Watch this user - Moderators

Hi,
I have watching this user for quite a while. He is giving more points to a particular user. Please don't do this here after. It affects the enthusiasm of other user.
Don't encourage this kind of users.
answers plz
Re: Types of reports
idocs
ABAP Certification
Regards....
Arun.

Can you be a bit more specific on this?

Similar Messages

What happened to "Watch this user"?

Hello,
I used to be able to select "Watch this user" similar to how I can select "Watch this topic".
This was a great feature when I found someone who seemed to work on similar issues as I am.
Now I can no longer see that feature. What happened?
Thanks!

Craig and Mark,
Thank you both for replying. If I could I'd assign "Solved Problem" to both your replies but I can't. So I did the next best thing and assigned "Helpful Answer" to Craig's and "Solved Problem" to Mark's.
The only reason I gave Mark more is because it actually had instructions for how to do it.
Thanks again to both of you. I understand the privacy issue but I really miss the feature. I think it'll be hard to get people to turn it back on.
Oh well. It was nice while it lasted.
Message was edited by: David Pantich
How does notification about this kind of change get out to people? This isn't a minor change. Was there some notification and I just don't know where to look?

Another user of your computer is currently using this connection. This user must disconnect before you can log on.

Hello
I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
However, when I attempt to log in more than one user through RDWEB I receive:
Another user of your computer is currently using this connection. This user must disconnect before you can log on.
I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
Enable Multiple RDP Sessions
- Log into the server using Remote Desktop.
- Open the start screen (press the Windows key) and type gpedit.msc and open it
- Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
- Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
- Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
However, it did not solve the problem. Anyone have suggestions?

Hi Michael,
In addition you can try below registry setting for multiple remote session.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
fSingleSessionPerUser REG_DWORD 0x00000000
Note: By default the registry value is set to 1, but you need to change to 0.
Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to enable SAP* this user again ?

Dear Experts,
We are losing SAP*'s password in our sap4.7 system . and then we update the table record by following sql command :
update sapxxx.usr02 set bname = 'SAPBK' where mandt = 000 and bname = 'SAP' ;
commit ;
Of course , we changed the sap* password to 'PASS' sucessfully . But when we update the record again , we found that the SAP*'s password still being 'PASS' whatever we try to use 'SU01' to reset or update the sqlcommand again and again ....
Has someone can tell me how to restore SAP* this user to 'normal' status ? Many thanks ....
Best Regards,
Carlos Zhang

Hi!
Delete SAP* from usr02 table
delete from sapxxx.usr02 where mandt = 000 and bname = 'SAP*' ;
commit ;
2. Go to T code SU01 in 000 client and create user SAP* and make it copy of user DDIC.
Regards,
Vaibhav

APP-FND-01929: This responsibility has already been assigned to this user

Dear All,
While adding a new responsibility in the User Screen, I am getting the following Error:
APP-FND-01929: This responsibility has already been assigned to this user. Please eneter a different responsibility.
But in the list of responsibilities this particular responsibility is not added before..
What will be the cause of this problem..
How can I overcome this situation.. Please update...
Many Thanks in advance.....

Hi,
As per your other thread, I believe you have restored couple of tables from your backup and this is not supported. In order to have everything running properly, then a full database restore should be done.
Unable to login to application..
Unable to login to application..
Regards,
Hussein

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

Can't enroll device for user and this user account is not authorized to use Windows Intune.

Hello,
We have SCCM 2012 R2 inegrated with intune via an intune subscription. When I enroll a device with my admin account there are no problems, but when I want to add it with another user account which is a member of the Intune users collection, it can't be enrolled.
When I tested on https://portal.manage.microsoft.com with the credentials of the user I couldn't connect and received the following error: This user account is not authorized to use Windows Intune.
Do I have to do anything in the https://accounts.manage.microsoft.com as there is a checkbox saying Windows Intune. this is unchecked now for all the users even my own account on which I'm able to enroll a device.
Or is this a license problem? I know configuration Manager uses licenses for Intune but where can we track how many licenses are used and how many available? Is there some kind of report available?
I hope someone can help me
Kind regards,
Robben

I added them yesterday and this morning I was still not able to enroll a device with the added user his credentials.
The UPN is correct. Maybe I need to force the DirSync then? Or will one day of waiting be enough normally?
I can see the user in the intune management portal. Does this means it has been synced?
Another thing I noticed is the cloudusersync.log doesn't show them being added? What I was thinking is I first used the all Users collection in the subscription and afterwards I changed it to a specific collection with only the test users. Could it be that
they all synced already and the log doesn't show them anymore?
A warning in this log shows this also:
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
I don't know if that has anything to do with this?
this is an extract of that log:
CCloudUserSync::Process - User sync processing thread is now stopping.   SMS_CLOUD_USERSYNC   23/04/2014 14:59:42   8144 (0x1FD0)
SMS_EXECUTIVE started SMS_CLOUD_USERSYNC as thread ID 7684 (0x1E04).   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7572 (0x1D94)
CCloudUserSync::Process - User sync processing has started.   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7684 (0x1E04)
Starting user sync ...   SMS_CLOUD_USERSYNC   23/04/2014 15:02:15   7684 (0x1E04)
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:02:18   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:02:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:07:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:12:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:17:19   7684 (0x1E04)
Starting user delta sync, raise failure status messages = True   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Successfully removed users from cloud 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:19   7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:20   7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0   SMS_CLOUD_USERSYNC   23/04/2014 15:22:20   7684 (0x1E04)
kind regards,
Robben

I can not find firefox after it downloads. I keep getting a box that says I can't run it under this user, when I put in my user name and password it disappears

The download appears to work ,it extracts the files then a box comes up saying I can't run it as this user( with the name of my login),. gives me the option to check my login name or check administer with a password. I have tried both, I am the only administer on the computer. Using windows vista. I have searched and some of the things like turorials etc are on my computer but I can't get the actual browser to open and there is no shortcut for firefox. Currently I am using IE since chrome kept freezing up, so does IE.

