Ware house mgt urgent requirement

hi friends
we are implementing ware house for raw materials and we got held up in the midddle.
our process is like this we use to get raw materials in different packs like in 10,20,50,100 kg packs adn storage bin capacity is 600kgs.
my question is as how the capacity check can be done?
guarenteed rewards
kiran

Hi
You can use capacity check based on Maximum weight .ie. 1 while defining the control parameters at Storage type level.
Regards
Ramakrishna

Similar Messages

How to get the document number for a ware house order.

Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advance

There are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material.

Stock transfer between one ware house to another warehouse

hi all,
i moved the the stock within the warehouse(bin to bin).my client requirement is move the stock from one ware house to another warehouse in same plant /storage location. so i need the configuration steps for that.
appreciate your help always,
yours
muthuraman.d

Hi
Hope you are using different storage location for different warehouse within same plant.
Use Movement type 311 - Location to location stock transfer to transfer the material from one warehouse to another ware house.
Make the Auto TO enable at the movement type level so that system will generate the TO automatically when you do the transfer posting. Also possible to confirm the TO autmatically at movement type level.
Hope it helps.
Thanks /Karthik

Ware house

hi all
step no.
1     Assigned one storage loc and wae house no. 001 to plant
2     storage type A to ware house 001
3     storage section A1
4.   Storage bin type - 001
creation of storage bin A11b11 in same section and type and warehouse no. mentioned above...
maintained one material in the storage loc and warehouse no.
created one PO with that material
now at time of GR system is getting dumped....
is there ne other step that i am missing in my case....
i want to maintain my storage location in racks and rows and bins....
help me out.
SAP MM

hi frenchy
my requirement is nt that much...
i just want t maintain around 20000 spares in my store halls( three halls)
which is having so many rows and racks....
i just want that when i do GR then system will ask me for hall and storage bin.....
sap mm

Urgent requirement in schedule line dates

Hi
I have urgent requirement presepective with confirmation quantity.
my delivery date is 20.10.2007 but the availabile quanitity is confirming on 22.10.2007. I need to confirm my quantity on the same date as 20.10.2007.
this is a urgent requirement as my client needs
Tnx
siv

Hi,
If scenario is MTS (make to stock):
If the item is in stock on 20/10/2007 and still the system is generating a confirmation date of 22/10/2007 then for that sales document type may be there is some entry in the "lead time" field. Also may be the item is in stock but it may have been confirmed for some other sales order.
Go to transaction code "VOV8", select the sales document type - double click on it - in the "requested delivery date/pricing date/purchase order date" there is a field for "lead time". If there is any entry here then remove it and save it. Your problem will be solved.
If scenario is MTO (make to order):
If in MMR - MRP2 screen - in "in house manufacturing time" if you have mentioned say 2 days then everytime you create a sales order the system will generate a material availability date 2 days later than the sales order creation date. In this case create the sales order and as soon as the material comes into sales order stock - go to VA02 - run the availability check for that item and confirm it for that day.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil
Message was edited by:
allabaqsh patil

Java Developers Urgently Required-Guildford UK -up to 45,000 per annum

Permanent Java Developer urgently required for a leading pre-press work flow software house.
We need developers with the following skills:
Java J2EE
JSF OR Spring OR Struts
JSP Servlets / Swing
JDBC SQL
JDOM / HTML / JavaScript / CSS / XML / XSL / DTD / XPATH
Desktop: Windows XP
Eclipse3 / CVS
Basic UML
These skills are an advantage.
C++/Perl/AJAX
Parking, excellent working hours and an immediate start available for the right candidate.
Please Contact:
Kelly Riddell
01483 300515
[email protected]

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

Ware house management

Hello friends,
I have client interview on this "WARE HOUSE MANAGEMENT AND LEAN WARE HOUSE MANAGEMENT" . So please help me out by sending good material. Really waiting for good support.
Thanks,
Rams.

