WBS element does not belong to business area(Message No: CJ067)

Hi All,
While doing Billing through DP91 by giving the Sales Order No.,
it is giving the error "WBS element *****does not belong to business area** ".
The configuration between Business Area and Plant in Enterprise Structure level is fine.
Do let us know anything else need to be done to resolve the same.
Needless to say that helpful replies will be awarded points.
Best Wishes & Regards,
Raj Kumar Reddy.

Hi Chandra,
Business Area was given both in CJ20N and Sales Order level.
Also both these business areas are same.
To be more clear:
Say in the error it has mentioned the business area as 'X'.
But in Sales Order and Project level, 'Y' has been maintained.
System is throwing 'X' error, because the same is maintained under Cost Center level.
I cannot change the business area in Cost Center to 'Y' because of my business restrictions.
Regards.,

Similar Messages

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Cost element does not exist in CO

Hi SAP folks,
In new co code we have copied GL codes from co code 1000. Now while changing cost element in KA02 system gives error message like "Cost element does not exist in controlling area". Why this error message is comming, however all cost elements are automate come from co code 1000....right....how to solve this issue...please anyone do help.....
how to copy cost elements to new co code from co code 1000 and How to extend existing cost centers to new code. Ex: co code 1122 has 3 cost centers and we need to extend the same to co code 1123. Controlling area is same for both co codes.
Thanks

Hi Eli,
Really, i appreciated for your help.
But, still my question is not to be answered. I am giving entire picture what i have done earlier.
1. I have copied 2 co codes(CACA & CACB) from 1000 co code
2. I have created new chart of a/c (CACA) and assigned to co codes
3. I have co area as INT and assigned to co codes
4. I have copied gl codes to 2 co codes from 1000
5. I have created 5 cost centers newly in 1 co code area
Here my question is:
- We need to extend same cost centers to another co code
- When i am changing cost element, system gives error like no CE in co area..why? and how to resolve?
Thanks

Adoble photoshop elements does not recognize printer although other software programs do print...

Adobe Photoshop Elements does not recognize printer..error message says you must install printer. Other software does print documents.

Try opening an image in full edit, then press crtl+p
Wait for the print dialog to open and try to select your printer by clicking the dropdown menu.

MIGO ERROR:- 10020 ORD belong to business area 1111 not 1112

Hi All,
I am facing an error while doing MIGO for an import PO. Error is below:-
10020 ORD belong to business area 1111 not 1112
Message no. KI188
Diagnosis
Account assignment object 10020, type ORD is assigned to business area 1111. You made an explicit assignment to business area 1112.
System Response
The posting row may contain only one business area.
Procedure
Perform one of the following actions.
Make an explicit assignment to business area 1111. To do so you must set the "Business area" field as entry-ready in Customizing.
Enter an account assignment object assigned to business area 1112.
Change the assignment of 10020 to business area 1111. Note the document number and continue processing the document after changing the assignment.
Interesting thing is that when doing MIGO in Dec 2010 not getting any error but when doing in Jan 2011 getting above error.
Pls help
rgds
Awnindra

Hi Dear,
I feel that I have seen this problem before, can you please try to change the Controllin area in the SAP and then proceed with the T-Code.
It might solve your problem..
Regards,
Yawar khan

When I am trying to sign in to iTunes Store. I am requested to enter a password to the wrong Apple ID mail which does not belong to me... I can't connect to iTunes store and my Viber and Facetime are not active.

My Apple ID was disabled. I reseted it successfully. Afterwards, when I am trying to update the pending apps in App Store on my phone, in order to sign in to iTunes Store I am requested to enter a password to the wrong Apple ID which definitely does not belong to me ('[email protected]'). Of course, I don't know this password and, consequently, I can't connect to Itunes Store on my Iphone. As a result my Viber and Facetime are not active in the meanwhile. What should I do? Thanks in advance for kind help and solution.

Where did you get this iPhone?
Was it new or second hand?
You have to sign out then sign in with the correct Apple ID and password.
Settings > iTunes & App Store > Apple ID: > do it here.

V_T011 - You are changing a function group which does not belong to you

I've read some posts about my problem I report here, but have not found the solution.
In transaction SE54 -> V_T011 -> Generated Objetcs -> Create / Change I can not save the data transport details dialog for standard recording routine.
The warning "You are changing the function group Which does not belong to you" is shown. The change is not saved.
Can anyone help me?
Thanks

I would like to change the DIALOG DATA TRANSPORT DETAILS:
Actually is configured with the option no,or user, recording routine. I want to save to Standard recording routine.
Thanks,

Note 123383 You are changing a function group which does not belong to you

Applying note 123383. Got SSCR keys from SAP to modify the identified tables.
When trying to save changes, get error message "You are changing a function group which does not belong to you".
I changed Function Group ownership to myself, but still get error message.
Anyone have an idea how to resolve?

Just in case... did you do the following?
"If, when you are maintaining certain views, the error message DS138 'Changes prohibited by user ... ' or error message EU522 'Changes to ... are prohibited by ... ' is generated, remove the <b>editor lock</b> from programs L0GFNTOP and L0GFPTOP as described in Note 37900."
~Suresh

I have a page showing up when I run my Keynote presentation that does not belong there and is not in the navigation area-how do I remove it?

I have a page showing up when I run my Keynote presentation that does not belong there. It's not in the navigation area so there is no obvious way to delete it—how do I remove it?

Not sure if these will help... In the navigator view, is there a triangle next to the slide that appears before the slide that does not belong? If so, click it and you might find the extra slide in there. Or try View Menu:Light Table and see if you can find it in there.

Hierarchy could not be included; root element does not exist ?

hi,
I try to change hierachie for the released WBS with function CN2W_WBS_HIERARCHI_CHANGE_STRU, but I got an error like : "Hierarchy could not be included; root element does not exist" But this does not happen when we change the WBS hierachie in CJ20N, Could you please help me how to change hierachie for the released WBS using the function ? And Which function I can use ?
Thanks in advance

you are using correct function module. Just check the values in Up and down columns .

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

Hi,
To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
Give the datasource name, then the database name.
You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
It will be like this <service name> <portnumber>/tcp
Hope this helps...
best wishes,
Nish

I'm trying an email address i know is mine yet still getting this message:"That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."

I keep getting this message: "That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."
I'm trying to create a new id and e-mail using an e-mail address that is mine and has been mine for over a year - any ideas why this could be happening?

Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums.

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

"Domain Users" group in Active Directory does not belong to any Group Membership in LC

Active Directory user belonging to "Domain Users" group does not belong to any Group Membership in LC, why does it not belong to "Domain Users" group?
Any way to correct this issue, without changing group membership on AD side?
If Active Directory user is member of "Domain Admins" or "Users" then these show same group membership in LC.
Thanks.

If you want to use the Domain Users group for the purpose of representing all the users then you can use the "All principals in domain xxx" group which is created by UM.
Coming back to Domain Users group. For determining group membership in AD UM uses "member" attribute of the group object. "Domain Users" group is treated differently by AD. It is the default primary group for all the users and normally members of the primary group are not specified using the member attribute.So when we sync the data from AD "Domain Users" membership does not get completed.

WBS element does not belong to business area(Message No: CJ067)

Similar Messages

Maybe you are looking for