Web Applet Problem OnDemandRdrtLogin Iframe

Hi,
we have multiple Web Applets attached to one object.
The Administrator has no problem. We see all the Web Applet with the correct results.
But if we login into the system with the standard user the first time we see the following link in each web applet.
https://secure-ausomxdsa.crmondemand.com/OnDemand/user/analytics/saw.dll?OnDemandRdrtLogin
After refreshing the window it does work normal and the correct web applets are shown.
We are using iframes in the web applets.
Has someone a solution or workaround for this issue. Did not found anything about the OnDemandRdrtLogin.
Seems like the user hast o login in to the reporting the first time. I am a bit confused that it works with Admin user and with the standarduser it does not work.
Kind Regards,

Well I'm sure it must be something I'm doing, but what?
I'm able to load another jnilib using a wrapper jar with no problem. I don't have the source to this jar and jnilib so I don't know how it is being done.
I've created a simple jnilib and wrapper pair using the apple's Xcode template, but get the following error.
Here is the stack trace:
java.lang.ExceptionInInitializerError
     at CaMIDIappletTest.init(CaMIDIappletTest.java:86)
     at sun.applet.AppletPanel.run(AppletPanel.java:378)
     at jep.AppletFramePanel.run(AppletFramePanel.java:176)
     at java.lang.Thread.run(Thread.java:613)
Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.caMIDI)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     at java.security.AccessController.checkPermission(AccessController.java:427)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     at java.lang.SecurityManager.checkLink(SecurityManager.java:818)
     at java.lang.Runtime.loadLibrary0(Runtime.java:816)
     at java.lang.System.loadLibrary(System.java:992)
     at JNIWrapper.<clinit>(JNIWrapper.java:14)
So, why can my applet work with one wrapper jar and jnilib pair, and not my pair?

Similar Messages

Web applet loadlibrary problem

Hello,
According to
http://java.sun.com/sfaq/example/loadLibrary.html
A web applet should be able to load a library from a method in the classpath.
However, when I run my web applet, I get the error:
java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.caMIDI)
I'm certain the method that is loading the library is in the classpath because when I remove this jar from the classpath, I get a class not found error.
None of the jars are signed. I am using OS X 10.4.10.
Any ideas,
Thanks!

Well I'm sure it must be something I'm doing, but what?
I'm able to load another jnilib using a wrapper jar with no problem. I don't have the source to this jar and jnilib so I don't know how it is being done.
I've created a simple jnilib and wrapper pair using the apple's Xcode template, but get the following error.
Here is the stack trace:
java.lang.ExceptionInInitializerError
     at CaMIDIappletTest.init(CaMIDIappletTest.java:86)
     at sun.applet.AppletPanel.run(AppletPanel.java:378)
     at jep.AppletFramePanel.run(AppletFramePanel.java:176)
     at java.lang.Thread.run(Thread.java:613)
Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.caMIDI)
     at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     at java.security.AccessController.checkPermission(AccessController.java:427)
     at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     at java.lang.SecurityManager.checkLink(SecurityManager.java:818)
     at java.lang.Runtime.loadLibrary0(Runtime.java:816)
     at java.lang.System.loadLibrary(System.java:992)
     at JNIWrapper.<clinit>(JNIWrapper.java:14)
So, why can my applet work with one wrapper jar and jnilib pair, and not my pair?

Real Time Report Placed in iFrame and then Within a Web Applet

Real-Time Reports built and executed BI tool retrieve real-time updates. However, when report URL is placed within an IFRAME and that is then placed in a Web Applet and the Web Applet is placed within a Page Layout Section, the real-time report no longer retrieves real-time updates.
Do you have any ideas as to why?

Hi Don,
Thanks for the reply. I had downloaded a set of samples from SAP and I have looked through a few of the set you supplied. I am worried that I'm going to have some trouble because the samples have the reports loaded as part of the solution but I was looking to create a more generic viewer. I don't want to have to reprogram for each and every report that is created. That is why I was trying to use the generic parameter dialog. After the Report Load Failed dialog comes up, it does bring up the parm dialog and hits SQL Server just fine. Yes...the reports are passing Parms to Stored Procs in SQL Server. The report has default parameter values.
What I am trying to do is search thru the application folder and gather the names of the reports located there and fill the combo box with the names of the reports. Then the user should just be able to select a report and run it. I can't save the data in the reports because they must be ran per the requester's date range and other desired parameters.
Does this seem valid or am I going to have to program for EVERY single report and reprogram/recompile for every report added? Not particularly what I want to hear. I would have used the standard Crystal Report Viewer and had the users use that but it doesn't seem to allow you refresh the data from the viewer.
Thanks for your help,
Chris

