Warning: stupid user question ipad 3 (new)
on ipad can reminders be "seen" in calendar view like they can on mac book air?
thanks,
No. In iOS, Reminders and Calendar are separate apps (and they will be in the upcoming new release of OS X, Mountain Lion, as well).
As a new iPad owner, you might find the iPad User's Guide helpful:
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Regards.
Similar Messages
-
Old user, questions for new forums
the last time that i needed to DL extensions was right after
the macromedia/adobe merger. being a longtime dreamweaver user, i
was very familiar with the exchange and had no problem with it
except that i was a bit slow to browse through. and, also, being a
longtime photoshop user, i was familiar with the adobe
support/downloads/forums etc. as well.
i have a new computer and am now using dw 8 and am looking
for some dw extensions. the exchange no longer lists information
about the software compatibility of the extensions. so i came to
the forum to look for information. the dw general forum lists
119814 topics, and yet i can only access 2 pages (40 topic).
my next step was to seek out a _forum_ forum. the closest
thing i found, linked from
http://www.adobe.com/support/forums/index.html
(which also links to this forum) was under general/forum
comments. i discovered that it required a different log-in
procedure, requiring a first/last name for user, instead of the
email address that this forum requires. well, this turns out to be
defined as a "user to user" forum and
restricted to only that. for example, the faq had a question
regarding downloads (i'm thinking maybe i'll find a link to a
better-functioning dw exchange). but the answer to this
"faq" was "there are no
downloads in the user to user forum".
i want to be able to get dw extensions and to locate a forum
that addresses this activity. i also want to locate a forum that
discusses the functionality of the support forums in general.
and, possibly, most importantly, i want to be able to access
more than just the 40 most recent postings in a forum that claims
to have almost 12,000 topics.
thanks,
jfDid you logout from the old account and do the delete from the new administrator account? You may have to click the padlock at the lower-left if it is locked.
-
How do you change users on the new ipad
Need help stwitching users on the new iPad.
Toyworks11 wrote:
Great answere Kappy. I will be doing this on my daughter's iPad so my son can borrow it for a while. My question is: Is there a way to restore the original owner's info back without going through all the settings again when they switch back?
The only way to do this is to do a backup of your iPad through iTunes on a computer before you wipe it clean and set it up as a new device. Do NOT rely on iCloud backup for this. Then, you'll need to be sure you give the iPad a different name when you set it up for your son. Better yet, either sync it to a different computer or don't sync it to a computer.
If you make sure you don't delete that backup on your computer, then you can restore from it later to return it to its current state. -
Can you have more than one user on the new ipad?
Can you have more than one user on the new ipad?
You cannot set up more than one user account on the iPad if that is what you mean.
Obviously families will share an iPad, but they are really meant to be single user devices with one Apple ID only on the iPad. Multiple ID's on one iPad can become a bit of a hassle to deal with.
There is no way to lock apps or email accounts so that can become an issue as well. If you use the built in mail app for email, whoever is using the iPad can read your email. -
How do you change an used ipad to a new user with a new itunes account?
How do you cange a used ipad to a new user with a new itunes account?
plug your ipad to your computer, open your itunes, click on the ipad icon, at the first page there is an option to "restore" ipad to its factory settings, click it. Don't remove USB connection, wait until it finishes wiping the data and it should place a new window that asks you to register the ipad.
There you go, your iPad is sync with your itunes account under your name, its best to also use "Find my iPad" just in case it gets lost, you can track it from your computer. Very handy tool and its free!
But if you want the data that is in the iPad, back up it first and sync the content to your library before restoring it to its factory settings
Have a great day and enjoy your iPad -
Re: (forte-users) Question-Minimizing Windows onstartup
I am not sitting in front of a Win95 machine currently, but I think I
remember a setting on the Shortcut tab in the Properties notebook about the
application, that allows you to Run the app either as 'Normal Window',
'Minimized', or 'Maximized.'
/\/\ark
----- Original Message -----
From: "Will Perkinson" <perkinson.willtowerautomotive.com>
To: "Forte Usergroup" <kamranaminyahoo.com>
Sent: Wednesday, March 01, 2000 10:31 AM
Subject: (forte-users) Question-Minimizing Windows on startup
How do you minimize the ftexec window when starting the client on a
Windows 95 platform?
The application starts but leaves the forte ftexec window open in the
background. Is there a way to hide this window or minimize it on
startup?
Thank you,
Will Perkinson
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comI am not sitting in front of a Win95 machine currently, but I think I
remember a setting on the Shortcut tab in the Properties notebook about the
application, that allows you to Run the app either as 'Normal Window',
'Minimized', or 'Maximized.'
