WCF-SAP Adapter throwing errors after SAP Upgrade from ECC 5 to ECC6 Release 640 to 700

Hello Everyone,
We were able to communicate(Send and Receive Idoc's) to SAP via WCF-SAP Adapter in BizTalk 2010.
SAP Servers were upgraded to ECC5 to ECC 6 and we started facing below issue communicating on send and receive both.
I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDP01006GRP   IDOCTYP: ORDERS05
Release: 700    CIMTYP: . Ensure that your message xml validates against the operation schema.
Server stack trace:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.
Thanks,
Vikingss

I am aware that there is a hotfix available but that is more on the Receive Side from SAP. Nevertheless I installed the hotfix but issue still persists. Any suggestions will be highly appreciated.
For this issue, you can contact Microsoft support directly(http://support.microsoft.com).

Similar Messages

Jco call rfc throws error after WAS upgrade sp15

Hi all.
When 2 days ago, our WAS engine version is sp14.
And we have one application using jco library to connect to SAP R/3. It works well.
After we upgrade WAS to sp15.
This function throws out the error.
Umrechnungsfaktor konnte nicht bestimmt werden
Is there anybody can help me ? Its very urgent !

Hi
A)Go to adming page http://<localhost>:<port> >>click Web Dynpro >>Content admin >> create, maintain, test Jco and also you can Test the SLD connection too
B)If you are using any JDBC driver,Check your JDBC driver is registered. or else you have register it
1. Start the Visual Admin tool
2. In the tab Cluster, open the node of the server you want to check.
3. Open the node Services under the server you want to check.
4. Click on the entry ClassLoader Viewer under Services. 5. The components are displayed in the right window. Open the node Applications in the right window.
6. Look for the entry sap.com/com.sapportals.connectors.database and click on it.
Under sap.com/com.sapportals.connectors.database, your JDBC driver should be available
Cheers
Jawahar Govindaraj
PS: Reward points

Upgrading SAP ESS and MSS after HR upgrade in ECC 6.0

Hello
I am new to SAP netweaver.
Our landscape has an ECC 6.0 system integrated with EP 7.0.
We recently upgraded our SAP HR from 600(SP 48) to 600(SP61) and EA HR component from 603(SP 22) to 603( SP 35).
After the upgrade we came to know that the portal users are facing some issues with Etime application on portal, i did a bit of searching and found that we have to upgrade SAP ESS, MSS and ERP5COM components. (http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES)
My questions are:
1) Can we directly apply SP's for ESS, MSS and other components as i cannot find any prerequisites required to be met before they have to applied?
2)If we have ESS SP 04 and the required version is ESS SP07, can we directly apply SP 07 or we have to first apply in a sequence SP05, SP06 and then move to SP07?
Thanks a lot!
Varun

Hello,
1) If a developer modified the ESS/MSS package, you need to ask the developer before you apply the patches. In this case, you find the "local version is modified" text in the corresponding package.
2) Java Patches are cumulative, which means that higher Patch contains all corrections of lower Patches.([SAP Note 1249886|https://service.sap.com/sap/support/notes/1249886])
Laszlo

Error after SPS upgrade from SP10 to SP12

Hi Friends,
Recently we have done SOLMAN 7.1 sp upgrade from sp10 to sp12.
Now I want to perform configuration activities in SOLMAN_SETUP.
But when I am trying to do SYSTEM PREPARATION, I am facing error in first step(Maintain Users).
"Error: Number of elements in the collection of node COMPONENT CONTROLLER.1.NAMESPACES violates the carnality".
Kindly suggest me how to clear this above error and proceed further. Further please let me know as a SOLUTION MANAGER consultant what are the steps I need to perform post SP upgrade. I am not BASIS guy. So please let me know what are the activities which need to be performed by BASIS guy and SOLMAN guy
Please find the attached screen shot for the error screen.
Thanks & Regards,
Solman Starter

Go the transaction STMS, if a window appears when you start the transaction that's mean it is not configured.
Only in this case :
1.     Logon on to client 000 with DDIC.
2.     Execute transaction SE06
3.     Select the Database Copy or migration option
4.     Press the Post-installation Processing button.
5.     When prompted Do you want to re-install the CTS? Press the Yes button
6.     When prompted for the Source System of Database Copy?, make sure that the <SID> of the production system is selected. Press the checkmark button to continue.
7.     When prompted Change originals from PRD to QUA?, press the Yes button
8.     When prompted Delete TMS Configuration?, press the Yes button
9.     When prompted Delete old TMS configuration?, press the Yes button
10.     When prompted Delete Old Versions of transport routes?, press the No button
Concerning the initial problem, i found this note :
http://service.sap.com/sap/support/notes/2025884