Problem viewing Multiselect: "Error com.waveset.ui.web.applet.multiselect"

Hi,
I am getting this error whenever I try to show a form which has MULTISELECT fields in it.
"com.waveset.ui.web.applet.multiselect.class" not found. All other functionality is working fine.
The only thing I could make out is that there is a proxy(WEBSEAL junction) between web client and IDM server, I tried to edit BASE HREF in waveset.properties but still the problem persists. Can anyone provide solution for this problem?
-- ARK

IDM uses Java applets for the multiselect fields by default. It looks like it can't find the applet class for some reason. I'd check for the jars in the applet subdirectory where you deployed IDM. Specifically the ms6.jar file. It's possible they didn't get deployed right or that the proxy is eating them up on the way out. As an idea you might try directly accessing the jar file to see if the proxy is interfering. Something like a direct retrieval of http://example.com:8080/idm/applet/ms6.jar.
There's a way of using a javascript based multiselect field rather than the java applet. Unfortunately it involves editing each and every form that has a multiselect field in it and adding a property such as : <Property name="noApplet" value="true"/>. I really don't get why Sun decided to use a java applet when a standard HTML field works better and is more compatible with all the different browsers out there, but whatever.

Dynamically Loading Applet in an IFRAME

Hi All!
I'm not sure if this is the right place to put my question, since it's more of a JavaScript issue. But, I'll just test my luck here.
I have a signed applet that I wish to load dynamically. What I did was to create an HTML document containing the applet then have another HTML document, containing an IFRAME element with it's source pointing to the applet HTML document. This is how it looks like:
*Applet.htm (HTML containing the applet)<HTML>
<BODY>
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
          width="0"
          height="0"
          id="JavaPOSDiags"
          name="JavaPOSDiags"
          viewastext>
          <PARAM name="CODE" value="javapos.DiagApplet">
          <PARAM name="ARCHIVE" value="JavaPOSDiags.jar">
          <PARAM name="NAME" value="JavaPOSDiags">
          <PARAM name="type" value="application/x-java-applet;jpi-version=1.3.0">
          <PARAM name="scriptable" value="true">
</OBJECT>
</BODY>
</HTML>
*Main.htm (HTML containing the IFRAME that loads the applet)<HTML>
<BODY>
     <iframe id="fxJavaPOS" src="Blank.htm" width=0 height=0 frameborder=0 style="display: none"></iframe>     <!-- Blank.htm is another HTML file that contains a blank document. ->
     <script language=javascript>
          var bAppletLoaded = false;
          function loadApplet() {
               var eJavaPOSFrame = document.getElementById("fxJavaPOS");
               if(eJavaPOSFrame != null) {
                    eJavaPOSFrame.src = "Applet.htm";
                    bAppletLoaded = true;
          function testApplet() {
               if(bAppletLoaded) {
                    var eJavaPOS = document.getElementById("fxJavaPOS").contentWindow;
                    var eJavaPOSApplet = eJavaPOS.document.getElementById("JavaPOSDiags");
                    try {
                         if(eJavaPOSApplet != null) {
                              //call applet's methods/properties here...
                    } catch(exception) {
                         //an exception occured...
     </script>
     <input type=button id=loadApplet value="Load Applet" onclick="loadApplet()" name=loadApplet>
     <input type=button id=testApplet value="Test Applet" onclick="testApplet()" name=testApplet>
</BODY>
</HTML>My problem is, when testApplet() is called, an exception is thrown once the applet reference is compared to null:if(eJavaPOSApplet != null).... I don't know why this happens. When I do remove the comparison statement and just proceed w/ calling the applet's methods/properties, the browser goes crazy. It seems that the line:var eJavaPOSApplet = eJavaPOS.document.getElementById("JavaPOSDiags");gives me an object, but, I'm not sure if it is the applet, because referencing eJavaPOSApplet, e.g. calling methods or comparing to null, causes the browser to hang.
Could this be a Java security issue?
Can anyone help me?

How long does it take to load the same remote image in a browser? (clear the cache first)
What code are you using to load and wait for the image?
Have you indentified for certain that the 15s is entirely down to image loading and not anything else?