/\/\ark
----- Original Message -----
From: "Will Perkinson" <perkinson.willtowerautomotive.com>
To: "Forte Usergroup" <kamranaminyahoo.com>
Sent: Wednesday, March 01, 2000 10:31 AM
Subject: (forte-users) Question-Minimizing Windows on startup
How do you minimize the ftexec window when starting the client on a
Windows 95 platform?
The application starts but leaves the forte ftexec window open in the
background. Is there a way to hide this window or minimize it on
startup?
Thank you,
Will Perkinson
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
I am trying to sync photograpghs from my PC to my ipad but it is saying ITunes cannot sync apps to the ipad "user's ipad" because the apps installed on the ipad could not be determined. I have no idea what that means. Can anyone help?
I'm sorry about your loss.
Are you trying to recover data from this iPad, or to set it up as new (erase everything on it, and simply use the iPad as if it were brand new as your new iPad)?
If the latter, you can place the iPad into recovery mode as shown here. You may have to try this several times:
iOS: Unable to update or restore -
I have 3 new user questions:
1. I currently have 3 active folders for email, SMS and MMS, & messages
- email and SMS / MMS contain correct data
- 'messages' is a duplicate of email and missed phone messages
How do I configure the 'messages' folder to contain correct data as intended?
2. MMS - please direct me to a knowledge base on how to configure and use this system correctly
3. how do I configure email and SMS / MMS to display symbols and emoticons as intended by senders?
- they currently display as meaningless characters
Thanks!Here's a great site - http://www.stinsonddog.com/
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Re: (forte-users) Question
This is a multi-part message in MIME format.
--------------4E6A4194374DC1BDF50CB1A1
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I would set the completion event for the display method of the new window and
register to this event in the main window as you see in the attached .pex file.
With this solution it is possible to handle a failor in the new window in order
to bahave like the normal completion and cause the deletion of the input element
in the main window.
Best Regards,
Tamas Deak
"Zirney, Bobby" wrote:
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/plain;
charset="iso-8859-1"
I have a frame with a button on it that will open up another frame. When I
close the second frame by pressing the X in the top right hand corner, I
want to clear all the data on the first screen. I have been trying all
sorts of things without success. Does anyone have any suggestions as to how
to do this?
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<DEFANGED-META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<DEFANGED-META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2448.0">
<DEFANGED-TITLE>Question</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2 FACE=3D"Arial">I have a frame with a button on it =
that will open up another frame. When I close the second frame by =
pressing the X in the top right hand corner, I want to clear all the =
data on the first screen. I have been trying all sorts of things =
without success. Does anyone have any suggestions as to how to do =
this?</FONT></P>
</BODY>
</HTML>
------_=_NextPart_001_01BEF4BD.83F24DA6--
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
--------------4E6A4194374DC1BDF50CB1A1
Content-Type: application/x-unknown-content-type-pex_auto_file;
name="Win.pex"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
filename="Win.pex"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--------------4E6A4194374DC1BDF50CB1A1--Bobby,
The simplest solution I think would be to use grids and map them to some business class - which I suppose you must be already using. In the event handler of the first window (button.click event) after you call the display method of the second window you can new the business class.
Kapil
From: Zirney, Bobby[SMTP:[email protected]]
Sent: Donnerstag, 2. September 1999 02:33
To: '[email protected]'
Subject: (forte-users) Question
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/plain;
charset="iso-8859-1"
I have a frame with a button on it that will open up another frame. When I
close the second frame by pressing the X in the top right hand corner, I
want to clear all the data on the first screen. I have been trying all
sorts of things without success. Does anyone have any suggestions as to how
to do this?
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<DEFANGED-META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<DEFANGED-META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2448.0">
<DEFANGED-TITLE>Question</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2 FACE=3D"Arial">I have a frame with a button on it =
that will open up another frame. When I close the second frame by =
pressing the X in the top right hand corner, I want to clear all the =
data on the first screen. I have been trying all sorts of things =
without success. Does anyone have any suggestions as to how to do =
this?</FONT></P>
</BODY>
</HTML>
------_=_NextPart_001_01BEF4BD.83F24DA6--
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected] -
RE: (forte-users) 3J= 3M new to me error
Hi Thomas,
Thanks for your email but I think it will be interesting for Brenda not me.
It is exactly what I have expected from Forte Support: detailed information
about bugs and workarounds. But what I cannot understand is that #53398 was
released without any information about possible reasons for this problem or
suggested workarounds. My first reaction after reading this bugreport was to
open a new case at CallCenter to get more information about it. Please
release more information with your bug reports !
Regards
Zenon Adamek
Information Services
Senior Programmer Analyst
Tel: 905 712-1084 ext. 3628
Fax: 905 712-6709
E-mail: zadamekpurolator.com
-----Original Message-----
From: Thomas Degen - Sun Germany Forte Tools - Bonn
[SMTP:thomas.degensun.com]
Sent: Wednesday, September 27, 2000 9:49 AM
To: Adamek, Zenon
Cc: 'Brenda Cumming'; Forte-userslists.xpedior.com
Subject: RE: (forte-users) 3J=>3M new to me error
Hi Zenon,
bug #53398 is not a bug which will likely get fixed, it's an informational
bugreport.
