Web Client URL in FDM
Hi All,
can any one provide Web Client URL in FDM version 9.
Thanks in advance.
Hi,
Please try the following URL
http://<Servername>/HyperionFDM/AuthorizedPages/LogonPage.aspx
Regards,
tvmk
Similar Messages
-
Accessing new application using direct Hyperion Planning web client URL
I added new Hyperion Planning application. From standard workspace URL [http://demodrive:19000/workspace/index.jsp], I can now access new application.
However, when I use the direct Hyperion Planning web client URL [http://demodrive:8300/HyperionPlanning/LogOn.jsp], new application is not included as one of available applications to select. What am I missing?Hi,
I find it a little strange that you can see the planning application through workspace but not directly, I would usually expect problems the other way round.
One thing to check for if that you don't have multiple planning instances, check in the configuration utility, you could have an instance pointing to one set of apps and another instance pointing to a different set of apps.
Though saying this I would expect workspace to show the same apps as going directly.
Cheers
John
http://john-goodwin.blogspot.com/ -
Urgent: FDM Web Client not opening up properly after complete configuration
Hi,
I have installed FDQM 11.1.2 on a seperate server from foundation server, whole installation and
configuration process is successful. I am able to create application from workbench client and also able to
connect to an Essbase application. But when i try to access web client through url: http://localhost/HyperionFDM
the web page that opens is not not proper, and i am also not able to login from web client.
i have installed IIS 6.0 on both servers. please suggest me some ways to solve this problem.
Any help is highly appreciated.
Regards,
Arvind
Edited by: Arvind on Mar 8, 2011 8:33 PMLarry,
Of course there are instances of mistakes. What I was trying to communicate to the poster is that I am 100% certain that 2008 R2 is not supported. I've seen this mistake made at least once. The resolution is to redeploy FDM on a supported platform. That is the answer. If you call support, you will get the same answer. Wayne knows this because he used to work for support before joining our team.
If we seem inflexible on this point it is because we have taken the time to provide the answer and it seemingly is not an answer that the poster "likes" and continues to belabor the point.
Our intent is to help this issue get resolved sooner rather than later. By searching for a non supported work around, the poster is going to waste seemingly valuable time.
Hopefully that helps you appreciate our perspective.
Tony -
Converter Web Client: get compiler error when run URL
When I try to run the Converter's web client with the the URL:
http://localhost:8000/converter
I got a compiler error on the lines:
import Converter;
import ConverterHome;
The J2EE server wants to have a "." after the Converter and ConverterHome.
Any one has any idea?
The error messages are:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
C:\app\j2sdkee1.4\web\repository\Standard-Engine\localhost\converter\index_jsp.java:7: '.' expected
import Converter;
^
C:\app\j2sdkee1.4\web\repository\Standard-Engine\localhost\converter\index_jsp.java:8: '.' expected
import ConverterHome;
^
C:\app\j2sdkee1.4\web\repository\Standard-Engine\localhost\converter\index_jsp.java:20: cannot resolve symbol
symbol : class Converter
location: class org.apache.jsp.index_jsp
private Converter converter = null;
^
C:\app\j2sdkee1.4\web\repository\Standard-Engine\localhost\converter\index_jsp.java:26: cannot resolve symbol
symbol : class ConverterHome
location: class org.apache.jsp.index_jsp
ConverterHome home = (ConverterHome)PortableRemoteObject.narrow(objRef, ConverterHome.class);
^
C:\app\j2sdkee1.4\web\repository\Standard-Engine\localhost\converter\index_jsp.java:26: cannot resolve symbol
symbol : class ConverterHome
location: class org.apache.jsp.index_jsp
ConverterHome home = (ConverterHome)PortableRemoteObject.narrow(objRef, ConverterHome.class);
^
C:\app\j2sdkee1.4\web\repository\Standard-Engine\localhost\converter\index_jsp.java:26: cannot resolve symbol
symbol : class ConverterHome
location: class org.apache.jsp.index_jsp
ConverterHome home = (ConverterHome)PortableRemoteObject.narrow(objRef, ConverterHome.class);
^
6 errors
at org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:125)
at org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:293)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:387)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:410)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:570)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:289)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.util.SecurityUtil$1.run(SecurityUtil.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:499)
at org.apache.catalina.util.SecurityUtil.execute(SecurityUtil.java:210)
at org.apache.catalina.util.SecurityUtil.doAsPrivilege(SecurityUtil.java:147)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:274)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:99)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:177)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:271)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:133)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.authenticator.SingleSignOn.invoke(SingleSignOn.java:383)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:469)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:223)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:405)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:380)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:508)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:533)
at java.lang.Thread.run(Thread.java:536)
Apache Tomcat/5.0I have exactly the same error.
