Web dispatcher connection refused

Dear all, I have installed a web dispatcher and when I start them, in the trace file i can see the next error messagen,
[Thr 517] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
[Thr 517] *** ERROR => Connection request from (-1/65535/0) to host: ECPOAP05.corp, service: 8000 failed (NIEHOST_UNKNOWN) [icxxconn_mt.c 2731]
[Thr 517] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c 4885]
There is somebody that knows this error. thanks very much

Dear Elena,
what we can see from this error message is :
that a client request should be done trying to connect
to the host ECPOAP05.corp and port 8000 ..
The NIEHOST_UNKNOWN implies that on network level the
hostname can't be resolved.
The error rc=-8 means that an error within the SAP network layer Ni was caused due to communication problems
(not being able to resolve the hostname)
It would be fine if you could describe the latest occuring problems and we can try to give you additional help.
Kind Regards
Thomas Alt

Similar Messages

  • Web Dispatcher Connection to another host if Message Server not reached

    Hi Folks,
    Basically, the SAP Web dispatcher gets information which it needs for load distribution from the message server. If the message server is available the web dispatcher connects itself using the parameter rdisp/mshost.
    May i know if there is any parameter to enable connection to another host in case of e.g. a hardware failure and the message server is not able to receive any quests anymore from the web dispatcher?
    Regards,
    Collosis

    Hi,
    >May i know if there is any parameter to enable connection to another host in case of e.g. a >hardware failure and the message server is not able to receive any quests anymore from the web >dispatcher?
    There is no such parameter and it would not make any sense. There is only one Message server to connect to.
    If you need High availability you need to suppress the SPOFs.
    The Message server is one, the web dispatcher is another one.
    For this need, my CI and my web dispatcher are clusterised with MSCS.
    Regards,
    Olivier

  • Connection refused While Calling a Web Service from WebDynpro Application.

    Hi all,
    I've created a Webdynpro application by importing a WSDL file which is created from a
    Web Service from XI.
    While I run this Application, and while it tries to connect to XI, I am getting following
    error.
    <b>Service call exception; nested exception is: java.net.ConnectException: Connection refused</b>
    Can Someone please help me out on this issue?
    Thanks in advance,
    Tejas.

    Hi,
    In my WebDynpro Application which is created by Importing a WSDL file from XI Web
    Service is giving error : <b>Service call exception; nested exception is: java.net.ConnectException: Connection </b>
    In NWDS-> Windows Menu-> Preferances -> Wrokbench -> Proxy Settings
    Use Proxy Settings is <b>Checked</b>.
    My Settings in Model's Logical Port is
    <b>Use HTTP Port</b> is <b>Checked</b>.
    In Securities-> <b>Authentication</b> is set to '<b>None</b>'
    With this While I Execute the Application and when it tries to connect to XI..it throws
    an error :
    Service call exception; nested exception is: java.net.ConnectException: Connection
    refused
    Kindly help me on this issue.
    Thanks in advance,
    Tejas.

  • Connection Refused while invoking Web Service from BPEL process

    Hie
    I am getting the following error when I try to invoke a web service (created in JDeveloper) from a BPEL process.
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="code">
    <code>Server.userException</code>
    </part>
    <part name="summary">
    <summary>when invoking endpointAddress '.......................', java.net.ConnectException: Connection refused: connect</summary>
    </part>
    <part name="detail">
    <detail>AxisFault faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException faultSubcode: faultString: java.net.ConnectException: Connection refused: connect faultActor: faultNode: faultDetail: {http://xml.apache.org/axis/}stackTrace:java.net.ConnectException: Connection refused:
    Did anyone come across a similar problem...??? Plz help:(

    Hi everybody,
    I have the same problem. I developed a sample bpel process and tried to access it form another one, but still having the same exception :
    <remoteFault>
    <part name="code" >
    <code>Server.userException</code>
    </part>
    <part name="summary" >
    <summary>when invoking endpointAddress 'http://set.by.caller', java.net.UnknownHostException: set.by.caller</summary>
    </part>
    <part name="detail" >.......
    Thanks for your help!
    miroo

  • Web Services/BPEL - Connection Refused Error

    I am getting the following error while invoking this web service (in JDev 10.1.2) from Oracle BPEL console...
    faultSubcode: faultString: java.net.ConnectException: Connection refused: ..............
    Did anyone face the same error...pleaseeee help!!!

    where is your web service deployed?

  • Web Dispatcher does not connect to J2EE..

