Wbs element can no longer be shifted error while creating wbs

i am trying to create wbs with bapi_project_maintain, i am facing an error with message no 418 WBS element 1899-CAP-10-100-001-1507 can no longer be shifted

- You tried to change the hierarchy of the project, despite the fact that some budget has already been assigned. Try to add the WBS to another node or place in the project hierarchy.
- You could also reset budget using transaction CJ30 and remove the availability control on the project using transaction CJBW.
Regards,
Raymond

Similar Messages

Error while creating WBS element.. regarding source structure

I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
What shall I check? what could be the reason?
Thanks,
A

hi,
In this IMG activity, you define the source structures used when settling and costing joint products.
A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
Just consult with your CO Consultant...
Venkatesh

BAPI_BUS2054_CREATE_MULTI error while creating WBS Element

Hi Gurus,
I am trying to create WBS element by using BAPI_BUS2054_CREATE_MULTI
but bapi raise an error that I can not understand.
in return table I got the following error with the error code CJ - 021
" XXXX-YYYY-ZZZZ WBS Element does not exist "
But I try to create already? What does 'Does not exist' mean?
By the way I am using
CALL FUNCTION 'BAPI_PS_INITIALIZATION'. before using BAPI_BUS2054_CREATE_MULTI
thanks in advance, it is an very important
Mehmet Ali

Hi.
I have the same problem. Have you solved?
Thanks.
Angie

Error while Creating WBS element using BAPI 'BAPI_BUS2054_CREATE_MULTI'

Hi Expert,
I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'
CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
    EXPORTING
      i_project_definition = g_pdwbs
TABLES
    it_wbs_element             = it_wbs_element
   et_return                  = it_return
EXTENSIONIN                =
EXTENSIONOUT               =
    CALL FUNCTION 'BAPI_PS_PRECOMMIT'
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
When I do so I am getting the below errors. Please suggest.
"Individual check for creating the object WBS Element C-497082 required ".
"Individual check for creating the object WBS Element C-497082-0001 required".
Please suggest how to correct this error.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 18, 2008 5:25 PM

I am getting the same error, but I cannot figure it out how to detect it and fix it. Will you please share your solution?
Thanks,

Error while creating WBS through BAPI

I am using BAPI_PROJECT_MAINTAIN to create WBS L2 & L3.
There is only 1 WBS at both levels.
For some cases it is running fine, but I am getting the following error in some cases:
"WBS element 3UTWB_BSRHT_001 can no longer be shifted"
What could be the reason?

As you told you are creating WBS vai BAPI. This may not be exact relevant Normally you cannot change hierarchy of WBS Elements after you have done some sort of execution / planning on it. If you are getting error than please share details of error message with no.
With Regards
Nitin P.

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

The context has expired and can no longer be used errors making farm unusable

There are a couple of other posts on this forum about the message "The context has expired and can no longer be used" but they all suggest something related to time and time zone differences. This is not the case in my farm and I have disabled
the security checking of requests on my web applications. Hopefully someone at Microsoft is very aware of this and is working to resolve it because my farm and many others are unusable like this.
I have dug through all of the ULS errors when it happens and there is nothing useful. It barely even registers as a message although, I have not turned on verbose logging, which I am about to try. I have SP 1 installed. Just to be clear, this is happening
on SharePoint 2013 Enterprise.
I have been fighting this for a month. I can add a few things about the farm I am trying to fix:
1. It was a WSS 3.0 farm that when through a 2007-2010-2013 migration in short order.
2. I believe it is under-powered on the hardware side. All VMs on a host shared with 40 other VMs, some fairly busy. Here's the virtual farm breakdown:
-1 WFE with 12GB RAM and 2 cores
-3 app servers with similar resources
-No paging file on C: on any VM. This is a decision by sysadmin. Paging on D: is system managed. Probably irrelevant.
3. Rapidly clicking from link to link seems to bring on the failure much sooner.
Any suggestions even about how to troubleshoot this would be appreciated.

Ultimately, I think it is a time sync issue across the farm. We still have request management off on all boxes because I cannot get the admins to resolve this issue but, in my lab environment I ran into a similar thing.
I may turn RM back on later to see if it comes back but here's what I think happens: In production we have 2 ESXi hosts and our SP environment is all AD (of course). The clocks are all out of sync, sometimes beyond 5 minutes. (The time sync for AD is something
I believe a lot of admins don't understand when running virtual.)
If you allow ESXi to try to sync the time for all guests you run into problems. Maybe they are more pronounced with SharePoint. Anyway, VMware and AD start fighting over the time (check your event logs) and, for us, the clocks across the domain get out of
sync beyond the 5 minute allowable window.
I recommend disabling time sync from host to guest and do what MS recommends: make your domain controller the master time server and configure it to get its time from a reliable source (which can be a single hardware host over NTP). Make other domain controllers
sync from the PDC. The other windows machines will all sync to the domain when they log in. This will prevent SharePoint from issuing tokens from one machine that are out of sync time-wise with the other machines and thus throwing the "Context has expired
and can no longer be used" errors.
Note that disabling host to guest time sync is not as simple as just clearing / un-checking the box in the VSphere client. That doesn't do it. You will need to Google for the 6 or so custom properties you must add to each guest to prevent VMWare from re-synchronizing
after certain hardware events.