Me too, I'm running on Win XP. And I have had lots of trouble to deploy the converter.
I cannot install J2EE 1.3 as I am supposed to write a report on how Web Services may help my company. By the moment I can only say it takes me much more time than expected to run the J2EE 1.3 tutorial. As SUN didn't deliver a tutorial one can use.
So by the moment if anyone can HELP me to finish this converter tutorial I will be thankful.
Bye
Manuel Acevedo -
Nothing listed under Analysis | Reports in FDM Web Client
When navigating to Analysis | Reports in the FDM web client, we do not have anything listed on the page. We just have a blank white panel, with an "English Groups" (unpopulated) and a format drop-down list, and a "Publish" button. We have run numerous loads using both the FDM web client as well as batch processes using upsShell.exe and FDM Workbench, so there should be plenty of information available here.
It appears that this is not working properly. Could this be due to the ordering of system environment variables again? (We do not see any errors incidentally)Browse to Oracle\Middleware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents. In this folder you should fine the Reports.zip file. Extract this to extract two XML files that are the reports. One is for Oracle and one is for SQL Server. Import the XML via the workbench (File > Import) for the corresponding relational database type that the FDM application is on.
-
URL to run Zimbra Web Client for Oracle Beehive?
I installed Oracle Beehive Integration for Zimbra Release 1.
How to run the Zimbra Web Interface? .
Where is the Zimbra Web Client Interface?
Is neccessary to download a Zimbra Web Client Interface from the www.zimbra.com site?Hello
No need to download the Zimbra web interface from Zimbra.com
Run Beehive runInstaller on a new Oracle Home (dedicated for your Zimbra installation ) and choose the latest option at the starting page - Zimbra Installation for Beehive
Zimbra is an OC4J application, running on your HTTP port ( 7777 or 7778 by default)
The URL to access Zimbra once installed is http://yourservername.domainname:port/zimbra
HTH
Fred -
I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message:
The website "mail.ad.msu.edu" requires a client certificate.
This website requires a certificate to validate your identity. Select the certificate to use when you connect to this website, then click Continue.
The choice I am presented with is: adp3d (iChat Encryption Certificate) (Apple.Mac Certificate Authority)
I'm thinking that this can't be correct, and in fact doesn't allow me to signing to the website.
How do I go about getting the proper certificate?I'm attempting to access my work email through Microsoft Outlook web client. The URL is mail.ad.msu.edu. I get the following message:
The website "mail.ad.msu.edu" requires a client certificate.
This website requires a certificate to validate your identity. Select the certificate to use when you connect to this website, then click Continue.
The choice I am presented with is: adp3d (iChat Encryption Certificate) (Apple.Mac Certificate Authority)
I'm thinking that this can't be correct, and in fact doesn't allow me to signing to the website.
How do I go about getting the proper certificate? -
FR cannot run inthe web client
hi,
I have installed and configured HFM, FDM, and Financial Report in win2008 server , appache 2.0.59 and sql server 2008...
i successfully run the workspace and sharedservices in web client to go on below url
workspace:- http://localhost:19000/workspace
Shared services:- http://localhost:28080/interop
but when i am using run the FR in web client .. am getting the error ..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
below the url for financial report
http://localhost:8200/hr
i checked the EPM diagonicts every things is passed
please help me out this issues
thanksGiven that this seems like a recent upgrade, was this working before the upgrade to 11.1.1.4?
I would check that the Print Server was reconfigured after the upgrade and that the correct version of ghostscript* is used, as well as making sure adobe is installed on the FR server and client machines.
*You can check out the requirements here: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
** Also make sure the correct ghostscript version matches the os version - x86 or x64. -
Not able to access the Oracle I/PM web client.
I have started the Administration server and the Oracle I/PM Managed Server. Now I'm trying to access the Oracle I/PM web client at this URL: http://hostname:16000/imaging. But when I hit this URL, the following error comes up:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I'm also posting a part of the logs from the IPM_server log file:
####<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <01hw311161> <IPM_server1> <main> <<WLS Kernel>> <> <> <1369026172860> <BEA-000360> <Server started in RUNNING mode>
####<May 20, 2013 10:32:53 AM IST> <Info> <J2EE> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1369026173516> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173641> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173750> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173766> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:33:51 AM IST> <Info> <Health> <01hw311161> <IPM_server1> <weblogic.GCMonitor> <<anonymous>> <> <> <1369026231604> <BEA-310002> <85% of the total memory in the server is free>
What configuration am I missing?
Thanks in advance
PradeepHi Srinath,
I have checked that as well, it is showing the IPM_server in running mode.