    Hi,
    The web dispatcher is not connecting to the J2EE anymore. This was working fine until i installed the SSL certificate on the J2EE engine. The dev_webdisp log file shows messages as below
    [Thr 4880] Tue Aug 28 14:56:48 2007
    [Thr 4880] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 8;205.178.189.131:56000) [nibuf.cpp    4603]
    [Thr 4880] *** ERROR => Connection request to host: cpcep2.pnrw.org, service: 56000 failed (NIECONN_REFUSED) [icxxpool.c   1948]
    i am able to telnet from the webdispatcher to the portal on port 56000.
    Portal is on EP7 SP12
    any idea why this might have occured ? and how to get the connection back ?
    Thanks in advance!!

    Check out the following links...it deals with setting up Web Dispathcer with SSL
    http://help.sap.com/saphelp_nw70/helpdata/en/d8/a922d7f45f11d5996e00508b5d5211/frameset.htm
    This link points to the SSL Paramters to be configured in the profile file.
    http://help.sap.com/saphelp_nw70/helpdata/en/d8/a922d7f45f11d5996e00508b5d5211/frameset.htm
    -Abhishek

  • Could not connect to backend system through portal via Web Dispatcher

    Web dispatcher redirecting problem
    Dear Experts,
    I have implemented a scenario which comprised of customizing that is developed in Portal EP7. What customizing does is getting report from backend system (ERP 6.0)
    According to the needs for reaching the portal from internet I configured the SAP Web Dispatcher in the environment as you may see its contents below.
    The problem is when I run the customizing in portal system then it requires connecting to backend system (ECC 6.0) to get the data (report). But from this point on web browser comes to a blank page, could not view the data that is from backend system via portal. Because in the time when it tries to retrieve data in backend system, on the left bottom of the explorer the indicator shows internet address that system uses connecting to the backend system as local network address of the backend system which is not known in internet therefore I get blank page.
    The question is how to configure the web dispatcher in a way that both portal and backend systems could be reachable from internet?
    Contents of profile file of Web Dispatcher as;
    SAPSYSTEMNAME = WDP
    SAPGLOBALHOST = portald
    SAPSYSTEM = 02
    INSTANCE_NAME = W02
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    rdisp/mshost = portald
    ms/http_port = 8101
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    SAP Web Dispatcher Ports
    #icm/server_port_0 = PROT=HTTP,PORT=81$$
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=60000
    icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/index.html
    icm/HTTP/redirect_0 = PORT=50000
    #maximum number of concurrent connections to one server
    wdisp/HTTP/max_pooled_con = 500
    wdisp/HTTPS/max_pooled_con = 500
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    Regards,
    Ali Taner

    Hi,
    To resovle this you must have registered FQDN for your backend system as well. When you call the report from Portal using internet it should call that FQDN of your backend system then DNS will resolve this & you will get the expected page. This way only you can resolve this issue.
    Thanks,
    Sachin Sable

  • "Connection refused" when using Java client for Web Service

    I deployed a web service to Weblogic Server 7.0 running on Windows 2000. I can
    use IE browser to see its WSDL perfectly but when I run the Java client, the proxy
    method call generates the following error:
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
    at java.net.Socket.connect(Socket.java:426)
    at java.net.Socket.connect(Socket.java:376)
    at java.net.Socket.<init>(Socket.java:291)
    at java.net.Socket.<init>(Socket.java:119)
    at weblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
    lientBinding.java:412)
    at weblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
    lientBinding.java:390)
    at weblogic.webservice.binding.soap.HttpClientBinding.send(HttpClientBin
    ding.java:246)
    at weblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
    ndler.java:34)
    at weblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
    :131)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:417)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:359)
    at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    181)
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    207)
    at CenterWSClient.main(CenterWSClient.java:73)
    javax.xml.rpc.JAXRPCException: Failed to send request:java.net.ConnectException:
    Connection refused: connect
    at weblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
    ndler.java:37)
    at weblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
    :131)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:417)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:359)
    at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    181)
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    207)
    at CenterWSClient.main(CenterWSClient.java:73)
    Exception in handler's handleRequest().
    java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: Conn
    ection refused: connect; nested exception is:
    javax.xml.rpc.soap.SOAPFaultException: Connection refused: connect
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    186)
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    207)
    at CenterWSClient.main(CenterWSClient.java:73)
    Caused by: javax.xml.rpc.soap.SOAPFaultException: Connection refused: connect
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:459)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:359)
    at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
    at weblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    181)

