WCS - Time of day access to vlans
I am running a 4402 controller, wireless location device and WCS. I have setup a Guest Vlan that is restricted with a ACL. Is there a way to restrict / turn off the Guest Vlan during certain hours of the day? Either through the WCS, controller or our 6509 Router? Any thoughts on this one are appreciated.
Hi Daniel,
You can set "time based" rules on the ACL that will restrict when access is permitted;
Access Point ACL Filter Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058ed26.shtml
Hope this helps!
Rob
Similar Messages
-
ACS - Cannot get Time-of-Day Access Settings to work
I have set up ACS to control access to my local LAN users who connect to the network via c2950 switches.
I have configured the default Time-of-day setting to stop local LAN users logging in before 7am, I have followed the instructions in Cisco documentation but it still fails to deny access before this time. Can this be achieved or am I doing something wrong?
ThanksIve tried to reproduce this on 3.3 and I can't.
Try disabling all hours, ( Clear All button ), If that does manage to stop access then it certainly looks like a timezone issue.
If the previous test does cause users to be denied accsss?
Reset the Time restriction to what you want and
Enable Passed Authentication log via System Configuration Logging
Then to an authentication prior to 07:00 and check the time stamp in the passed authentication log. -
Wireless 5508 controller - Guest Wlan time of day restrictions ?
Looking to add time of day restrictions to our Guest WLAN that is currently in its pilot phase.
Is there a way to config time of day access to a WLAN ?
Any help would be appreciated.
Cheers
DaveDave,
There is nothing in the controller that allows you to do this... However you can achive this in a few manners..
1) Time ACL on the vlan. But your guest ssid will still be shown.
2) If you have WCS you can schedule a WLAN enable/disable with a template. This is what some of my customers use. They will create a template that triggers at 6pm to disable the wlan and at 7am enable the wlan.
I hope this helps. -
After updating my iPad I have to restart it two or three times a day to access my mail or the internet. Why?
My wife has not updated her iPad yet and no problems with mail or internet. This leads me to believe it's not a router or provider problem but a problem with my IPad.Try a reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that didn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter the Wi-Fi password.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections -
Help! I need to restrict wired access by time of day to limit XBOX 360 use
AirPort Extreme N allows timed access restriction for wireless clients, but Apple bewilderingly decided not to make this feature available to "wired" clinents that access the network via ethernet cable. *This permits our teenagers to play XBOX all night long.* HELP! Which third-party vendor makes wired routers that I can use to restrict this access by time of day. NOTE: I will need a router that still supports AppleTalk over ethernet to keep my HP LaserJet working. I tried a LinkSys router but it killed the AppleTalk packets and wreaked havoc with print jobs sent to the HP. I also want to keep the AirPort Extreme N in the network and use it as the sole DHCP server (I specifically need its ability to reserve private IP addresses for some devices), so this complicates where in the network I place the third-party router. Where should this router be, if I need the AirPort Extreme N to serve as DHCP server, and do I need to change any other setting like bridge mode, etc? _I just can't believe Apple would only allow timed access restrictions for wireless clients._ Come on! Maybe this will be fixed in a firmware update?
Thanks, Duane. I was just looking at the PDF instructions for this router, and it offers extensive control of wired time access by IP number.
So: If I (1) put this Belkin device at the top of my network chain, between my cable modem and my AirPort Extreme; and I (2) turn off the DHCP server in the Belkin device but turn on the DHCP server in the AirPort router; and I (3) use the AirPort Extreme to assign a reserved IP adddress to the XBOX; and I (4) use this reserved IP address to restrict the XBOX access by time of day via the Belkin router software... Everthing will work OK?
Seems awfully complicated. Basically, I would be using the Belkin router only as high-octane network switch -- one that permits timed access resrictions for devices at specific IP addresses (and handshakes with the cable modem to provide a unique MAC address to the cable company). Right? -
Setting Time of Day users can access the system
This has probably been asked and answered before but please bear with me, I'm new ...
Is there a parameter that can be set to limit the time of day that users can login to the system?Hi,
an option is to shutdown the user related services (like the report processing servers) using O/S scripts for a given time period.
Regards,
Stratos -
Cisco RV120W crashed several times a day
Hello,
we are using the Cisco RV120W for our little network. The latest firmware (1.0.4.10) is installed!
But the router crashes about 6-10 times a day and have to be restarted. The Web Interface is also not available then.
It is configured as the subnet 192.168.12.0/24
The WAN connection is a static ip to a public subnet.
VLAN 1 is the default LAN (see above).
DHCP is enabled in that network and DNS proxy is disabled.
VLAN 2 is 192.168.10.12 whitout DHCP.
Ethernet Port 1 is configured as VLAN 2 for another subnet (192.168.10.0/24 from another router).
The other ports an WLAN are using VLAN 1 (192.168.12.0/24).
WLAN authentication is enabled (SSID 1) with a WPA2-PSK password.
