We have applications that can only use Java 6.x. Java 7 is not supported. Can Java 6.x be installed on OS X 7 and 8?

Our workplace (a large research university) uses both Win and Mac based desktops/laptops. We are about to deploy an enterprise-wide ERP system whose components are web-based. The components the components are support I.E. & Firefox browsers, so this is not a problem for the Mac OS X users. The components only support Java 6.x. Users of OS X 10.6.x and lower can use Java 6.x since Apple supports this. However, OS X 10.7 (Lion) and 10.8 (Mountain Lion) seem to only support Java 7.x which is not supported by our new ERP system.
Is it possible to install Java 6.x on OS X 10.7 and 10.8 desktops/laptops? I've viewed http://support.apple.com/kb/HT5493 but that doesn't specifically answer this question.

Thank-you everyone for your feedback. I think this is the story. If anyone can verify, thanks!!
Mac OS X 10.6 and lower has Java 6.x as part of the operating system and does not need to be separately installed (nor CAN it be separately installed).
Mac OS X 10.7 and 10.8 (“Lion” and “Mountain Lion”) do not have Java in the operating system. Therefore, users who need Java must go to java.com and install it themselves. However, only Java 7.x can be installed.
Upgrading from OS X 10.6 or lower to OS X 10.7 or 10.8 turns off Java (since it was part of the older OS which the user is replacing with a new OS). However, it seems that the older version of Java is still there, simply turned off. Running a bash shell (UNIX) script (http://support.apple.com/kb/HT5559) can remove Java 7.x and re-activate Java 6 to the latest version, Java 6.37. But this only works if the Mac ever had 6.x in the first place (i.e., was running OS X 10.6 or older).
Newer Macs (purchased after July 2011) came with OS X 7.x (“Lion”); after July 2012, 8.x (“Mountain Lion”). It may not be possible to install Java 6.x on these models without downgrading to OS X 6.x (10.6.8 is the latest version) which runs Java 6.37 for Mac.
An alternative is to configure your desktop/laptop as dual boot (e.g., with Paralles or Fusion VM) so you can run Windows-7 for apps that must use Java 6.x or, alternately, have OS X 10.6 and OS X 10.7 or higher on the same machine.

Similar Messages

How can we make the ms-word data as read-only using java code?

How can we make the ms-word data as read-only using java code?

MVSK wrote:
By using java code i opened a file in ms-word. But the data i want to display as read-only. that means should not change it.I don't think you can do that. Display pdf documents instead.

TS1474 I have found that i only have music i purchased left on my ipod. all of the music i uploaded to my PC has vanished from my ipod and my PC. How can i get it back ?

I have found that the only music left in my itunes library is the music i purshased from itunes. All the CDs i uploaded to my computer have vanished from both my ipod and my computer.
Will i have to upload all the CDs again or is there a way i can recover the lost content ?

If you can't find them
iTunes: Finding lost media and downloads
Then you will have to reimport them into your iTunes library.

I prepaid the creative cloud last year and now its time to update, but I notice that i only use about 5 of the apps, is there anyway and I can just purchased those.

I prepaid the creative cloud last year and now its time to update, but I notice that i only use about 5 of the apps, is there anyway and I can just purchased those.

No.
Cloud apps are only available via subscription via a Cloud plan.
If you need 3 or more apps then a Cloud Complete membership is the way to go.

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

Search application that can handle regular expressions

I am desperately seeking for my PhD an OSX 10.6 application that can search through all my data. That application need to have *efficient search algorithms* for complex pattern searching.
For example I want to search all my documents having the word cancer inside the file.
Not only search for the filename cancer BUT search inside the documents with all the extensions (pdf, rtf, doc, etc.)
In Windows I use +Filelocator Pro+.
Is there a Mac OSX application like +Filelocator Pro+ for search?
An application that can handle regular expression support, with any of the following options:
+Export results to Text, command line options, Network drive searching, Boolean searches (e.g. AND, OR, and NOT), Perl compatible regexp option, Built in file viewer, Word, Excel and PDF searching, Open Office, Word Perfect option using IFilters, Unicode support, support for: ZIP, RAR, CAB, 7-Zip, ARJ, Bzip, CHM, CPIO, DEB, DMG, GZIP, HFS, ISO, LZH, MSI, NSIS, RPM, TAR, UDF, WIM, XAR, Z formats, Active Scripting support, Export as Text, CSV, XML, HTML, or XSLT custom format, File attribute searching , Relative date/time searches, Repositionable contents pane, Search within search, Exclude folders list,+ etc