You might see an errorstack like Brenda has reported (and described in
informational
bugreport #53398) probably when you are doing something illegal that is
possible
via Forte Tool but Forte is not trapping it for performance reasons. Hence
you will see
the error coming from your illegal operation only at runtime, probably
only
while
running interpreted in the Forte IDE, but in worst case it might be even a
segmentation
violation.
Technotes 12448 'Sudden client partition crashes at runtime' and 11225
'Don't reparent
mapped Widgets between UserWindows at runtime' explain this matter . See
attached.
But maybe Brenda is much more experiencing a problem as described by Forte
Technote 11398 'Read Only Workspace Errors using ListViews or ActiveX
control'
that might get easily resolved via setting of FORTE_YIELD_THROTTLE=0.
Good Luck and Best Regards !
BTW: I've logged bug #53398, so I've felt responsible to explain its real
background.
Thomas
Thomas Degen
Sun Microsystems - Forte Tools
Forte CTE & Sustaining Group
Technical Support Germany
tel.:+49.228/91499-50
MailTo:thomas.degensun.com
Technote 11398 Read Only Workspace Errors using ListViews or ActiveX
control
SCENARIO:
Getting some unusual interpreter errors that result in an error stating
that
the workspace has been set to read only. Please see Enclosures for the
two
most common error stacks that have been encountered. The abbreviated
versions of the errors are:
- Can't read record (record size = -1)
- Id in index does not match id in record header in data file
- Recursive deserialization attempted.
- Unknown Mark type in deserialization
- Could not read record (64,74615) from repository data file.
Header
is corrupt.
These errors can be happening in either the development environment when
running from one of the development workshops, or with the deployed
application.
The bug outlined in this Technote may be the culprit if the errors above
are
seen when running a client on Windows NT or Motif and the user interface
incorporates ActiveX controls or ListView/TreeView widgets.
CAUSE:
Basically what is happening is that in rare circumstances Forte may invoke
a
nested copy of the interpreter while the first interpreter has yielded.
This
is not a problem in and of itself, but in the case where the original
interpreter was in the middle of a repository fetch when it yielded, and
the second interpreter needs to fetch code as well, we will get one of the
errors listed above, depending on the exact timing. The reason for the
errors is that the repository code at this level is thread-safe but not
re-entrant. It is protected by a mutex that is already owned by the
current task. Which, given the scenario outlined here, where the two
interpreters are running inside of the same task, results in the nested
interpreter being allowed to change data out from under the first.
While for every fetch one or more calls to WindowSystem.Yield will be made
(this is there to prevent the semblance of system lock-up on Win 3.1,
where
Yield is the only way other applications can be allowed to run), there is
a parameter which controls how often to actually yield, which by default
is
set to one out of every 100 calls. This is the reason the problem is
intermittent--you need a yield to occur during a repository fetch
which starts another interpreter which also needs to fetch code from
disk.
The reason this has only surfaced recently is that the nested interpreter
scenario can only happen in 2 cases that we know of:
- ActiveX controls which respond to events/Windows messages
- Outline fields/ListViews with column(s) mapped to virtual
attributes
In all other normal cases, the yield can process the message (typically a
paint message) without starting another interpreter, so regardless of
whether
the first interpreter yielded during a repository operation or not, there
is
no conflict.
SOLUTION:
The workaround is to prevent yields altogether by setting the
FORTE_YIELD_THROTTLE environment variable equal to 0 in the client's
environment. This should have no detrimental effects since the yield code
is in place solely for Windows 3.1x clients.
ERROR STACK 1
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to
prevent the application from attempting to write to the repository. The
repository and work you have saved to the repository are safe. If your
workspace
contains unsaved work, you may use the following procedure to save this
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import
the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::GetObjectById
Last TOOL statement: method EFWindowController.EFEventLoop
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
The remainder of the Error Manager stack is:
SYSTEM ERROR: Internal Error attempting to deserialize element (64,67470)
(fetch
bitmask is 0x20). Your workspace is now read-only to prevent the
application
from attempting to write to the repository. The repository and work you
have
saved to the repository are safe. If your workspace contains unsaved work,
you
may use the following procedure to save this work. First, export the
changed
components. Then, shut down and restart this application and reopen this
workspace in read-write mode. Finally, import the changed components and
save
your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Last TOOL statement: method EFTabManagerNew.EFNoteBookHandler
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
SYSTEM ERROR: Unknown Mark type in deserialization.