After i reboot the router the logs are empty and i just can see the logs while the router is running.
after about 30 minutes i copied the logs from the router:
These are the "error" logs:
Sat Jan 1 01:02:17 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Sat Jan 1 01:02:22 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Sat Jan 1 01:02:37 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:25:40 2013(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
Fri Aug 30 15:25:40 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:25:57 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:26:04 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:26:15 2013(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
Fri Aug 30 15:26:47 2013(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
Fri Aug 30 15:26:48 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: DNSServiceProcessResult returned -65537 stopping listen to mdnsd
Fri Aug 30 15:26:51 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:26:52 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: DNSServiceProcessResult returned -65537 stopping listen to mdnsd
Fri Aug 30 15:26:54 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:26:58 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:27:00 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:01 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:01 2013(CET) [rv120w][System][PLATFORM] [BONJOUR_ERROR]: Signal Sent to bonjourClient Failed
Fri Aug 30 15:27:01 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:02 2013(CET) [rv120w][System][EVTDSPTCH] umiIoctl (43, UMI_CMD_DB_UPDATE(4)) failed. table=FirewallRules row=101
Fri Aug 30 15:27:27 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:28 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:28 2013(CET) [rv120w][Local0-wireless][UDOT11] wpaAuthRecvPTKMsg2: mic check failed
Fri Aug 30 15:27:52 2013(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
And these are the "warning" logs:
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CVMSEG size: 2 cache lines (256 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CPU revision is: 000d0601
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Determined physical RAM map:
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] memory: 0000000003800000 @ 0000000000700000 (usable)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Built 1 zonelists. Total pages: 14116
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PID hash table entries: 256 (order: 8, 2048 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Using 300.000 MHz high precision timer.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Calibrating delay using timer specific routine.. 600.35 BogoMIPS (lpj=1200701)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Mount-cache hash table entries: 256
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the multiply/shift bug... no.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddi bug... no.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddiu bug... no.
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Enabling Octeon big bar support
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PCI Status: PCI 32-bit
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] IP route cache hash table entries: 512 (order: 0, 4096 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] /proc/octeon_perf: Octeon performace counter interface loaded
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Total HugeTLB memory allocated, 0
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] RAMDISK driver initialized: 1 RAM disks of 500000K size 1024 blocksize
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] GACT probability NOT on
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Mirror/redirect action on
Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] u32 classifier
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Performance counters on
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Actions configured
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack version 2.4 (224 buckets, 1792 max) - 352 bytes per conntrack
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rtsp v0.6.21 loading
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_rtsp v0.6.21 loading
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] netfilter PSD loaded - (c) astaro AG
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_time loading
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Amd/Fujitsu Extended Query Table at 0x0040
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] cavium-ethernet: Cavium Networks Octeon SDK version 1.7.3, build 264
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for hardware offload succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for flow cache succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for brcm Tag succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for vlan enabled succeed
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Pool 0 size 2048 No 1024
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Pool 1 size 128 No 1024
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Pool 3 size 128 No 640
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] global cache allocation start 0
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Ipforward global cache allocation sucessfull
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for IMP port status
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for 802.1x enabled port
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for blocking non EAP packets status
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Interface 0 has 2 ports (GMII)
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 996
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 999
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 1037
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 1039
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] port ko 0
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] port ko 1
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] led module init...
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] umi: module license 'unspecified' taints kernel.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] eth0: 100 Mbps Full duplex, port 0, queue 0
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] eth1: 100 Mbps Full duplex, port 1, queue 1
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] PF_key: Initialized Security Policy Database.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] IPsec: Initialized Security Association Processing.
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] BUG: at kernel/softirq.c:138 local_bh_enable()
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Call Trace:[<ffffffff80121150>][<ffffffff80121150>][<ffffffff8014b2e0>][<ffffffff802c58ec>][<c0000000002231ac>][<c000000000229460>][<c0000000001eea80>][<c000000000229eb4>][<ffffffff802c0a00>][<ffffffff8011ae80>][<ffffffff8011ae80>][<ffffffff801
Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] HTB: quantum of class 10001 is big. Consider r2q change.
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL]
<4>Intializing the 8021P-DSCP Remark Module
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for _8021p task IMP portPCI: Enabling device 0000:00:03.0 (0000 -> 0002)
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] vap0: Broadcom BCM432c 802.11 Wireless Controller 5.60.120.9
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_pptp version 3.1 loaded
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_pptp version 3.0 loaded
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 5 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2d03 to 0x2b01: channel 6 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 6 used by exiting BSSs
Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
Sat Jan 1 01:01:51 2000(CET) [rv120w][System][PLATFORM] IPv6 not configured on the interface
Fri Aug 30 15:27:01 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:01 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:01 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:06 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Fri Aug 30 15:27:32 2013(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
hope you can help me!
