Warning: This request requires buffering data to succeed (while Publishing using VS 2012 to Cloud Service - Web Role
While publishing using VS 2012 professional to Azure Web Role getting following warning. After this warning even if i waited for hours, publish process never finish and then I have to manually deploy the package on Azure Cloud Instance.
Warning: This request requires buffering data to succeed.
Thank you for reply @Will,
I do not have access to my work station computer at this moment. will share the screenshot. Basically what happens is -
1. I start the publish wizard on Windows Azure Project (which as one web role configured)
2. Proceed the publish wizard with advanced options enabled for remote debugging and remote connection enabled.
3. The publish wizard finish and it starts uploading the package and configuration on the azure could service.
4. In the Microsoft Windows Azure activity log pane of the Visual Studio 2012 Professional, after 10-15 minutes it starts showing following warning continously, i even waited for few hours but publish process never completes. Finally i have cancel the publish
process and upload packages and config manually on the azure portal.
Warning: This request requires buffering data to succeed.
Similar Messages
-
Cloud service web role did not get request
Hi Team,
we have an application host in web role in a cloud service,
sometimes it keeps loading when clicking a button in GUI and got no response till our GUI timeout (30 minutes)
we use Fiddler to trace the http request and also check IIS logs and found that sometimes the web role didn't get a request, sometimes the IIS
got the request and finished to processe the request but didn't return result to GUI.
it seems the message lost during interaction between UI and web role.
note that this problems comes out just recently.
is there some known issues related with this kind of problems.
thanks in advance.hi Baker,
Firstly, I need confirm what's meaning is GUI from your description ? The GUI is your cloud service project UI? Or your UI in your client?
Secondly, base on my experience, we usually could occur timeout error because of the azure load balancer and the long time request.
For this error, I recommend you refer to those thread:
Azure Web Role - Long Running Request (Load Balancer Timeout?)
Windows Azure Load Balancer TimeOut for Cloud Service Roles (PAAS Web/Worker)
Windows Azure Load Balancer Timeout Details
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/89b283f0-dfca-49a7-99fe-c3b73d77ff6d/azure-load-balancer-sending-http-request-to-multiple-web-role-instances?forum=windowsazuredevelopment
If I misunderstood, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HTTP Status 401. This request requires HTTP authentication ()
Hi!
Could you please help me with the following problem: i go to Infoview login page using the link: http://mostro-bo-web:8082/InfoViewApp/logon.jsp. When i use the IE there is no problem, i go to login page, but when i use Mozilla browser i have the following error:
HTTP Status 401 - type Status report
description This request requires HTTP authentication ().
Apache Tomcat/5.5.20
We use SSO for Infoview for domen users, but when i go to login page (http://mostro-bo-web:8082/InfoViewApp/logon.jsp) i'm not in domain (my computer isn't in domain) and when i use IE i go to login page of InfoView, but when i use Firefox i have error above.
What's the problem?
Thanks, ViktorHi,
try the following URL:
http://YOUR_BO_SERVER:8080/InfoViewApp/logonNoSso.jsp
Check also SAP Note 1326266 and 1263764
Regards
-Seb. -
Does this phone require a data plan?
Hello to anyone who is reading this! I am wanting to get a new phone because the one I have currently is falling apart. My parents say that if I get a smartphone I will have to pay the $30ish a month for the data plan, so I'm looking at basic phones. I have come across a no contract verizon cellphone called the 'LG VX11000 enV Touch' on ebay. I was just curious if this required a data plan? Some people in discussions have said it does, and some have said the opposite.
http://www.ebay.com/itm/LG-VX11000-ENV-TOUCH-VERIZON-PHONE-NO-CONTRACT-GOOD-ESN-30-DAY-WARRANTY-/131029164755?pt=Cell_Phones&hash=item1e81f262d3No, the enV Touch doesn't require a data plan on a post-paid account. You may have to put a data block on the phone, though. If buying off ebay, just ensure that it's Verizon branded with a clean ESN.
-
help?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Error while creating data set in bi publisher using web service
This page contains the following errors:
error on line 3 at column 1: Extra content at the end of the document
Below is a rendering of the page up to the first error.
data engine log:
<?xml version="1.0" encoding="UTF-8" ?>
- <debugLog>
- <msg time="2012-02-23T10:34:28.501+05:30" comp_id="AdminServer" type="WARNING" level="1" host_id="L912886GX" host_addr="10.184.238.187" module="oracle.xdo" tid="1577" user="<anonymous>" ecid="a385c714f2238194:53ca0830:1357b232dac:-8000-0000000000018f84" rid="1:16585">
<attr name="APP" value="bipublisher#11.1.1" />
<txt>java.io.FileNotFoundException: D:\BITEST_HOME\user_projects\domains\bifoundation_domain\www.webservicex.net\stockquote.asmx?WSDL (The system cannot find the path specified) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.<init>(FileInputStream.java:106) at java.io.FileInputStream.<init>(FileInputStream.java:66) at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70) at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161) at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.setupCurrentEntity(XMLEntityManager.java:653) at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(XMLVersionDetector.java:186) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:772) at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737) at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119) at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284) at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163) at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:369) at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:420) at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:482) at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:361) at java.lang.Thread.run(Thread.java:662)</txt>how about pasting the content of your data template here, so that forum members can see what could be the problem.