from here questions are also asked in the certification exams, so here's a point-wise rant:-
If you have a warehouse with random storage, you need to use the WM System with full functionality. Since a material can be stored in different storage bins or even several storage bins at the same time, precise inventory management at the level of the storage bin is required.
     Lean WM does not have inventory management at the level of the storage bin and is therefore more suitable for fixed bin warehouses. In a fixed bin storage area, the material is always in the same storage bin.
     To print the storage bin in the picking document, you must maintain the respective data in the material master in the view "Storage 1". Maintenance of further warehouse data and the Warehouse Management views is not required.
     Some of the WM functions not included in Lean WM are listed below:
     Storage sections
     Reserve storage bins
     Strategies for putaway and picking
     Replenishment
     Inventory at storage-bin level
This considerably reduces implementation effort.
     For Lean WM you need at least one warehouse number and at least one storage type from which picking takes place and one storage type in which goods are stored (for example, picking storage type as source storage type, shipping zone as destination storage type).
     In the picking storage area, you can have storage bins grouped together from the stock removal viewpoint (for example, to distribute the workload evenly). Picking areas can be defined for each warehouse number and storage type.
     In addition to the picking area, there are other organizational units in the warehouse. These are the staging areas and the doors. They are defined in the outbound delivery or determined by the system and they can also be printed out on the picking documents.
     You can activate Lean WM in Customizing at the warehouse number level.
     You assign a warehouse number to a combination of plant and storage type. In this way, the organizational units in the warehouse are linked up to MM Inventory Management. Also, through this assignment, a status for WM activities is assigned to the respective items in the outbound delivery.

Query on Decentralised Ware house System Sizing

Hi Folks,
I have to measure the disk space requirement for our client production Decentralized warehouse system (Please note this is not extended ware house system which is part of SCM. It comes along with pure ERP -ECC installation).
As per our Warehouse Management functional team we are not sure on how much data we pull from R3 to WM system.
In this case how to do the sizing to determine the disk space for WM system. Please note our R3 System DB size is 3.75 TB.
Kindly provide me your inputs on what based we have to perform sizing on the above explained scenario.
Regards,
Vinod

Hi,
Have you checked the alias /sizing on service marketplace? I hope it can be of help
Br,
Javier

How can i Extraxt the data form Data ware house to BI

Hello Gurus,
Our Requirement is to Extract the data from Data ware house( Informatica, Business objects)
How can i Extract and What r the steps follows
Regards

Hi Lakshmi,
You can use third party tools for extraction data from DW, like PowerCenter for Informatica , BusinessObjects Data Integrator for Business Objects.
To use third-party source systems, you have to create RFC destinations from BW to an RFC server running on the third-party ETL server.
These tools usually work in a similar way. First, they extract data from the source database. Then, the tool stages the data in an intermediate database before loading it to the target system.
Transformations can occur at any point in the data flow, although you will usually want to store an untransformed copy of the data before significantly manipulating it.
Thanks

Lean ware house management screen shots

Hi sd gurus,
now my client is having requirement of lean ware house mgmt ,can any one send me screen shots for configuration process
to my mail id [email protected]

