Warnings while compiling and something for the wish list
Just now and then when I try to compile one of my packages I get the following warning:
Warning(95,29): PLW-07203: Message 7203 not found; No message file for product=plsql, facility=PLW.
Of course, 95 and 29 are the line and column numbers for me to find the place of the warning. However I'm pretty sure there's something missing in my conf files in order the Raptor can pick the correct message from the files where Oracle store the globalization support (spanish is the language of my machine). Can anyone point me in the right direction to fix this?
By the way, something for the wish list: in Data Dictionary Reports I would love to see all the information related to OWI: you know: v$event_name, v$session_wait, v$session_event, v$event_histogram, etc. Maybe some GOOD reports to encourage everyone to study and learn the Wait Interface.
Thanks a lot.
Actaully the message not found is an issue with the DB install. You should look on metalink for how to fix it.
-kris
Similar Messages
-
- A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one window without having to be in full screen mode? I've managed to go some time like this, but right now it's just really annoying me. HELP!!!
Just drag the small window to the top right below the toolbar, you'll see the area highlighted and when you drop it the file should dock.
-
Apple should do something for the equipment stolen something like block it(them) and only activated by key words given to register the device on the apple's website
Tell Apple:
http://www.apple.com/feedback
Doubtful that this would happen. Privacy laws would likely be tested with this.
No manufacturer does this. -
I did a master reset on my iphone4 the apple sign poped up and now for the last hour there is just a spinning icon as if something's loading helpp
DFU Mode Restore
Open iTunes on computer. Connect iPhone to computer with USB Cable. Then hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds of holding Home button. If the screen is black this is DFU Mode. Then click Restore button of iTunes. -
Unsupported version Error while generating header and footer for the PDF
hi
I want to genrate header and footer for the PDF file however on the call of the EndPage class i got a Unsupported Version Error Unsupported major minor Version Error and Class loader Define class
What has gone wrong ?.Can you provide more information about what you were trying to do? In particular, what does your code like like?
Also, can you include the stack trace, and the complete error message? -
Hi the title explains it and i need help cause it is really annoying and i am not sure if i need to get a new ipod please help and tell me wahat to do thanks and the question is my ipod 4th gen is not letting me agree to the lattest terms and conditions for the apple store the latest terms and conditions is the march one thanks soo much if you can help me :)
- Try a reset. Nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Also see the previous discussions on the right side of this page under the heading "More Like This" with your same problem. -
Error while setting up enviroment for the application
Hi,
Im getting a popup box displaying the error message
C:\WINDOWS\system32\ntvdm.exe
Error while setting up enviroment for the application. Choose 'Close' to terminate the application.
When I try to excute an external exe, why am I getting this error? and is there a way of getting this exe to execute properly without the error?
Here my code for excuting the external exe
String[] cmd = {"C:/gen.exe", "C:/a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor(); "gen.exe" is the program i wish to execute and "a.zip" is the parameter i wish to excute it with.class ExecRuntime {
public static void main(String args[]) throws Exception {
String[] cmd = {"C:\\gen.exe", "C:\\a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor();
} Here we need to use backslashes, because the command is passed to the OS as is.
If you need to be in C:\ to execute from command line, you will also need to use the
exec() version that allows you to specify the 'current directory'
Edited by: baftos on Mar 7, 2008 12:13 PM -
"error while evaluating Java script for the package"
Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.
Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.
-
Attribute warnings while compiling GMP
Hi,
I'm getting the following attribute warnings while compiling GMP with Sun Studio 12:
"../../gmp-impl.h", line 2810: warning: attribute "mode" is unknown, ignored
"../../gmp-impl.h", line 2810: warning: attribute parameter "QI" is undefined
"../../gmp-impl.h", line 2811: warning: attribute "mode" is unknown, ignored
"../../gmp-impl.h", line 2811: warning: attribute parameter "SI" is undefined
"../../gmp-impl.h", line 2813: warning: attribute "mode" is unknown, ignored
"../../gmp-impl.h", line 2813: warning: attribute parameter "DI" is undefined
Is there some special way that these attributes need to be handled? The build completed ok, but I'd like to know if I needed to set a #define somewhere. I couldn't find anything specific to Sun Studio about this.
Thanks.