-
I have an SSRS 2012 report and SSAS Cube in 2008. My report criterion requires filtering on measures. So Created measures as dimensions . The report requires >= functionality on the measures. But in the Query designer of
the report there is =, IN, Within Range ,Excluding range , MDX as the operators.
To achieve my goal. I have “From” and “To” as parameters on the numeric dimension. The “To” parameter I have set as internal and setting
the default value of “TO” .By writing another Dataset query that returns the “MAX”
value and the MAX value returned is a member of the measure converted to dim I confirmed.. So this whole works as >=.The user enters only the “FROM” parameter and the “TO” is set internally. The user can enter any value in the “From” parameter. Any
value that is not even a member.It is a textbox. I cannot use a list of values from the “From” parameter.
But whenever I run the report after entering all the selection criteria
I keep getting
Error “the restrictions imposed by the constrained flag in the strtomember functions were violated”
I know this means that Max value in the “TO” section is not a member .
I did try
: StrToMember("[Fact RCS CV BLAST].[APPRLIMIT ACH].
&[" & @ToFactRCSCVBLASTAPPRLIMITACH &
"]", CONSTRAINED) )
But I get “syntax for the “&” is incorrect”
If I use Drop down for the “From” and “To” parameters then it works fine. But that’s not what Business Users need.
Please let me know what the options to make this work. I did use parameters that filter the
Dataset returned it works fine but there is a performance impact.Hi,
I think if you use the following method you will be able to compare the members.
CDbl(StrToMember("[Fact RCS CV BLAST].[APPRLIMIT ACH].&[" + @ToFactRCSCVBLASTAPPRLIMITACH + "]").Member_Name)
As you mentioned that you converted your measures as dimensions, you are having an integer value as the member name. In that case use VBA functions with MDX to do the datatype conversion.
Take a look into the following MDX written against Adventure Works;
WITH CALCULATED MEMBER [Measures].[Member Name] AS
CInt
Right
CStr
[Date].[Calendar Year].CURRENTMEMBER.MEMBER_NAME
), 4
SELECT {[Measures].[Sales Amount], [Measures].[Member Name]} ON COLUMNS,
FILTER
[Date].[Calendar Year].[Calendar Year].MEMBERS,
CInt(Right(CStr([Date].[Calendar Year].CURRENTMEMBER.MEMBER_NAME), 4)) >= 2005 AND
CInt(Right(CStr([Date].[Calendar Year].CURRENTMEMBER.MEMBER_NAME), 4)) <=2008
} ON ROWS
FROM [Adventure Works]
I am filtering the Years by using the member names by extracting the Integer portion of the member name and applying data type conversion functions in VBA. So I
Keep in mind that you have to get rid of the CONSTRAINED clause if your business users can enter anything on the SSRS text box. -
Can we chnge segment data of IDOC while processing using EXITS ?
Hi All,
We have requirement that we have to do validations while processing of IDOC i.e. using User EXIT.
i can access the data and can do validations final i can update the tables data coming from user exit , but I'm not able to update the Segment field data.
here we can directly update the database , but i'm not able change the IDOC segment values .
for example
FOR cond_a IDOC
THE USER EXIT==>EXIT_SAPLVKOI_002
FUNCTION EXIT_SAPLVKOI_002.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(IDOC_CONTROL) LIKE EDIDC STRUCTURE EDIDC
*" VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*" TABLES
*" IDOC_DATA STRUCTURE EDIDD
*" EXCEPTIONS
*" APPLICATION_ERROR
i can acess the segement values using IDOC_DATA and validations are done .
but how can i update this segmnent values that must apper in IDOCS again .if we see in we05.
Regards
Nandan.Hi Nadan ,
Yes we can change segment data of an Idoc in the Exits.
Below is the code to change the Idoc segment data .
Here I took E1EDK04 as example I read the data from E1EDK04 and I change the segment data
READ TABLE t_idoc_data INTO is_edidd
WITH KEY segnam = c_segnam_e1edk04. "#EC *
IF sy-subrc EQ 0.
MOVE: is_edidd-sdata TO is_e1edk04.
ENDIF.
IF l_betrg = c_betrg.
is_e1edk04-mwskz = C_TAX20.
is_e1edk04-txjcd = c_txjcd.