Class: qqsp_ImplementationException
Error #: [1101, 34]
Detected at: qqrp_DeSerializeObject::ProcessHdr
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
ERROR STACK 2
SYSTEM ERROR: A serious error has occurred in Repository
(c:\PROGRA~1\CSSPTEST\conplu0). Corrective action may be necessary.
Notify
your repository administrator.
Class: qqsp_ImplementationException
Error #: [1101, 198]
Detected at: qqrp_Repository::Fetch
Last TOOL statement: method
SalesDevelopment_NWC.DEVNotifyofTabSetCurrent
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
SYSTEM ERROR: Could not read record (64,74615) from repository data file.
Header is corrupt.
Class: qqsp_ImplementationException
Error #: [1106, 612]
Detected at: qqbt_BtreeAccess::FetchDataFileRecord
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
Technote 11225 Don't reparent mapped Widgets between UserWindows at
runtime
It is sometimes tempting to unparent a widget from one UserWindow and
reparent
it into another at runtime. However, this can cause crashes if the widget
(or
its decendants) are "mapped" to data. Here's why...
Suppose you have two UserWindows, UW1 and UW2. UW1 contains a DataField
(DF1)
which is mapped to a TextData. UW2 contains a RadioList (RL2) which is
mapped to
a scalar Integer. At compile time, every mapped attribute is internally
assigned
a "Map ID" (a small integer) which is used to tie the Widget to its
corresponding attribute. These Map IDs are used by the Widget to look up a
pointer to their data in a "Map" which is maintained by the UserWindow.
Each
UserWindow is assumed be to independent of the others, so there is nothing
wrong
with Widgets in different UserWindows being assigned the same Map IDs.
In
this
case, let's assume that DF1 and RL2 both got assigned the same Map ID of
3. No
problem so far, since each lives in a separate UserWindow with a separate
map.
Now suppose at runtime the application "detaches" or unparents DF1 from
its
UserWindow and reparents it somewhere into UW2. When it comes time for DF1
to
paint itself the Display System it must ask the Runtime System for the
value of
DF1's mapped attribute. To do that it says "give me the value of the
TextData
for DF1. You'll find it in the Map for this UserWindow (UW1), and its Map
ID is
3". When the runtime system goes to do this it expects to find a TextData
in
this "slot" of the map, but instead it picks up the integer which is
mapped to
RL2. At best this leads to bad data being returned; more likely you get a
segfault and a crash.
If DF1 was not a mapped attribute (say, a Rectangle) there would be no
problem
because there is no data mapped to a Rectangle. If instead of moving DF1
you
created a brand new DataField on the fly there would be no problem,
because the
dynamic DataField would not have any Map ID and so couldn't conflict with
any
IDs in UW2.
So how do you solve this problem? This is exactly what Nested Windows are
all
about. While you can't move DF1 into the middle of UW2, you can nest
UW1.
This
works because UW1 brings its map with it, and when you access DF1 it knows
to
look up its value in UW1's map.
UserWindows are intended to be the "unit of compilabilty" that can be
nested
inside other UserWindows. It is dangerous to "transplant" anything from
inside
one UserWindow into another at runtime.
(Note that you can't avoid this problem by cloning DF1 because the MapID
gets
copied along with it, and the clone will fail in the same way.)
Further details explained in related technote 12448 'Sudden client
partition
crashes at runtime.'
Technote 12448 Sudden client partition crashes at runtime
Scenario : You have two UserWindows, A and B. When Window A starts up, it
instantiates an instance of B and reparents some component of B into A's
window
hierarchy.
This is not allowed and almost always leads to an error at best or at
worse a
segmentation fault.
Here's why :
When you compile a UserWindow in Forte, each "mapped attribute" (whether a
form
element or menu element) is assigned an internal ID which represents an
offset into
that UserWindow's table of mapped attributes. This offset is only valid
in the
context of the UserWindow in which it was compiled. If you detach a
FieldWidget or
MenuWidget from one compiled Window ("tmpMenu" for example) and then
parent
into another compiled window ("tmpWindow") the internal ID comes with it.
When Forte tries to make use of that copied widget it uses the ID as an
offset
into tmpWindow's table of mapped attributes. But that copied offset is
meaningless in the context of tmpWindow's table, so you get some kind off
error.
In this case it found that the data type of the variable in the slot
wasn't
what
was expected. But you might even index off the end of the table and get a
segmentation fault.
There is nothing to prevent you from dynamically creating menu items and
adding
them to a window at runtime; that will work fine. Although of course you
can't
access them via mapped attributes, since those can only be created at
compile time.
But you are not allowed to reparent a widget from one compiled UserWindow
into
the hierarchy of another.
More information may be found in technote 11225 'Don't reparent mapped
Widgets
between UserWindows at runtime'.