EDIT: This is a log file from today in the morning:
[rv120w]Sat Jan 1 01:01:41 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:system op=23 row=1
[rv120w]Sat Jan 1 01:01:43 2000(CET) [rv120w][System][PLATFORM] [BONJOUR_DEBUG]: Getting the results of Sql Query: SELECT value FROM environment WHERE name='BONJOUR_DEFAULT_SERVICE_NAME'
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][System][PLATFORM] [BONJOUR_DEBUG]: Performing SqlQry : UPDATE bonjourDefaultServices SET textRecord = 'model=RV120W;deviceType=Router;deviceDescr=Wireless-N-VPN-Router;slaves=0;fmVersion=1.0.4.10;PIDVID=RV12
W-E V01;MACAddress=00077D150BCA;serialNo=SER15320A9Q
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Linux version 2.6.21.7-Cavium-Octeon ([email protected]) (gcc version 4.1.2 (Cavium Networks Version: 1_6_0, build 34)) #1 Mon Jun 18 13:30:50 IST 2012
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CVMSEG size: 2 cache lines (256 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] CPU revision is: 000d0601
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Determined physical RAM map:
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] memory: 0000000003800000 @ 0000000000700000 (usable)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Wasting 100352 bytes for tracking 1792 unused pages
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Initrd not found or empty - disabling initrd
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] On node 0 totalpages: 14336
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] DMA zone: 220 pages used for memmap
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] DMA zone: 0 pages reserved
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] DMA zone: 14116 pages, LIFO batch:3
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Normal zone: 0 pages used for memmap
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Built 1 zonelists. Total pages: 14116
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Kernel command line: bootoctlinux 0x3000200 mtdparts=phys_mapped_flash:512k(bootloader)ro,5632k(kernel),8704k(rootfs),1024k(data),128k(bootload-env) console=ttyS0,115200
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB refill handler (49 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB load handler fastpath (64 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB store handler fastpath (67 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Synthesized TLB modify handler fastpath (64 instructions).
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PID hash table entries: 256 (order: 8, 2048 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Using 300.000 MHz high precision timer.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Memory: 53600k/57344k available (3099k kernel code, 3688k reserved, 669k data, 1788k init, 0k highmem)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Calibrating delay using timer specific routine.. 600.35 BogoMIPS (lpj=1200702)
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Mount-cache hash table entries: 256
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the multiply/shift bug... no.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddi bug... no.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Checking for the daddiu bug... no.
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 16
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Enabling Octeon big bar support
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] PCI Status: PCI 32-bit
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 2
[rv120w]Sat Jan 1 01:01:44 2000(CET) [rv120w][Kernel][KERNEL] Time: MIPS clocksource has been installed.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] IP route cache hash table entries: 512 (order: 0, 4096 bytes)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP: Hash tables configured (established 2048 bind 2048)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP reno registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] /proc/octeon_perf: Octeon performace counter interface loaded
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Total HugeTLB memory allocated, 0
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] io scheduler noop registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] io scheduler cfq registered (default)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] RAMDISK driver initialized: 1 RAM disks of 500000K size 1024 blocksize
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] loop: loaded (max 8 devices)
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] PPP generic driver version 2.4.2
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] PPP BSD Compression module registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] MPPE/MPPC encryption/compression module registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 24
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] slram: not enough parameters.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] i2c /dev entries driver
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] GACT probability NOT on
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Mirror/redirect action on
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] u32 classifier
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Performance counters on
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Actions configured
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack version 2.4 (224 buckets, 1792 max) - 352 bytes per conntrack
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rsh: registering helper for port #0: 514/TCP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rsh: helper match ip 0.0.0.0:514-0.0.0.0:0
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rsh: helper match mask 0.0.0.0:64512-0.0.0.0:64512
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rtsp v0.6.21 loading
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] net/ipv4/netfilter/ip_conntrack_rtsp.c: ip_conntrack_rtsp_init: port #0: 554
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_rtsp v0.6.21 loading
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_tables: (C) 2000-2006 Netfilter Core Team
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_account 0.1.7 : Piotr Gasid³o <[email protected]>, http://www.barbara.eu.org/~quaker/ipt_account/
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] netfilter PSD loaded - (c) astaro AG
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_time loading
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: registering helper for port #0: 111/TCP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: helper match ip 0.0.0.0:0->0.0.0.0:111
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: helper match mask 0.0.0.0:0->0.0.0.0:65535
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_tcp: disabling Legato NetWorker support for port 0/TCP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_rpc: registering match [rpc] for;
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ipt_rpc: port 111 (UDP|TCP);
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_udp: registering helper for port #0: 111/UDP
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_udp: helper match ip 0.0.0.0:0->0.0.0.0:111
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_rpc_udp: helper match mask 0.0.0.0:0->0.0.0.0:65535
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] TCP cubic registered
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 1
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 10
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] IPv6 over IPv4 tunneling driver
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 17
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] All bugs added by David S. Miller <[email protected]>
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] serial8250: ttyS0 at MMIO 0x1180000000800 (irq = 42) is a 16550A
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Amd/Fujitsu Extended Query Table at 0x0040
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] number of CFI chips: 1
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 5 cmdlinepart partitions found on MTD device phys_mapped_flash
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] Creating 5 MTD partitions on "phys_mapped_flash":
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 0x00000000-0x00080000 : "bootloader"
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 0x00080000-0x00600000 : "kernel"
[rv120w]Sat Jan 1 01:01:45 2000(CET) [rv120w][Kernel][KERNEL] 0x00600000-0x00e80000 : "rootfs"
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 0x00e80000-0x00f80000 : "data"
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 0x00f80000-0x00fa0000 : "bootload-env"
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Freeing unused kernel memory: 1788k freed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] cavium-ethernet: Cavium Networks Octeon SDK version 1.7.3, build 264
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for hardware offload succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for flow cache succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for brcm Tag succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Register the sysctl for vlan enabled succeed
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Pool 0 size 2048 No 1024
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Pool 1 size 128 No 1024
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Pool 3 size 128 No 640
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] global cache allocation start 0
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Ipforward global cache allocation sucessfull
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for IMP port status
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for 802.1x enabled port
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for blocking non EAP packets status
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Interface 0 has 2 ports (GMII)
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 996
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 999
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 1037
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] 1039
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] port ko 0
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] port ko 1
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] led module init...