ELSEIF l_betrg = c_betrg1.
is_e1edk04-mwskz = C_TAX21.
is_e1edk04-txjcd = wa_ekpo-txjcd.
ENDIF.
LOOP AT t_idoc_data
WHERE docnum = i_idoc_contrl-docnum.
CASE t_idoc_data-segnam .
WHEN c_segnam_e1edk04.
MOVE is_e1edk04 TO is_edidd-sdata.
MODIFY t_idoc_data FROM is_edidd.
ENDCASE.
ENDLOOP.
Please let me know if u have any Queries .
Rgds
Sree m -
I am asking for feedback on this design. Here is an example user story:
As a group admin on the website I want to be notified when a user in my group uploads a file to the group.
Easiest solution would be that in the code handling the upload, we just directly create an email message in there and send it. However, this seems like it isn't really the appropriate level of separation of concerns, so instead we are thinking to have a separate
worker process which does nothing but send notifications. So, the website in the upload code handles receiving the file, extracting some metadata from it (like filename) and writing this to the database. As soon as it is done handling the file upload it then
does two things: Writes the details of the notification to be sent (such as subject, filename, etc...) to a dedicated "notification" table and also creates a message in a queue which the notification sending worker process monitors. The entire sequence
is shown in the diagram below.
My questions are: Do you see any drawbacks in this design? Is there a better design? The team wants to use Azure Worker Roles, Queues and Table storage. Is it the right call to use these components or is this design unnecessarily complex? Quality attribute
requirements are that it is easy to code, easy to maintain, easy to debug at runtime, auditable (history is available of when notifications were sent, etc...), monitor-able. Any other quality attributes you think we should be designing for?
More info:
We are creating a cloud application (in Azure) in which there are at least 2 components. The first is the "source" component (for example a UI / website) in which some action happens or some condition is met that triggers a second component or "worker"
to perform some job. These jobs have details or metadata associated with them which we plan to store in Azure Table Storage. Here is the pattern we are considering:
Steps:
Condition for job met.
Source writes job details to table.
Source puts job in queue.
Asynchronously:
Worker accepts job from queue.
Worker Records DateTimeStarted in table.
Queue marks job marked as "in progress".
Worker performs job.
Worker updates table with details (including DateTimeCompleted).
Worker reports completion to queue.
Job deleted from queue.
Please comment and let me know if I have this right, or if there is some better pattern. For example sake, consider the work to be "sending a notification" such as an email whose template fields are filled from the "details" mentioned in
the pattern.Hi,
Thanks for your posting.
This development mode can exclude some errors, such as the file upload complete at the same time... from my experience, this is a good choice to achieve the goal.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to use "Data Conflicts Window while Publishing " with TFS API
This dialog appears in Ms-Excel Addin for TFS .. is there any possibility to use this control in another custom addin application ?
Hi Shiraz,
I don't know what this error window exactly is, but it may be a standard API located in TFS SDK. I'm not sure if you can show this error window control from the TFS API, but I think it's possible if you create a new one from scratch, by using Winform/WPF
controls in your own add-in application.
For how to extend the TFS client/server, you need to know the basics of TFS object model, refer to this MSDN documentation for more information:
Extending Team Foundation
For example, this code snippet can show the "Connect to TFS server dialog" to you:
TfsTeamProjectCollection teamCollection;
var picker = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false);
picker.ShowDialog();
if (picker.SelectedTeamProjectCollection != null && picker.SelectedProjects != null)
teamCollection = picker.SelectedTeamProjectCollection;
else
return;
You need to add reference to the TFS assemblies into your project.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Does the LG Dare require a data plan?
I have an LG Dare that I would like to use on an existing plan. BUT I dont want to pay for data, so I was wondering since Verizon has changed so much with their plans, does the LG Dare require a data plan in order to use it on my plan? All I use the phone for is calls and unlimited texting, no internet. Why pay for something I will never use?
~ Note: My current phone is the LG EnV 2 (no data required on it)...which died completely on me. Hence why Im wanting to switch to my old phone LG Dare.~
Thanks!@turtlegurl86,
We appreciate you bringing this to the attention of the forum. It is fantastic to see of your proactive nature.
The LG Dare does not require a data package. If you would like to add a data package. The current data option for the device is $10 / 75 MB.
I'm sure you will find this information beneficial. It was a great to hear from you.
YosefT_VZW
VZW Support
Follow us on Twitter @VZWSupport -
Date Parameter in XML Publisher Enterprise
Hello,
Can someone tell me how to set up a date parameter in XML Publisher Enterprise? I cannot seem to get the right format for a date parameter, so my report will run. This report requires a date to be entered before the report can run. I am trying to use the format 'YYYY-MM-DD'.
Any help would be greatly appreciated...