    In your client program, when you do "new XXX_Impl(String wsdlurl)", did you
    pass in the wsdl you were hitting with browser?
    -Neal
    "Ray Yan" <[email protected]> wrote in message
    news:[email protected]...
    >
    I deployed a web service to Weblogic Server 7.0 running on Windows 2000. Ican
    use IE browser to see its WSDL perfectly but when I run the Java client,the proxy
    method call generates the following error:
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
    atjava.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
    at java.net.Socket.connect(Socket.java:426)
    at java.net.Socket.connect(Socket.java:376)
    at java.net.Socket.<init>(Socket.java:291)
    at java.net.Socket.<init>(Socket.java:119)
    atweblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
    lientBinding.java:412)
    atweblogic.webservice.binding.soap.HttpClientBinding.createSocket(HttpC
    lientBinding.java:390)
    atweblogic.webservice.binding.soap.HttpClientBinding.send(HttpClientBin
    ding.java:246)
    atweblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
    ndler.java:34)
    atweblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
    :131)
    atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:417)
    atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:359)
    atweblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    181)
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    207)
    at CenterWSClient.main(CenterWSClient.java:73)
    javax.xml.rpc.JAXRPCException: Failed to sendrequest:java.net.ConnectException:
    Connection refused: connect
    atweblogic.webservice.core.handler.ClientHandler.handleRequest(ClientHa
    ndler.java:37)
    atweblogic.webservice.core.HandlerChain.handleRequest(HandlerChain.java
    :131)
    atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:417)
    atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:359)
    atweblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    181)
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    207)
    at CenterWSClient.main(CenterWSClient.java:73)
    Exception in handler's handleRequest().
    java.rmi.RemoteException: SOAPFault:javax.xml.rpc.soap.SOAPFaultException: Conn
    ection refused: connect; nested exception is:
    javax.xml.rpc.soap.SOAPFaultException: Connection refused: connect
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    186)
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    207)
    at CenterWSClient.main(CenterWSClient.java:73)
    Caused by: javax.xml.rpc.soap.SOAPFaultException: Connection refused:connect
    atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:459)
    atweblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
    a:359)
    atweblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:225)
    atweblogic.jws.proxies.CenterWSSoap_Stub.update(CenterWSSoap_Stub.java:
    181)

  • Web dispatcher can't connect msserver

    hi, experts,
    Our web dispatcher B is in DMZ1, which faces internet directly, and I wanna its msserver is A which is in Core, which only in protection zone.
    Now, DMZ1 has allowed Core with port 8111, but when start web dispatcher, it says error in dev_webdisp,  following is details:
    [Thr  1] Mon Sep 19 11:35:06 2011
    [Thr  1] Profile configuration error detected, use temporary corrected setup
    [Thr  1] Shared Pool 10: ipc/shm_psize_10 = 19880000 (too small)
    [Thr  1] Shared Pool 10: (smaller than min requirement 150848560)
    [Thr  1] started security log to file dev_icm_sec
    [Thr  1] SAP Web Dispatcher running on: dga114
    [Thr  1] MtxInit: 30001 0 2
    [Thr  1] IcmInit: listening to admin port: 65000
    [Thr  1] WLM Tag 'CWI/ICM' successfully set for this process
    [Thr  1] IcrCoreInitSessionTable: Session table initialized
    [Thr 515] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject not set
    => do not trust any intermediary
    X.509 cert data will be removed from header [http_plgrt_m 730]
    [Thr 515] HttpExtractArchive: files from archive /usr/sap/CWI/SYS/exe/run/wdispadmin.SAR in directory /usr/sap/CWI/W05/data/icmanroo
    t are up to date
    [Thr 515] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=0, flags=4101) for /sap/admin:0
    [Thr 515] CsiInit(): Initializing the Content Scan Interface
    [Thr 515]            IBM RS/6000 with AIX (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
    [Thr 515] CsiInit(): CSA_LIB = "/usr/sap/CWI/SYS/exe/run/libsapcsa.o"
    [Thr 515] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=1, flags=12293) for /:0
    [Thr 515] HttpSubHandlerAdd: Added handler HttpWebDispHandler(slot=2, flags=28677) for /:0
    [Thr 515] Started service 8005 for protocol HTTP on host "dga114"(on all adapters) (processing timeout=60, keep_alive_timeout=30)
    [Thr  1] IcmCreateWorkerThreads: created worker thread 0
    [Thr  1] IcmCreateWorkerThreads: created worker thread 1
    [Thr  1] IcmCreateWorkerThreads: created worker thread 2
    [Thr  1] IcmCreateWorkerThreads: created worker thread 3
    [Thr  1] IcmCreateWorkerThreads: created worker thread 4
    [Thr  1] IcmCreateWorkerThreads: created worker thread 5
    [Thr  1] IcmCreateWorkerThreads: created worker thread 6
    [Thr  1] IcmCreateWorkerThreads: created worker thread 7
    [Thr  1] IcmCreateWorkerThreads: created worker thread 8
    [Thr  1] IcmCreateWorkerThreads: created worker thread 9
    [Thr 3343] IcmWatchDogThread: watchdog started
    [Thr 773] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 4 / sock 12
        (SI_ECONN_REFUSE/79; I4; ST; 10.180.225.107:8111) [nixxi.cpp    2845]
    [Thr 773] *** ERROR => Connection request from (-1/65535/0) to host: dga107, service: 8111 failed (NIECONN_REFUSED) [icxx
    conn_mt.c 2759]
    [Thr 773] *** ERROR => IcmConnClientRqCreate() failed (rc=-8) [icrxx_mt.c   5284]
    [Thr 773] *** ERROR => Could not connect to SAP Message Server at dga107. URL=/msgserver/text/logon?version=1.2 [icrxx_mt.c   2634]
    [Thr 773] *** ERROR => rc=-1, HTTP response code: 0 [icrxx_mt.c   2635]
    [Thr 773] *** ERROR => see also OSS note 552286 [icrxx_mt.c   2636]
    Do you have any suggestion to solve such problem?
    and in DMZ1, may I telnet Core 8111?
    Thanks a lot!
    BestRegards,
    Lily