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] umi: module license 'unspecified' taints kernel.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 32
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] kernel UMI module loaded
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] eth0: 100 Mbps Full duplex, port 0, queue 0
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] eth1: 100 Mbps Full duplex, port 1, queue 1
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Initializing PF_KEY V2 Key Management socket interface.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] NET: Registered protocol family 15
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] PF_key: Started key_timehandler
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] PF_key: Initialized Security Policy Database.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] IPsec: Initialized Security Association Processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] XLR8 IPSec Framework Initialized
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Software Backend Registered with XLR8 IPSec Framework
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding AH4 protocol processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding ESP4 protocol processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding IPCOMP4 protocol processing.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Adding packet sink.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] BUG: at kernel/softirq.c:138 local_bh_enable()
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Call Trace:[<ffffffff80121150>][<ffffffff80121150>][<ffffffff8014b2e0>][<ffffffff802c58ec>][<c0000000002231ac>][<c000000000229460>][<c0000000001eea80>][<c000000000229eb4>][<ffffffff802c0a00>]
<ffffffff8011ae80>][<ffffffff8011ae80>][<ffffffff801
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] HTB: quantum of class 10001 is big. Consider r2q change.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL]
<4>Intializing the 8021P-DSCP Remark Module
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Registerd the sysctl for _8021p task IMP portPCI: Enabling device 0000:00:03.0 (0000 -> 0002)
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] vap0: Broadcom BCM432c 802.11 Wireless Controller 5.60.120.9
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] N_HDLC line discipline registered.
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] Loading mii
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] using bcm switch bcm5395
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] privlegedID 4094 wanporttNo: 5
[rv120w]Sat Jan 1 01:01:46 2000(CET) [rv120w][Kernel][KERNEL] eth1: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] Loading ifDev module
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack_pptp version 3.1 loaded
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] ip_nat_pptp version 3.0 loaded
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e09 to 0x2b0b: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] COEX: downgraded chanspec 0x2e0b to 0x2b0d: channel 6 used by exiting BSSs
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] vap0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: eth0
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0) entering learning state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0 left promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0) entering disabled state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:ff:15:0b:ca mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:ff:15:0b:ca mcast address from master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 01:00:5e:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 01:00:5e:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:00:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: del 33:33:00:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: eth0.1
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0.1 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: dev_set_promiscuity(master, 1)
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device eth0 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0.1) entering learning state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: vap0
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] device vap0 entered promiscuous mode
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 2(vap0) entering learning state
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:47 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:ff:15:0b:ca mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:ff:15:0b:ca mcast address from master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 01:00:5e:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 01:00:5e:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:00:00:00:01 mcast address from vlan interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: del 33:33:00:00:00:01 mcast address from master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] IPsec: device down: eth0.2
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: dev_set_promiscuity(master, 1)
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:00:00:00:01 mcast address to master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: add 33:33:ff:15:0b:ca mcast address to master interface
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] bdg2: port 1(eth0.2) entering learning state
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] bdg1: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:48 2000(CET) [rv120w][Kernel][KERNEL] bdg2: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] eth0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] vap0: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] eth0.2: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] eth0.1: no IPv6 routers present
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: topology change detected, propagating
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 1(eth0.1) entering forwarding state
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: topology change detected, propagating
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg1: port 2(vap0) entering forwarding state
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg2: topology change detected, propagating
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][Kernel][KERNEL] bdg2: port 1(eth0.2) entering forwarding state
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:01:49 2000(CET) [rv120w][System][FIREWALL] restartStatus = 0 for LogicalIfName = LAN2
[rv120w]Sat Jan 1 01:01:52 2000(CET) [rv120w][System][PLATFORM] IPv6 not configured on the interface
[rv120w]Sat Jan 1 01:01:53 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=18 row=5
[rv120w]Sat Jan 1 01:01:53 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:18 rowId:5
[rv120w]Sat Jan 1 01:01:53 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:18 rowId:5
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] manufacturingCo uses obsolete (PF_INET,SOCK_PACKET)
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:55 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=18 row=9
[rv120w]Sat Jan 1 01:01:55 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:18 rowId:9
[rv120w]Sat Jan 1 01:01:55 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:01:56 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:18 rowId:9
[rv120w]Sat Jan 1 01:01:56 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 18 rowId: 9
[rv120w]Sat Jan 1 01:01:56 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:01:57 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:01:57 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:18 rowId:9
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 0.0.0.0___
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.12.1___
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = LAN
[rv120w]Sat Jan 1 01:01:58 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For LAN Address Update from 0.0.0.0:192.168.12.1
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=1
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][Kernel][KERNEL] printk: 30 messages suppressed.
