Web Cache Connection Error

Hi All,
I had installed Application Server 10g on one Window 2000 Server machine. It was working fine. But as all the components of Application Server were installed on one machine thats why its performance was bad.
So i decided to move the Oracle AS Portal to another machine. I installed only oracle portal and its required subcomponets on another machine. The new instance used the old server's metadata and other services.
The Portal Now works fine but there are certain issues.
First is that when i deploy an application on the new portal home and when try to register it, it gives me following error:
=============================================================
Internal error (WWC-00006)
The provider URL specified may be wrong or the provider is not running. (WWC-43176)
=============================================================
The Provider URL is also correct and the the provider is also running. as when i open the URL in browser it gives me success page.
The Second Error is of Web Cache. and i think it could be the cause of the first error as well.
When i go to the global Setting of the Portal/Administer, and then to Cache Tab and check Clear The Entire Web Cache and press apply i get the following error.
=============================================================
Could not open web cache connection. (WWC-40019)
=============================================================
I checked everything and everything seams to be fine. Remember that now the WebCache is pointing to the new server webcache services.
I need help in removal of these problems.
Regards
Osama Hashmi

Hi Osama,
See my reply in the Install forum:
Just checking, have you reviewed the OracleAS Portal Error Messages Guide for the error message "WWC-40019: Could not open web cache connection?"
This guide can be found on OTN at http://www.oracle.com/technology/documentation/appserver1012.html and it t describes this error and what can be done to solve it in detail.

Similar Messages

(WWC-40019) web cache connection error

Dear All,
I installed Oracle9iAS Release 2 Portal & Wireless installation type on my PC and the Oracle Infrastructure on another PC. When i tried to follow the described steps to shutdown my Oracle9iAS instance and then the Infrastructure instance to increace the RAM size of the Infrastructre machine and when i tried to startup the infrastructure and then my portal instance. I faced with the problem that my portal instance can't connect to the web cache and got the following error message :
Error: Could not open web cache connection. The portal use-web-cache setting is set to ON while web cache
may be down. (WWC-40019)
Any help will be appreciated.
Regards,
Mohammed Amin
[email protected]

This error could happen because of various causes. These are mentioned in the Config Guide.
Oracle9iAS Portal Configuration Guide Release 2 (9.0.2)
8.1 Oracle9iAS Web Cache related issues
Error: Could not open web cache connection. The portal use-web-cache setting is set to "on" while web cache may be down. (WWC-40019)
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgtroub.htm#1015385
Most often the reason is that of wrong Web Cache related config. info.in the Portal.
The following doc on scripts might help you address the config. issue
B.2 Oracle9iAS Web Cache configuration scripts
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgscript.htm#639250
If your problem is still not sovled you might want to read the following sections
6.4 Configuring Load Balancing Routers
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgmidfw.htm#1006335
6.8 Configuring Oracle9iAS Portal to Work with Oracle9iAS Web Cache
http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgmidfw.htm#1009317
Hope this helps.
- Senthil

Need help resolving Web Cache upgrading error

I successfully installed 10g AS on top of my 9i AS (9.0.3) on a different Oracle home. Then I proceeded to run the Upgrade Assistant (iasua.bat). Everything went well except the upgrade of Web Cache failed. I'm only installing/upgradeing the J2EE and Web Cache. Any help would be greatly appreciated.
I'm running on XP SP2.
the following are the lines in iasua.log related to the error:
2007/04/04 21:10:22.890 GMT NOTIFICATION:1 Framework: Starting to upgrade WebCache.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Invalid element 'MULTIVERSIONHEADERSRULE' in content of 'CACHEABILITYRULE', expected elements '[SELECTORS]'.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Unable to upgrade file C:\Oracle\ora9ias\webcache\webcache.xml
2007/04/04 21:10:23.515 GMT NOTIFICATION:1 Framework: Finished upgrading WebCache with status: Failure.