Also it doesn't show any deployment failure in the command line. Here is what it shows:
<May 20, 2013 10:32:51 AM IST> <Notice> <WebLogicServer> <BEA-000332> <Started W
ebLogic Managed Server "IPM_server1" for domain "base_domain123" running in Deve
lopment Mode>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RUNNING>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server st
arted in RUNNING mode>
I feel there is some issue as this log is suggesting:
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
But I don't know how to resolve it.
Thanks
Pradeep -
Spaces disappear from folder name when opened thrugh Web Client
Hi,
I am opening a pdf or word document through method EXECUTE of class CL_GUI_FRONTEND_SERVICES.
Now if there are more than one space in the path (ex. D:tes t.pdf ) then file gets opened sucessfully if I log in through WIN client in SAP.
But if i log in through SAP WEB client ,then only one space is retained in the URL and rest of the spaces are removed by method and I get a message "Path D:\tes t.pdf" not found.
Any suggestions welcome?
Regards,
Mukul Sharma.Delete localstore.rdf or rename the file to localstore.rdf.sav in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] to test if the file is corrupted.
See http://kb.mozillazine.org/Corrupt_localstore.rdf
(caution: do not delete the localstore.rdf file in the Firefox program installation folder)
Note:
Deleting the file [http://kb.mozillazine.org/localstore.rdf localstore.rdf] will reset the customizations of the toolbars to the defaults.
You can rename "localstore.rdf" to "localstore.rdf.sav" to test if that solves it.
Then you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if it didn't work. -
Error while creating return order(Complaint) in IC web client
Hi SAP Experts,
I am getting following Error while creating return order(Complaint) in IC web client.
Error when processing your request
What has happened?
The URL http://sapcrd.comfort.com:8000/sap/bc/bsp/sap/crm_ic/default_delta.do was not called due to an error.
Note
The following error text was processed in the system CRD : Exception condition "NON_EXISTING_HANDLE" raised.
The error occurred on the application server sapcrd_CRD_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: PRC_PD_HEAD_ADD_COND of program SAPLPRC_PRICING_API
Function: CRM_PRIDOC_UPDATE_EC of program SAPLCRM_PRIDOC_COM_EC
Form: EXECUTE_CALLBACKS_PLANNED of program SAPLCRM_EVENT_OW
Function: CRM_EVENT_SET_EXETIME_OW of program SAPLCRM_EVENT_OW
Function: CRM_ORDER_COMPLETE_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_MULTI_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN of program SAPLCRM_ORDER_API
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
Method: IF_EX_ORDER_SAVE~PREPARE of program CL_EX_ORDER_SAVE==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CRD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcrd_CRD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server sapcrd_CRD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 330 -u: VORUSX -l: E -s: CRD -i: sapcrd_CRD_00 -w: 2 -d: 20080324 -t: 021723 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Maximum points will be awarded for useful information.
Thanks,
RonyHi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady. -
Invoking a SyncAsync Process from a Web Client
I implemented a SyncAsync pattern as documented on the BEA website which allowed me to invoke an async process from a stateless process.
This works as a syncasync wsdl gets generated and is used by the stateless invoker process to form a web service control to invoke the async process.
What i would like to do now is call the async process via its syncasync wsdl from a web client. Does anyone know how to create a web service client from the syncasync wsdl which I can use from a web client ?Hello,
Here is the code I use:
Properties props = new Properties();
Locator locator = null;
props.put("orabpel.platform", "ias_10g" );
props.put("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory" );
props.put("java.naming.provider.url","opmn:ormi://host:port/orabpel" );
props.put("java.naming.security.principal", "adminuser" );
props.put("java.naming.security.credentials", "mdp" );
String securityCredentials = "adminuser";
String selectedDomain = "default";
locator = new Locator(selectedDomain,securityCredentials,props);
IBPELProcessHandle procs[] = locator.listProcesses();
The error is:
Exception in thread "main" java.rmi.UnmarshalException: Error deserializing return-value: java.io.InvalidClassException: com.oracle.bpel.client.BPELProcessHandle; local class incompatible: stream classdesc serialVersionUID = 5429682712928177644, local class serialVersionUID = 8176841433835717563
at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:82)
at com.oracle.bpel.client.Locator.listProcesses(Locator.java:309)
Thanks for help.
Edited by: 857737 on 14 sept. 2012 10:00 -
Http 404 error while opening Siebel Public Sector Web Client
Hello Experts
I recently migrated to siebel web client and tools 8.2.2 from 8.2. However the issue that i have been facing now is that when i open my client i get HTTP 404 Not Found- The Web Page cannot be found.
