We want to cancell Intercompany Billing document

We want to cancel intercomapny billing documents, update the sales order and rebill
Amit Mahajan
Edited by: mahajan.amit.s on Oct 19, 2010 3:13 AM

Hi,
What is the problem here.
I think you can cancel any invoice type in VF11 as long as it is enabled for cancellation with a cancellation document type in VOFA. For intercompany billing type it is IVS.
You can cancel the IV document using IVS in VF11 and then rectify your problem in the sales order (only invoice related, not delivery related. If you are changing delivery related information, you have to cancel the delivery also including PGI, Picking etc) and then create the invoice once again.

Similar Messages

Cancel of Billing DOcument

We are using SAP 6.0
When we want to Cancel the Billing DOcument the system is not considering whether the Excise Invoices has been cancelled or not.
Please help
Thanks
nitin

Hi,
You have to go for enhancement.
if the status of the billing document is reffered for excise invoice.the system should not allow you to cancel that billing.so in this case first u should cancel the excise invoice and than you can cancel the billing document.
if the status of the billing is not reffered,the system will allow you to cancel the billing document.

Cancellation of billing document with out cancellation of excise invoice

Dear Sir,
I want to control the cancelation of billing doccument. Condition is that with out cancellation of excise invoice there should not be any cancellation of billing document and delivery document.
REgards
Bharat

You can try with Routines
Create a routine (can take the routines no 5 / 6 as reference to create the new routine and mention not to cancel the billing doc if it is referenced to create any excise invoice) and assign the same in the required billing type definition.
Thanks
Harikishan

Intercompany billing document setup

Hi,
      I would like to enquire on intercompany billing document setup.
      We have customized billing type ZIV for intercompany invoice, and ZIG for intercompany credit memo.
       Is is possible to set up the cancellation for each billing type as
          - ZIG for ZIV and
          - ZIV for ZIG
min

Hello MIN,
For practice & understanding or test purpose, this can be ok.
But, in actual or real time scenario, I don't think it hold good.
See, you said ZIG is a Credit Memo for Inter-company right?
How you are going to use it for cancellation?
As I know, a Credit Note or Credit Memo is a document used to adjust or rectify errors made in a sales invoice which has already been processed and sent to a customer. If you have already sent an invoice to a customer but now need to provide a credit for that invoice, you would send them a Credit Note or Credit Memo. You can think of a credit note as a "negative invoice."
But not CANCELLATION INVOICE.
Logically, if you see, there will be a number range issue. So, just visualise, when you have to book an actual credit note, then what you are going to do? And how is you end user and auditor is going to recognize the credit memo?
For your your purpose of having a different cancellation doc for inter-company sales invoice and credit memo, you can create a Z Cancellation Billing Doc, say, ZIC and assign it to ZIV & ZIG billing Doc.
Hope it assist you.
Thanks & Regards
JP

Manual change / copy currency in intercompany billing document

Hi,
We are running the SD intercompany process, where 'F1' is the customer invoice billing document type and 'IV' is the intercompany billing document type.
The currency in billing document type 'F1' is derived from the final customer master data, whereas the currency in billing document 'IV' is taken from the intercompany customer master data. We would like the currency in billing document 'IV' (intercompany) to be the same as the one in 'F1'. It is the Finance team business requirement.
Is it possible to have the currency copied from 'F1' to 'IV'. We would also be happy to manually change the currency in 'IV'.
Please advise which settings are required - if this is even possible.
Thank you,
Karol
Edited by: Karol on Jun 17, 2010 12:07 PM

Hello Karol
Why do you want to get into copy controls etc,, when you can simply set up the Intercompany customer's currency based on the customer's (Sales Org) country.
Let me explain. US Company is selling to US customer from a Plant in Switzerland. Real customer is set up with USD in US sales area. The Inter Co Customer created in Swiss Sales Area should be set up with USD as currency based on the country of the Inter Co customer. This is how it is set up in my current client's setup and is working. The only issue you may get is when US is supplying to an International customer based in UK, then you will run into issues, I am assuming you don't have any such cases.
If the customer master set up idea does not work for you, then I guess your only option are user exits during Billing document creation or copy control routines.
Proposals:
1) USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC). Yo can try filling up VBRK-WAERK with VBAK-WAERK.
2) Alternately you may insert the same logic in Include LV60AA95 for program SAPLV60A. This is supposed to be part of the copy control routines but I don't know how it is called etc. It does not appear to be filled in the copy control config. I got the inspiration for this from OSS note 358893 which was meant for Euro conversion, Same concept so why not use it?
3)Thirdly in the area of copy control (Delivery- Billing Document) itself, for the item category, set up a custom routine in the feild Data VBRK/VBRP and insert code there to replace the Document currency with that from the sales order. You may also want to set up the PricingExchRate type field also with a suitable value right here itself. Only doubt is whether this works for only item or for header also as the field name (VBRK/VBRP) indicates.
Review the following OSS note 358893 - Create billing document with different document currency for more on proposal 2.
Keep us posted on how you are proceeding with the solution.
Please keep us posted with how you are proceeding on the solution.