Web applet LinkedIn

Hi, I've created a Web Applet under contact related info. the web applet name is LinkedIn and it displays the content of the web page (linkedin web page). the Web Applet HTML I inserted is:
<IFRAME frameborder="0" src='http://www.linkedin.com/search?search=&keywords=%%%First_Name%%%+%%%Last_Name%%%+%%%Primary_Account_Name%%%' width="100%" height="100%> </IFRAME>
Its purpose is to grab the name and company of a contact and display it. well it does that but it shrinks the related info display width and the height. another thing that happens is that the links of the Training and Support, Admin, My Setup, Deleted Items, Help, Sign Out will not show. please advise.
Thanks David

hi alex
i am trying to filter my data and use an iframe simultaneously
these aresome of the html snippets i tried in my applet
<iframe src='https://secure-ausomxaya.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=%2fshared%2fCompany_31847_Shared_Folder%2fCall+History&Options=rfd&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Account%%%&Action=Navigate' width="800px" height="200px" frameborder="0" scrolling="auto"></iframe>
<iframe src='https://secure-ausomxaya.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=%2fshared%2fCompany_31847_Shared_Folder%2fCall+History&Options=rfd&Action=Navigate'&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Account%%% width="800px" height="200px" frameborder="0" scrolling="auto"></iframe>
<iframe src='https://secure-ausomxaya.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=%2fshared%2fCompany_31847_Shared_Folder%2fCall+History&Options=rfd&Action=Navigate&P0=1&P1=eq&P2=Account."Account Name"&P3=%%%Account%%%' width="800px" height="200px" frameborder="0" scrolling="auto"></iframe>
The data doesnt get filtered out but it filters out if i use the url section of the applet and remove the iframe which in turn leaves a big blank space under my report
Help!
Edited by: Nick Advani on Dec 11, 2008 5:01 PM

Web Applet passing account Name

I have created a Web Applet for the Account object with the type = url which links to an external web site. I pass the Account Name as part of the url string. The problem I am having is when an Account Name contains an apostrophe the link does not fire. The website vendor says the problem is with the JavaScript Siebel is using, that the apostrophe has to have an escape "\" before it. Has anyone had this problem before? We are on R15.
Thanks,
Avery

Support has reported this as bug and submitted a Change Request to development. The workaround is to use a weblink field.
Avery

Can't display a URL web applet in Double Column

I've created a URL web applet which displays in the Opportunities homepage. The problem is that the web applet do not displays in double Column, it is only displayed in single column, therefore I only see the half of the applet.
When I go to Administration/ Application Customization / Opportunities / Web Applets... and change from Single Column to Double and save, it still appears in single column. If I go back to edit the web applet it says : Single column. I don't get it, everytime I change from single to double, CRM OD does not save the changes.
Does anyone knows a solution?

hi,
i have the same problem. Did you solve it?. Please let me know...
regards,
MC

InitialContext - Applet Problem

Hi,
When i try to get InitialContext from Applet ( running from appletviewer),
i'm hitting this error. Please help me to solve this problem
Exactly this line gives the error
InitialContext ic = new InitalContext ( hEnv )
Error:
javax.naming.NoInitialContextException: Cannot Instantiate class:
weblogic.jndi.WLInitialContextFactory
-regards
Abdul Malik

you can use applet to pull data periodically from the servlet.
mj
"Anthony A." wrote:
What if you want to perform some type of 'realtime' push from the server?
Anthony
"minjiang" <[email protected]> wrote in message
news:[email protected]...
why do you have to call your ejbs in applet directly? Why not use aservlet in
between?
The overhead of downloading so many so big jar files to the client machinewill
kill/time out any broswer http session.
mj
Abdul Malik wrote:
Dear Friends,
After 5 days of struggle, somehow i was managed to access the EJB from
Applet. But very slow coz of Big Jar files ( can make it bit small by
identitfying required classes ). I dont know this is correct approach
or
not, but works ( damn slow )
What i did was
1) Installed the Latest Plugin 1.3.1
2) Downloaded HTMLConverter tool from java.sun.com and converted my
html file to use plugin.
3) inlcuded few jar files in archive tag.
The files i added in archive tag is
1) myapplet.jar ( applet classes )
2) weblogicaux.jar ( !!!!!!!!!!!! quite big jar file )
3) weblogicclass.jar ( jarred all the classes from classes\weblogicfolder
(!!!!!!!!!! so big jar file !!!!!! )
4) myejb.jar ( suppose to work with home and remote class, but notworking
( looking for container generated files). so i added my EJB.jar file.dont
know why ?????????? )
then it works.
well, i am not happy with this kind of approach. if any body haveefficient
one, please kindly post it.
Note: i tried in 1.2.2 plugin ( works )
Environment: Windows 2000 / Windows 98, Weblogic 5.1 Service pack 7
-regards
Abdul Malik
"Daniel Hoppe" <[email protected]> wrote in message
news:[email protected]...
Anthony,
why should he place j2ee.jar in the applet classpath? Shouldn't be there
actually. Your problem seems to be related to a class which is not
serializable.
Daniel
-----Ursprüngliche Nachricht-----
Von: Anthony A. [mailto:[email protected]]
Bereitgestellt: Freitag, 22. Juni 2001 18:10
Bereitgestellt in: jndi
Unterhaltung: InitialContext - Applet Problem
Betreff: Re: InitialContext - Applet Problem
As a test, try to place the j2ee.jar and weblogic.jar in your
<archive tag>.
I have this code in my applet's init() method and it fails
due to a JMS
Exception.
I'm using BEA's web server, jndi server, and app server on
the same box as
the client.
Thanks,
Anthony
code:
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL, "t3://anthony01:7001");
System.out.println("creating context");
InitialContext ctx = new InitialContext(ht);
error:
JMSException: weblogic.jms.common.JMSException:
java.rmi.MarshalException:
failed to marshal public abstract weblogic.jms.client.JMSConnection
weblogic.jms.frontend.FEConnectionFactoryRemote.createConnecti
on(weblogic.rj
vm.JVMID,weblogic.jms.client.JMSCallbackRemote) throws
javax.jms.JMSException,java.rmi.RemoteException; nested exception is:
java.io.NotSerializableException: weblogic.jms.client.JMSCallback

