Waveform Display in Timeline out of sync with Audio

This is only the case with one clip out of a capture, and happens on any sequnece I move the clip to. It was not previously the case as I used the waveforms to cut out off camera interview questions before. Now the waveform does not match the clip at all. Can anyone shed some light on this issue? Thanks!

trash your waveform cache and see what happens when you restart the program.

Similar Messages

Audio timeline out of sync with audio

I took an audio note using an iphone application called Moe's Notes. I emailed the audio as an attachment to myself. The note is in .caf format but I also generated an .aif version. I dragged the audio onto the timeline in Garageband and it plays, but I noticed that the audio is out of sync with the wave display. Also, the second part of the audio recording plays, but does not visibly show up as a waveform.
Any ideas? I resorted to Audacity to edit my audio.

trash your waveform cache and see what happens when you restart the program.

Just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?

just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?

Hi smokeondz,
Thanks for visiting Apple Support Communities.
If your iCloud calendar entries are not displaying as expected, start with the troubleshooting steps in this article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Best Regards,
Jeremy

Video runs slow on firefox and out of sync with audio with abode flash 12.

Ever since I installed adobe flash player 12 my videos run slow and out of sync with the audio it is like it pauses for a couple seconds and starts back working and keeps doing that.

Hi jth10,
The troubleshooting steps provided by Adobe can be found here: [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Windows_users]
* Are there any settings in the Flash settings manager that changed when you updated? [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html]
*These are the recommended settings for specific resolutions [http://helpx.adobe.com/flash-player/kb/poor-video-quality-flash-player.html]
You can also try to disable hardware acceleration in the Adobe settings menu.

Video out of sync with audio when using airphoil

Hey I was wondering if it was possible for me to use airfoil with a movie. It's just that there is a time delay in the sound there for the video and sound go completely out of sync.
Note: Airphoil is like using airtunes speakers.Airphoil is an app that allows someone to transmit sounds from any app to a bass station instead of just from iTunes.

Saad Attieh wrote:
It's just that there is a time delay in the sound there for the video and sound go completely out of sync.
yes, many users reported having made that same observation. seems like the app still needs some improvement. on the other hand, it may be a limitation of airtunes ...
JGG

Video playback on pc out of sync with audio

hello, play back on iPhone all ok but when I play it on my pc the video lags and the audio is out of sync.
heres the strange part. If i create a project with the video using iMovie and do not edit it at all and save it as 1080hd, that video plays on pc all ok

Q? Are you using Quicktime to play the video on your PC or other video player like Real Player?
As some 3rd party players may not sinc right or you may have to download a newer codec.
I use GOM player and it works well on my PC for video from iPhone 4S.
Hope this helps.
Greg

IPod Video out of sync with audio.

Hey guys.
I recently purchased a video ipod and was looking for ways to convert my videos & DVD's to work on my ipod.
So far I've done
cucusoft
psp9
videora
pqdvd
pocketdvix
quicktime (freezes up on my pc, and takes ages to convert)
and i've yet to find any way of stopping the audio and video from being out of sync (by anything from half a second to about 7 seconds) with one an other...
is there a program or technique I could use that will enable me to watch video that is in sync with the audio?
on a footnote, the quicktime does work but regulalarly shuts down on my computer and takes WAY too long to convert.
Please help me out here guys as I am reaching the end of my tether.
Thanks.
/\Ben/\

hi -- i've tried nearly all the programs you have, and have finally gotten the pq dvd to ipod video converter to work out of all of them. btw, the xilisoft one does NOT work, and i'm trying to get my money back from them, so buyer beware!
anyway, i found the issue to be the frame rate -- on movies, i was able to use 30fps successfully (worked for star wars, for example), but on native tv show dvd's (such as sex and the city) i had to use 24fps.
see if that works for you.

.3gp video is out of sync with audio, anyone have a fix or solution?

The sync is only on some clips. When I play the clips back in the QT player they are fine. Premiere CS5 is what I'm running. Is there something I am missing? The frame rate and audio match what QT reports.

You might want to explore some conversion programs, that will allow you to do batch processing. Personally, I use an older shareware program, DigitalMedia Converter 2.7 (Deskshare), but am on a PC, have not tried their newer versions, including their "Pro" version. There must be similar conversion programs available for your platform, that WILL allow you to load them up, make the necessary settings, and then batch the whole bunch. Doing it one at a time, for 50, would get my attention.
Good luck, and if you find a conversion program, that does what you need, with your source files, and then can do it in batch, please let us all know.
Hunt

Why is playhead out of sync with audio ? logic X 10.1

LPX 10.1 Playhead is ahead of actual audio, it is slight but enough to throw me off when looking at transient I want to edit, while playing back.
It does not play ahead in LP 9.
Late 2013 Mac Pro (trash can). Yosemite 10.10
when I set audio setting to internal it is still ahead coming out of trash can speaker so it is not interface.