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:01:59 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 192.168.12.1___
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.12.1___
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = LAN
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=1
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:01 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For WAN1 Address Update from 0.0.0.0:193.158.228.75
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:02:03 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][Kernel][KERNEL] printk: 29 messages suppressed.
[rv120w]Sat Jan 1 01:02:04 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:05 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 192.168.2.1___
[rv120w]Sat Jan 1 01:02:05 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][FIREWALL] restartStatus = 0 for LogicalIfName = LAN2
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=5
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:06 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -D webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][FIREWALL] ____/pfrm2.0/bin/ipset -A webFltr 192.168.10.12___
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][FIREWALL] restartStatus = 0 for LogicalIfName = LAN2
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=5
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:08 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:5
[rv120w]Sat Jan 1 01:02:09 2000(CET) [rv120w][Kernel][KERNEL] printk: 56 messages suppressed.
[rv120w]Sat Jan 1 01:02:09 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:10 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:dhcpCfgLoad op=23 row=1
[rv120w]Sat Jan 1 01:02:10 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:13 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:14 2000(CET) [rv120w][Kernel][KERNEL] printk: 66 messages suppressed.
[rv120w]Sat Jan 1 01:02:14 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:16 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:02:16 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:02:16 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:17 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:17 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:18 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:18 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:02:18 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:02:19 2000(CET) [rv120w][Kernel][KERNEL] printk: 50 messages suppressed.
[rv120w]Sat Jan 1 01:02:19 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:20 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:20 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:21 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:21 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:02:22 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:02:22 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:02:22 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:02:23 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:02:24 2000(CET) [rv120w][Kernel][KERNEL] printk: 85 messages suppressed.
[rv120w]Sat Jan 1 01:02:24 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:25 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:25 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:26 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:26 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:02:26 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:02:27 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:02:27 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:NimfAFStatus op=23 row=1
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: NimfAFStatus opCode:23 rowId:1
[rv120w]Sat Jan 1 01:02:28 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:29 2000(CET) [rv120w][Kernel][KERNEL] printk: 115 messages suppressed.
[rv120w]Sat Jan 1 01:02:29 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:31 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:02:34 2000(CET) [rv120w][Kernel][KERNEL] printk: 133 messages suppressed.
[rv120w]Sat Jan 1 01:02:34 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For WAN1 Address Update from 0.0.0.0:193.158.228.75
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:35 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:02:37 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:02:37 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:02:37 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][Kernel][KERNEL] printk: 133 messages suppressed.
[rv120w]Sat Jan 1 01:02:39 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:40 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:41 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:02:41 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:02:41 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:02:42 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:02:49 2000(CET) [rv120w][Kernel][KERNEL] printk: 96 messages suppressed.
[rv120w]Sat Jan 1 01:02:49 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:49 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:02:54 2000(CET) [rv120w][Kernel][KERNEL] printk: 30 messages suppressed.
[rv120w]Sat Jan 1 01:02:54 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][Kernel][KERNEL] printk: 33 messages suppressed.
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 0
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 1
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 2
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 3
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 4
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 5
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Attack Check for 6
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling ICSA Notification Item 0
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling Management Access from Internet to port 8200
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Disabling Source MAC Filtering
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Adding MAC Filter Policy for Block & Permit Rest
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Restarting Source MAC Address Policy
[rv120w]Sat Jan 1 01:03:00 2000(CET) [rv120w][System][FIREWALL] Enabling DOS Attacks
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:03:03 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:03:05 2000(CET) [rv120w][Kernel][KERNEL] printk: 102 messages suppressed.
[rv120w]Sat Jan 1 01:03:05 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:05 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:06 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:06 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:03:07 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:NimfAFStatus op=23 row=1
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: NimfAFStatus opCode:23 rowId:1
[rv120w]Sat Jan 1 01:03:08 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:03:10 2000(CET) [rv120w][Kernel][KERNEL] printk: 129 messages suppressed.
[rv120w]Sat Jan 1 01:03:10 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:12 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:resolverConfig op=23 row=2
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][Kernel][KERNEL] printk: 99 messages suppressed.
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][FIREWALL] restartStatus = 1 for LogicalIfName = WAN1
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall For WAN1 Address Update from 0.0.0.0:193.158.228.75
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:ipAddressTable op=23 row=2
[rv120w]Sat Jan 1 01:03:15 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:03:16 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:16 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: ipAddressTable opCode:23 rowId:2
[rv120w]Sat Jan 1 01:03:17 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:17 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:03:17 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:03:19 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:19 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][Kernel][KERNEL] printk: 132 messages suppressed.