Hi Srini,
Please find the complete notes on Lean Ware House Management System below:
A09 Lean Warehouse Management: Configuration Guide
Purpose
The purpose of this document is to describe the general configuration steps required to manually set up the configuration within the system landscape that has already been installed using the corresponding installation or configuration guides for installation.
The Configuration Guide describes how to set up the configuration of a Building Block manually, without the support of automated configuration tools.
Preparation
1.1     Prerequisites
The following building blocks form the basis for all mySAP All-in-One Automotive, High Tech and Industrial Machinery and Components solutions. You only have to install these building blocks once.
Building Blocks     Comment
Baseline Building Blocks (Layer 0)
J00 - Essential Information
J02 - Organizational Structure
J03 - Financial Accounting
J08 - Controlling
J05 - Materials Management
J04 - Sales and Distribution
Baseline Building Blocks (Layer 1)
J06 - Production Planning and Controlling
J07 Quality Management
J18 - Product Cost Controlling
J19 Batch Management
J20 - Cost Object Controlling Make-to-Order
J21 - Cost Object Controlling Make-to-Stock
J17 - Profitability Analysis
J14 - Human Capital Management
J09 - Travel Management
Industry generic Building Blocks
E04 - Supplement Settings
E05 - Master Data HT / IM&C
Configuration
1.2     Lean WM Basic Settings
1.2.1     Defining Control Parameters and Number Ranges for the Warehouse Number Defining Control Parameters for the Warehouse Number
Use
A warehouse number is an organizational unit in Logistics, which organizes the company from the perspective of Warehouse Management.
In the Warehouse Management System, you can define a variety of control parameters at warehouse number level.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number Define control parameters and number ranges for warehouse no.(double click)
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field.
Table V_T3002
Field name     Value     R/O/C     Description
Whse number     L01     R
Warehouse no. description     Lean WM BP01     R
Weight unit     KG     R
Volume unit
Default UoM     K     R
Time unit/performance data
Lean WM active     X     R
Link to subsystem active
Performance data
Transfer order     01     R
Group number     01     R
1.2.2     Defining Storage Type
Use
A warehouse number is subdivided into a variety of storage types. A storage type is defined by its physical or organizational features (for example, high rack storage area, bulk storage, and goods receipt areas).
A storage type has a short description rather than an address.
Before you can implement Lean WM, you must configure the following settings:
1.     Assign a (newly defined) storage location to a warehouse number.(This step is defined by step 3.12 Control Plant / Storage Location / Warehouse Number Assignment
2.     You should set up at least three storage types:
     a storage type (that will be used as a source storage type) with one or several fixed storage bins
     a goods issue area (as destination storage type) for deliveries
     an interim storage area for differences
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Storage type
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3012
Data record 1:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     001
Storage type name     Fixed bin storage
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
Data record 2:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     916
Storage type name     Shipping area deliveries
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
Data record 3:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     999
Storage type name     Differences
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
Data record 4:
Field name     Value     Sub-screen
Whse number     L01
Warehouse no. description     Lean WM BP01
Storage type     902
Storage type name     IN-ZONE
Stock plcmt requires confirmation          for putaway control
Unit of measure type srch
Stock rmvl requires confirmation          for picking control
Unit of measure type srch
1.2.3     Defining Doors
Use
In a WM-managed warehouse, you can define dock doors (also known as doors or gates). A door is a location where the goods either arrive in the warehouse or leave it.
You can assign different functions to a dock door, for example:
Goods receipt
Goods issue
Other transactions such as cross-docking and flow-through
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM Define Doors
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T30B
Field name     Value     R/O/C     Description
Whse no.     L01     R     Warehouse number
Door     A01     R     Door for warehouse number
Text for door     Door A01     R     Text for door
Staging area
Matl stag. area txt
GI indic.     X     R     Goods issue indicator
GR ind     X     R     Goods receipt indicator
CD ind               Cross-docking indicator
FT ind               Flow-through indicator
1.2.4     Defining Material Staging Areas
Use
A staging area is an interim storage area for goods that have been received from goods receipt and afterwards need to be transferred into the warehouse.
It is also an interim storage area for goods that were picked in a warehouse and are to be loaded for goods issue through loading ramps or doors.
You can assign different functions to a staging area:
     Goods issue
     Goods receipt
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Material Staging Area
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T30C
Field name     Value     R/O/C     Description
Whse no.     L01     R
Staging area     A01-01     R
Matl stag. area txt     Zone 1     R
Door     A01     R     Door for warehouse number
Text for door     Door A01     R
GI ind     X     R     Goods issue indicator
GR ind     X     R     Goods receipt indicator
CD ind               Cross-docking indicator
FT ind               Flow-through indicator
HU ind               Handling unit indicator
1.2.5     Defining Picking Area
Use
A picking area is an object within a storage type that groups together storage bins for purposes of stock removal.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM Define Picking Area
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T30A2
Data record 1:
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
STy (storage type)      001     R
PAr (Picking area)     001     R
