WDDOBEFORENAVIGATION - check if F4 help is requested
Is it possible to check in WDDOBEFORENAVIGATION if a F4 help has been requested by the user?
Hello Moritz,
By design for an application it should not matter if a user made an entry directly or by using a value help. Hence, such a distinction is not possible.
Best regards,
Thomas
Similar Messages
-
Check printing ,Please help : Urgent!!!!!!!
One of the user printed wrong information on a check.She wants to void that check and reprint a new one.The information also came on next check,But the information of second check is not the check lot ,I mean in the system,where as first check information is in the check lot.Which T. codes do we use and how do i deal with second check..Do i need to do anything in FCHI(make changes to next available check number).Please help me as she needs it immediately.
First check : 1469
second check: 1470
1470 information is not in the system.
I will assign you points.
Thankshi first check in FCHI - as to what your range is. post your range here. Then go to FCh1 and view the check info. maybe you have the test out put checked so the first check is voiding automatically. Aslo check in FCHN
Points will be appreciated
Regards,
Zaid -
Transport request : tp check buffer for already imported requests
Hi,
I want to put a transport request on my prod. There was no problem on the quality. But on the prod, i have the message :
"tp check buffer for already imported requests"
and nothing appends.
Do you have any idea how i can unlock this transport request ?
Tx in advance.Hi,
Use table E070. and display the Transport reqeust and double click on the request row.and in command prompt enter ' /h '. change status as unreleased.
Regards
Jana -
I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!
If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Need urgent help :'The requested resource does not exist error'
Hi All,
I am getting 'The requested resource does not exist error' when trying to acess http://machinename:50000/irj
Even when i access http://machinename:50000, i get the same 'The root directory does not exist' error. I checked in visual admin, there is no other application deployed except my application.
Any clues? Pls help
thanks
bhawnaHI ,
Did succeed to solve your problem. I am running into same problem.
Any help is welcome.
Thank u very much. -
Checking Account and help with code ?
Hi all..my computer hung up on me, so I'm not sure if my last post went through. First of all thank you all for helping me out the other day with my question on the Bank Account. It continues :)
I'm trying to work on each class one by one..when I test my Checking Account, it isn't printing out the correct balance. The string method to print this is coming from the Withdrawal class...so I know it has to be somewhere in there but I can't seem to figure out why it isn't totalling the balance...or how to get it too.
Then when I test my MyBank class, it hangs up on line 63..which I could swear I have written correctly. Again I am getting a NullPointerException and I honestly think I have the line of code written right, but I'm guessing I dont.
Any help would be appreciated.
public abstract class BankAccount {
public static final String bankName = "BrianBank";
protected String custName;
protected String pin;
protected Transaction[] history;
private double balance;
private double amt, amount;
private double bal, initBal;
private int transactions;
private final int MAX_HISTORY = 100;
private int acct;
protected BankAccount(String cname, String cpin, double initBal) {
custName = cname;
pin = cpin;
balance = initBal;
history = new Transaction[MAX_HISTORY];
transactions =0;
public double getBalance() {
return balance;
public void withdraw(double amt) {
history [transactions] = new Withdrawal (bal, amt);
balance = bal;
amount = amt;
balance -= amt;
transactions = transactions + 1;
public void deposit(double amt) {
history [transactions] = new Deposit (bal, amt);
balance = bal;
amount = amt;
balance += amt;
transactions = transactions +1;
// abstract method to return account number
public abstract int getAcctNum();
// abstract method to return a summary of transactions as a string
public abstract String getStatement();
public class CheckingAccount extends BankAccount implements IncursFee
private int transactions;
private double balance, initBal, amt;
private static final int NOFEE_WITHDRAWALS = 10;
private static final double TRANSACTION_FEE = 5.00;
public static final String bankName = "iBank";
public static final int STARTING_ACCOUNT_NUMBER = 10000;
private int checkingAccountNumber = STARTING_ACCOUNT_NUMBER;
private static int accountNumberCounter = STARTING_ACCOUNT_NUMBER;
private String custName;
private String pin;
public CheckingAccount (String cname, String cpin, double initBal)
super (cname, cpin, initBal);
custName = cname;
pin = cpin;
balance = initBal;
accountNumberCounter++;
checkingAccountNumber = accountNumberCounter;