What that means is Silverlight can't find a required component.
When I clicked on the site, it loaded pretty slow but I got to see the login screen without error.
Either the expected dll is cached on my machine or you have an intermittent problem.
As I'm a some-time Silverlight developer I could well have necessary dll if they are standard components.
As an outside chance...
You could try clearing your cache in case it's a versioning issue.
Failing that, I suppose you could maybe install the Silverlight and blend sdk.
One thing you could easy try.
Does Silverlight work for you generally?
Follow the link on this page:
http://social.technet.microsoft.com/wiki/contents/articles/30387.silverlight-trouble-shooting-installs.aspx
If that errors then it's the install on your machine.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

BODS SOAP Web Service Connection error RUN-248005

Hi Experts,
I need help connecting SOAP web service to BODS. We have configured the initial set up by importing the functions from the WSDL that was provided to us. The WSDL provided us with a request and reply schema as follows:
We then created the data service job that would consume the function call. An overview of the dataflow is as follows:
When we run the job with null values for the source table the job returns no errors, but returns no data either into the destination table (Which we think is to be expected because we have no parameters to search on). If we add a value to the source table that is a required field for WSDL GET function (sys_ID) the job runs, but produces the error shown below:
We configured the data flow by using a reference document that can be found at this link: http://www.dwbiconcepts.com/etl/23-etl-bods/158-web-service-call-in-sap-data-services.html.
Any help in regards to why we are getting a “No response to web service error” would be much appreciated! Also, if further detail is needed please feel free to ask.

Yes we did make progress. Follow the steps listed below.
Pre-Configuration
A WSDL for BODS can be provided from your vendor (Amazon or Twitter) or created in-house. In my tutorial I will be using ServiceNow. ServiceNow is a platform-as-a-service (PaaS) provider of IT service management (ITSM) software.
The WSDL provided should look like this:
           https://<instance>.service-now.com/incident.do?WSDL
To verify that the WSDL works you can open it in a browser to see the xml schema. Since the WSDL is HTTPS the browser will prompt you to enter credentials in order to view it. The username and password will need to be provided to you from vendor you are trying to connect to.
BODS requires that any web service connection that is https to have a certificate saved to its internal configuration on the job server where the application resides. The certificate is referenced when the call goes out to verify authentication.
You can get the server certificate from the vendor who is providing the web service or you can also download the certificate from the browser and save it in base64 binary encoded format to a file and use that. In my example I will be using Firefox to export.
if you have fire fox, then on the left side before the URL Address bar there will be a lock icon, click on view certificate, select the details tab, select the *.service- now.com and click on export, in the dialog box, select the Save as type X.509 Certificate (PEM), you can save this with any name on your machine.
Now go to the JobServer machine, go to %LINK_DIR%\ext\ folder, open axis2.xml in notepad,
since it's https uncomment the following tag (transportReceiver)

it should look line something below
<transportReceiver name="https" class="axis2_http_receiver">
<parameter name="port" locked="false">6060</parameter>
<parameter name="exposeHeaders" locked="true">false</parameter>
</transportReceiver>
uncomment the following tag (transportSender) and comment out the parameter KEY_FILE and SSL_PASSPHRASE, enter the complete location of the certificate that you saved from the browser in the SERVER_CERT parameter. you can save the certificate also in this folder

this should look like
<transportSender name="https" class="axis2_http_sender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="xml-declaration" insert="false"/>
</transportSender>
<parameter name="SERVER_CERT">enter the certificate path</parameter>


save this file and open this file is browser to make sure that the XML is valid
****How to set up multiple axis files****
Creating a Datastore
Select Project -> New- > Datastore
          Datastore name: Applicable Name
          Datastore Type: Web Service
          Web Service URL: https://<instance>.service-now.com/incident_list.do?WSDL
          Advance <<
          User name: *****
          Password: ******
          Axis2/c config file path: \Program Files (x86)\Business Objects\BusinessObjects Data           Services\ext\Service_now

