We have missing CRM survey data on our report. .

Hi,
We have missing CRM survey data on our report. .(BI report)
After further investigations, we have found out that the data is not being extracted by our CRM BI extractor
0SVY_DATA_1 (CRM Survey Results).
Is there is any problem related to CRM configuration.
The survey is a valid survey .
Please mention your inputs.wat can be the problem here, or anybody suggest any solution
Thanks & Regards
Prajith P
Edited by: Prajith Prabhakara on Sep 28, 2011 12:39 PM

Hi,
I am closing the issue.
Thanks
Prajith P

Similar Messages

  • CRM Survey Data Extraction

    Hi,
      I am going to extract CRM Survey data.The questionnaire is created in CRM using CRM_SURVEY_SUIT and the same is used in opportunity transaction. I  am using 0SVY_DATA_1 to extract the survey data.But the keyfigure values filled in the survey form are not getting captured in the datasource.Please let me know where exactly the answers in questionnare are getting stored in CRM.
    Thanks&Regards
    Hasini

    Hello everyone,
    I am also facing the same problem. Is there any conversion rule in BI to convert this XML format into readable Format?
    Regards
    Vivek

  • CRM Survey data

    Hi all,
    I got a requirement to develop a report on solution manager survey data.
    i found the data sources 0SVY_ANSWER_TEXT
    0SVY_APPL_TEXT
    0SVY_DATA_1
    0SVY_QSTNNR_TEXT
    0SVY_QUEST_TEXT
    0SVY_STATUS_TEXT
    0SVY_SURV_TEXT
    0SVY_TAROBJ_ATTR
    in solution manager.And I instal al the data sources in bw.now can any one suggest me how to move further I mean which ods should i need to install.
    These data sources are fetching the data which is standard,but i need the transactional data which daily users updates.
    I found four tables in solution manager CRM_SVY_DB_SV,CRM_SVY_DB_SVS,CRM_SVY_RE_QUEST,CRM_SVY_RE_ANSW.
    From the first two table the field value Guid is common,and from the last two tables QUEST ID field is common.But I am not able to find any common among these tables.
    Can any one please suggest me what is the best way to follow whether to install standard data source or to create a generic data source from these four tables.
    can any one
    please help me in this issue.
    Sridath..
    Edited by: sridath on Jul 24, 2009 11:56 AM

    Hello everyone,
    I am also facing the same problem. Is there any conversion rule in BI to convert this XML format into readable Format?
    Regards
    Vivek

  • CRM survey extraction

    Hi Experts
    I am trying to extract CRM survey data from a CRM 3.1 system by using a BW 3.5 system. Surveys have been created and saved. I have set the Evaluate in BW setting for the survey in CRM.
    I do not get any data out when using RSA3 or by using infopackages. Is there another setting I have to set? Does the survey need to be executed before I can extract the texts and attributes?
    Kind regards
    Erik

    Hi, All
    I also met this problem.
    Finally, my colleague found the solution.
    To solve this problem, you activate "Evaluation in BW" first.
    However, you might have no result in "0SVY_DATA_1".
    I think the reason is you testing.
    You might follow this control:
    "Generate URL" -> "Generate URL" -> "Test URL"in dialog box.
    The use of "Test URL" was problem why no data was stored in "0SVY_DATA_1".
    You should copy the generated URL and paste the URL on address window of Explorer.
    Then put your answer on questionnaire and save it.
    Last, you can see the stored data in "0SVY_DATA_1".
    Test was just "TEST".
    Regards,
    Han Kyu

  • Steps to Extract CRM Surveys to BW

    Hi Gurus,
    My requirement is to extract CRM Surveys, which are attached to Activities transaction with tab questionarrie, into BW. I have checked in datasource 0SVY_DATA_1 as well as in other datasources too but I can see that they are stored in the database tables CRM_SVY_DB_SVS and CRM_SVY_DB_SD. Would anýone suggest me what are the steps i need to follow inorder to extract the data from CRM Surveys data in Activities to BW. I appreciate it in advance.
    Thanks a lot
    Regards
    Kishore.

    Hi kishore!
    in CRM..
       go to transaction CRM_SURVEY_SUITE and check the properties of your survey make sure the "evaluation in BW" option is enabled.
      implement the datasources required in RSA5
    in BW...
      Replicate datasources
      implement the Datflow and Data targets required in BW you can use the following Content help http://help.sap.com/saphelp_nw04/helpdata/en/a5/73863c593a8767e10000000a114084/frameset.htm
    You can then extract the survey data.
    with regards
    ashwin

  • Standard Business Content & Data Targets for Case Management & CRM Survey

    Dear Friends,
    We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following:
    1. Case Management
    2. CRM Survey (We have already been able to identify Data targets in BW3.5 for Web Survey & in CRM 2007 we have been able to identify Data targets for CRM Survey, as well as Web Survey. Our requirement is identifying Data Target for CRM Survey)
    Please guide.
    Regards,
    Rajesh Banka

    hi,
    You can find the planning scenarios related to planning ifor CRM at this link http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
    You can also find the details on demo content for the same at http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
    Regards,
    Deepti

  • I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?