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

I recently accepted an automatic update to pages on my MacBook Pro. I can no longer open pages or documents created through the older version of Pages......Any suggestions?

I recently accepted an automatic update(January, 2014) for Pages on my MacBook Pro. I can no longer open Pages or documents created with the prior version. Any suggestions as to how to correct this problem?

Open Activity Monitor. Select All Processes instead of My Processes at the top and then reorder everything by highest CPU usage. Take a screenshot and post the image here.

Error while creating/changing/desplay cost element

Gents
Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
Table CI_CSKB is not an active table
Message no. AD 228
Kindly help me to get the resolve this issue.
Thanks and Regards
Vinay Thakre

hi
In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
Thanks
plz award points if helpful.

Heap space error while creating XML document from Resultset

I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
    throws ParserConfigurationException, SQLException {
        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
        DocumentBuilder builder = factory.newDocumentBuilder();
        Document doc = builder.newDocument();
        Element results = doc.createElement("sims");
        results.setAttribute("bank", bankId);
        results.setAttribute("record_type", "HEADER");
        results.setAttribute("file_type", interfaceFileType);
        results.setAttribute("version", version);
        doc.appendChild(results);
        ResultSetMetaData rsmd = rs.getMetaData();
        int colCount = rsmd.getColumnCount();
        String columnName="";
        Object value;
        while (rs.next()) {
            Element row = doc.createElement("rec");
            results.appendChild(row);
            for (int i = 1; i <= colCount; i++) {
                columnName = rsmd.getColumnLabel(i);
                value = rs.getObject(i);
                Element node = doc.createElement(columnName);
                if(value != null)
                    node.appendChild(doc.createTextNode(value.toString()));
                else
                    node.appendChild(doc.createTextNode(""));
                row.appendChild(node);
        return doc;
public static void write(Document document, String filename) {
        //long start = System.currentTimeMillis();
        // lets write to a file
        OutputFormat format = new OutputFormat(document); // Serialize DOM
        format.setIndent(2);
        format.setLineSeparator(System.getProperty("line.separator"));
        format.setLineWidth(80);
        try {
            FileWriter writer = new FileWriter(filename);
            BufferedWriter buf = new BufferedWriter(writer);
            XMLSerializer FileSerial = new XMLSerializer(writer, format);
            FileSerial.asDOMSerializer(); // As a DOM Serializer
            FileSerial.serialize(document);
            writer.close();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        //long end = System.currentTimeMillis();
        //System.err.println("W3C File write time :" + (end - start) + " " + filename);
    }

you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Error while Creating form on remote Database

Hi All
I m getting error while creating form on remote database thru
Database link
Line/Column Error
7099/21 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7099/9 PL/SQL: SQL Statement ignored
7749/16 PLS-00454: with a returning into clause, the table
expression cannot be remote or a subquery
7749/9 PL/SQL: SQL Statement ignored
and statement at line specified is insert statement. and at end
of insert statement Returning caluse is there as follows
RETURNING ROWID INTO "_ROWID";
This returning clause is causing error. Does anybody knows how
to handel it??
Thanks
Yogesh

Yogesh
I haven't seen the ora-03116 problem.
What version of Portal are you running? Are the databases at the same version? Does your table have longs or anything strange in it?
Can you query the table via the synonyms and link in sqlplus as the application schema? This is a good test because it eliminates Portal.
You should try setting up synonyms etc for the emp table. If you still get the problem then Oracle may be able to replicate it. If not, then there's sth funny about your table maybe.
I agree with Vishnu about creating everything in sqlplus. I create all my links and synonyms in sqlplus. They are all public. I have 2 synonyms: one takes you over the link the other takes you to the right schema. It's flexible and it works.
data database: D grants to P (local schema) on table T
public syn T = D.T (sys) (get the right schema)
portal dbase : public db link to data database connecting as P
public syn T = T@dblink (sys) (over the link)
P is a schema created in both databases.
Test is: P in portal dbase can "select * from T" and gets the right data.
I never, ever refer to a schema when defining a form. ie. never P.T or D.T or whatever. I always refer simply to a synonym. For the above my form would be defined simply on the table T.
Hope this helps
Greg

Wbs element can no longer be shifted error while creating wbs

Similar Messages

Maybe you are looking for