Picking area name     Picking area 1     R
Data record 2:
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
STy (storage type)      001     R
PAr (Picking area)     002     R
Picking area name     Picking area 2     R
1.2.6     Defining Transfer Type
Use
In Lean WM, the transfer type "A" (stock removal) is required for movement type control.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Transfer Type
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T333A2
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
Transfer type     A     R
Text f. shipment type     Pick     R
1.2.7     Defining Movement Types
Use
The SAP R/3 System uses movement type to process movements in Inventory Management (for example, goods receipt for a purchase order or goods issue to a cost center). When the system recognizes a movement as being relevant for Warehouse Management, it assigns this movement to a WM movement type by means of a table.
The movement type for the Warehouse Management System provides the information required for stock removals or picking:
     Interim storage bin
     Fixed bin coordinate
     Control indicator for processing, confirming, and printing transfer orders
     Confirmation info
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Movement Type
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3332
Data record 1:
Field name     Value     R/O/C     Description
Warehouse number     L01     R
Warehouse no. description     Lean WM     R
Movement type     255     R
Movement type description     Goods Issue general     R
Src     001     R
Src Stor. Bin
Dest     916     R
Dest Stor. Bin
Transfer type     A     R
Text for transfer type TRATX     Pick     R
TO creation screen     2     R
Scr. TO confirmation     2     R
Manual TO creation not allowed
Transfer priority
Print code
TO item can be confirmed immed.
Propose confirmation
Data record 2:
Field name     Value     R/O/C     Description
Warehouse number     L01     R
Warehouse no. description     Lean WM     R
Movement type     601     R
Movement type description     Picking by delivery note     R
Src     001     R
Src Stor. bin
Dest     916     R
Dest Stor. bin
Transfer type     A     R
Text for transfer type TRATX     Pick     R
TO creation screen     2     R
Scr. TO confirmation     2     R
Manual TO creation not allowed     X     R
Transfer priority
Print code     02     R
TO item can be confirmed immed.     X     R
Propose confirmation
1.2.8     Defining Difference Indicator
Use
Using the difference indicator, you can classify your differences. This indicator is used in Lean WM for evaluation purposes only.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Difference Indicator
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3362
Field name     Value     R/O/C     Description
WhN     L01     R     Warehouse number
DiffInd (difference indicator)     X     R
Description of difference indicator     Stock difference     R
Stor.ty.differences     999     R
Diff.bin
TO     X     R
Source bin
1.2.9     Control Plant / Storage Location / Warehouse Number Assignment
1.2.9.1     Assigning Warehouse No. to Plant-Storage Locations
Use
By doing so, system can recognize which storage locations in Materials Management are controlled by the Warehouse Management system (LE-WM); you must assign the plants and the storage location to the warehouse number.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMGEnterprise Structure Assignment  Logistic Execution  Assign warehouse No. To plant/storage Location
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T320
Field name     Value     R/O/C     Description
Plant     BP01     R
SLoc     0005     R
WhN     L01     R
1.2.9.2     Control Plant / Storage Location / Warehouse Number Assignment
Use
You can control for each combination of plant, storage location, and warehouse number whether Lean WM or standard management of bin inventory is to be selected.
If you are using Lean WM, you can also specify a picking storage type that is used for creating transfer orders.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Control Plant / Storage Location / Warehouse Number Assignment
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_T3202
Field name     Value     R/O/C     Description
Plnt     BP01     R
Stor. loc.     0005     R
WhNo (Whse number)     L01     R
Degree of activation Warehouse Mgmt     1     R
Stor.type for picking in Lean WM     001     R
1.2.10
1.2.11     Assigning Picking Location
Use
Assign the picking locations to the combinations of shipping point and storage condition for every plant.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Determine Picking Location  Assign Picking Location
Transaction Code     SM30
2.     Find the Field Name and input the relative value into the field
Table V_TVKOL
Field name     Value     Description
ShPt     BP01     Plant
Plnt     BP01     Shipping point/receiving pt
SC     K1     Storage conditions
SLoc     0005     Storage location
1.3     Print Control for Warehouse
Use
Print control defines the following:
     Which slips are to be printed for the movements (that is, for the transfer orders) within the Warehouse Management System
     How these slips are to be printed (that is, which forms are to be used, how many copies are to be printed)
     On which printer a slip is to be printed automatically
And print control manages the print operations of the warehouse. This flexibility involves a certain degree of complexity with regard to the parameterization.
Procedure
1.     Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define Print control
Transaction Code     OMLV
2.     Choose the following button and check the contents
(Here only the contents of the warehouse no. L01 are listed):
2.1     Spool code
Data Record 1
Field name     Value     R/O/C     Description
WhN     L01          R     Warehouse number
Spool     01     R     Spool request name
Copies     1          R     Number of copies
Title     LVS1     R     Spool control data
Print_immed.     X     R     Print immediately
Delete_after_print     X     R     Release after output
NewSplReq__               New spool request
Data Record 2
Field name     Value     R/O/C     Description
WhN     L01          R     Warehouse number
Spool     02     R     Spool request name
Copies     1          R     Number of copies
Title     LVS2     R     Spool control data
Print_immed.               Print immediately
Delete_after_print     X     R     Release after output
NewSplReq__               New spool request