You might try the freeware EasyFind. It allows boolean and wildcard searches. How many of the other features in your "wish list" it offers I haven't checked. If EasyFind doesn't offer sufficient power, take a look at FoxTrot Personal Search or FoxTrot Professional Search.
And of course there's always grep which can be incredibly powerful once you learn all its ins and outs.
Regards.

May I know other application that can still locate my iPhone without internet connection

Someone stolen my Iphone5 in the office. I tried to locate the location of my iphone with my MAC AIR using icloud but I cant locate my gadget because Its already block and dot have internet connection. Now, just wanted to know if there are some application that can still locate with an internet connection?

Unfortunately the iPhone needs to be connected to the internet to get located.
Technically, it is possible to locate it if the phone based on it´s IMEI number when it is switched on. But only your carrier on request of the police will be able to do it. Being realistic, I doubt that they will do the effort
Maybe by chance the thief connects to the net....that´s the only way.
Sorry, I fear that´s bad luck!

After installing an application that was created using the Application Builder

After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?

No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others.

RMAN-05556: not all datafiles have backups that can be recovered to SCN

Oracle 11.2.0.2 SE-One
Oracle Linux 5.6 x86-64
Weekly refresh of a test db from prod, using rman DUPLICATE DATABASE, failed with “RMAN-05556: not all datafiles have backups that can be recovered to SCN”
Background Summary:
Weekly inc 0 backup of production starts on Sunday at 0100, normally completes around 1050. Includes backups of archivelogs
Another backup of just archivelogs runs on Sunday at 1200, normally completes NLT 1201.
On the test server, the refresh job starts on Sunday at 1325. In the past this script used a set until time \"to_date('`date +%Y-%m-%d` 11:55:00','YYYY-MM-DD hh24:mi:ss')\"; -- hard-coded for ‘today at 11:55’.
For a variety of reasons I decided to replace this semi-hard coding of the UNTIL with a value determined by querying the rman catalog, getting the completion time of the inc 0 backup. This tested out just fine in my vbox lab, even when I deliberately drove some updates and log switches during the period the backup was running. But the first time to go live I got the above reported error.
Details:
The key part of the inc 0 backup is this (run from a shell script)
export BACKUP_LOC=/u01/backup/dbprod
$ORACLE_HOME/bin/rman target=/ catalog rman/***@rmcat<<EOF
configure backup optimization on;
configure default device type to disk;
configure retention policy to recovery window of 2 days;
crosscheck backup;
crosscheck archivelog all;
delete noprompt force obsolete;
delete noprompt force expired backup;
delete noprompt force expired archivelog all;
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '$BACKUP_LOC/%d_%F_ctl.backup';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '$BACKUP_LOC/%U.rman' MAXPIECESIZE 4096 M;
sql "alter system archive log current";
show all;
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
backup as compressed backupset incremental level 0 database tag tag_dbprod;
sql "alter system archive log current";
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
list recoverable backup;
EOF
The archivelog-only backup (runs at noon) looks like this:
export BACKUP_LOC=/u01/backup/dbprod
$ORACLE_HOME/bin/rman target=/ catalog rman/***@rmcat<<EOF
configure backup optimization on;
configure default device type to disk;
configure retention policy to recovery window of 2 days;
crosscheck backup;
crosscheck archivelog all;
delete noprompt force obsolete;
delete noprompt force expired backup;
delete noprompt force expired archivelog all;
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '$BACKUP_LOC/%d_%F_ctl.backup';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '$BACKUP_LOC/%U.rman' MAXPIECESIZE 4096 M;
sql "alter system archive log current";
show all;
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
list recoverable backup;
EOF
And the original refresh looked like this:
>> a step to ftp the backups from the prod server to the test server, and some other housekeeping <<, then
cd /backup/dbtest
echo "connect catalog rman/***@rmcat" > /backup/dbtest/dbtest_refresh.rman
echo "connect target sys/*******@dbprod" >> /backup/dbtest/dbtest_refresh.rman
