Warning "Source selection for is incompatible for target selection" in RRI
Hi Friends,
I am getting the following warning message while jumping from one query to another(RRI) :
Source selection for is incompatible for target selection
I have also found one SAP Note : Note 1265027 - Incompatible selection for a variable in the target query which states that it is a program error and we have to Import Support Package 04 for SAP NetWeaver BI 7. 01 (SAPKW70104) into your BI system for SAP NW BI 7.0 Enhancement Package 1.
But the problem is we are already in Support Package 04 .After that also we are facing the same problem.
Can anyone please let me know how to fix this issue?Is anyone faced such an issue.
Thanks in advance.
Regards,
Debjani..
check if the correction instruction given in the note is present in your system.
Similar Messages
-
Alternative for VRF Source Select
We have "VRF Source Select" configuration alternative to Policy based Route-map in the Router Interfaces .Can anyone tell me if we have any alternative for "VRF Soure Select" . Unfortunately Cisco 7200 VXR NPE-G1 Routers doesn't this feature at all. NPE-G1 supports only VRF Forwading and VRF Site-maps!!!
Regards
SrikantI can't think of an alternative but 12.0(28)S, which is planned to be on CCO at the end of April, will support the NPE-G1. This should solve the issue.
Hope this helps, -
Custom code for Target Source Reconciliation from a flat file
Hi Experts,
I need help in writing a custom code for Target Source Reconciliation from a flat file to OIM. The flat file will contain account details for different application instances. I am working on 11gr2.
Thanks,
SubinAll right, all right, not so quickly.
I am at the stage of trying to put one dimension
array. But I stuck in one place, this is the program:
import java.io.*;
public class FromFile {
public static void main(String[] args) throws IOException {
File inputFile = new File("mac.txt");
FileReader in = new FileReader(inputFile);
int c;
for(int i = 0; i < 10; i++) {
c = in.read();
System.out.println(c);
and I try to read: 1 2 3 4 from text file
This is the result so far...
49
32
50
32
51
32
52
-1
-1
-1
well,
I think I know what's wrong. I must change ASCII numbers into
ints. But I dont' know how to do it. Some nice book, or
tutorial on streams would come in handy. Could you correct
it?. -
How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor
Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Pauli get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First : 0x4001c001
DLL Last : 0x41c7c0d8
Physical First : 0x84001000
Physical Last : 0x863bbdec
Num Modules : 294
RAM Start : 0x863c0000
RAM Free : 0x863d5000
RAM End : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 116
Kernel Flags : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18 0x9 0x25 0x0 0x0 0x0
Row 1: 0x26 0xd 0x28 0x0 0x0 0x0
Row 2: 0x27 0x24 0x23 0x0 0x0 0x0
Row 3: 0x0 0x0 0x0 0x0 0x0 0x0
Row 4: 0x0 0x0 0x0 0x0 0x0
Row 5: 0x0 0x0 0x0 0x0 0x0 0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
Height = 0x280
Width = 0x1e0
HSW = 0x20
HFP = 0x8
HBP = 0x17
VSW = 0x1
VFP = 0x4
VBP = 0x3
DVI is not enabled
PixelClkDiv = 0x7
LogClkDiv = 0x1
ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed. -
Currency Translation in Planning sequence with variable for target currency
Hello ,
i have a requirement, the cube contains multiple data in the Group Currency for multiple company codes. & I want to convert these amounts to another KF as local currency using planning sequence only (not using transformation, as the users want to do this when they require.)
For this, i defined a Aggr level , filter & Planning function with Currency translation selecting the source field as AMOUNT_GC & target field as AMOUNT_LC using the Currency Translation type ZCTGCLC.
The target currency is not know beforehand, as it depends on the company code of each records that comes in.
Hence, Currency translation type uses a Customer exit variable 'Z_R_0026' for target currency.
This is customer exit variable which searches the Master data table of the Company code & replies back with the local currency of that particular company code (derived value from the company code variable also in teh filter).