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

Hello, I have this problem on updating applications on my iPhone 4s 5.1.1 i dont know if you can help me with. when ever i want to update an application on apple store i get a different user name then mine(slamdance@cracked.by) this user name is not mine

Hello,
I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
thanking you in advance for your kind help.

Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.

ACL is not enabled for this user OSX 10.5

I am running OS X 10.5 on a Mini Mac.
It was a clean install, everything went smoothly except for configuring the mail server.
I created my users as I normally do using Workgroup manager.
However 2 out of 3 of users I created can not log into the IMAP server.
You get the error message ACL is not enabled for this user.
What is the ACL and how do I enable it ?
Thanks
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

Hi there
I had the same problem and I found this post which fixed it:
http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
Hope it works for you too!
Chris

You can't send a message on behalf of this user unless you have permission to do so

Hi,
We are on Exchange 2010 SP2 with multiple domain name. All works ok. We need to be able to use other domains while sending email. For example, i have a default reply address set for [email protected] along with other addresses i.e [email protected] etc on
policy. I am receiving emails and can reply only using [email protected] I get the following error if i try to send email from [email protected]
[email protected]
You can't send a message on behalf of this user unless you have permission to do so. Please make sure you're sending on behalf of the correct sender, or request the necessary permission. If the
problem continues, please contact your helpdesk.
Users should have the ability to choose an address as they need rather that fixing to a single 'set as reply address'. I am sure it is possible. Can some provide some help/direction?
Thanks in advance.

Hi Byron,
Looked like a workable solution but could not get it to work. I am getting NDR with permission issue. I have created the distribution group with email address. Added the user in it. Given the user Full access and SEND AS permission.
Hi, I'm not sure what issue you are running into, but you can definitely give a user Send As permission for a group and then send as the group. I just verified in my test environment.
To assign the Send As permission, the easy way it in AD User and Computers.
Enable Advanced Features from the View menu first. This allows you to see the
Security tab.
In ADUC, find the group and open the Properties.
On the Security tab, Add the user.
With the user selected in the list, Allow the Send as
permission.
There may be a bit of lag time before that begins to work as Exchange may have cached some AD permissions, but it definitely works.
Byron Wright (http://byronwright.blogspot.com)

I can't use the (sort by )feature, or open the emages to watch this item - I used to be able to do this with firefox and all of the sudden it stopped working

I tried to log in :
http://uae.dubizzle.com/motors/used-cars/land-rover/range-rover-sport/?price__gte=&price__lte=&year__gte=2006&year__lte=2009&kilometers__gte=&kilometers__lte=&seller_type=&keywords=&is_basic_search_widget=0&is_search=1&added__gte=&company_item_id=&auto_agent=
I can't use the
- (sort by )feature Lowest to highest for example ,
- or open the emages to watch this item
I used to be able to do this with firefox the old version and now all of the sudden it stopped working,
I tried to clear cash & coockies & un install and reinstall fire fox but nothing works.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in firefox, but I like the controls in Safari better and want to stay with it.

Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in Firefox, but I like the controls in Safari better and want to stay with it.

Try deleting Flash cookies.
Flush.app – Flash Cookie Removal Tool For OS X | MacHacks.TV
If that doesn't help, UNinstall the old Flash plugin first, then reinstall new.
Troubleshoot Flash Player | Mac OS
Then restart your Mac.

How to Improve Adobe Flash Player to watch this video

When I wanted to watch Man City vs Chelsea live stream via http://footballity.blogspot.com/2013/08/man-city-live-stream-free.html , there is a message "You need to improve your Adobe Flash Player to watch this video" so anybody can help me..

Well going by your standards then the blackberry playbook is just as useless since there is no native contacts app or email app. If you want that you will also have to have a blackberry phone that is capable of tethering using the blackberry bridge app (if allowed by AT&T and Verizon since that would be another fee technically you might be charged for since you will be tethering your phone to you tablet).
Funny how I and many others are able to get by using the iPad and we don't have flash. The majority of people if the want to view flash will try Skyfire, iSwifter, Cloudbrowse, or will look to see if there is an app already dedicated to that thing you want to watch, like ABC Player or CNN.
Hey if doesn't work for you then it doesn't work for you. I am not trying to come off as an Apple fanboy, just trying to make sure you are informed about your product and what options are out there.
Would it be nice if flash was allowed native......sure. But it isn't so you can either get rid of the product, get an app that supports it (we are talking about spending $2 - $4) or go buy something else and hope your happy with it as well. You can't please everyone. Apple has chosen their stance and as you can see by sales numbers they aren't hurting. Infact i just read about a week or so ago on Gizmodo.com that alot of the other tablet making companies are cutting back on the number of units they will be making due to low sales or projected low sales (you can thank the iPad sales for that). Your one purchase isn't going to impact them that much. Instead, someone else will be standing in line behind you ready and happy to get their apple product.

Watch this user - Moderators

Similar Messages

Maybe you are looking for