echo "connect auxiliary /"             >> /backup/dbtest/dbtest_refresh.rman
echo "run {"                           >> /backup/dbtest/dbtest_refresh.rman
echo "set until time \"to_date('`date +%Y-%m-%d` 11:55:00','YYYY-MM-DD hh24:mi:ss')\";" >> /backup/dbtest/dbtest_refresh.rman
echo "duplicate target database to DBTEST;" >> /backup/dbtest/dbtest_refresh.rman
echo "}" >> /backup/dbtest/dbtest_refresh.rman
So, my mod to the refresh was
bkup_point=`sqlplus -s rman/***@rmcat <<EOF1
set echo off verify off feedback off head off pages 0 trimsp on
select to_char(max(completion_time),'yyyy-mm-dd hh24:mi:ss')
from rc_backup_set_details
where db_name='DBPROD'
and backup_type='D'
and incremental_level=0
exit
EOF1`
cd /backup/dbtest
echo "connect catalog rman/***@rmcat"     > /backup/dbtest/dbtest_refresh.rman
echo "connect target sys/*******@dbprod"    >> /backup/dbtest/dbtest_refresh.rman
echo "connect auxiliary /"                >> /backup/dbtest/dbtest_refresh.rman
echo "run {"                              >> /backup/dbtest/dbtest_refresh.rman
echo "set until time \"to_date('${bkup_point}','YYYY-MM-DD hh24:mi:ss')\";" >> /backup/dbtest/dbtest_refresh.rman
echo "duplicate target database to DBTEST;" >> /backup/dbtest/dbtest_refresh.rman
echo "}"                                  >> /backup/dbtest/dbtest_refresh.rman
Now the fun begins.
First, an echo in the refresh script confirmed the ‘bkup_point’:
=======================================================
We will restore to 2013-08-25 10:41:38
=======================================================
Internally, rman reset the ‘until’ as follows:
executing command: SET until clause
Starting Duplicate Db at 25-Aug-2013 15:35:44
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=162 device type=DISK
contents of Memory Script:
   set until scn 45633141350;
Examining the result of LIST BACKUP (the last step of all of my rman scripts) the full backup shows this:
BS Key Type LV Size       Device Type Elapsed Time Completion Time
5506664 Full 61.89M     DISK        00:00:03     25-Aug-2013 02:11:32
        BP Key: 5506678   Status: AVAILABLE Compressed: NO Tag: TAG20130825T021129
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-00_ctl.backup
SPFILE Included: Modification time: 24-Aug-2013 22:33:08
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45628880455   Ckp time: 25-Aug-2013 02:11:29
BS Key Type LV Size       Device Type Elapsed Time Completion Time
5507388 Incr 0 206.03G    DISK        08:30:00     25-Aug-2013 10:41:30
List of Datafiles in backup set 5507388
File LV Type Ckp SCN    Ckp Time             Name
1    0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/datafile/system.258.713574775
>>>>>>>>> snip lengthy list <<<<<<<<<
74   0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/event_i2.dbf
Backup Set Copy #1 of backup set 5507388
Device Type Elapsed Time Completion Time      Compressed Tag
DISK        08:30:00     25-Aug-2013 10:41:36 YES        TAG_DBPROD
    List of Backup Pieces for backup set 5507388 Copy #1
    BP Key Pc# Status      Piece Name
    5507391 1   AVAILABLE   /u01/backup/dbprod/eeoi55iq_1_1.rman
    >>>>>>>>>>>>> snip lengthy list <<<<<<<<<<<
    5507442 52 AVAILABLE   /u01/backup/dbprod/eeoi55iq_52_1.rman
Notice the slight difference in time between what is reported in the LIST BACKUP and what was reported by my query to the catalog.
Continuing with the backup list, the second archivelog backup in the script generated six backupsets. The fifth set showed:
BS Key Size       Device Type Elapsed Time Completion Time
5507687 650.19M DISK        00:02:18     25-Aug-2013 10:54:53
        BP Key: 5507694   Status: AVAILABLE Compressed: YES Tag: TAG20130825T104156
Piece Name: /u01/backup/dbprod/ekoi643j_1_1.alog
List of Archived Logs in backup set 5507687
Thrd Seq     Low SCN    Low Time             Next SCN   Next Time
1    1338518 45632944587 25-Aug-2013 05:58:18 45632947563 25-Aug-2013 05:58:20
    >>>>>>>>>>>>> snip lengthy list <<<<<<<<<<<
1    1338572 45633135750 25-Aug-2013 10:08:21 45633140240 25-Aug-2013 10:08:24
1    1338573 45633140240 25-Aug-2013 10:08:24 45633141350 25-Aug-2013 10:30:06
1    1338574 45633141350 25-Aug-2013 10:30:06 45633141705 25-Aug-2013 10:41:51
1    1338575 45633141705 25-Aug-2013 10:41:51 45633141725 25-Aug-2013 10:41:55
Notice the availability of the archivelogs including the referenced scn.
Investigation of the ftp portion of the refresh script confirmed that all backup pieces were copied from the prod server.
So what am I overlooking? Having reverted back to the original script to get the refresh completed,