Possible errorstacks seen at runtime instead of a complete crash or
segmentation
violation while you are illegally reparenting a widget or menuitem between
windows
at runtime:
Map::SetSubjectData: Invalid conversion from map type 0 to subject type 22
SYSTEM ERROR: Bad parameter at location 3 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 3
Error Time: Wed Aug 09 13:03:57
Exception occurred (locally) on partition "testproject_CL0_Client",
(partitionId = D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd,
taskId =
[D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd.68]) in application
"FTLaunch_cl0", pid 672 on node ONEWAY in environment Audi3M2Env.
At 13:14 26.09.00 -0400, Adamek, Zenon wrote:
Hi,
It is the unfixed defect 53398. Please contact Forte support.
Zenon
-----Original Message-----
From: Brenda Cumming [SMTP:brenda_cummingtranscanada.com]
Sent: Tuesday, September 26, 2000 1:15 PM
To: Forte User group
Subject: (forte-users) 3J=>3M new to me error
Hi,
We are in the process of going from 3J1 to 3.0.M.2, and I am getting
this error that I am unfamiliar with on a GUI that works fine in 3J.
It
does not happen all the time, and I have been unable to establish the
pattern that kicks it off. Has anyone seen this before?
PS- this error is not occurring in the deployed (non-compiled) app,but
when I am running locally from my workspace.
SYSTEM ERROR: Bad parameter at location 6 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 6
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2,
taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Can't find scope 20070 for a class.
Class: qqsp_Exception
Error #: [201, 11]
Detected at: qqlo_ClassTableLoadScope at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to prevent the application from attempting to write to the repository.
The repository and work you have saved to the repository are safe. If
your
workspace contains unsaved work, you may use the following procedure
to save this work. First, export the changed components. Then, shut down and
restart this application and reopen this workspace in read-write mode.
Finally, import the changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::IsDistributed
Last TOOL statement: method PPMeasWin.
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Internal Error attempting to deserialize element
(64,120684) (fetch bitmask is 0x20). Your workspace is now read-onlyto
prevent
the application from attempting to write to the repository. The
repository
and work you have saved to the repository are safe. If your workspace
contains unsaved work, you may use the following procedure to savethis
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Recursive Deserialization attempted, Internal Error!
Class: qqsp_UsageException with ReasonCode: SP_ER_INVALIDSTATE
Error #: [301, 231]
Detected at: qqsp_DeSerializeDriver::Run at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comHi Thomas,
Thanks for your email but I think it will be interesting for Brenda not me.
It is exactly what I have expected from Forte Support: detailed information
about bugs and workarounds. But what I cannot understand is that #53398 was
released without any information about possible reasons for this problem or
suggested workarounds. My first reaction after reading this bugreport was to
open a new case at CallCenter to get more information about it. Please
release more information with your bug reports !
Regards
Zenon Adamek
Information Services
Senior Programmer Analyst
Tel: 905 712-1084 ext. 3628
Fax: 905 712-6709
E-mail: zadamekpurolator.com
-----Original Message-----
From: Thomas Degen - Sun Germany Forte Tools - Bonn
[SMTP:thomas.degensun.com]
Sent: Wednesday, September 27, 2000 9:49 AM
To: Adamek, Zenon
Cc: 'Brenda Cumming'; Forte-userslists.xpedior.com
Subject: RE: (forte-users) 3J=>3M new to me error
Hi Zenon,
bug #53398 is not a bug which will likely get fixed, it's an informational
bugreport.
You might see an errorstack like Brenda has reported (and described in
informational
bugreport #53398) probably when you are doing something illegal that is
possible
via Forte Tool but Forte is not trapping it for performance reasons. Hence
you will see
the error coming from your illegal operation only at runtime, probably
only
while
running interpreted in the Forte IDE, but in worst case it might be even a
segmentation
violation.
Technotes 12448 'Sudden client partition crashes at runtime' and 11225
'Don't reparent
mapped Widgets between UserWindows at runtime' explain this matter . See
attached.
But maybe Brenda is much more experiencing a problem as described by Forte
Technote 11398 'Read Only Workspace Errors using ListViews or ActiveX
control'
that might get easily resolved via setting of FORTE_YIELD_THROTTLE=0.
Good Luck and Best Regards !
BTW: I've logged bug #53398, so I've felt responsible to explain its real
background.
Thomas
Thomas Degen
Sun Microsystems - Forte Tools
Forte CTE & Sustaining Group
Technical Support Germany
tel.:+49.228/91499-50
MailTo:thomas.degensun.com
Technote 11398 Read Only Workspace Errors using ListViews or ActiveX
control
SCENARIO:
Getting some unusual interpreter errors that result in an error stating
that
the workspace has been set to read only. Please see Enclosures for the
two
most common error stacks that have been encountered. The abbreviated
versions of the errors are:
- Can't read record (record size = -1)
- Id in index does not match id in record header in data file
- Recursive deserialization attempted.