Things that i have done to configure:
1. Enabled ActiveX settings-Settings as given in http://www.siebeloracle.com/accessing-oracle-siebel-8-1-using-windows-7-ie8-works-on-32-bit-os/
2. EnableFQDN: FALSE, FQDN: Commented.
3. My ODBC and public sector cfg have been configured as per need.
Strangely what i have encountered is that: sometimes of 1 out 30 trials, when my client opens up [P(opening client)->0 i.e. Probability is close to 0] the port number is 8081 whereas in other instances it is 8080 which i guess is by default.
URL: http://localhost:8080/start.swe
I have tried reinstalling the client but still i face the same issue.
Kindly help me out with this issue.
Regards
KTHi,
I see that its not a problem with the installation but some problem with the port 8080. I feel some other application is running by default on that port. So, everytime whenever I have to launch Siebel Web client, I have to launch 2 instances. (8080 and 8081). So, the instance which launches on port 8081 + works fine.
I see this process to be time consuming as I have to wait for 2 instances to open up. Hence, is there any way to define the default launch of the port when the client opens up?
Thanks and Regards
KT
Edited by: 1005486 on May 13, 2013 12:01 AM -
Navigation between different componets in IC Web Client for CRM 7.0
Once the user click save button in component ICCMP_BT_BUTTON I need to navigate to component ICCMP_BT_SVO that displays the Service Order Data and display the new Service Request that was created.
How can I do navigation between different componets in IC Web Client for CRM 7.0?
Thanks.
Rodolfo MiãHello,
You can find detailed presentations in the learning maps available on the SAP Service Marketplace http://service.sap.com/rkt-crm for release CRM 2006s, CRM 2007, or CRM 7.0. In case I didn't mention it before, Intent-Driven Interaction (IDI) was first introduced and is only available starting with CRM 2006s and above. In the Interaction Center area, there is a presentation called "Rule Based Automation and Guidance" which covers IDI. I'm not sure if you can access the URL directly, but just in case here it is: [https://websmp104.sap-ag.de/~sapidb/011000358700001162852007E].
Warm regards,
John -
Using interactive forms with in IC web client
Hi,
I had requirement to implement the Adobe Interactive Forms (PDF) with in IC Web Client.
The requirement is to
1. Display an adobe interactive form (PDF) in the IC Web Client when a particular link is pressed.
2. Then the user has to enter the data and the data captured from the interactive PDF Form that should be processed by the ICWC.
An example of the process could be, having a PDF form to enter customer data and creating a Business Partner using the data from PDF.
I would like to know the possibility of such a scenario.
Form ICWC point of view; if we have URL that is points to a callable interactive form object then it can be trigged form ICWC.
This is an assumption and I am not sure that these kinds of objects are supported by ICWC frame work.
If we assume such a URL can be managed and if possibly shown in the ICWC UI, then the next question would be How to retrieve the entered data in the PDF Form as the ABAP data for the View in IC Web client to do the further processing?".
As I am short of options please provide me help if anybody know anything on this issue.
Best regards,
Balaji VAs of SAP NetWeaver 04 (in SAP Web Application Server), you can use a new solution to
create interactive forms and print forms for the optimization of your
form-based business processes. This solution uses Portable Document Format (PDF)
and software from Adobe Systems Inc. that has been integrated into the SAP environment.
You can create interactive forms in PDF format that allow users to
fill out the form on the screen and save their entries in XML format in the form.
When the SAP system receives the PDF form, it extracts the data saved in the form,
and can process it further.
for more info check out the following link
http://help.sap.com/saphelp_crm50/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
hope this helps
RH
Maybe you are looking for
-
CALL_FUNCTION_NOT_FOUND because of wrong reference of XML SOAP Datasource
Hello all, I have created an XML DataSource (SOAP) and generated an function module XYZ_001. Due to some changes I have recreated the DataSource and in course of that I have regenerated the function module XYZ_001. When I execute the infoPackage I ge
-
Hi We are using SSAS 2008 r2 and have a cube on our data warehouse, this has been running fine for quite a while now. However it failed yesterday with the error message: Errors in the OLAP storage engine: The attribute key cannot be found when proces
-
I get no video on element 10 tutorial, but do get sound. I get video on browser YouTube
I get no video on element 10 tutorials, but I do get sound. I do get video on YouTube Adobe through my browser. How do i get the picture - I can hear a dialog.
-
Find purchasing org based on PO no.
Hi Guys and girls. I am doing some changes to the sus PO smartform (standard form BBP_SUSPO) and one af the requirements is that the footer type should be determined by purchasing org. But now I cannot find any tables where I can find the purchasing
-
ICal subscriptions won't update in iOS7
Since updating to iOS7, some iCal subscriptions don't update, TripCase, particularly. Suggestions?