However, when i execute this planning sequence, it gives me an error saying, "no value found for variable 'Z_R_0026'
1. when edit the CMOD code, to return only say "EUR" the planning sequence runs fine.However when i use this select statement to fetch the corresponding value of the currency using the company code reference from the company code master data table, it gives the above error. it seems to be a problem with the select statement.
below is the code for that exit
when 'Z_R_0026'.
data: l_curr type /BI0/OICURRENCY.
IF i_step = 2.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam = 'Z_S_0003'. " Company Code Single
CLEAR l_s_range.
Filling Currency Key from Company Code
select single currency
from /bi0/pcomp_code
into l_curr
where comp_code = loc_var_range-low
and objvers = 'A'.
if sy-subrc = 0.
l_s_range-low = l_curr.
else.
l_s_range-low = 'ABC'.
endif.
l_s_range-opt = 'EQ'.
l_s_range-sign = 'I'.
APPEND l_s_range TO e_t_range.
clear l_s_range.
EXIT.
ENDLOOP.
ENDIF.
2. there is a option of using infoobject for target currency in the RSCUR itself, however, when i try to input the 0COMP_CODE for finding the attribute currency from this infoobject, it doesnt accept.
has anyone tried this earlier ?
Any help/suggestions , guys, pls?
Thanks
JohnHi Praveen ,
Thanks for that.
I have a Question.
If RSCUR were to only accept a Date InfoObject , it would be placed under a differnt heading.
The Tab is "Currrency" & the sub-Tab is "Target Currency"
so i guess, it should accept other infoObjects as well.
Moreover, the help on that InfoObject buttons says
"Specification of an InfoObject (Characteristic) in which a currency
attribute is stored in InfoObject maintenance. At runtime, the
associated currency attribute is determined using the characteristic
value and this is interpreted as source or target currency."
& i have already defined 0currency as a attribute of 0comp_code. so this should work ideally.
almost similiar CMOD code i have used for other too, but i dont know why only this one is getting struck.
any help, pls.
Thanks
John
Edited by: John Lewis on Apr 17, 2009 3:24 PM
Edited by: John Lewis on Apr 17, 2009 3:25 PM -
Source System for Program RSIMPCURR
Hello,
I am using RSIMPCURR program for currency translation in my process chain.It was working fine in D but when I transport this to Q it's not working because the variant I am using for this is still using source system in for Dev. I need to change the source system for the Q system, Anyone knows how to change?
Also, I was trying to create variant manually in Q for the same program but it won't allow me to select source system. The Source system field is grayed out.
I appreciate anyone's help.
Thanks,
PejaHello,
You must create a variant for Program RSIMPCURR without specify the source system name and transport it.
After the transport, in the target destination, do RSA1 / Source systems / right click and choose transfer exchange rates. The Source system is already filled with the good value. You only have to complete the screen with the same attributes that you entered in the transported variant and save it with the same name.
Just do these operations in every BW target environments (Quality, Production,...)
I hope this will help you
David -
Source selection derived from target field Cons Chart of Accts is empty
Dear,
When I run the LDS, The system issues this error message :
"Source selection derived from target field Cons Chart of Accts is empty"
Although, mapping of Cons Chart of Accts in LDS for this method is defined as constant value.
I can't load data from raw data cube. What can be the reason ?
Thanks,Source selection derived from target field Cons Chart of Accts is empty
Message no. UCT8257
Diagnosis
The system derives the source selection from the selection for target field Cons Chart of Accts. The resulting source selection is empty.
System Response
The system cannot read any source data.
Procedure
Examine the mapping rule for field Cons Chart of Accts. Make sure that the inversion of the mapping rule does not produce an empty selection or lead to conflicting values. -
Need sample source code for calling stored procedure in Oracle
Hi.
I try to call stored procedure in oracle using JCA JDBC.
Anybody have sample source code for that ?