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

SAP Web AS connection Error

Hello Guru's,
we have a problem to connect our ERP (saperp) with EP (sapep).
Following is show by the coneectiontest:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (saperp.domain.com:8000)
5. The host name saperp.domaint.com was resolved successfully.
6. The server saperp.domain.com was pinged successfully.
7. The Web AS ping service http://saperp.domain.com:8000/sap/bc/ping was pinged successfully.
8. An HTTP/S connection to http://saperp.domain.com:8000sap/bc/bsp/sap was not obtained successfully; this might be due to a closed port on the Firewall.
Test Connection with Connector works fine.
Checks:
-Connectiontest to saperp port 8000 with telnet works fine.
-Service test of "http://saperp.domain.com:8000/sap/bc/ping" with browser works fine. ("Server reached successfully")
-SSO works fine
-All services for BSP are activated.
-No Firewall are present between the Systems
-ICMP are possible
-Can't find some entry's in J2ee Log's
-Sec. Audit prot. are no entry's
i have no more ideas, can someone help?!
regards
Chris

Hi,
Don't worry : these test results are meaningless. You should test a real BSP application and see if it works.
Regards,
Pierre

Web Cache Config Error

Hi Guys
How can i configure two or more web server with single Web Cache.
I mean I have foure sites hosts on my firstserver.edu and five sites are host
on secondserver.edu. My web cache name is Cacheserver.edu.
I want that cache server cache pages and every thing that access through cache server. It works well for one web server but not work for more than one.
All these three machines installed.
What is config for my request. Pls mail me .
I m waiting
OCP DBA
[email protected]

In the Web Cache Manager UI:
- first define your 9 sites (site definition)
- then define your 2 origin servers (application web servers)
- then map each site to the appropriate origin server (site to server mapping)
Be sure to apply changes and restart the cache when you're done.
As suggested earlier, see the Web Cache Administration and Deployment Guide (available on OTN) for detailed instructions.

HTTPS web service connection errors

We have a Java web application that accesses a Web Service using https. Last week the hosts of the web service installed a new signed SSL certificate. As soon as they installed the new certificate, our Java web app stopped working. When we try and access the web service via the web app we get the following error:
2008-05-16 20:20:07,226 ERROR [org.codehaus.xfire.transport.http.HttpChannel] - javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
2008-05-16 20:20:07,237 ERROR [grantee.GranteeServlet] - Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Couldn't send message.
The Operating System is Solaris, The Web application server is Tomcat 5.5, and the JDK java version is "1.5.0_05".
The confusing part is that we can test the web service using SOAP UI. We can access the webservice that way. So the web service seems to be working correctly, but our Web Application can't seem to connect to it.
Any ideas?
Thanks in advance, and let me know if you have any more questions.

Hi Aaron,
You may want to try formatting the cell of "ModifiedOn" to a TEXT format instead of date to get yyyy/mm/dd formatting to appear.
It seems that Xcelsius automatically converts any type of date-specific formatting (as specified from Excel) to a date serial, which is what you are seeing here.
Hope that works.

Web Forms Connection Error

Hi Folks,
I need help in deciphering this error message. I am trying to
connect via the browser to a simple form in Developer SErver and
I get this error in the Applet Window:
FRM-99999: An unexpected error occurred.
Details...
Java Exception:
sun.applet.AppletSecurityException: Checkconnect.networkhost1
at sun.applet.AppletSecurity.checkConnect
(AppletSecurity.java:599)
at sun.applet.AppletSecurity.checkConnect
(AppletSecurity.java:641)
at sun.applet.AppletSecurity.checkConnect(Compiled Code)
at java.net.InetAddress.getAllByName0(Compiled Code)
at java.net.InetAddress.getByName0(Compiled Code)
at java.net.Socket<init>(Socket.java:89)
at oracle.forms.net.SocketConnection.connect
(SocketConnection.java)
at oracle.forms.engine.Runform.initConnection(Runform.java)
at oracle.forms.engine.Runform.startConnection(Runform.java)
at oracle.forms.engine.Main.createRunform(Main.java)
at oracle.forms.engine.Main.startImpl(Main.java)
at oracle.forms.engine.Main.start(Compiled Code)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
I have tries the following so far:
1) changed to HTTP mode in the ifsrv60 service
2) changed from the default port 9000 to 9999
Although the errors are slightly different in each, they are
also sufficiently similar.
Many thanks,
Ara Jeknavorian
Genesis Consultants Inc.
[email protected]
null