- Unknown Mark type in deserialization
- Could not read record (64,74615) from repository data file.
Header
is corrupt.
These errors can be happening in either the development environment when
running from one of the development workshops, or with the deployed
application.
The bug outlined in this Technote may be the culprit if the errors above
are
seen when running a client on Windows NT or Motif and the user interface
incorporates ActiveX controls or ListView/TreeView widgets.
CAUSE:
Basically what is happening is that in rare circumstances Forte may invoke
a
nested copy of the interpreter while the first interpreter has yielded.
This
is not a problem in and of itself, but in the case where the original
interpreter was in the middle of a repository fetch when it yielded, and
the second interpreter needs to fetch code as well, we will get one of the
errors listed above, depending on the exact timing. The reason for the
errors is that the repository code at this level is thread-safe but not
re-entrant. It is protected by a mutex that is already owned by the
current task. Which, given the scenario outlined here, where the two
interpreters are running inside of the same task, results in the nested
interpreter being allowed to change data out from under the first.
While for every fetch one or more calls to WindowSystem.Yield will be made
(this is there to prevent the semblance of system lock-up on Win 3.1,
where
Yield is the only way other applications can be allowed to run), there is
a parameter which controls how often to actually yield, which by default
is
set to one out of every 100 calls. This is the reason the problem is
intermittent--you need a yield to occur during a repository fetch
which starts another interpreter which also needs to fetch code from
disk.
The reason this has only surfaced recently is that the nested interpreter
scenario can only happen in 2 cases that we know of:
- ActiveX controls which respond to events/Windows messages
- Outline fields/ListViews with column(s) mapped to virtual
attributes
In all other normal cases, the yield can process the message (typically a
paint message) without starting another interpreter, so regardless of
whether
the first interpreter yielded during a repository operation or not, there
is
no conflict.
SOLUTION:
The workaround is to prevent yields altogether by setting the
FORTE_YIELD_THROTTLE environment variable equal to 0 in the client's
environment. This should have no detrimental effects since the yield code
is in place solely for Windows 3.1x clients.
ERROR STACK 1
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to
prevent the application from attempting to write to the repository. The
repository and work you have saved to the repository are safe. If your
workspace
contains unsaved work, you may use the following procedure to save this
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import
the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::GetObjectById
Last TOOL statement: method EFWindowController.EFEventLoop
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
The remainder of the Error Manager stack is:
SYSTEM ERROR: Internal Error attempting to deserialize element (64,67470)
(fetch
bitmask is 0x20). Your workspace is now read-only to prevent the
application
from attempting to write to the repository. The repository and work you
have
saved to the repository are safe. If your workspace contains unsaved work,
you
may use the following procedure to save this work. First, export the
changed
components. Then, shut down and restart this application and reopen this
workspace in read-write mode. Finally, import the changed components and
save
your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Last TOOL statement: method EFTabManagerNew.EFNoteBookHandler
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
SYSTEM ERROR: Unknown Mark type in deserialization.
Class: qqsp_ImplementationException
Error #: [1101, 34]
Detected at: qqrp_DeSerializeObject::ProcessHdr
Error Time: Tue Nov 18 15:58:47
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1,
taskId =
[7EFAE060-4AFA-11D1-A1C1-1FDC8A99AA77:0x446:0x1.23]) in application
"ConPlus_GUI_cl0", pid 147 on node ISD060 in environment EdgeTest.
ERROR STACK 2
SYSTEM ERROR: A serious error has occurred in Repository
(c:\PROGRA~1\CSSPTEST\conplu0). Corrective action may be necessary.
Notify
your repository administrator.
Class: qqsp_ImplementationException
Error #: [1101, 198]
Detected at: qqrp_Repository::Fetch
Last TOOL statement: method
SalesDevelopment_NWC.DEVNotifyofTabSetCurrent
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
SYSTEM ERROR: Could not read record (64,74615) from repository data file.
Header is corrupt.
Class: qqsp_ImplementationException
Error #: [1106, 612]
Detected at: qqbt_BtreeAccess::FetchDataFileRecord
Error Time: Wed Dec 03 10:27:22
Exception occurred (locally) on partition "ConPlus_GUI_cl0_Client",
(partitionId = 769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1,
taskId =
[769D4310-6B88-11D1-84FD-65BF87C8AA77:0x121:0x1.22]) in application
"ConPlus_GUI_cl0", pid 172 on node ISD42 in environment Edge.
Technote 11225 Don't reparent mapped Widgets between UserWindows at
runtime
It is sometimes tempting to unparent a widget from one UserWindow and
reparent
it into another at runtime. However, this can cause crashes if the widget
(or
its decendants) are "mapped" to data. Here's why...