Thank you,
SusanHi Susan,
I also had some problems but found out the spelling is the key, so letters for day and years has to be small letter, letter for month has to be capital - a sample date format looks like
dd-MM-yyyy ( check the possible formats of fields in RTF-Templates! )
But anyway using date parameters seems a little instable in 5.6.2 - I have to save the parameter all the time even if I didn't change anything otherwise there was runtime errors
Dirk -
I keep getting the following warning:
A crash occured on (date) at (time) while running "Applications": Memorymgr.c, Line:5346, Chunk under-locked
What is causing this? It usually happens overnight while I'm not using my phone... so the first time I touch it in the morning it shuts off and resets. The problem started occuring after Sprint switched from "On Demand" to "Pocket Express". I had no idea of the switch, so when I clicked on it the phone automatically updated to the new application. Since then, my phone has been a mess. I deleted the application, performed a hard reset and downloaded it on my phone again.. but still there's problems. This morning, I deleted the "Pocket Express" for good. I figured it wasn't worth it if it's causing all these problems.
Help... please. I'm a novice, so please make sure the solution is something I can understand. Also, do I need to go through my Palm Desktop/Hot Sync program on my computer and delet files too?
Thank you in advance.
Phone: Treo 755p
Carrier: Sprint
P.S. I also just installed the Sprint Treo software update: Treo755p-1.07-SPNT
It cleaned things up... but not for long.
Post relates to: Treo 755p (Sprint)After a hard reset and after you delete the program on the device, you will need to rename the backup folder in your username folder on the PC. The backup folder contains all 3rd party programs and settings for your device. When you sync, the backup folder is reloaded onto your device and will bring back the 3rd party programs.
Follow the instructions below for the procedure I described.
Looks like you may need to hard reset and rename your backup folder if you go
to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the
directions to do a hard reset. Next before you hotsync your data back over
you will need to rename your backup folder to do that go here
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.Find your username folder
Post relates to: Palm i705 -
We have a need to correct affinity of Cloud Service, Azure DB, Storage and Mobile Services such that they are on a singl datacenter and do not get impacted by network latency when these components communicate with each other. Also to distribute various environments
across different data centers we need to realign some environments to mitigate all environments getting impacted if there is outage.
Existing Cloud Services and related Service Bus queues and topics need to be moved to a different datacenter. Is there a way to do this without having to redeploy cloud services (web and worker roles) or recreate the service bus entities (queues and topics)?
Also, the existing Cloud Service URL need to be retained without with user authentication won't be possible and hence when completed, the new cloud service should have the same URL.
Please provide best available options for achieving this or ask question if more information is needed.Hi sumeetd,
As far as I know, currently there is no directly way to move services from one data center to another unless redeployment. You could submit a feature suggestion via this page (http://feedback.azure.com/forums/34192--general-feedback
). And at the same time,you could contact with azure support team via the channel below:
http://www.windowsazure.com/en-us/support/contact/
Any questions, please feel free to let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Usage of sequence for uploading data into tables(column store) using CSV
How to make use of sequence when data is uploaded into table(column store) with the CSV file ?
Hi Sharada,
You may have to follow the below steps:
1) To load the data from flat file to a Staging table using IMPORT command
2) You have to call the procedure to load the data further into final Table.
a) Have a look on this procedure to load data :
SAP HANA: Generic Procedure using Arrays to Load delta data into Tables
b) See my reply on the syntax on how to use "Sequence"
Auto-Incrementor in stored procedure!
You will have to ensure that you frame your insert query in such a way to have the sequence number in the target table.
Regards,
Krishna Tangudu
Maybe you are looking for
-
Attachment List Table In sales order VA02.
Sir, I have to develop report on attachment list in sales order on the basis of sales order number and customer no. But I'm not getting the tables. So I can develope the report. Thanks Manoj Pise
-
Can't update iPhone 4S to iOS 5.1 through iTunes or phone itself
I've tried updating my iPhone 4S to iOS 5.1 through iTunes(latest update) and all i get is the 'Contacting iPhone software update server' box and then nothing. It just stays on this box with nothing happening for as long you allow it. I've also trie
-
Is it possible to use an effects 'Reset' or 'Clear' mode in an expression?
Hi all, hopefully someone can help me with this. I'm using 'CC Time Blend FX' in a project I'm working on. Am using it in multiple pre comps, and before rendering I need to go into each pre comp and push the 'Clear' button at 00:00 to clear any image
-
Touch 2G: design limits case options?
If you wanted to keep your Touch 2G in a leather or silicone case, wouldn't that make it very hard to hear the internal speaker?
-
When trying to open a website with .jsp extension, Firefox shuts
when trying to access this website, both firefox and internet explorer completely shut all opened tubs. What can i do to resolve it?