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:20 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:03:21 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:03:21 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:03:21 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][FIREWALL] Restarting Firewall [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][NIMF] Setting LED [0]:[1] For WAN1
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][NIMF] nimfNetIfaceTblHandler: unable to get LedPinId
[rv120w]Sat Jan 1 01:03:22 2000(CET) [rv120w][System][PLATFORM] platformHandleDBUpdate:networkInterface op=23 row=3
[rv120w]Sat Jan 1 01:03:24 2000(CET) [rv120w][System][PLATFORM] pptpdMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:24 2000(CET) [rv120w][System][PLATFORM] options.pptpd file found
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][System][PLATFORM] upnpMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][Kernel][KERNEL] printk: 186 messages suppressed.
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][Kernel][KERNEL] ip_conntrack: table full, dropping packet.
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][System][PLATFORM] igmpMgmtDBUpdateHandler: update received: Table: networkInterface opCode: 23 rowId: 3
[rv120w]Sat Jan 1 01:03:25 2000(CET) [rv120w][System][PLATFORM] igmpDisable: failed to disable IGMP proxy. IGMP proxy may not be running at all!
[rv120w]Sat Jan 1 01:03:26 2000(CET) [rv120w][System][PLATFORM] Disabling Firewall Rule for DHCP Relay Protocol
[rv120w]Sat Jan 1 01:03:26 2000(CET) [rv120w][System][PLATFORM] ddnsMgmtDBUpdateHandler:DBUpdate event: Table: networkInterface opCode:23 rowId:3
[rv120w]Sat Jan 1 01:03:27 2000(CET) [rv120w][System][FIREWALL] RestartThis sounds like you may have a faulty unit. I'd recommend opening a case with STAC to troubleshoot or RMA the device. Let me know if you have any questions. Have a wonderful day!
-Trent Good
** Please rate useful posts! ** -
Cisco 4404 WLC causing a DOS attack several times a day
Hi Everyone
Excuse if this is a duplicate post, but I have searched the forums, but no joy. I also posted it in wireless security as this is where I felt it fits.
Anyway onto my issue:
I manage a CISCO 4404 WLC with about 46 access points across our WAN. System works very well, serving trusted users, guests etc very well.
However, over the last month or two we have had an issue where we have had high load on our WAN.
We have traced this down to the CISCO 4404, about 3-4 times a day, the controller connects to every access point and transmits about 5-8mb of data on port 5427. This in itself would not be a problem, but it connects to all 46 at the same time.
Yes, 46 x 5mb = no WAN for about 2-5 minutes.
ARGH!
So can anyone sugest where I start to look? I am happy to post configs etc. Firmware 7.0.230
CheersHi Steve
Yes it is the capwap port. The remote access points are in hreap mode and servicing trusted network access (802.1x) and guest access is tunnelled across the wan with local breakout from the 4404 via a dedicated vlan. The guest wireless is wpa2.
As the traffic originates from the 4404 and goes to all access points we don't believe it is a network breach. I always hate the phrase "it affects everyone", it usually does not, however in this instance the packeteer shows it does connect to every access point.
DNS is also configured so when new access points are connected they get auto join and get a base configuration.
This issue has been going on since at least Christmas and we put a packeteer box between our wan and our local network. We can say it is the 4404. -
Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app for that
No, there are no apps that can do that, as no app would have access to the necessary API's to perform such a task.
-
I am trying to find an app that will automatically forward all voice calls at preset times each day
IE - at 083am weekdays
and automatically cancel the call forward at 6pm weekdays
At the moment i am doing it manually with alarms set to remind me
Seems a pretty basic "want" but - i cant find anything
And APPLE - make it easier to find APPS in the APP store - wy not have a search feature that you can type in what you are looking for??
Thanks!!There are no apps to do what you want, that's why you can't find any. No app would have access to the necessary API's to do this, thus only Apple could implement such. You can suggest such to Apple here:
http://www.apple.com/feedback/iphone.html
Another suggestion is to look at Google Voice. I don't know if it offers these specific features or not, but it is highly customizable. -
Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanksThis is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php -
Importing is taking too much time (2 DAYS)
Dear All,
I'm Importing below support packages together in a queue @ SAP Solution manger 4 .
SAPKB70015 Basis Support Package 15 for 7.00
SAPKA70015 ABA Support Package 15 for 7.00
SAPKITL426 ST 400: Patch 0016, CRT for SAPKB70015
SAPKIBIIP6 BI_CONT 703: patch 0006
SAPKIBIIP7 BI_CONT 703: patch 0007
SAPKIBIIP8 BI_CONT 703: patch 0008
SAPK-40010INCPRXRPM CPRXRPM 400: patch 0010
SAPK-40011INCPRXRPM CPRXRPM 400: patch 0011
SAPK-40012INCPRXRPM CPRXRPM 400: patch 0012
SAPKIPYJ7E PI_BASIS 2005_1_700: patch 0014
SAPKW70016 BW Support Package 16 for 7.00
importing is taking too much time (2 DAYS) in main import phase, I have seen SLOG, there are many rows " I am waiting 1 sec and 6 sec . and also checked transaction code STMS all support packages imported except one support package "SAPKW70016 "
Please advice.