2.2 sort profile/collective process
Field name     Rec1     Rec2     Rec3     Rec4     Rec5     Rec6     Rec7     Rec8     Rec9
WhNo_(Whse_number)     L01     L01     L01     L01     L01     L01     L01     L01     L01
Sort_profile     1     2     3     4     5     6     7     8     9
1st_sort_criterion     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI     SPOOI
Sort_descending_order (1st_sort_criter.)
Control_break_1st_sort_criterion
2nd_sort_criterion     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI     LDESI
Sortdescending_order (2nd_sort_crit.)
Control_break_2nd_sort_criterion                                             X
3rd_sort_criterion     REFNR     REFNR     REFNR     REFNR     FORMI     FORMI     FORMI     FORMI     REFNR
Sortdescending_order (3rd_sort_crit.)
Control_break_3rd_sort_criterion     X     X     X     X
4th_sort_criterion     FORMI     FORMI     FORMI     FORMI     LGNUM     LGNUM     LGNUM     LGNUM     FORMI
Sortdescending_order (4th_sort_crit.)
Control_break_4th_sort_criterion                         X     X     X     X
5th_sort_criterion     LGNUM     LGNUM     LGNUM     LGNUM     VLTYP     VLTYP     VLTYP     VLTYP     LGNUM
Sortdescending_order (5th_sort_crit.)
Control_break_5th_sort_criterion
6th_sort_criterion     VLTYP     NLTYP     VLTYP     TANUM     VLPLA     NLPLA     WERKS     TAPOS     NLTYP
Sortdescending_order (6th_sort_crit.)
Control_break_6th_sort_criterion          X     X     X                         X
7th_sort_criterion     VLPLA     NLPLA     WERKS     TAPOS
     TANUM     TANUM     LGORT          KOBER
Sortdescending_order_ (7th_sort_crit.)
Control_break_7th_sort_criterion                         X
8th_sort_criterion     TANUM     TANUM     LGORT          TAPOS     TAPOS     MATNR          VLPLA
Sortdescending_order (8th_sort_crit.)
Control_break_8th_sort_criterion
9th_sort_criterion     TAPOS     TAPOS     MATNR                    CHARG          TANUM
Sortdescending_order (9th_sort_crit.)
Control_break_9th_sort_criterion
10th_sort_criterion               CHARG                    BESTQ
          TAPOS
Sortdescending_order_ (10th_sort_crit.)
Control_break_10th_sort_criterion
11th_sort_criterion               BESTQ                    SOBKZ
Sortdescending_order_ (11th_sort_crit.)
Control_break_11th_sort_criterion
12th_sort_criterion               SOBKZ                    LSONR
Sortdescending_order_ (12th_sort_crit.)
Control_break_12th_sort_criterion
13th_sort_criterion               LSONR                    VLTYP
Sortdescending_order_ (13th_sort_crit.)
Control_break_13th_sort_criterion
14th_sort_criterion               VLTYP
Sortdescending_order_ (14th_sort_crit.)
Control_break_14th_sort_criterion
15th_sort_criterion
Sortdescending_order_ (15th_sort_crit.)
Control_break_15th_sort_criterion
2.3 print code
Field name     Rec1     Rec2     Rec3     Rec4     Rec5     Rec6     Rec7
WNo___(Warehouse_number)     L01     L01     L01     L01     L01     L01     L01
PrCd__(Print_code)     01     02     03     11     12     21     22
Print_code_description
Find_shipping_data____
Determine_production_data_
Form_     LVSTAEINZEL     LVSTALISTE     LVSTOSOLO     LVSTAEINZEL     LVSTALISTE     LVSKOMMIL1
     LVSKOMMIL2
PTm_(Time_of_printing)________
Sort_profile     1     1          1     4     1     1
Combined_print          x               x     x     x
Spool_data     02     02     01     02     02     02     02
Label_form               LVSLABELS
Label_spool_code               01
Quantity_of_labels_(Indicator)               2
2.4 assign printer to storage type (LP01 to 001 only)
Field name     Rec1     Rec2     Rec3
WhNo_(Whse_number)     L01     L01     L01
STy__(storage_type)     001     916     999
Storage_type_description     Fixed bin storage     Shipping area deliveries     Differences
Printer
2.5 assign print code to movement type
Field name     Rec1     Rec2     Rec3
WhNo_(Whse_number)     L01     L01     L01
MvT__(WM_movement_type)     101     255     601
Movement_type_description     Goods receipt for pur.or.
          Picking by delivery note
PrCd__(Print_code)     01          02
2.6 assign print report to warehouse No.
Field name     Rec1
WhNo_(Whse_number)     L01
Warehouse_number_descrip.     Lean WM Plant BP01
Print_report     RLVSDR40
2.7 print control multi-processing
Field name     Rec1
WhN     L01
Ref.ty.     L
Status     2
Print_prog.     RLKOMM40
PrCd     21
Printer     LP01
1.4     Manual Activity
1.4.1     Maintaining Number Range Intervals for Transfer Order
Use
Maintain number range intervals for transfer order
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM  Define control parameters and number ranges for the warehouse number  Maintain number range intervals for transfer orders (double click)
Transaction Code     LN02
Check if the internal number range 01 (0000000001-1000000000) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
1.4.2     Maintaining Number Range Intervals for Reference Numbers
Use
Reference number range has the following meanings:
This number identifies a number range to be used for the assignment of sequential numbers for WM reference numbers. Reference numbers are used to create or print a group of transfer orders at one time.
A sequential number generated by the system for the purpose of multiple processing of transfer requirements and delivery notes.
The reference number can also be used to print the resulting transfer orders at a later time.
Procedure
In this step, you define that, the Number range for Transfer order as 01 and Group number as 01, now you should tell the system how the number range would like for 01 as transfer order and 01 for the group number, for both number range, you may define you own number range, the following information just for reference:
Access the activity using one of the following navigation options:
IMG Menu     IMG  Logistic Execution  Shipping  Picking  Lean WM Define control parameters and number ranges for the warehouse number  Maintain number range intervals for Reference Numbers( double click)
Transaction Code     LN06
Check if the internal number range 01 (5000000000 - 5999999999) has been defined
Once you have defined your number ranges, it is extremely difficult to change them afterwards when the objects concerned are filled with data.
Bear in mind that you will be entering data on a long-term basis. Create your number range intervals accordingly.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Ware House Management Uses