Thanks for the reply; however, I was using IE 5 when this
problem occured and am still using IE 5. I think my problem may
be one of configuration. Presently, I have the OAS on a linux
maching and the Developer Server on an NT box. I am using the
parameter "serverHost" in the ActiveX control. I have tried
using the UNC format and it responded with an error so I
revereted back to the explicit the host name (HOSTS file is
correct).
Since the original problem, ifsrv60 has caused NT to die. Now
I have to reinstall the OS. Luckily I had a dual-boot with
Win98 or else I would have lost much more than the OS.
Ara
harjeet singh bakshi (guest) wrote:
: hello,
: this problem will not come using IE 5.0 browser, if everything
: else is configured properly.just try it out
: harjeet
null

Web server connection error

I have had my printer for about 8 months. (I use eprint from my tablet). It has worked fine until last week. I am now geting a server connetion error, unable to connect to server. I have unplugged the router, modem and printer. Then plugged them back in one at a time. It is connected to a wireless internet.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank. <<< The DNS could be your problem. If this does not work, try Google's DNS 8.8.8.8
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Web Cache Error

We are occassionally getting the following error in various scenarios -- in development or just browsing the site:
"Oracle Web Cache Network Error"
Oracle Web Cache encountered a network error when communicating with the application web server.
We have Web Cache installed on the same server as the portal application, but an Oracle consultant who was in a few weeks ago said we had more than enough capacity. Any ideas? We're on Oracle Portal Version: 3.0.9.8.2 and

The error you are seeing is usually the result of a slow response from your origin server, although it could be something else. If you provide
a snippet of your Web Cache event log (verbose), I'll be able to assist you better.
For now, let's assume it is due to a slow origin server response. On a cache miss, if the Web Cache doesn't receive a response
from the origin server within a given time interval, it will close the connection with the origin server and respond to the browser with
a network apology page. This is the page you are seeing. There are ways to correct this.
First of all, you should modify the network apology page in order to customize it for your application or web site. The file is located in the $ORACLE_HOME/webcache/docs directory.
If you're using Web Cache 9.0.2.x, the default origin server timeout is 3600 seconds. You probably won't have to change this, but if you want to, then
please refer to the "Oracle9iAS Web Cache v9.0.2.0 Administration and Deployment Guide", available on OTN.
The relevant section is" Chapter 6, Task 7: Configure Network Timeouts."
If you're running Web Cache 2.0.0.x, the default origin server response timeout is 30 seconds. This default was chosen because we felt
that no application should take more than 30 seconds to respond to a user's request. Since then, we've learned that a lot of apps out there,
especially business intelligence apps, have complex queries that take several minutes, if not hours, to complete. To change this default timeout, you need to modify your internal.xml
file. Here's a snippet from the 2.0.0.4 readme.html file describing how to do this:
3.0 Network Apology Pages
When Oracle Web Cache sends requests to an application Web server, Oracle Web Cache permits the application Web server 30 seconds in which to
generate a response for the browser. If the application is unable to generate a response within that time, Oracle Web Cache sends a network apology
page to the browser.
If 30 seconds is not sufficient, then you can change the default settings of the OSSEND_TIMEOUT and OSRECV_TIMEOUT attributes in the
internal.xml file:
OSSEND_TIMEOUT: Network round-trip time (latency) between Oracle Web Cache and the application Web server. The 20 second default of
the OSSEND_TIMEOUT attribute is usually sufficient for most operating systems.
You can determine the latency to the application Web server by issuing the the following command from the Oracle Web Cache computer:
ping -s application_Web_server
This command provides output similar to the following:
PING sales.us.acme.com: 56 data bytes
64 bytes from sales.us.acme.com (130.35.45.34): icmp_seq=0. time=20. ms
64 bytes from sales.us.acme.com (130.35.45.34): icmp_seq=0. time=21. ms
If the time value is over 20 seconds, then increase the OSSEND_TIMEOUT attribute value.
OSRECV_TIMEOUT: Latency and application Web server processing time. The default is 30 seconds.
You can determine the processing time by sending a sample request to the application Web server and monitoring the time to process the
request. If the processing time is over 30 seconds, then increase the OSRECV_TIMEOUT attribute value.
To change these default settings:
1.Locate the following line in the internal.xml file:
<CALYPSONETINFO/>
2.Modify the <CALYPSONETINFO/> line as follows:
Add the OSSEND_TIMEOUT attribute as follows:
<CALYPSONETINFO OSSEND_TIMEOUT="seconds"/>
Add the OSSRECV_TIMEOUT attribute as follows:
<CALYPSONETINFO OSSRECV_TIMEOUT="seconds"/>
Add both the OSSEND_TIMEOUT and OSSRECV_TIMEOUT attributes as follows:
<CALYPSONETINFO OSSEND_TIMEOUT="time" OSRECV_TIMEOUT="time"/>

