x
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.110.200/255.255.255.255/0/0)
current_peer: x.x.x.x, username: username
dynamic allocated peer ip: 192.168.110.200
#pkts encaps: 778, #pkts encrypt: 778, #pkts digest: 778
#pkts decaps: 1959, #pkts decrypt: 1959, #pkts verify: 1959
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 778, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid ICMP Errors rcvd: 0, #Invalid ICMP Errors rcvd: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: x.x.x.x/4500, remote crypto endpt.: x.x.x.x/54599
path mtu 1500, ipsec overhead 82(52), media mtu 1500
PMTU time remaining (sec): 0, DF policy: copy-df
ICMP error validation: disabled, TFC packets: disabled
current outbound spi: 532B60D0
current inbound spi : 472C8AE7
inbound esp sas:
spi: 0x472C8AE7 (1194101479)
transform: esp-aes esp-sha-hmac no compression
in use settings ={RA, Tunnel, NAT-T-Encaps, IKEv1, }
slot: 0, conn_id: 241664, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (sec): 26551
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x532B60D0 (1395351760)
transform: esp-aes esp-sha-hmac no compression
in use settings ={RA, Tunnel, NAT-T-Encaps, IKEv1, }
slot: 0, conn_id: 241664, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (sec): 26551
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Crypto map tag: outside_map0, seq num: 1, local addr: x.x.x.x
access-list outside_cryptomap_1 extended permit ip 192.168.110.0 255.255.255.0 192.168.0.0 255.255.0.0
local ident (addr/mask/prot/port): (192.168.110.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
current_peer: x.x.x.x
#pkts encaps: 39333117, #pkts encrypt: 39333117, #pkts digest: 39333117
#pkts decaps: 24914965, #pkts decrypt: 24914965, #pkts verify: 24914965
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 39333117, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid ICMP Errors rcvd: 0, #Invalid ICMP Errors rcvd: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: x.x.x.x/0, remote crypto endpt.: x.x.x.x/0
path mtu 1500, ipsec overhead 58(36), media mtu 1500
PMTU time remaining (sec): 0, DF policy: copy-df
ICMP error validation: disabled, TFC packets: disabled
current outbound spi: F6943017
current inbound spi : E6CDF924
inbound esp sas:
spi: 0xE6CDF924 (3872258340)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, IKEv1, }
slot: 0, conn_id: 163840, crypto-map: outside_map0
sa timing: remaining key lifetime (kB/sec): (3651601/15931)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0xF6943017 (4136906775)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, IKEv1, }
slot: 0, conn_id: 163840, crypto-map: outside_map0
sa timing: remaining key lifetime (kB/sec): (3561355/15931)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
ASA5505MAN# -
Cisco ASA 5505 VPN help for local lan access.
Hi all,
I am very new to Cisco systems. Recently I was tasked to enable local lan access for one of my server. The problem is this. I have this server with 2 interfaces. One interface to my FTP server(192.168.2.3) and the other to the Cisco ASA(192.168.1.1). Whenever I connect the server to Cisco Anyconnect VPN, I am unable to access the FTP server anymore.
I googled and found out that the problem is because the metric level is 1 for Ciscoanyconnect network interface which causes all traffic to go through the Cisco VPN Interface. Another problem is I can't change the metric of the Cisco VPN Interface as whenever I reconnect to the VPN, the metric resets back to 1 again. I tried to follow some guides to configure split tunnel but my traffic is still going through the VPN connection.
Anyone can tell me what I am missing here? Sorry I am very new to Cisco systems. Spent about 5 days troubleshooting and I feel I am getting it soon. Anyone can guide me what else I am supposed to do?
What I did> Configuration>> Remote access VPN>> Network Client Access>> Group Policies>> Advanced>> Split Tunneling>> Uncheck Inherit and select "Exclude Network List below.>> Uncheck Network List and select Manage, Add 192.168.2.0/24 to permit.
Really appreciate if anyone can tell me what else I can do to ensure my server has access the my FTP Server after connecting to the VPN.
Thanks all!
Wen QiHi,
Try adding the following configuration
policy-map global_policy
class inspection_default
inspect pptp
And then try again.
I'm not 100% would you need to perhaps allow GRE through the firewall even after that. (Protocol 47)
- Jouni
Maybe you are looking for
-
Hi, I recently had trouble with my macbook pro as it use to shut down un expectedly at 40 percent battery, after a while it wouldnt boot up so i rebooted in revovery mode. I ran disk utility and tried to repair my internal HD and it said "can not rep
-
I have A problem as a beginner. I wrote a HTML script in which some Java Applets were included. After compiling the Applets with Java 1.2 the files were uploaded. But the Applets were only shown on those Computers, on which Java was installed, using
-
Height of the containers in split container
Hi, I'm trying to split the container into 3 containers i.e. cont1, cont2, cont3. code is as follows. Could anyone please help me how to set the height for the containers cont1, cont2, cont3. Thanks in advance. DATA: split_cont_ob TYPE REF TO cl_gu
-
HT5312 I dont have a Rescue email address and how i can reset Apple ID security questions
I dont have a Rescue email address and how i can reset Apple ID security questions Regards
-
I want 2 xp users to share one library
My wife and I share a computer and each have a logon under XP. I have our iTunes pointing to my "shared" "my music" folder. I have read several posts and find it hard to believe that every time one user adds a song or disc to their library, the other