Hi,
Plz tell me uses about Ware House Management .

1.Enables granular traceability and control
2. Ability to synchronize the system and material flow
3. Simple-to-complex placement and removal strategies
4. Assignment of inbound orders to outbound deliveries
5. Allocation of storage bins
6. Processing of all stock movements valid for WM like Receipts, issues, transfers
7. Utilizes stock placement and removal strategies e.g. Next empty bin, addition to stock, FIFO, LG/SM qtys.
8. Handle Special handling requirements (labeling, packaging)
9. Implementing with RFID one can achieve 99.99% stock accuracy
Hope this will help you
Enjoyyyyyy
Akshit

Urgent requirment on PAYMENT Program

Hi,
I have a very Urgent requirement about Payments to customer using Payment program, I need to pay to customer for a over payment (he initially paid on invoice) now I need to pay back that type of customers, How it is done in Sap, if that can be done in using f110, if yes how it will differentiate the over payment-open item (here I dont want to pay credit notes automatically)
And one more question is if I need to list all the over payments in a forms and get it approved/ validated and trigger the payment run
Please throw some light on it is really urgent
Thanks
Sireesha

Hi Sireesha
Just enter the customer number(s) in the parameters of the payment program (F110). You can further define other selections such as document number(s) in the "Free Selections" tab.
You are able to include/exclude documents in the payment proposal log by blocking/unblocking individual lines (normal F110 functionality).
Kylie

Order Data Ware House SD report?