Error: Web Cache

We are occassionally getting the following error in various scenarios -- in development or just browsing the site:
"Oracle Web Cache Network Error"
Oracle Web Cache encountered a network error when communicating with the application web server.
We have Web Cache installed on the same server as the portal application, but an Oracle consultant who was in a few weeks ago said we had more than enough capacity. Any ideas? We're on Oracle Portal Version: 3.0.9.8.2

Delete the temp files.
Sunder (An Oracle & E-Commerce DBA Consultant)

IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
Lokesh

Hello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful.

Update Portal with new Web Cache location

Hi!
We are trying to move our front-end WebCache to a new server. The Web Cache seems to work allright, but I can't get Portal to access the Web Cache.
After moving the Web Cache I've updated the Portal Web Cache Settings in IAS console's portal:portal instance. OC4J_Portal and portal:portal are running and are not showing any errors in IAS console. When I try to access Web Cache through Portal administrative page i get an error saying WWC-40019 "Could not open web cache connection". The URL Portal uses to access Web Cache admin page i.e. is wrong.
I need some help finding the appropriate way to configure Portal with the new Web cache addresses.
Thank you!
Best regards
"Heyers"

Portal PM, I thought you said that this solution would not work. Everyone I have heard so far has said that you cannot configure webcache to work with Portal documents. Does this work or does it not?
Read the messages below from the bottom up.
It's not possible to do that today.
In 9.0.2 (the next release) we will be using WebCache configured out of the box so you won;t need to, however, till then you cannot use webcache with Portal 3.0.x
Thanks
Portal PM
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Agus Jaelani Type : Question
Date : Feb 4, 2002 23:11 PT
please try using this configuration on http.conf
Port <webcache port>
Listen <apache listen port>
ServerName <webcache hostname>
you must running ssodatan script again.
Note :
this config only make portal work together with webcache.
Title : re:Oracle Portal with Oracle Web Cache O/S : N/A POST: REPLY (W/QUOTE)
Author : Krzysztof Jungowski Type : Question
Date : Feb 5, 2002 06:58 PT
Thanks a lot. It works.
best regards
Krzysztof Jungowski

WebCache connection error (WWC-40019)

Dear All,
I installed Oracle9iAS Release 2 Portal & Wireless installation type on my PC and the Oracle Infrastructure on another PC. When i tried to follow the described steps to shutdown my Oracle9iAS instance and then the Infrastructure instance to increace the RAM size of the Infrastructre machine and when i tried to startup the infrastructure and then my portal instance. I faced with the problem that my portal instance can't connect to the web cache and got the following error message :
Error: Could not open web cache connection. The portal use-web-cache setting is set to ON while web cache
may be down. (WWC-40019)
Any help will be appreciated.
Regards,
Mohammed Amin
[email protected]

Hi,
The Oracle Portal Center can best address this issue.
Also, check out this similar thread:
re:Webcache error

Web Cache Connection Error

Similar Messages

Maybe you are looking for