-John
John Center
Villanova UniversityI noticed in GMP 4.2.4 that there was a flag for attribute const (__GMP_NO_ATTRIBUTE_CONST_PURE), but configure tests for all the others & claims that they all are supported:
checking whether gcc __attribute__ ((const)) works... yes
checking whether gcc __attribute__ ((malloc)) works... yes
checking whether gcc __attribute__ ((mode (XX))) works... yes
checking whether gcc __attribute__ ((noreturn)) works... yes
I'm not sure how these tests are conducted, but they clearly don't work with Sun Studio:
configure:26279: checking whether gcc __attribute__ ((const)) works
configure:26300: cc -xc99=%all -c -g -xs -fast -fsimple=1 -fns=no -xtarget=ultra
T1 -xarch=sparcvis2 -m64 -mt -xipo -xcode=pic32 -xpagesize=default -xlic_lib=sun
perf -I/opt/gnu/include -I/opt/local/include -I/usr/sfw/include -I/usr/include
conftest.c >&5
configure:26306: $? = 0
configure:26310: test -z
|| test ! -s conftest.err
configure:26313: $? = 0
configure:26316: test -s conftest.o
configure:26319: $? = 0
configure:26331: result: yes
configure:26341: checking whether gcc __attribute__ ((malloc)) works
configure:26350: cc -xc99=%all -g -xs -fast -fsimple=1 -fns=no -xtarget=ultraT1
-xarch=sparcvis2 -m64 -mt -xipo -xcode=pic32 -xpagesize=default -xlic_lib=sunper
f -I/opt/gnu/include -I/opt/local/include -I/usr/sfw/include -I/usr/include -c
conftest.c >conftest.out 2>&1
configure:26353: $? = 0
configure:26367: result: yes
configure:26377: checking whether gcc __attribute__ ((mode (XX))) works
configure:26398: cc -xc99=%all -c -g -xs -fast -fsimple=1 -fns=no -xtarget=ultra
T1 -xarch=sparcvis2 -m64 -mt -xipo -xcode=pic32 -xpagesize=default -xlic_lib=sun
perf -I/opt/gnu/include -I/opt/local/include -I/usr/sfw/include -I/usr/include
conftest.c >&5
"conftest.c", line 63: warning: attribute "mode" is unknown, ignored
"conftest.c", line 63: warning: attribute parameter "SI" is undefined
configure:26404: $? = 0
configure:26408: test -z
|| test ! -s conftest.err
configure:26411: $? = 0
configure:26414: test -s conftest.o
configure:26417: $? = 0
configure:26429: result: yes
configure:26439: checking whether gcc __attribute__ ((noreturn)) works
configure:26460: cc -xc99=%all -c -g -xs -fast -fsimple=1 -fns=no -xtarget=ultra
T1 -xarch=sparcvis2 -m64 -mt -xipo -xcode=pic32 -xpagesize=default -xlic_lib=sun
perf -I/opt/gnu/include -I/opt/local/include -I/usr/sfw/include -I/usr/include
conftest.c >&5
configure:26466: $? = 0
configure:26470: test -z
|| test ! -s conftest.err
configure:26473: $? = 0
configure:26476: test -s conftest.o
configure:26479: $? = 0
configure:26491: result: yes
Notice the tests for "mode", which I originally asked about here, issues a warning. But because it doesn't fail outright, it assumes it is supported. Why the others do not even issue a warning, I don't understand.
Thanks.
-John -
Error while running a BDC for the Transaction F-02
Hi,
I'm getting an error <b><i>"Parking not possible during Batch Input"</i></b> while running a BDC for the transaction F-02.
When i click on the error message it displays the message [b<i>]"In Customizing, you can control whether an error message is issued."</b></i>
How to solve this issue?.
Waiting for ur replies.........
Regards
N.SenthilHi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards -
Error while releasing credit block for the order
Hi all,
I am getting follwing error while releasing credit block for the order in VKM1
Incorrect index structure for table IVBEP1
Text
Incorrect index structure for table IVBEP1
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your SAP R/3 System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error.
But we are not transfering any orders to CRM.The order can be only seen in R/3
Please assist
Regards
ManoHi
KIndly check the oss note 505876 in may help you
Regards
Damu -
I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh LeThanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks -
An error occurred while applying SQL script for the feature BackendStore.
Hello,
I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
occurred while applying SQL script for the feature BackendStore."
I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
I executed the SQL Setup Wizard and upgraded any instance to 2012.
Please guide.
Thanks, Divyaprakash KoliPlease check you have enough disk space for the disk where the folders are.
Check view log for detailed log information.
The following link is a similar thread for you to refer:
http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
Lisa Zheng
TechNet Community Support -
BED, AED and SED for the excise item is zero
Dear ALL,
I am working on IMPORT MATERIAL GOODS RECEIPT,
While doing MIGO in excise item tab BED, AED, SED values are visible and material document is generated, but while posting PART1 ENTRIES through J1IEX System is throwing error" BED, AED and SED for the excise item is zero" and the excise values are not flowing in to PART1,
IN J1IEX PART1 Entries
1.IN DUTY RATE TAB all the entries like BED, AED, SED are zero,
2. IN DUTY VALUES TAB all entries are zero
ERROR MESSAGE NO 4F122
Please suggest
ARABBASDear,
Please check this,
[Excise;
[BED Value not defaulted in GR;
Sandip -
Save Query - An error occurred while creating connection strings for the query
A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.
I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.
Maybe you are looking for
-
When I attempt to play any saved items or a new one in Abobe tv the player appears but is a blank screen.
-
I have all my logic/garage band samples on a seperate HD. When Logic 9 in installed will I need to move all the content again to the seperate HD? Anyone know of a fast way to move all the sample content? Does LP9 work well with Native Instruments? Wi
-
How do I scroll illustrations that exceed the page height?
I have Digital Editions 4.? (It says 4.0 but it may be later,, I'm not sure). I'm using it to read an ePub book. Some illustrations exceed the page height and get truncated. I can't figure out how to scroll the illustration so I can see the entire th
-
My iphone 5 says activation error. why? how can i fix this?
I downloaded the ios 7 beta version with my friends and now a few months later my iphone 5 is saying activation error. i really need my phone back soon.
-
Premiere Elements 8 - Video Playback Problem...
Hi, I recently purchased Premiere Elements 8 and I have come across a problem which is really frustrating. Everything I drag one of my imported video files into the timeline and try to play it, the playback comes out all strange and distorted. I have