//initialize a count of transactions
transactions = 0;
public double getBalance()
return balance;
public void withdraw(double amt)
super.withdraw (amt);
transactions ++;
public void deposit(double amt)
super.deposit (amt);
transactions ++;
public int getAcctNum ()
return checkingAccountNumber;
public String getStatement ()
int i = 0;
String output = "";
while ( i < history.length && history[i] != null )
output += history.toString () + "\n";
i++;
return output;
public void deductFee(double fee)
if (transactions > NOFEE_WITHDRAWALS)
{ fee = TRANSACTION_FEE *(transactions - NOFEE_WITHDRAWALS);
super.withdraw(fee);
balance -=fee;
transactions = 0;
public interface IncursFee {
public abstract void deductFee(double fee);
public abstract class Transaction {
protected double initBal;
protected double tranAmt;
// constructor
protected Transaction(double bal, double amt) {
initBal = bal;
tranAmt = amt;
abstract public String toString();
public class Withdrawal extends Transaction
private double initBal;
private double amount;
private static NumberFormat fmt = NumberFormat.getCurrencyInstance();
public Withdrawal (double bal, double amt)
super (bal, amt);
initBal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initBal) + "\n" + "Withdrawal : " + fmt.format(amount);
import java.text.NumberFormat;
public class Deposit extends Transaction
private double initbal, balance;
private double amount;
private static NumberFormat fmt = NumberFormat.getCurrencyInstance();
public Deposit (double bal, double amt)
super (bal, amt);
initbal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initbal) + "\n" + "Deposit : " + fmt.format(amount);
public class TestCheckingAcct {
public static void main(String[] args) {
BankAccount b1 = new CheckingAccount("Harry", "1234", 500.0);
System.out.println (b1.getBalance ());
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(50);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(10);
b1.withdraw(1);
System.out.println(b1.getStatement());
// This interface specifies the functionality requirements of a bank
public interface Bank {
public abstract int openNewAccount(String customerName, String customerPIN, String accType, double initDepAmount);
public abstract void processWithdrawal(int accNum, String pin, double amount);
// executes a deposit on the specified acct by the amount
public abstract void processDeposit(int accNum, String pin, double amount);
// returns the balance of acct
public abstract double processBalanceInquiry(int accNum, String pin);
// returns summary of transactions
public abstract String processStatementInquiry(int accNum, String pin);
import java.util.ArrayList;
public class MyBank implements Bank
private ArrayList<BankAccount> savAccounts = new ArrayList<BankAccount>(); //dynamically grows
private ArrayList<BankAccount> chkAccounts = new ArrayList<BankAccount>(); //dynamically grows
private SavingsAccount sav;
private CheckingAccount chk;
private int accNum;
private String customerName, customerPIN, accType, pin;
private double initDepAmount, amount, balance;
public int openNewAccount(String customerName, String customerPIN, String accType, double initDepAmount)
this.customerName = customerName;
this.customerPIN = customerPIN;
this.accType = accType;
this.initDepAmount = initDepAmount;
if ( accType.equals("Savings"))
BankAccount savAcct = new SavingsAccount(customerName, customerPIN, initDepAmount);
try
savAccounts.add(savAcct);
catch (ArrayIndexOutOfBoundsException savAccounts)
return savAcct.getAcctNum();
else
CheckingAccount chkAcct = new CheckingAccount(customerName, customerPIN, initDepAmount);
try
chkAccounts.add(chkAcct);
catch (ArrayIndexOutOfBoundsException chkAccounts)
return chkAcct.getAcctNum();
public void processWithdrawal (int accNum, String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.withdraw (amount);
if (accNum >50000 && accNum <60000)
sav.withdraw (amount);
public void processDeposit (int accNum, String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.deposit (amount);
if (accNum >50000 && accNum <60000)
sav.deposit (amount);
public double processBalanceInquiry (int accNum, String pin)
this.accNum = accNum;
this.pin = pin;
this.balance = 0;
if (accNum >10000 && accNum <20000)
balance = chk.getBalance ();
if (accNum >50000 && accNum <60000)
balance = sav.getBalance ();
return balance;
public String processStatementInquiry(int accNum, String pin)
this.accNum = accNum;
this.pin = pin;
this.statement = "";
if (accNum >10000 && accNum <20000)
statement = chk.getStatement ();
if (accNum >50000 && accNum <60000)
statement= sav.getStatement ();
return statement;Here's some quick code review:
public abstract class BankAccount {
public static final String bankName =
me = "BrianBank";
protected String custName;
protected String pin;
protected Transaction[] history;
private double balance;
private double amt, amount;
private double bal, initBal;
private int transactions;// make MAX_HISTORY private static final, too.