If you are finding poor performance with LPX in Yosemite....
This 'trick' seems to fix it...
1) Open a terminal
2) Enter and run the following command, entering your password when prompted:
sudo nvram boot-args="debug=0x10"
3) Restart the computer
if that doesn't help then do the following instead...
1) Open a terminal
2) Enter and run the following command, entering your password when prompted:
sudo nvram boot-args="debug=0xd4e"
3) Restart the computer
I've been testing this (the first one) all day and so far it has worked very well indeed... but as always, such 'tricks' are used at your own risk...

Change of Video Frame One Sample Out of Sync with Correct Point on Timeline

Change of Video Frame One Sample Out of Sync with Correct Point on Timeline.
It has been found on the author's PC that, in Audition 3 in Multitrack View, a video file displayed in the video window will change its frame one sample later than it should do with respect to the correct point on the timeline. This has led to extra work having to be done by the author, as detailed later.
To demonstrate this issue:
Create a new multitrack session. Enable the Time and Video windows. Enable only 'Snap to Frames'.
Using an external program, render a two-frame video clip at 25fps. Let the first frame contain the letter 'A', and the second frame contain the letter 'B'. Making sure that the Display Time Format is set appropriately, in this case at 'SMPTE 25 fps (EBU)', lock this clip on the multitrack timeline, ensuring that the clip starts at time 00:00:00:00.
Create a mono audio clip of silence at 48kHz 32-bit that is two frames long. Lock it on an audio track, ensuring that the clip starts at time 00:00:00:00.
Place the cursor at time 00:00:00:01 and create a cue marker at this point by pressing F8.
Zoom into the timeline so that approximately twenty samples are visible, with the cursor lying on the cue marker in the middle of the screen. The Time window should display 00:00:00:01. The Video window should display the letter 'A'.
Move the cursor back in time (leftwards) by one sample. The Time window should change its display to 00:00:00:00, whilst the Video window should still show the letter 'A'.
Move the cursor forwards in time (rightwards) by one sample, so that it overlays the cue marker again. The Time window should change its display back to 00:00:00:01, whilst the Video window remains showing the letter 'A'.
Move the cursor forwards in time (rightwards) by one more sample. The Time window's display should remain at 00:00:00:01, but the Video window should now display the letter 'B'.
As can be seen from the above steps, the video's change of frame content occurs incorrectly one sample later than it should; the change of video frame content should occur simultaneously with the change of the frame number displayed in the Time window, which is at the point that the cue marker has been placed.
The practical effect of this issue is that it has caused the author a huge amount of extra work on an 89-minute long soundtrack-for-video timeline. There were over 1100 changes of shot which the author wished to mark by placing cue markers at the beginning of every shot. This should have been a quite simple process of enabling 'Snap to Frames', stepping through the video, and laying cue markers down by pressing F8 when the shot was seen to change.
Because currently the Video window (referencing the cursor laying over a cue marker
i that has been placed on the timeline using the 'Snap to Frames' option
) will actually display the end moments of the previous frame rather than the beginning moments of the current frame, laying down a cue marker when the shot is seen to change will actually place that marker at the beginning moments of the second frame of the new shot, not at the beginning moments of the first frame of the new shot, i.e. the cue marker placed will be one frame later in time than it should be. If it is wished for the cue marker to, as best it can, represent the beginning moments of the first frame of the new shot, it has to be manually repositioned so that it is at least a sample later in time than the time at which the shot has actually changed, in order for the Video window to correctly display the content.
The author had to manually reposition all 1100+ cue markers.
Ideally, the Video window should display a change of video frame in synchronization with the change of the frame display in the Time window, which occurs at the position of the 'Snap to Frames' point.
Part of the PC system's specification is detailed below:
Windows XP Professional Version 2002 SP3;
Adobe Audition 1.0 Build 3211.2;
Ad