How to get intercompany billing document number

Hi,
I have PO number , Delivery number for a given shipping plant and receiving plant.I want to get the intercompany billing document number.Is there any method to fetch.Can anyone suggest me how to proceed with this.Intercompany billing document number can be obtained from VBRK-vbeln for type that is VBRK-fkart = iv .But how to relate PO number and delivery number with this.
Regards,
Sowmya.

Hi Friend,
Yes you can check though billing type IV.
Gereally in inter company billing, we generally create a customer in the receiving company. Try to know the name of the customer (generally it is one and fixed) from functional consultant, and pass to bill to party, it will help to reduce lot data.
I thnik delivery has been created through refrence of PO.
You can get PO and delivery number if it is stored in the text of Billing doc.
Consult with functional guys and tell them to store these numbers.
Regards
Krishnendu Laha

Error while cancelling the billing document in MR08

hello every one,
I am not able to cancel the billing document in MR08.it throws the following error:
Field COBL-PPRCTR. does not exist in the screen SAPLKACB 0002
Message no. 00 349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data.
Any suggestions are welcome.
Thanks in advance.

Hi
Use the T.code: VF11 to cancel billing document
Reward if it helps
Regards
Prasanna R

Procedure to cancel a Billing document

Hi All,
I like to get the procedure to cancel a billing document whose accounting document shows a status "Cleared". Is this possible?
If so how to proceed. If I need to cancel the accounting document and then billind document, kindly guide me to proceed.
Thanks & Regards,
Arunkumar S

Hii Arun ,
check the FM <b>EXIT_SAPLV60B_008</b> in the user-exit <b>SDVFX008</b>
IF 'N' = vbrk-vbtyp.
" your logic
if SY-SUBRC <> 0 .
MESSAGE E000 WITH ' NOT SUCCESSFUL '.
ENDIF.
also
In configuration of the billing document type, there is a section for 'cancellation'

Automate creation of Intercompany billing document

Hello All,
We have a requirement to automate the intercompany billing document to be created whenever F2 billing document is created ( without using VF04).
Any input regarding this will be greatly appreciated.
Thanks,
Nagaraju

After goods issue has taken place, you can process the delivery for billing. You can create the billing documents just like any other billing document on the Billing screen:
for a single billing document with the menu path Billing document ---Create.
for several billing documents with the menu path Billing document -
Billing due list.
The delivery may have to be processed for billing twice.
The delivering plant processes the delivery to create an intercompany billing document (billing document type IV) for the selling company. This company code posts invoice entry for this billing document.
The billing document is automatically billed to the internal payer that is assigned to the sales organization. The intercompany charges that appear in the intercompany billing
document represent the actual amount that the delivering plant is charging the sales organization.
If the selling company is selling the goods to a customer, it processes the delivery to create an invoice for this customer. The system can take the prices from the order or determine new prices. It takes the quantity to be invoiced from the delivery.
The billing due list for the intercompany invoice is generated after the customer invoice has been created.

Incoterms in Intercompany Billing Document

My Dear SAP Mentors,
Can you please let me know that from where in "Purchase Order" incoterm appears at item level...
In the concerned PO at Header level there is a seperate incoterm for e.g. DDP Jyderup...I know this comes from the vendor master record.
There are two items in the concerned PO...
I am confused as when I go to item details Delivery tab then for one Material say 212244 incoterm comes as DDU gebze and for another Material say 253264 incoterm comes as EXW Poland.
1) Any idea from where this is coming...?
2) Which incoterm should appear at the intercompany billing document ?
3) Is it correct to have a incoterm from customer master record (Ship to party) in the intercompany billing document.
4) Else please let me know the standard setup or incoterm get affected by copy control in documents.
Requesting you all to kindly help me on above queries...
Best answers would be appreciated by full points...
Thank You !
Best Regards,
Anubhav

Hi,
1) Any idea from where this is coming...?
- This could be from Info record. Use T.code ME12 to check the inco term for the particular vendor + material combinations. You can view the details under Purchase organization data1.
2) Which incoterm should appear at the intercompany billing document ?
- Ship-to party inco term.
3) Is it correct to have a incoterm from customer master record (Ship to party) in the intercompany billing document.
- This is correct
Regards,

Account determination in cancellation of billing document (VF11)

Does anybody know if it's possible that a new account determination was carried out when cancelling a sd-billing document with VF11 transaction?
Now, if we cancel a billing document the FI all relevant data is copied from the billing document to be cancelled. We'd like that a new account determination is carried out when cancelling the billing document.
Thank you very much.
Alberto.