Regards, Arnold.Thank you very much for a very quick reply. It worked, but I have an extended problem for which I would like to have a solution. Thank you very much in advance for your help. The problem is described below.
I have the Procedure defined as below in the SFCS1 package body
Procedure Company_Selection(O_Cursor IN OUT T_Cursor)
BEGIN
Open O_Cursor FOR
SELECT CompanyId, CompanyName
FROM Company
WHERE CompanyProvince IN ('AL','AK');
END Company_Selection;
In the Oracle Forms, I have a datablock based on the above stored procedure. When I execute the form and from the menu if I click on Execute Query the data block gets filled up with data (The datablock is configured to display 10 items as a tabular form).
At this point in time, I want to automate the process of displaying the data, hence I created a button and from there I want to call this stored procedure. So, in the button trigger I have the following statements
DECLARE
A SFCS1.T_Cursor;
BEGIN
SFCS1.Company_Selection(A);
go_Block ('Block36');
The cursor goes to the corresponding block, but does not display any data. Can you tell me how to get the data displayed. In the future versions, I'm planning to put variables in the WHERE clause. -
Error while compiling BerkeleyDB: Command failed for target `util_sig.lo'
Hi,
While trying to compile BerkeleyDB on Solaris 10 x86 ( is there an easier way to get BerkeleyDB running than compiling from source? ) I was confronted with the error message appended.
I used Berkeley 4.4.20 and configured by executing
PATH=/usr/ccs/bin:${PATH} # for ar
cd build_unix
CC=gcc ../dist/configure
Here the error message:
UNIX /app/berkeleydb/db/4.4.20/build_unix
$ make
/usr/bin/sh ./libtool --mode=compile gcc -c -I. -I../dist/.. -D_REENTRANT -O2 ../common/util_sig.c
gcc -c -I. -I../dist/.. -D_REENTRANT -O2 ../common/util_sig.c -fPIC -DPIC -o .libs/util_sig.o
In file included from /usr/include/sys/signal.h:34,
from /usr/include/signal.h:26,
from ../common/util_sig.c:15:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/signal.h:26,
from ../common/util_sig.c:15:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../common/util_sig.c:15:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `util_sig.lo'
Thanks, Dietrich
PS:
I need the LDAP server for playing with a JAAS LDAP login module and something minimal would be enough. Is there something easier to install than OpenLDAP?I fail to understand why you're taking all this trouble. Both the Berkeley DB as OpenLDAP are both shipped with Solaris 10/x86 natively. Look into the so called companion cd / dvd. That makes setting all of this up a piece of cake.
Another option could be looking into Blastwave or Sun Freeware. -
Endpoint Protection error: The source folder for content does not exist.
I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:47 AM 5920 (0x1720) -
Invalid Path for target file, check if connector is deployed correctly
Hi all,
I've got a tricky problem over here: we are using OMB scripts for generating simple extract mappings that just copy data from an oracle source table to a flat file on a directory. Up untill now ( with version 11.1 ) this did not pose any troubles, but now we are using 11.2 for the first time and we don't get the mappings to execute. Generating, validating and deploying all works fine, only executing fails with the error: "Invalid Path for target file, check if connector is deployed correctly". It ends to rapidly, so I'm assuming the problem lies in the repository and not on the database itself.
I'm pretty sure all locations are defined as needed, flat file operator in the mapping has correct location, the flat file module has the same location,...
I tried almost everything: recreate oracle module, recreate flat file module, unregister and recreate db location, unregister and recreate dir location, recreate mapping and flat file, export/import...
The strange thing is, I was able to execute a mapping once. Although it ended with an error (due to a function in the mapping), it created the file correctly. After that I needed to update the directory path of the target location and from then on, I always got the error above, and I don't see a good reason.
Any suggestions??
Tnx,
MichelThat error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David -
GC Warning: Insufficient space for /proc read
Hello,
I have a shared library that uses gcj functionality.
I'm getting the following warning message:
"GC Warning: Insufficient space for /proc read"
In a call to JvAttachCurrentThread() inside the shared library.