    Hi,
    I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
    So and idea of way I dont get data from or servers? Missing client setting for servers?
    /SaiTech

    Hi,
    I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
    /SaiTech

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • When I click Buy Book this appears our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue? will the text I have sellected still be ok or will the book have missing text help Pleas?

    I just spent 3 days creating a book [32 pages], with photos and text but when I click Buy Book In iPhoto this appears>
    Our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?
    My question is will the text I have sellected to use still be ok, am I safe to continue and buy or will the book have missing text ?
    The book is for special birtday in 2 weeks time  Please Help.G
    <Email Edited by Host>

    Yes, you're safe to continue.  That means that there are text boxes that you did not put any text into and they contain the holding text which will not be printed.  That text is shown in a light grayt and is in Latin.  Normally you can just put a space in the text box to replace the holding text so as not to get that warning message.
    Before ordering the book proof the book according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Check the pdf file for any missing text or photos and any warning indicators in the text boxes indicating that some of the text has exceeded the space allotted in the text box.
    Keep the pdf file to compare with the printed copy when you reciive it.
    OT

  • HT4850 I seemed to have missed the whole ordeal of keeping my 10.4.11 os x powerpc up to date.  Are these suggestions still viable as I have been getting all sorts of console errors which now seem to lead me to this researched destination?

      I seemed to have missed the whole ordeal of keeping my 10.4.11 os x powerpc up to date.  Are these suggestions still viable as I have been getting all sorts of console errors which now seem to lead me to this researched destination?  The suggestions involve putting "sudo"  in Terminal Application and I am assuming that with all the console errors now being generated by my "permissions fixer" that this might be the reason...missed the class and updates as I never had problems like these before and the technology is changing.  Have a whole list of console errors if someone is willing to help as I also think I have hit the motherload as to the reasons why?!

      I seemed to have missed the whole ordeal of keeping my 10.4.11 os x powerpc up to date.  Are these suggestions still viable as I have been getting all sorts of console errors which now seem to lead me to this researched destination?  The suggestions involve putting "sudo"  in Terminal Application and I am assuming that with all the console errors now being generated by my "permissions fixer" that this might be the reason...missed the class and updates as I never had problems like these before and the technology is changing.  Have a whole list of console errors if someone is willing to help as I also think I have hit the motherload as to the reasons why?!

  • Why doe Resample waveforms (continous​).vi have missing data

    I am using the Resample Waveforms (continous).vi to resample waveforms at a slower rate than the acquisition is taking place.  I am doing this because I am using an NI-9237, which has a minimum sampling rate of 1612.9 Hz.  I am acquiring from up to 12 channels of AI and resampling the array of waveforms.  When I save the output of the resampling VI to a file, some of the channels have missing data for a given timepoint and sometmes the timepoint will be off.  I have removed the Reasmple VI and I do not see this problem. 
    I have attached a screenshot of my VI and of the saved data file (time is leftmost column, one column for each channel).
    Dan
    Attachments:
    Resample.png ‏103 KB
    Resample - data.png ‏130 KB

    Amit,
    I ran some more tests.  I should have mentioned I was using a simulated device (as I do not have the actual hardware yet) to troubleshoot my application.  I happen to have another peice of "real" hardware that I tried and I cannot seem to duplicae the issue with it.  I need to wait for my actual cDAQ to arrive before I can be sure, but this seems to be the problem.  It still doesn't make sense to me since using the simulated device without the Resmaple VI produces accurate "simulated timepoints.  It's when I introduce the Resample that I have problems. 
    Thanks
    Dan

  • CRM survey - link to originating document.

    Our scenario is:
    Upon marking an activity document within CRM as complete, we want to send a completion notification to the customer along with a URL that links to the survey to collect feedback on the service. The scenario is for the IT department wanting to monitor it's performance and the customers are internal employees.
    We have an action that is triggered upon marking the activity document as complete. We have a survey created and have 'hardcoded' the survey URL in this smartform. We are currently getting responses and we see the data within the CRM_SURVEY_SUITE display.
    We now want to move on to the next step i.e. tying the response back to the activity document for which the response is received. I read about how an MIG can be used but am still a little confused.
    Can you offer some suggestions?
    Thanks and Regards,
    Kevin.