Hi all kindly give a solution for this scenario
If there are no quantity on the request, it will not show a u201C0u201D order quantity there u2013 it will show the first promise quantity by its side and show the promised quantity there. Please change your query as per that and do not put the schedule lines as it is from order table. There will not be any row with 0 quantities.
Explaining the case which you asked u2013 1 piece requested on 11-Dec and promised on 12-Dec will appear as below
Request Date    Promise Date    Order Qty
11-Dec              12-Dec              1
Once invoicing happens, invoice quantity will drive the query.
Just take an example - 3 pieces requested on 11-Dec, all the 3 promised on 12-Dec, only one was invoiced on 12-Dec. As on 12-DEC, it will appear as below:-
Request Date    Promise Date    Invoice Number    Billing Date Order Qty
11-Dec              12-Dec              ABC                   12-Dec            1
11-Dec              12-Dec                                                              2
If the rest of the 2 were billed on 15th Dec, it will appear as below on 15th Dec
Request Date    Promise Date    Invoice Number    Billing Date Order Qty
11-Dec              12-Dec              ABC                   12-Dec            1
11-Dec              12-Dec              DEF                     5-Dec 2

Yes all jobs are running and cubes are also processed.I have two server 1)Dataware house server containing sql database 2)Service manager console .
I didn't connect operation manager server but i created one incident manually from "service manager console ">work items .So it should show in the data ware house incident report .

Urgent requirement please help

hi everybody iam new to this webdynpro
i got an urgent requirement to build a prototype for the following requirement. my application has 9 scenarios idid first two and i stuck up at the 3rd scenario. From the 3rd scenario 2 sub scenarios im posting. please guide me as it is most urgent. if any body has time and patience i could send the requiment to their mailids
Thanks in advance
khaja
3.     The application window has five areas.
a.     Screens
b.     Data Object
c.     Source Object
d.     Mapping of Screen and Data Object
e.     Mapping of Data Object and Source Object
4.     In the Screen area,
a.     There is a list at the left side shows all the   screens used in the application.
b.     There is graphic on the right side shows screen flow of the whole application
c.     There is screen detail on the right side can be switched from the screen flow graphic. The screen detail reflect the screen selected at the left side, it shows
i.     A box with the label of the Screen name
ii.     Multi lines show the fields displayed on screen
iii.     Each field has a indicator of being able to input
iv.     Multi button in order shows commands in this screen
v.     Each button has event name
vi.     Each button has a pointer point to next screen this command trigger
5.     In the Data object area,
a.     There is a tree structure at the left side shows all the Data Objects in the application.
b.     There is graphic on the right side shows the detail structure of the data object selected on the left side. The detail structure shows
i.     A box with the label of the Data Object name
ii.     Multi lines show the Data Object fields
iii.     Multi points show the sub-object relationship
iv.     Multi links show the foreign fields relationship

Hi,
One more question.
Do you want to display all the Object areas at a time
There are 5 areas right. How do you want to nagivate ?
Please explain ...some how from the usecase
document i can't makeout the exact requirement how
your are expecting the UI .
Regards, Anilkumar

SAP Report painter,SAP Open Information ware house

Hi,
I want to know,r there any other tools to fecilitate devlopment of reports other than these.how to use these tools SAP Report painter and SAP Open Information ware house.
Thank u.
Vishnu.

Hi Jasminika ,
Could you please share with me those tables names where report items and hierarchy are saved
Regards
Neeraj

Ware house mgt urgent requirement

Similar Messages

Maybe you are looking for