Suppose you have two UserWindows, UW1 and UW2. UW1 contains a DataField
(DF1)
which is mapped to a TextData. UW2 contains a RadioList (RL2) which is
mapped to
a scalar Integer. At compile time, every mapped attribute is internally
assigned
a "Map ID" (a small integer) which is used to tie the Widget to its
corresponding attribute. These Map IDs are used by the Widget to look up a
pointer to their data in a "Map" which is maintained by the UserWindow.
Each
UserWindow is assumed be to independent of the others, so there is nothing
wrong
with Widgets in different UserWindows being assigned the same Map IDs.
In
this
case, let's assume that DF1 and RL2 both got assigned the same Map ID of
3. No
problem so far, since each lives in a separate UserWindow with a separate
map.
Now suppose at runtime the application "detaches" or unparents DF1 from
its
UserWindow and reparents it somewhere into UW2. When it comes time for DF1
to
paint itself the Display System it must ask the Runtime System for the
value of
DF1's mapped attribute. To do that it says "give me the value of the
TextData
for DF1. You'll find it in the Map for this UserWindow (UW1), and its Map
ID is
3". When the runtime system goes to do this it expects to find a TextData
in
this "slot" of the map, but instead it picks up the integer which is
mapped to
RL2. At best this leads to bad data being returned; more likely you get a
segfault and a crash.
If DF1 was not a mapped attribute (say, a Rectangle) there would be no
problem
because there is no data mapped to a Rectangle. If instead of moving DF1
you
created a brand new DataField on the fly there would be no problem,
because the
dynamic DataField would not have any Map ID and so couldn't conflict with
any
IDs in UW2.
So how do you solve this problem? This is exactly what Nested Windows are
all
about. While you can't move DF1 into the middle of UW2, you can nest
UW1.
This
works because UW1 brings its map with it, and when you access DF1 it knows
to
look up its value in UW1's map.
UserWindows are intended to be the "unit of compilabilty" that can be
nested
inside other UserWindows. It is dangerous to "transplant" anything from
inside
one UserWindow into another at runtime.
(Note that you can't avoid this problem by cloning DF1 because the MapID
gets
copied along with it, and the clone will fail in the same way.)
Further details explained in related technote 12448 'Sudden client
partition
crashes at runtime.'
Technote 12448 Sudden client partition crashes at runtime
Scenario : You have two UserWindows, A and B. When Window A starts up, it
instantiates an instance of B and reparents some component of B into A's
window
hierarchy.
This is not allowed and almost always leads to an error at best or at
worse a
segmentation fault.
Here's why :
When you compile a UserWindow in Forte, each "mapped attribute" (whether a
form
element or menu element) is assigned an internal ID which represents an
offset into
that UserWindow's table of mapped attributes. This offset is only valid
in the
context of the UserWindow in which it was compiled. If you detach a
FieldWidget or
MenuWidget from one compiled Window ("tmpMenu" for example) and then
parent
into another compiled window ("tmpWindow") the internal ID comes with it.
When Forte tries to make use of that copied widget it uses the ID as an
offset
into tmpWindow's table of mapped attributes. But that copied offset is
meaningless in the context of tmpWindow's table, so you get some kind off
error.
In this case it found that the data type of the variable in the slot
wasn't
what
was expected. But you might even index off the end of the table and get a
segmentation fault.
There is nothing to prevent you from dynamically creating menu items and
adding
them to a window at runtime; that will work fine. Although of course you
can't
access them via mapped attributes, since those can only be created at
compile time.
But you are not allowed to reparent a widget from one compiled UserWindow
into
the hierarchy of another.
More information may be found in technote 11225 'Don't reparent mapped
Widgets
between UserWindows at runtime'.
Possible errorstacks seen at runtime instead of a complete crash or
segmentation
violation while you are illegally reparenting a widget or menuitem between
windows
at runtime:
Map::SetSubjectData: Invalid conversion from map type 0 to subject type 22
SYSTEM ERROR: Bad parameter at location 3 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 3
Error Time: Wed Aug 09 13:03:57
Exception occurred (locally) on partition "testproject_CL0_Client",
(partitionId = D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd,
taskId =
[D4914A10-36C1-11D4-91B3-419AA33BAA77:0x208:0xd.68]) in application
"FTLaunch_cl0", pid 672 on node ONEWAY in environment Audi3M2Env.
At 13:14 26.09.00 -0400, Adamek, Zenon wrote:
Hi,
It is the unfixed defect 53398. Please contact Forte support.
Zenon
-----Original Message-----
From: Brenda Cumming [SMTP:brenda_cummingtranscanada.com]
Sent: Tuesday, September 26, 2000 1:15 PM
To: Forte User group
Subject: (forte-users) 3J=>3M new to me error
Hi,
We are in the process of going from 3J1 to 3.0.M.2, and I am getting
this error that I am unfamiliar with on a GUI that works fine in 3J.