obe Audition 2.0 Build 5306.2;
Adobe Audition 3.0 Build 7283.0;
ASRock 775dual-VSTA motherboard, BIOS Version P.3.00;
2.80 GHz Intel Pentium D Processor 915 2x2MB L2 Cache;
2GB DDRII 667 RAM;
Matrox G550 DualHead AGPx4 VGA card for Audition's two main work screens;
Matrox Productiva G100 MMS PCI VGA for two additional "static" information screens;
4 x PATA HDDs for OS & programs, swapfile & temp, project file sources, and guide audio;
Onboard Realtek ALC888 7.1 channel audio CODEC with High Definition audio;
Lite-On DVDRW LH-18A1P;
VIA OHCI Compliant IEEE 1394 Host Controller.
ASIO4ALL version 2.8;
Via Hyperion Drivers 5.16a - (VIA Chipsets INF Update Utility V3.00A, VIA PATA IDE Driver Package V1.90, VIA SATA IDE Driver Package V2.30A, AGP V4.60A);
Matrox PowerDesk-SE 11.10.400.03;
Matrox Millennium G550 Display Driver Version 5.99.005;
Realtek High Definition Audio System Software Version R1.91, Audio Driver Version 5.10.0.5605;
DirectX 9.0c March 2008;
Microsoft .NET frameworks 1.1, 2.0 and 3.0 with all service packs.

Slowness in the video's I view. The video is out of sync with the audio?

When I'm on a website that displays video and audio, the two are not in sync with one another. This constantly happens. Whether I'm watching a music video on youtube, or watching a discussion on yahoo finance, the problem is always there. Can someone explain why things are out of sync (video--audio) , and is there something I can do to remedy the issue? Thank you.

You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes
*http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Try to "disable the hardware acceleration" in the Flash Player.
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
See also:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
Flash "Display settings" window:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

IDE suddenly gets out of sync with dbx

I recently have seen a few cases where, during debugging sesions, the IDE gets out of sync with dbx: while sitting at a breakpoint, the debugger toolbar buttons suddenly are greyed out with the exception of the "Pause" button, as if the inferior process were running. A message "Process state modified" is displayed briefly in the status line at the bottom. I suspect this may be due to a problem with balloon evaluation, because somehow it seems to be triggered by cursor motion.
It is possible to "rectify" the situation by issueing a "next" in the dbx console, after this, the debugger toolbar buttons revert to their normal state.
I will try to narrow this down further. Is there anything I can do which could help to find the problem?
This happened with Sunstudio Express 07/08 as well as with 11/08.

I finally managed to reproduce this reliably. This was confusing at first because it does not only involve certain C++ code, but also the dbxenv variable output_dynamic_type.
This is indeed a balloon evaluation issue: If the mouse pointer hovers over an expression which involves an overloaded "operator->()", I usually get a balloon saying "<contains function calls>, which is okay. If I set "dbxenv output_dynamic_type on", I get the same output, but the toolbar switches somehow to "running" when the balloon pops up.
I can reproduce this with just a dozen lines of self-contained C++ code.
I will report a bug at bugs.sun.com.
BTW: could anybody please set the timeout value for posts and replies in this forum to a reasonable value? This reply took me only a few minutes, but when i actually posted the message I got a timeout response...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

I too have the same problem. The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video. Apple needs to fix this!!!!!!!!!!!!!!!! its a joke, my iphone is all messed up after the last update as well. at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues. Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!, there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem.

IPhone out-of-sync with Exchange after performing inbox search?

Hey everyone,
I work as an IT technician for an Enterprise where the majority of end-users utilize iPhones (4 and 4s) and iPads (all versions) with varying versions of iOS. Many of these people have ActiveSync set up with our Exchange Server (2008RS, Exchange 2010). We have received a pretty consistent amount of user complaints for a while where end-users' iPhones will [seemingly randomly] become out of sync; i.e. they delete an email on their iPhone and their Outlook doesn't reflect this for hours or visa-versa.
We have traced this down to indexed searching with the iPhone. In a nutshell, if an end-user tries to search their inbox for an email using the search feature, this is when everything becomes out-of-sync with Exchange. The workaround is restarting the phone (for some reason restarting the Mail app doesn't help).
I am curious if anyone has more information around this or perhaps a fix so we're not having to tell people (namely Executives and VIPs with larger inboxes...thus searching is used more) to restart their iPhones all the time.
I thank each of you in advance for any advice you may have. Thanks!
-Ryan

Hi mehrardt,
It does sound like the exchange email account has to be removed from the iPhone and then added again.
If he has another personal email account on the iPhone, you can have him delete the exchange account and then tap a configuration profile that you emailed him.
The iPhone Configuration Utility available here: http://www.apple.com/support/iphone/enterprise/ will let you create a configuration profile with certificates, which you can email. The receiver would just tap the profile and it would configure the iPhone.
-Jason

When I watch my tv shows in itunes, the people's voice is out of sync with the picture. any suggestions???

When I watch my tv shows on my mac computer thru itunes, the voice is out of sync with the picture. any suggestions???

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Waveform Display in Timeline out of sync with Audio

Similar Messages

Maybe you are looking for