    Hi Kevin,
    I need your help. right now i m too working on a similar scenario, were i send an URL link to the customer through mail, that has been set up as an action that gets trigger once the order is completed.
    Now i am in process of fetching those results answered by the customer in the given questionaire and display it in my CRM report.
    As this is really urgent, would appreciate and be thankful to you, if you could provide me ur valuable suggestions to going ahead.
    Please understand I m in an urgent need of this and unable to proceed.
    Please let me how to retrieve those results and display in my report.
    Thanking you in advance.
    Hari

  • CRM Survey Extraction to BW

    Hello,
    I have created a questionnaire under marketing in the survey tool in crm (crm_survey_suite tcode). Now i have activated and generated a URL for this and embeded this URL in my mail form. Also I have selected the option "Evaluation in Business Information Warehouse" in the settings of the questionnaire.
    Now the user enters data by opening this questionnaire and the status says that the values are successfully saved. Everything fine till here. Now my question is what are the sequence of steps needed to bring this data into my BW system?
    I went to the transaction RSA3 and tried to do an extract of 0SVY_DATA_1 object. For the application i did an F4 help and got CRM_MARKETING_SURVEY but for the F4 help of QSTNNR it does not give anything. So I entered this value manually as "ZONLINE_CUSTOMER_FEEDBACK" and clicked on extraction. This gives an error as "Errors occurred during the extraction".
    Then i went to Display logs and saw the detailed error as "The extraction program does not support object 0SVY_DATA_1"
    Can you please let me know if I have missed any steps in the process?
    Another information is that I can see the data correct in the SVY tables in CRM.
    Any help is greatly appreciated.
    Regards,
    Pradeep

    Hi Amit,
    The procedure is that first create the survey and then maintain the settings of the survey. After the settings are done only then you need to activate the survey, else the settings made via Ctrl+F12 will not be used. If you have already done the activation without making the settings then you will need to edit the survey save it first and make settings and reactivate the survey. This however will create a new version. Care needs to be taken in production that the data of earlier version may become unusable with the latest version because every new version will create a new URL. If you see the URL in the browser u will get an idea of the version management.
    Hope this helps.
    Regards,
    Pradeep

  • CRM survey - link to original document.

    We create an repair order in CRM and send an URL link for an survey to collect feedback on the service to the customer through mail, that has been set up as an action that gets trigger once the order is completed.
    We have an action that is triggered upon setting the status of the order document as complete. We have a survey created and have 'hardcoded' the survey URL in this smartform. We are currently getting responses and we see the data within the CRM_SURVEY_SUITE display.
    Now i am in a process of fetching those results answered by the customer in the given questionaire and display it in my CRM report.
    As this is really urgent, would appreciate and be thankful to you, if you could provide me ur valuable suggestions to going ahead.
    Please help me how to retrieve those results and display in my report.
    Thanking you in advance.
    Hari

    Hi Kevin,
    I need your help. right now i m too working on a similar scenario, were i send an URL link to the customer through mail, that has been set up as an action that gets trigger once the order is completed.
    Now i am in process of fetching those results answered by the customer in the given questionaire and display it in my CRM report.
    As this is really urgent, would appreciate and be thankful to you, if you could provide me ur valuable suggestions to going ahead.
    Please understand I m in an urgent need of this and unable to proceed.
    Please let me how to retrieve those results and display in my report.
    Thanking you in advance.
    Hari

  • CRM Survey on Web - Submit button not working.

    Hi Gurus,
    We have created a Survey in CRM_Survey_suite. The Problem is, when we send the survey with one Question (mail goes out with a link, user click on the link and link take them to our QA Server BSP Page), the submit button is working but when we send survey with more then one question the submit button is not working (When we click, nothing happens), however the RESET button is working fine.
    Another interesting thing is, surveys with multiple questions are working fine in our Dev environment (The initial setup in dev was done by another consultant who is no longer with us).
    I am not an expert in this area and i have checked every single config that i know in DEV and in QA to my knowledge and the config is identical.
    Pls help.
    Thanks
    Nadeem.

    Hi,
    We are on CRM 4.0 with following support packs.
    SAP_BASIS     620             0054    SAPKB62054
    SAP_ABA             620             0054    SAPKA62054
    BBPCRM             400             0009    SAPKU40009
    PI_BASIS     2004_1_620     0010     SAPKIPYI5A
    ST-PI             2005_1_620     0003     SAPKITLQG3
    CRMIS             400             0004     SAPK-40004INCRMIS
    ST-A/PI             01G_CRM400     0000          -
    Regards.

Maybe you are looking for