It
does not happen all the time, and I have been unable to establish the
pattern that kicks it off. Has anyone seen this before?
PS- this error is not occurring in the deployed (non-compiled) app,but
when I am running locally from my workspace.
SYSTEM ERROR: Bad parameter at location 6 in method
qqrt_MapClassAccess::ProcessSubjectData.
Class: qqsp_Exception
Error #: [1001, 381]
Detected at: qqrt_MapClassAccess::ProcessSubjectData at 6
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2,
taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Can't find scope 20070 for a class.
Class: qqsp_Exception
Error #: [201, 11]
Detected at: qqlo_ClassTableLoadScope at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Because of a prior error, your workspace was set to
read-only to prevent the application from attempting to write to the repository.
The repository and work you have saved to the repository are safe. If
your
workspace contains unsaved work, you may use the following procedure
to save this work. First, export the changed components. Then, shut down and
restart this application and reopen this workspace in read-write mode.
Finally, import the changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 695]
Detected at: qqrp_Session::IsDistributed
Last TOOL statement: method PPMeasWin.
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Internal Error attempting to deserialize element
(64,120684) (fetch bitmask is 0x20). Your workspace is now read-onlyto
prevent
the application from attempting to write to the repository. The
repository
and work you have saved to the repository are safe. If your workspace
contains unsaved work, you may use the following procedure to savethis
work.
First, export the changed components. Then, shut down and restart this
application and reopen this workspace in read-write mode. Finally, import the
changed components and save your workspace.
Class: qqrp_RepResourceException
Error #: [1101, 61]
Detected at: qqrp_LogicalSession::MaterializeObject
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition
"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
SYSTEM ERROR: Recursive Deserialization attempted, Internal Error!
Class: qqsp_UsageException with ReasonCode: SP_ER_INVALIDSTATE
Error #: [301, 231]
Detected at: qqsp_DeSerializeDriver::Run at 1
Error Time: Wed Sep 20 14:32:54
Exception occurred (locally) on partition"ABSDevtStartUp_CL0_Client",
(partitionId = 36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2, taskId =
[36172000-5DA8-11D4-B1F0-14015EDAAA77:0x2da:0x2.25]) in
application
"Forte_cl0", pid 93 on node T5621 in environment AbisDMEnv.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in anew
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
Come on Apple.....get this issue sorted out!Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.
-
I am trying to restore software on my iPad which is connected to my PC with iTunes when i'm in recovery mode a warning comes up
"The iPad could not be restored an unknown error occurred (1604) This i have discovered probably a USB timing problem ?
I have followed all suggestions but still my iPad screen is locked with a iTunes logo and a USB cable beneath it, wish I had never bothered
to update it now. Any help would be appreciated. rgWhen I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
I am a long time iTunes user but a new MacBook owner! I keep the majority of my music files on an external hard drive. I'm trying to view all those files on my MacBook through iTunes. With windows you would go to : File/Add To Library, and iTunes would add all your selected files to your music library BUT WOULD NOT COPY THEM TO YOUR HARD DRIVE. In other words, if the external hard drive was connected, you could listen, drag/drop, and edit the files. When I tried the same thing with my new MacBook... it actually started coping the files to my MacBook harddrive. I don't want that, it's millions and millions of mp3's that I don't want to keep on my computer, only my external hard drive. Can anyone help? I'm sure it's something easy, I'm just so new to the Mac world. Being an iPhone owner for many many years I'm picking up things fast, but this is getting the best of me! Help !
In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"
-
Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?
There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files. Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User. -
i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?
Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
One can still do most Admin things in Standard user.
Maybe you are looking for
-
JDeveloper, ADF, Quartz: Quartz Using different Classpath than Backing bean
Hi, I have an ADF 10g application. When i get an Application module using Configuration.createRootApplicationModule, it works fine in normal java class or backing bean. Now i have an quartz configured in this project. The same code does not work in Q
-
Can't use punycode domain on azure website. Getting 404 Not Found.
I attached punycode domain to azure website using powershell (Set-AzureWebsite). Domain is shown is azure output of Get-AzureWebsite and in Azure portal. But when I try to access website using domain, I'm getting 404 NotFound azure page. When I go to
-
I'm new to numbers, and have been learning how to use the software - great tool! I have - what should be - a simple request, but I have not found the answer just yet - so I'd like some feedback and direction. I have a sheet set up which I would like
-
Set Date Time Computer with Java in Linux OS
Dear All, How to set date time computer with Java in linux OS? Rgds, Theo
-
How can I take something I pasted off my screen? It won't come off
I was in my calendar trying to add something to a day and I pasted something and this won't come off my screen. I can not delete this thing. I have restarted the computer,logged out and I can't click on my calendar with this "pasted" thing on my comp