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to;<BR><BR>about:home (Firefox default home page),<BR>
about:newtab (shows the sites most visited),<BR>
about:blank (a blank page),<BR>
or you can enter any web page you want.<BR><BR>
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

How can I open a saved report in WEBI applet

Hello -
We have successfully integrated the BO WEBI applet into our web application, and have created reports using the "Save As" option. However, we don't seem to have access to these reports. There does not seem to be an "Open File" or "Open Report" icon in the applet toolbar that we can use to access the reports that we have created and saved. Is this capability not available in the WEBI? There also doesn't seem to be an easy-to-find explanation of what we are doing wrong.
Thank you for any help.

Ted -
Thanks for your response. We tried what you suggested, and it does indeed work for the first document you load.
However, now I see the effects of not having an Open icon in the applet's toolbar. So we have a "list widget" in our app from which the user can select a report to load into the applet for viewing or editing. The way it works, as you suggested, is to provide the doc id and name thru the applet parameters. So after selecting a document, we rerender (via ajax) the panel that contains the applet, which, of course, causes the applet to completely reload - which is very ugly, clunky, and something that seems unnecessary. (We actually get an error when we try to select another report, telling us that we need to close down the applet and log in again, but this error is beside the point for now.)
The first sentence of your initial reply was to say that there is no Open method. By this, were you also implying that there is no java method call in the applet I can make via javascript on the page? I would really like to be able to load a new document into the applet without having to suffer thru a reload. Is there any java api exposed for the applet that I can possibly use to load a new document "on the fly"? I haven't been able to
Thanks again for any help.

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Web Applet Report that creates email for Opportunity Details

Hi,
I'm trying to create a report that creates an opportunity detail report. My Web applet works. The only issue is the HTML tags show up in the email, instead of formatting the narrative fields.
Any input is appreciated.
Regards,
Jo Ann

Were you able to at least insert column values into the email (subject line, body)? I've got this to work in the Custom Text Format field of a user's email column:
@[html]<**a href="mailto:"@"?subject=Good%20Morning">@<**/a>
(Ignore the asterisks)
It does popup a blank email with the user's email in the To: line but what I want to do is pull in other column values from the record into the subject line and body of the email. How do I do that?
Edited by: user729346 on Apr 11, 2011 8:53 AM
Edited by: user729346 on Apr 11, 2011 8:54 AM
Edited by: user729346 on Apr 11, 2011 8:55 AM

Global Web Applets and My Custom Home Page Report

Hello,
I setup a custom "My Home Page Report" which is great but does not display the report when you load the home page without clicking the "Generating analysis... Click here to view the results" link. Is there a way around this?
I then setup a a Global Web Applet and embedded this on the main home page. When doing this I found you cannot have 1 section that spans the entire width of the page as you can with a report (To my knowledge?). I then tried putting two Custom Web Applets side by side to display the graph and report I wanted. This works however, I have vertical scroll bars although the reports are perfectly displayed and do not require any scrolling. Is there a way to get rid of the scroll bars?
Regards
Innoveer

Innoveer, you can contact customer care and ask them to provision your On Demand application with the custom homepage "Execute Report Immediately" option. However, you want to make sure that this custom report loads quickly - if not it will delay the loading of your homepage.

Web Applet Problem OnDemandRdrtLogin Iframe

Similar Messages

Maybe you are looking for