Best Regards'
HEHello Mohan,
The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
Note 531923 - Audit Trail: Indexes on table DBTABLOG
Note 579980 - Table logs: Performance during access to DBTABLOG
Regards,
Siddhesh -
My iMac does an automatic restart several times a day. It gives me a option to send in a "panic" report. This happens randomly during the day and night. Any idea of anything new that might be causing this? I am up to date on all applications.
Mac users often ask whether they should install "anti-virus" (AV) software. The usual answer is "no." That answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions.
It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to take control of it remotely. That threat is in a different category, and there's no easy way to defend against it. AV software is not intended to, and does not, defend against such attacks.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't been checked for security by Apple unless it comes from the App Store, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has taken far too long to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. Those lapses don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, not machine behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software. A genuine alert that Flash is outdated and blocked is shown on this support page. Follow the instructions on the support page in that case. Otherwise, assume that the alert is fake and someone is trying to scam you into installing malware. If you see such alerts on more than one website, ask for instructions.
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a padlock icon in the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial AV or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It can be as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
Firefox crashes multiple times per day
Hello all!
As of the last month or two, Firefox now crashes multiple times per day (even in Safe Mode). Firefox is fully updated, as are my Add-ons and Extensions.
Yesterday alone, it crashed 14 times (which is about average).
System Info:
Windows 7 Home Premium
Intel Core i7-3610QM CPU @ 2.30 GHz
8.00 GB RAM
64-bit OS
Troubleshooting details:
"application": {
"name": "Firefox",
"version": "30.0",
"userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:30.0) Gecko/20100101 Firefox/30.0",
"supportURL": "https://support.mozilla.org/1/firefox/30.0/WINNT/en-US/"
"crashes": {
"submitted": [
"id": "bp-56f4b9d3-7646-4804-b1f0-6b86a2140712",
"date": 1405205216202,
"pending": false
"id": "bp-252f490e-dbc4-4b6c-89bb-abc7a2140712",
"date": 1405205139899,
"pending": false
"id": "bp-728dabc3-d5ae-42cc-a7b3-5ef922140712",
"date": 1405204414387,
"pending": false
"id": "bp-f4cf2971-3a0d-4737-b3e4-81c2f2140712",
"date": 1405204325838,
"pending": false
"id": "bp-717ff5d6-7edf-49c7-956f-247e52140712",
"date": 1405204300027,
"pending": false
"id": "bp-e0f0c131-39c9-40e3-b6aa-45c312140712",
"date": 1405184955514,
"pending": false
"id": "bp-8f6e4e47-0363-48d2-a7ff-875b92140712",
"date": 1405184937698,
"pending": false
"id": "bp-9245429c-ccfc-41fa-9edd-79baa2140712",
"date": 1405184884426,
"pending": false
"id": "bp-5e91822b-8fc3-411c-bcf7-c753f2140712",
"date": 1405184798033,
"pending": false
"id": "bp-db406fb0-7045-41a5-b42c-522db2140712",
"date": 1405183704121,
"pending": false
"id": "bp-6c913909-d1ef-4773-9712-fa1b92140712",
"date": 1405183678385,
"pending": false
"id": "bp-65a30f3e-da4a-406b-9bfa-8cec72140712",
"date": 1405178435488,
"pending": false
"id": "bp-11fbb2a8-923f-4ab3-b577-6dbe32140712",
"date": 1405178411720,
"pending": false
"id": "bp-968183f6-086d-430a-a993-f1d892140712",
"date": 1405127322874,
"pending": false
"id": "bp-017688f8-afc7-4b90-8fa7-2be692140711",
"date": 1405040514173,
"pending": false
"id": "bp-342b9f6c-3ffd-489e-ae1c-b5ac62140711",
"date": 1405037808744,
"pending": false
"id": "bp-62c1ea5a-24da-421f-9983-9b09c2140711",
"date": 1405037772426,
"pending": false
"id": "bp-a7227128-b4dd-4cd5-997c-b9f132140711",
"date": 1405037229671,
"pending": false
"id": "bp-2d0b1114-0d86-4f2b-ba7d-20f902140711",
"date": 1405037207333,
"pending": false
"pending": 1
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"accessibility.browsewithcaret": true,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.places.smartBookmarksVersion": 7,
"browser.sessionstore.upgradeBackup.latestBuildID": "20140605174243",
"browser.startup.homepage_override.mstone": "30.0",
"browser.startup.homepage": "https://www.bing.com/",
"browser.startup.homepage_override.buildID": "20140605174243",
"dom.mozApps.used": true,
"extensions.lastAppVersion": "30.0",
"font.internaluseonly.changed": false,
"gfx.direct3d.last_used_feature_level_idx": 0,
"network.cookie.prefsMigrated": true,
"network.cookie.cookieBehavior": 2,
"places.database.lastMaintenance": 1405257179,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.state.npitunes": 0,
"plugin.state.npesnsonar": 0,