private final int MAX_HISTORY = 100;
private int acct;
protected BankAccount(String cname, String cpin,
pin, double initBal) {
custName = cname;
pin = cpin;
balance = initBal;
history = new Transaction[MAX_HISTORY];
transactions =0;
public double getBalance() {
return balance;
public void withdraw(double amt) {
history [transactions] = new Withdrawal (bal, amt);
balance = bal;
amount = amt;
balance -= amt;// ++transactions above would be elegant.
transactions = transactions + 1;
public void deposit(double amt) {
history [transactions] = new Deposit (bal, amt);
balance = bal;
amount = amt;
balance += amt;
transactions = transactions +1;
// abstract method to return account number// why abstract?
public abstract int getAcctNum();
// abstract method to return a summary of
y of transactions as a string// why abstract?
public abstract String getStatement();
public class CheckingAccount extends BankAccount
implements IncursFee
private int transactions;
private double balance, initBal, amt;
private static final int NOFEE_WITHDRAWALS =
WALS = 10;
private static final double TRANSACTION_FEE =
_FEE = 5.00;
public static final String bankName = "iBank";
public static final int STARTING_ACCOUNT_NUMBER
NUMBER = 10000;
private int checkingAccountNumber =
mber = STARTING_ACCOUNT_NUMBER;
private static int accountNumberCounter =
nter = STARTING_ACCOUNT_NUMBER;// BankAccount has a custName attribute; why does CheckingAccount need
// one if it extends BankAccount?
private String custName;
private String pin;
public CheckingAccount (String cname, String
String cpin, double initBal)
super (cname, cpin, initBal);
custName = cname;
pin = cpin;
balance = initBal;
accountNumberCounter++;
checkingAccountNumber =
tNumber = accountNumberCounter;
//initialize a count of transactions
transactions = 0;
// same as BankAccount - why rewrite it?
public double getBalance()
return balance;
// same as BankAccount - why rewrite it?
public void withdraw(double amt)
super.withdraw (amt);
transactions ++;
// same as BankAccount - why rewrite it?
public void deposit(double amt)
super.deposit (amt);
transactions ++;
// same as BankAccount - why rewrite it?
public int getAcctNum ()
return checkingAccountNumber;
public String getStatement ()
int i = 0;
String output = "";
while ( i < history.length && history[i] !=
ory[i] != null )
output += history.toString () + "\n";
i++;
return output;
public void deductFee(double fee)
if (transactions > NOFEE_WITHDRAWALS)
{ fee = TRANSACTION_FEE *(transactions -
ansactions - NOFEE_WITHDRAWALS);
super.withdraw(fee);
balance -=fee;
transactions = 0;
public interface IncursFee {
public abstract void deductFee(double fee);
public abstract class Transaction {
protected double initBal;
protected double tranAmt;
// constructor
// why protected? make it public.