I'll try to explain in more detail the issue. Before January 2008, a society doesn't work with FI in SAP but only with logistics areas. Billing documents were created with an standard and not real account determination. Now, this society is working with FI in SAP and we have customized the correct and real account determination. Some times, an old billing document (posted before January 2008) has to be cancelled but the corresponding FI document takes the incorrect accounts.
Thank you very much.
Alberto

Accounting document cleared upon cancellation of billing document

Hi Guru,
When I cancel a billing document, the corresponding accounting document in AR should be cleared automatically.
I have some cases that when I cancel the billing document, the system responds with msg. " Automatic clearing of the billing document and cancellation is not possible because line item updating has been deactivated, for example"
Where do I find this setting to activate??
Thanks
Linda

Hi, Linda,
I've just send a message to SAP on issue related with yours.
And now I've received SAP's answer as following:
As of Release 4.6, there is a new cancellation function in R/3, by meansof which the system automatically clears (among other things) the
accounting documents for the original document and the cancellation
document in FI. If the new procedure does not work, the system uses the
old cancellation as a default, automatic clearing is not carried out.
In such cases, please clear the accounting document manually.
In your cases, I think the new cancellation procedure sometimes cannot
be performed somehow.
Here are some known reasons from SD side:
1. the cancellation is an item cancellation (see note 400000).
2. the billing document has one or more items relevant for revenue
recognition (field VBRP-RRREL not blank)
3. the billing document is a down payment request
4. the field RULE_NEW_CANCEL is set to 'A' (see note 339928).
If at least one these conditions occurs, the system performs the old
cancellation procedure (in this case it does not give message VF208 as
the new cancellation procedure will not be tried at all).
Besides, the note 309208 contains a list of other possible causes from
FI/CO side.
Please check the notes for detailed information, I hope they
may help you.
Hope it may help you.

Cancel / reverse billing document cancellation document?

Is it possible to configure where we can cancel the billing document cancellation document?
Right now, if we cancel a billing doc using vf11 we get a new cancellation document generated. If we try to cancel that, the system says cancellation of this type not allowed.
Will it work if we configure to allow a cancellation document type on a cancellation billing document?
My problem is a cancellation document was created that is incorrect and can't be fixed - work order used is closed and they cannot open it back up. So this document is stuck unless I can somehow reverse or cancel it.
Thanks gurus - will promptly award pts for resolution.

Thanks for checking - the original bill did not have the same issue. It was done some time ago using the same work order number as a reference that it posted to successfully.
Since that time, that work order has been closed completely and allows no further postings to it.
For some reason, a cancellation vf11 was attempted on that original bill & it tried to post back to that original order # in the cancel. Since it had been closed, we run into this as there's no way to update that order # since it just uses the original one. So now we have a cancellation document failed in accounting due to this message and can't fix it.
A credit memo should have been done due to the order status but they did vf11 anyhow and we're left with this problem.
Thanks much gurus

After cancelling the billing document accounting document not generated

hi,
we released the billing and accounting document generated but customer needed changes in the billing values so we cancel the billing document but accounting document not generated(reversal accounting not happen)....in document flow it shows in cancel document in blocking state ....we try to release in VF02 but it throws the error "Client 200 does not contain an active application area" . but the other sales order we test in qulaity server the scenorio is working fine...............for specific one sales order creating problem now.....
try to solve the issue ..
Thanks
Muthuraman.D

Dear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella

Cancellation of billing document through VF11

Cancellation of billing document through VF11

Step 1: Creation of billing document and booking revenue
Entry Passed: Credit Revenue
                          Debit Customer
Step 2: Creation of excise invoice through J1IIN.
Entry Passed: DR Excise Duty Paid
                          CR Cenvat Payable
Step 3: Cancellation of excise Invoice through J1IIN
Entry Passed: DR Cenvat Payable
                         CR Excise Duty Paid
Step 4: Cancellation of billing document through VF11
            Debit Revenue
                  Credit Customer
DR Cenvat Payable
                    CR Excise Duty Paid
So you can see that while canceling procedure the system has passed twice
the reversal of the excise duty i.e in STEP 3 and STEP 4, and because of
this GL balances where not matching. So to counter that we passed a
Financial JV (FB50) and made the Cenvat payable account as NIL on 31st March
2009 but the same did not got reflected in report S_ALR_87012277. It still
shows me a Credit Balance in the CENVAT Payable account

We want to cancell Intercompany Billing document

Similar Messages

Maybe you are looking for