BizTalk : MQSeries adapter throwing error after 30 minutes idle time

We have BizTalk and windows MQSeries on separate servers. As long someone logged on to MQseries server, BizTalk able to communicate with MQSeries server and able to receive and send messages to MQs. If there is no session active on MQSeries server,
after 30 minutes BizTalk strat throwing following error. Once you log back to MQSeries server, it will work 30 more minutes.
Error: The adapter "MQSeries" raised an error message. Details "Retrieving the COM class factory for remote component with CLSID {....} from machine 192.... faied due to the following error : 8000401a 192....
Has any one encountered similar issue?
Thanks,
Chirag

Hi,
This seems to be permission issue. Please refer the similar thread
http://social.msdn.microsoft.com/Forums/en-US/biztalkgeneral/thread/13427a41-edd7-45fc-9d43-69838720d923
http://www.biztalkgurus.com/biztalk_server/biztalk_2006/f/10/p/5085/26750.aspx
Hope it can help you

Increased number of journal receivers after upgrade from ECC 5.0 to 6.0

After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

SAP Upgrade from ECC 5.0 to ECC 6

Hello All,
We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
Thanks in advance for your response
Anirban

Hi,
It has to be manually done for each and every program.
Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
Regards,
Subramanian

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

Hi All,
After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
I found the error in below code..
CALL METHOD cl_abap_container_utilities=>read_container_c
      EXPORTING
        im_container           = j_2iextrct-extrctdata
      IMPORTING
        ex_value               = i_rg23part2-i_part2_typ
      EXCEPTIONS
        illegal_parameter_type = 1
        OTHERS                 = 2.
i_rg23part2-i_part2_typ-EXAED = 0.<0
i_rg23part2-i_part2_typ-CESS   = 0.<0
for some packed fields special characters are appearing, which leads to a short dump.
Any Suggestions.....
Thanks,
Satish Reddy.
Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

HELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07

Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.

I have resolved it by applying stylesheets and clearing the cache.
Thanks,
Jayaprakash Tedla

Database.LoadDataSet() method throwing error while retriving data from IBM DB2 database

Database.LoadDataSet() method is throwing error during retriving data from empty table of IBM DB2 database. It is giving error code "SQL0100W".
“Error Message: 0NO_DATA [02000] [IBM] [DB2 / NT] SQL0100W FETCH, whether there is a line to be UPDATE or DELETE, or of the query result is an empty table .
SQLSTATE = 02000”

Hello SharayuPandit,
For issues regarding DB2, i suggest that you could post it to DB2 related forum:
https://www.ibm.com/developerworks/community/forums/html/forum?id=11111111-0000-0000-0000-000000000842
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but

Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it. The program is buggy...need an update/revision quickly!!

If you're on Windows, check out a free program called Audacity--it's fantastic. With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,

After MAR upgrade from 4.0 - 7.0 login to ars_db fails

Hi,
After MAR upgrade from 4.0 -> 7.0 login to ars_db fails with the message "inconsistent database structure". For me it is a bit weired to do the ars_db upgrade to 7.0 SP4 and then start the transport agent which is still in the 4.0 level but this is the way it is described in the upgrade guide in order to delete Blobs after MAR upgrade.
Is the guide here inconsistent? Don't we have to upgrade the tools and services first before deleting Blobs?
Did anyone experience similar issues?
Regards
Whity

Hello Whity
After upgrading the MAR,To upgrade the MRS Tools and Services follow the steps below:
1. Stop and uninstall the 4.0 Transport Agent Service. Use the Transport Installer to
uninstall the above services.
2. If you are not able to uninstall the TA, uninstall the service manually using the following command sc delete [service name]
.Also check that there are no entry for that service at the registry location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
3. On your local copy of the Upgrade DVD open the folder Mobile_Client_Upgrade\UpgradePurposeOnly . If you upgrade from CRM 4.0 you have to run SETUP.exe. If you upgrade from a higher release you have to run UPGRADE.exe
4. Install the Transport Service again after MRS tools and services are upgraded to 7.0 SP 04.
In your case, TA was not uninstalled pripr to the MRS tools and servcies upgrade.Hence you still see 4.0 TA. Please follow the above steps to solve the issue.
Please refer to the section 5.2.7 section of the upgrade guide document for more information.
Regards
shankar

Iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help

Hi everybody,
iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
It gives me an option to choose a domain but when I go to "sites" it doesn't recognize none of them.
Thanks :-)

In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

WCF-SAP Adapter throwing errors after SAP Upgrade from ECC 5 to ECC6 Release 640 to 700

Similar Messages

Maybe you are looking for