And latter my library crash with 'Segmentation fault' when I try to use a java functionality.
The warning message and the 'Segmentation fault' are not at the same time and may be a coincidence.
I could not reproduce the error in a small "Hello World" program, so I think it has some thing to do with my application.
But this only happens in solaris, when I compile and run my application in Linux, it does not happen.
Scenario that works:
Linux
Application compiled with gcc-3.3.3
Shared library compiled with gcc-3.3.3
Scenario that does not work:
Solaris 8
Application compiled with Forte/SunCC 8
Shared library compiled with gcc-3.3.3
Only the shared library uses gcj functionality, the application is only C++.
What is this warning message about ?
LuisI'm seeking recommendations for the actual size of a scratch disk. I've been searching over 100 posts before finding the information I was looking for here! Great. Patience is a virtue after all.
On this post it says an hour of video makes about a 13.5 BG files SO -- would that be a good size for the scratch disk, more of less, 'cause I want to make a 45-minute edited video.
One post indicated it might be a good idea to have a sequence of scratch disk, i.e. to set of maybe one scratch disk at 20GBs and then another at 20 GBs, etc. rather than have one big 200GB scratch disk?
Any information or ideas helpful. I've been upgrade hardware and software and ready to finally dive in to all this cool stuff. (Note: The manual had no actual size recommendation, but I'm gonna check out other online sources right now). Thanks. -
Source tables for forms and tabular forms must have a primary key.
Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - ChristianChristian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc -
Debuging mapping - error : Could not find test data for target operators ?
Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help. -
Source List for Material Group
Hi All,
How do I maintain a source list for a material group.? Since ME01 requires a material, I cannot create source list in this tranasction.
The client want a the Source (for material Group) to be assigned automatically in PR assignment step.
Again, within a material group there can be several infor records, For example:
Mater Group: Office Supp.....I can have two infor rec for the same vendor....one with "Short Text" Notepad and another info rec with "Short Text": Paperclips. Or the second info record could be a different vendor also.
How could the system know which one to assign as a source since it's the same material group (one for Notepads and the other for paperclips)??
Thanks in advanceHi duke,
In SAP we have a choice of creating source list for a "Material Group ". Following is the method.
You may have the outline agreements related to material group rather than a single specific material - For ex. outline agreement with a item category M( Material unknown) or W ( material group).In doing so you can decide whether to exclude or include certain materials of the relevant material group by means of the source list.
To create the source list for a material group proceed as follows.
1) On the outline agreement overview screen, select the items for which you wish to enter the source list record & choose Item --> Maintain source list
2) To exclude the particular material keep the "Exclusion" indicator set against a material with a validity period.
I hope this will be useful to you.
Vivek
Maybe you are looking for
-
Sending Notification to a User (common box) without attaching an employee..
Dear all, I expect all of yours help on this doubt. I have created custom notification using wf_notification.send based on my logic, now I want to send these notification to common inbox in the Oracle. For this purpose i have created a user and attac
-
How to set multiple categories in Business graphics
Hi Experts, I want to display column chart in using Business graphics UI element. My requirement is that I need to display sets of 5 series in 4 categories. I could able to create only one category and i am not getting option to create ot
-
No Compiling Error but doesn't work NEW
import java.awt.*; import java.awt.geom.*; import java.awt.event.*; import java.applet.*; public class javacw extends Applet implements KeyListener, Runnable Area pandaArea; Graphics2D g2d; // Providing coordinate control for the Panda
-
System.ArgumentNullException: Value cannot be null.
We have an application that utilizes the WCF-OracleDB adapter on a send port connecting to an Oracle database. The application sends insert statements to a stored procedure that inserts the data into one of the tables. The table has a column for City
-
Catching Alt Key Press with the Key Down Filter Event
I am writing an application that requires specific key combinations using ctrl, shift, and alt in addition to a function key (F1, F2, F3, etc). The application works great except for when I try to catch an alt key press. The alt key press does not