protected Transaction(double bal, double amt) {
initBal = bal;
tranAmt = amt;
abstract public String toString();
public class Withdrawal extends Transaction
private double initBal;
private double amount;
private static NumberFormat fmt =
= NumberFormat.getCurrencyInstance();
public Withdrawal (double bal, double amt)
super (bal, amt);
initBal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initBal) + "\n" +
+ "Withdrawal : " + fmt.format(amount);
import java.text.NumberFormat;
public class Deposit extends Transaction
private double initbal, balance;
private double amount;
private static NumberFormat fmt =
= NumberFormat.getCurrencyInstance();
public Deposit (double bal, double amt)
super (bal, amt);
initbal = bal;
amount = amt;
public String toString ()
return "Balance : " + fmt.format(initbal) + "\n" +
+ "Deposit : " + fmt.format(amount);
public class TestCheckingAcct {
public static void main(String[] args) {
BankAccount b1 = new CheckingAccount("Harry",
, "1234", 500.0);
System.out.println (b1.getBalance ());
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(50);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.withdraw(1);
b1.deposit(10);
b1.withdraw(1);
System.out.println(b1.getStatement());
// This interface specifies the functionality
requirements of a bank
public interface Bank {
public abstract int openNewAccount(String
String customerName, String customerPIN, String
accType, double initDepAmount);
public abstract void processWithdrawal(int
(int accNum, String pin, double amount);
// executes a deposit on the specified acct by
t by the amount
public abstract void processDeposit(int accNum,
Num, String pin, double amount);
// returns the balance of acct
public abstract double processBalanceInquiry(int
(int accNum, String pin);
// returns summary of transactions
public abstract String
ring processStatementInquiry(int accNum, String
pin);
import java.util.ArrayList;
public class MyBank implements Bank
private ArrayList<BankAccount> savAccounts =
unts = new ArrayList<BankAccount>(); //dynamically
grows
private ArrayList<BankAccount> chkAccounts =
unts = new ArrayList<BankAccount>(); //dynamically
grows
private SavingsAccount sav;
private CheckingAccount chk;
private int accNum;
private String customerName, customerPIN,
erPIN, accType, pin;
private double initDepAmount, amount, balance;
public int openNewAccount(String customerName,
erName, String customerPIN, String accType, double
initDepAmount)
this.customerName = customerName;
this.customerPIN = customerPIN;
this.accType = accType;
this.initDepAmount = initDepAmount;
if ( accType.equals("Savings"))
BankAccount savAcct = new
vAcct = new SavingsAccount(customerName, customerPIN,
initDepAmount);
try
savAccounts.add(savAcct);
catch (ArrayIndexOutOfBoundsException
Exception savAccounts)
return savAcct.getAcctNum();
else
CheckingAccount chkAcct = new
hkAcct = new CheckingAccount(customerName,
customerPIN, initDepAmount);
try
chkAccounts.add(chkAcct);
catch (ArrayIndexOutOfBoundsException
Exception chkAccounts)
return chkAcct.getAcctNum();
public void processWithdrawal (int accNum,
accNum, String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.withdraw (amount);
if (accNum >50000 && accNum <60000)
sav.withdraw (amount);
public void processDeposit (int accNum, String
String pin, double amount)
this.accNum = accNum;
this.pin = pin;
this.amount = amount;
if (accNum >10000 && accNum < 20000)
chk.deposit (amount);
if (accNum >50000 && accNum <60000)
sav.deposit (amount);
public double processBalanceInquiry (int accNum,
String pin)
this.accNum = accNum;
this.pin = pin;
this.balance = 0;
if (accNum >10000 && accNum <20000)
balance = chk.getBalance ();
if (accNum >50000 && accNum <60000)
balance = sav.getBalance ();
return balance;
public String processStatementInquiry(int accNum,
m, String pin)
this.accNum = accNum;
this.pin = pin;
this.statement = "";
if (accNum >10000 && accNum <20000)
statement = chk.getStatement ();
if (accNum >50000 && accNum <60000)
statement= sav.getStatement ();
return statement;
Very bad style with those brace placements. Pick a style and stick with it. Consistency is the key.
Your code isn't very readable.
You don't have a SavingsAccount here anywhere, even though your MyBank uses one.
You use JDK 1.5 generics yet you've got ArrayList as the static type on those declarations. Better to use the interface type List as the compile time type on the LHS.
You have a lot of compile time problems, and some incomprehensible stuff, but I was able to change it enough to my TestCheckingAcct run to completion. No NPE exceptions.
I'm not sure I agree with your design.
No SavingsAccount. The accounts I have ALL incur fees - no need for a special interface there. Savings accounts are usually interest bearing. That's the way they behave differently from checking accounts. Where do you have that?
You rewrite too much code. If you put behavior in the abstract BankingAccount class (a good idea), the whole idea is that concrete classes that extend BankingAccount don't need to overload any methods whose default behavior is correct for them.