"plugin.state.npesnlaunch": 0,
"plugin.importedState": true,
"plugin.state.npsitesafety": 0,
"plugin.state.npauthz": 0,
"plugin.disable_full_page_plugin_for_types": "application/pdf,application/vnd.adobe.xfdf,application/vnd.fdf,application/vnd.adobe.xdp+xml",
"plugin.state.npwlpg": 0,
"plugin.state.npffwloplugin": 0,
"plugin.state.npdeployjava": 0,
"plugin.state.np_wtapp": 0,
"privacy.cpd.offlineApps": true,
"privacy.cpd.sessions": false,
"privacy.donottrackheader.enabled": true,
"privacy.sanitize.migrateFx3Prefs": true,
"storage.vacuum.last.places.sqlite": 1405258871,
"storage.vacuum.last.index": 0
"graphics": {
"numTotalWindows": 2,
"numAcceleratedWindows": 2,
"windowLayerManagerType": "Direct3D 10",
"windowLayerManagerRemote": false,
"adapterDescription": "Intel(R) HD Graphics 4000",
"adapterVendorID": "0x8086",
"adapterDeviceID": "0x0166",
"adapterRAM": "Unknown",
"adapterDrivers": "igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32",
"driverVersion": "9.17.10.2843",
"driverDate": "8-21-2012",
"adapterDescription2": "NVIDIA GeForce GT 650M ",
"adapterVendorID2": "0x10de",
"adapterDeviceID2": "0x0fd1",
"adapterRAM2": "2048",
"adapterDrivers2": "nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um",
"driverVersion2": "9.18.13.3788",
"driverDate2": "5-19-2014",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.2.9200.16571",
"clearTypeParameters": "Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 100 ",
"webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.6",
"version": "4.10.6"
"NSS": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSUTIL": {
"minVersion": "3.16",
"version": "3.16"
"NSSSSL": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSSMIME": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Norton Toolbar",
"version": "2014.7.2.6",
"isActive": true,
"id": "{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}"
"name": "Norton Vulnerability Protection",
"version": "12.2.0.5 - 1",
"isActive": true,
"id": "{BBDA0591-3099-440a-AA10-41764D9DB4DB}"
"name": "Troubleshooter",
"version": "1.1a",
"isActive": true,
"id": "[email protected]"
"name": "Windows Media Player Extension for Firefox",
"version": "1.1",
"isActive": true,
"id": "jid0-nRwp7VvCqZcSRTppwWz2npqGEKw@jetpack"
"name": "HTTPS-Everywhere",
"version": "3.5.3",
"isActive": false,
"id": "[email protected]"
}Was discussed here - https://support.mozilla.org/en-US/forums/contributors/709022 - in Feb 2013. And Bug #738661 was filed in March of 2012, with the consensus being.
'''"In that case this is more likely a bug in Covenant Eyes than it is a bug in Firefox. If we have no hope of success through engaging with Covenant Eyes and can't blocklist the offending DLL from loading, can we at least get a support article posted instructing users how to work around this issue (ie. removing Covenant Eyes or switching to a different browser)?'''
'''Additionally, I don't see much point in keeping this bug in the NEW state if it's unreasonable to expect that we'll ever fix this."''' -
How do I find out what time of day an email received prior to today was sent?
Internet Explorer shows the time of day all emails were originated, but on Firefox I only see it for emails originated the same day that I'm reading them. Is there a way to see the origination time for all emails?
That information would be in the ''' "header" ''' of each email you receive. You need to figure out how to display that information in whatever you're using to display your email. Look for a button or menu item for "Display Header". <br /> Firefox doesn't "do" email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]
Maybe you are looking for
-
PROBLEM IN BDC FOR WHILE CREATING PGI
Hi All, I am using BDC program to Create PGI automatically from custom development program for CASHTILL . In Vl02n there is one Custom development screen '9999', it will be called when press POSTGOODSISSUE button in VL02n. I am filling this screen al
-
Trouble: java.rmi.ServerException:
Hi all, I tried to execute the example given in Sun tutorial. I am getting the following error Trouble: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is: java.rmi.UnmarshalException: error unmarshalling argumen
-
Everything starting to run very slow
I have had my mac book pro for almost a year, and for a little while now its been running very very very slow for anything, or i try to switch windows and i get a huge delay in it crossing over, like a lag spike in processing. is there a type of defr
-
Hi, I am having problems with the Photoshop CC. The software is sometimes very slow, sometimes a blank menu happens, and the selection tool does not work properly!!! What should I do?? Thanks, Clara.
-
Next,previous,last, and first record
dear all masters plz help me my code dont work i used button when button pressed and code below First_Record; execute_query; last_record; execute_query; previous_record; execute_query; next_record; execute_query; but all wont work it wont goto the ne