HemantKChitale wrote:
So, technically, you only need the database and archivelogs backed up by the database script and not the noon run of the archivelog backup.
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
backup as compressed backupset incremental level 0 database tag tag_dbprod;
sql "alter system archive log current";
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
Yet, why does backupset 5 of the noon archivelog backup show archivelogs from 10:30 to 10:40 if they had been deleted by the database backup script which has a delete input ? It is as if the database backup script did NOT delete the archivelogs and the noon run was the one to backup the archivelogs (again ?)
No, that is from the morning full backup. Note the 'Completion Time" of 25-Aug-2013 10:54:53
However, the error message seems to point to a datafile. Why would reverting the recovery point to 11:55 make a difference, I wonder.
As do I.
Also puzzling to me are the times associated with the completion of the backups. I don't recall ever having to scrutinize a backup listing this closely so I'm sure it's just a matter of filling in some gaps in my understanding, but I noticed this. The backup report (list backup;) shows this for the inc 0 backup:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507388 Incr 0 206.03G
DISK
08:30:00
25-Aug-2013 10:41:30   ------- NOTE THE COMPLETION TIME ----
List of Datafiles in backup set 5507388
File LV Type Ckp SCN
Ckp Time
Name
1
0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/datafile/system.258.713574775
------ SNIP ------
74   0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/event_i2.dbf
Backup Set Copy #1 of backup set 5507388
Device Type Elapsed Time Completion Time
Compressed Tag
DISK
08:30:00
25-Aug-2013 10:41:36 YES
TAG_DBPROD   ------- NOTE THE COMPLETION TIME ----
List of Backup Pieces for backup set 5507388 Copy #1
BP Key Pc# Status
Piece Name
5507391 1   AVAILABLE   /u01/backup/dbprod/eeoi55iq_1_1.rman
------ SNIP ------
5507442 52 AVAILABLE   /u01/backup/dbprod/eeoi55iq_52_1.rman
Then the autobackup of the control file immediatly following:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507523 Full
61.89M
DISK
00:00:03
25-Aug-2013 10:41:47   ------- NOTE THE COMPLETION TIME ----
BP Key: 5507587   Status: AVAILABLE Compressed: NO Tag: TAG20130825T104144
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-01_ctl.backup
SPFILE Included: Modification time: 25-Aug-2013 05:57:15
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45633141671   Ckp time: 25-Aug-2013 10:41:44
Then the archivelog backup immediately following (remember, this created a total of 5 backupset, I'm showing number 4)
BS Key Size
Device Type Elapsed Time Completion Time
5507687 650.19M
DISK
00:02:18
25-Aug-2013 10:54:53   ------- NOTE THE COMPLETION TIME ----
BP Key: 5507694   Status: AVAILABLE Compressed: YES Tag: TAG20130825T104156
Piece Name: /u01/backup/dbprod/ekoi643j_1_1.alog
List of Archived Logs in backup set 5507687
Thrd Seq
Low SCN
Low Time
Next SCN   Next Time
1
1338518 45632944587 25-Aug-2013 05:58:18 45632947563 25-Aug-2013 05:58:20
------ SNIP ------
1
1338572 45633135750 25-Aug-2013 10:08:21 45633140240 25-Aug-2013 10:08:24
1
1338573 45633140240 25-Aug-2013 10:08:24 45633141350 25-Aug-2013 10:30:06
1
1338574 45633141350 25-Aug-2013 10:30:06 45633141705 25-Aug-2013 10:41:51
1
1338575 45633141705 25-Aug-2013 10:41:51 45633141725 25-Aug-2013 10:41:55
and the controlfile autobackup immediately following:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507984 Full
61.89M
DISK
00:00:03
25-Aug-2013 10:55:07   ------- NOTE THE COMPLETION TIME ----
BP Key: 5508043   Status: AVAILABLE Compressed: NO Tag: TAG20130825T105504
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-02_ctl.backup
SPFILE Included: Modification time: 25-Aug-2013 05:57:15
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45633142131   Ckp time: 25-Aug-2013 10:55:04
and yet, querying the rman catalog
SQL> select to_char(max(completion_time),'yyyy-mm-dd hh24:mi:ss')
2 from rc_backup_set_details
3 where db_name='DBPROD'
4 and backup_type='D'
5 and incremental_level=0
6 ;
TO_CHAR(MAX(COMPLET
2013-08-25 10:41:38
SQL>
which doesn't match (to the second) the completion time of either the full backup or the associated controlfile autobackp.
Hemant K Chitale
I hope this posts in a readable, understandable manner. I really struggeled with the 'enhanced editor', which I normally use. When I pasted in blocks from the rman report, it kept trying to make some sort of table structure out of it .... guess I'll have to follow that up with a question in the Community forum ....