I don't know that I'd have separate Deposit and Withdrawal to implement Transaction. I'd make Transaction concrete and have starting balance, ending balance, and a transaction type String (e.g., "DEPOSIT", "WITHDRAWAL")
It'd be good to see some thought put into exception handling. I don't see an OverdrawnException anywhere. Seems appropriate.
No transfer methods from one account to another. I often do that with my bank.
That's enough to get started. -
How to automatically confirm check pay run (payment process request) in R12
Payment Method = check
The payment process profile (ppp) settings are as follows:
Processing Type=Printed
Payment Completion Point = When the Payment Instruction is Formatted
Default Payment Document= blank/null
Payment File=Send to File
My question is this. Is it possible or how do you configure oracle payments (PAYMENT PROCESS PROFILE [PPP] and/or PAYMENT PROCESS REQUEST [PPR])for check payments created as a file output like you have in 'EFT' instead of printing the checks and CONFIRM the PPR/payments AUTOMATICALLY after the checks/payments have been formatted.
The reason we are doing this is because we want an external agency to print the checks for my organisation.
What is happening at the moment is that the PPR runs and the payments file is created successfully. At this point, the PPR is in 'FORMATTED - READY FOR RECORDING' status. The PPR then remain in this status until it is manually confirmed by clicking the 'Take Action' icon in the 'payment instruction' tab and then clicking on 'CONFIRM'.
If the PPR is left in the above status, then the next submitted check pay run errors because the payment document(s) are still locked by the pay run that is in the 'Formatted - Ready for Recording' state.
If it is not possible to configure Oracle payments to auto confirm the check pay run of this type, is an API available that can be called to confirm check payments - once they are in the formatted status.
I've looked at the following notes in 'My Oracle Support', but they are not much use.
Note 1097547.1 is related to bug 8781032 which talks about "Automatic Initiate when Payment Process Request is Complete".
and then Note 1215392.1 relates to enhancement request.
Bug 10142423: GIVE AN OPTION IN PAYMENT PROCESS PROFILE TO SUBMIT POSITIVE PAY FILE AUTOMATIC
Thanks.Try running this SQL
SELECT
r.calling_app_id,
r.created_by,
r.payment_service_request_id,
r.creation_date,
r.call_app_pay_service_req_code,
fa.application_name,
fu.user_name,
r.payment_service_request_status
FROM
iby_pay_service_requests r,
fnd_application_vl fa,
fnd_user fu
WHERE r.payment_service_request_id = <<your concurrent request ID>>
AND r.calling_app_id = fa.application_id(+)
AND r.created_by = fu.user_id(+) -
Hi. When icloud first came out it worked well on all of my mac devices (macbook pro, ipad, iphones). However now it no longer works on my computer. When I go to system preferences it is unchecked and when I check to enable it, it tells me it can't. I also go to iCloud settings and when I check the photo stream box a few minutes later it is unchecked (which I never do). Please help.
Mmmm, I was hoping there might be a few more clues.
With little confidence you might try the following.
Reset photostream at iCloud.com.
Log out/in of iCloud on your Mac.
Trash your system preferences plist. -
Help: simple request bean question
Help!
I have a request scoped bean GroupHandler which has a list of groups and I display them in a dataTable. Each row is a link to the "viewGroup.jsp" page which shows a detailed view of the selected group.
Like so:
<h:dataTable value="#groupHandler.searchResults" var="group" >
<t:commandLink action="#{groupHandler.showView}">
<h:outputText value="#{group.name}" />
<t:updateActionListener property="#{groupHandler.selectedGroup" value="#{group}" />
</t:commandLink>
</h:dataTable>When I click the group name link, a breakpoint in the showView method gets hit, and the breakpoint in the setSelectedGroup method gets hit. And the user gets redirected to the correct "viewGroup.jsp" page.
The problem is the "viewGroup.jsp" page is trying to display the attributes of groupHandler.selectedGroup, but this object is null. I guess what's happening is t:updateActionListener is calling the setSelectedGroup method of request scoped GroupHandler #1, but viewGroup.jsp is accessing GroupHandler #2 which has a selectedGroup of null?
How am I expected to set the selectedGroup appropriately? Help!
Robert
PS. This appears to work fine when I scope the bean as "session", presumably because there's only one GroupHandler in the mix.I believe you are using apache tomahawk tags.
For your requirement, you can do some research on [t:savestate|http://myfaces.apache.org/tomahawk-project/tomahawk/tagdoc/t_saveState.html] tag. -
Checking box to see my saved passwords un-checks itself. Help pls?
All of a sudden I am unable to view any of my saved passwords within Safari (ver. 7.1) > Preferences > Passwords !
Whenever I check the box to “Show passwords for selected websites”, it instantly reverts the the box back to being “unchecked”, thus, making it impossible for me to see any and all of my saved passwords.
This has been an ongoing problem for quite some time now on this machine - first issue I think was roughly around April or May of this year. I somehow fixed it before but I can’t remember what it was that I did to rectify the problem.
Can somebody please help me out?
I have a MBP (mid-2012) running Mavericks ver. 10.9.5 (I’m not yet ready to update to Yosemite, JSYK) and the browser in question is Safari 7.1.
Thanks so much!Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions -
Error in Portal when checking MSS role, Help me how to solve?
In portal when I click on MSS I am getting an error like...
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
Exception in SAP Application Integrator occured: Unknown system alias. System Alias: 'SAP_ECC_Financials', User: 'SAPUSER', Reason: System Alias is not defined or permission denied for this user.
Exception id: 08:49_02/12/09_0001_63287050
See the details for the exception ID in the log file
How can I solve this?
Thanks,
Potru.hi potru,
does the user 'SAPUSER' has assigned roles which has permission for system 'SAP_ECC_Financials'.
hope this will help resolve your issue.
thanks
arun -
Availability check issue Please help
Hey Gurus,
We created a bunch of sales order with material 8000379 with the availabilty check in the material master as "02". We decided the change this to "KP" to no check and now we are not seeing a confirmation line for delivery in the sales order unless we delete the line item in the sales order and recreate. This is causing us a massive problem. We have almost 1000 sales order with this material that we woudl need to change. Is there anyway to reread the master data for this material?
Thing to note, this material is a subcontracted material and it has a PO against it so we can't just delete the line item and recreate it on the sales order. Is there a better solution than deleting the line item? We are desparate for a solution.
Sincerely,
NinaHi,
PLease go through the link below. hope this help.
http://www.sap-img.com/sap-sd/configuring-availability-check-through-checking-groups.htm
http://www.sap-img.com/sd028.htm -
CQ60 Optical drive check. Please help.
I have a Compaq CQ60-422DX laptop. I did an optical drive check through the HP Support assistant software. My DVD-RW drive is working fine (plays, rips, and burns CDs and DVDs as it should). I even checked the device manager for good measure. But when I used the optical drive check on the HP support assistant software, the result came on as "Action Needed," in terms of the reading check but it doesn't tell me exaclty what the reason is and it just directs me to the general Windows Help application. What seems to be the problem? please help.
Buy Disk Warrior and use it to repair your OS X volume (if it's repairable.) If DW cannot repair the volume then use Disk Utility to reformat the volume using the Zero Data (one pass) Security option.
Do you have a backup of your OS X volume? Since you have tried using TDM to access the drive without success it's reasonable to assume your data may be lost. If you have an external hard drive you can use, then you could attempt to use file recovery software to see if your data are recoverable.
At this point it is premature to assume the drive is bad since your Windows volume is functional. If you have Windows software for reading Mac drives you may try accessing the OS X volume from Windows.
Basics of File Recovery
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery. -
dear all ,
i am using the code .
data : begin of i_bidst OCCURS 0,
bidstd(10) type c , ( DEFINED BY ME)
bidst like zvesim-bidst, ( DATA DICTIONARY FIELD)
end of i_bidst.
i_bidst-bidst = 'A'.
i_bidst-bidstd = 'APPROVED'.
append i_bidst.
i_bidst-bidst = 'R'.
i_bidst-bidstd = 'REJECTED'.
append i_bidst.
i_bidst-bidst = 'S'.
i_bidst-bidstd = 'SUBMITTED'.
append i_bidst.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_BIDST.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'BIDST'
DYNPROFIELD = 'P_BIDST'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
VALUE_ORG = 'S'
TABLES
VALUE_TAB = I_BIDST.
the internal table consists of data what i had appended.