HT4847 My Ipad says that i am running out of storage but my icloud says that ive only used 1.4gb of the 5 allotted and when i go to usage manage storage all my apps are turned t the on postpition for backup. So i dont nderstand why my ipads storage is bei

My Ipad says that i am running out of storage but my icloud says that ive only used 1.4gb of the 5 allotted and when i go to usage manage storage all my apps are turned t the on postpition for backup. So i dont nderstand why my ipads storage is being used

iCloud doesn't give you more storage on your device, it only gives you more storage in iCloud to sync data, store your backups, etc. If you're running out of space on your iPad you'll have to delete some data off your iPad to free it up, such as syncing some of your music or other media off your iPad.
You can check how much free space is available on your iPad by going to Settings>General>Usage and looking at the Available number at the top.

I have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

Your redemption code was used to acquire an activation code. The activation code is what you need to use when you want to reinstall/enable the software again. Check your Adobe account online to see if the number(s) can be found there.

Is there an application that can batch convert wma to m4a and save the output files to their respective original file location?

I need to convert thousands (yes, really) of wma files to m4a. The wma files are all located in different folders and each converted m4a file needs to end up in the same folder as its respective original wma file. Does anyone know of an application that can do this?
Thanks,
Will

I'm not completely sure that MPEG Streamclip can convert AVCHD footage (.mts files). If MPEG Streamclip doesn't do the job, then get a copy of Clipwrap, which was designed for transcoding .mts files to QuickTime/Apple Intermediate Codec (that's the format/codec you need to convert the .mts files to for use in FCE).

What do i do my ipod is a white screen when i try to turn it on and part of the image of my back ground pops up. I dont know what to do. Please comment if you have something that can help. Its a gen four.

when i try to turn on my gen four ipod, a white screen appears. Parts of my back ground pop up.All this started to happen when i dropped my ipod when i took it out of the case. Please comment if you have something that can help me. thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I want to hide the highlighter on the desktop which shows all the application that we are using .

i want to hide the highlighter on the desktop which shows all the application that we are using .

http://25.media.tumblr.com/tumblr_l6n913mhxf1qd573oo1_500.jpg

HT3574 is there any application that can help my iphone 3GS with personal hotspot or tethering internet?

is there any application that can help my iphone 3GS with personal hotspot or tethering internet?

You don't need anything, as such is built directly into the iOS. Your carrier, however, needs to support such.

We have applications that can only use Java 6.x. Java 7 is not supported. Can Java 6.x be installed on OS X 7 and 8?

Similar Messages

Maybe you are looking for