I want to know how display both the fields on value request but the selection field is DICTONARY field only For Description only I am using the user defined field.
regards,
balaji.parameters: p_bukrs(4) type c,
p_butxt(50) type c.
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
tabname = 'T001'
fieldname = 'BUKRS'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
tables
return_tab = return
exceptions
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
others = 5.
read table return with key fieldname = 'P_BUKRS'.
* Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
* Get the company code from db and add to dynpro
dynfields-fieldname = 'P_BUTXT'.
select single butxt into dynfields-fieldvalue
from t001
where bukrs = return-fieldval.
append dynfields.
* Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = dynfields
exceptions
others = 8.
start-of-selection.
Refer this too
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
Refer if this helsp.
http://sap.niraj.tripod.com/id27.html -
Where o Where is Buegie? Your help is requested!
I've seen you post about the organization of Itunes, and if you have a moment to help me understand, that'd be great.
As a test, I put a CD in my computer, selected a song, and then chose import. When Itunes was done, it had created a file folder and album folder under My Music/Itunes/Itunes Music and then placed the song in there. Is this the way it happens automatically even if the top two boxes under Preferences, General, Advanced aren't checked? Does this create a duplicate of all the songs under the My Music folder or just "arrange" them?
Thank you!!Amy,
Sorry for the delayed response - just saw your post.
iTunes will import a CD into the folder you specify in the 'Preferences'.
It will also use (what I believe) its default organizational structure of 'Artist\Album\Song'. This is independent of the checking or un-checking of the two boxes you mention. Some testing by me with the boxes checked, then unchecked appear to confirm this.
When importing a new CD, it will only create one copy of the music files on the PC and only one song reference within iTunes for each song. No duplicate copies should be made.
The second box with the 'copy' selection applies when one is 'Adding' music to the Library, not 'Importing' a CD. For instance, folks who have a self-designed music file structure on their PCs, and do not want to let iTunes re-arrange this structure would leave the 'organized' box unchecked, and the 'copy' box unchecked. There is no need for iTunes to move the files and certainly no need to re-copy the files.
Other folks have music stored in another structure (possibly for another music player) and also want iTunes to manage the music. They could have iTunes copy that music into its own structure when 'Adding' the music. It would create duplicate music files on the PC across different folders.
In my case, I run a Dual Library: Lossless files on my ExHD, and their Lossy counterparts on my internal Laptop HD. Occasionally, I will 'Refresh' the Library: deleting the references and re-Adding them. At that point, I have a Laptop destination for my iTunes music folder, but I do not need iTunes copying the ExHD's files over to the Laptop - just adding the references to the Library. I do not need the 'organize' box checked as the files/folders are already organized correctly.
I always leave the 'copy' box unchecked - unless I am 'Adding' some 'free MP3s' from Amazon or other sources. I usually place them initially in a separate folder, test them out and add the ones I like into iTunes. At that point, I need to check both the 'copy' box and the 'organize' box to get the files into iTunes correctly.
I hope I made some sense out of this, rather than confused you more. Post back with more questions if you have them.
Maybe you are looking for
-
Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios
-
Can I connect an external Hard drive to My IPAD to get additional MOvies for travel
I would like to download additional movies through my itunes on my IPad so I can watch while traveling. Is there a hard drive that will work with my IPAD and Itunes to download additional movies? Thanks so much. Skip
-
I needed to add the custom images in my BI dashboard and followed the same guidance provided on OTN threads to add the images in the 3 diffrent directory locations in my 11g setup. After Adding it to the 3 different path I restarted my presentation s
-
So I just picked up an Mac Mini 1.66ghz Intel Core Duo and Logic 7.2 when installing third party plugins , they are not even showing in the audio units manager , i would rather have them fail so at least they are recognized in the program ... cause t
-
Having some problems with Leopard (10.5.4 on a 2 GHz Core 2 Duo Macbook) 1. I cannot drag files anywhere at all (the icon will not move). I can, however, move files in terminal using mv. Drag works for highlighting but not for moving anything (can't