    hi,Srihari,
    We check the connection what you mentioned.DMZ1 is OK for Core and Port 8111.We open 8111 in Core as telnet port too. I try to use such command:
    dga114:cwiadm 9> sapwebdisp -bootstrap
    SAP Web Dispatcher Bootstrap
    ============================
    This bootstrap will perform the following steps:
    1. create profile file "sapwebdisp.pfl"for SAP Web Dispatcher (if not already existing)
    2. create user for web based administration in file "icmauth.txt"(if not already exisiting)
    3. start SAP Web Dispatcher with the created profile
    After the bootstrap you can use the web based administration
    Generating Profile "sapwebdisp.pfl"
    Hostname of Message Server (rdisp/mshost): dga107
    HTTP Port of Message Server (ms/http_port): 8111
    Checking connection to message server...
    ERROR: Illegal data received (no HTTP?) -
    please check that 8111 is really the HTTP port of the Message Server
    and I think the parameter doesn't matter about this problem, does it?
    Thanks for your reply.
    Best Regards,
    Lily

  • Issues with our SSL connection to the Web dispatcher

    HI Alle,
    I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
    Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
    [Thr 368] =================================================
    [Thr 368] = SSL Initialization  on  PC with Windows NT
    [Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 368] =   found SECUDIR environment variable
    [Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 368] * ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 4129 (0x00001021) = "The PSE does not exist"*
    [Thr 368] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 368] << -
    End of Secude-SSL Errorstack -
    [Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
    [Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 368] =================================================
    [Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
    [Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    [Thr 2128] IcmCreateWorkerThreads: created worker thread 0
    Regards

    Hi Olivier,
    Thanks for replay,
    The PSE does exist  in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"  .
    I did tried Again I get  this error. I think I missing som parameter
    = SSL Initialization  on  PC with Windows NT
    [Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
    [Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
    [Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
               resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
    [Thr 2292] =   found SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe
    [Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
    [Thr 2292] =   found SECUDIR environment variable
    [Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
    [Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
    [Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
    [Thr 2292] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    -*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
    ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
    [Thr 2292] << -
    End of Secude-SSL Errorstack -
    [Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
    [Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 2292] =================================================
    [Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
    [Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
    Her is my profile parameter for https.
    h6*#Https parameters for Web dispatcher  E:\usr\sap\WDP\W00\sec
    #icm/server_port_0 = PROT=HTTPS,PORT=443$$
    DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
    ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
    ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
    ssf/name = SAPSECULIB
    wdisp/ssl_encrypt = 0
    icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
    ###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
    ########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
    icm/HTTPS/verify_client=0
    wdisp/add_client_protocol_header = true
    wdisp/auto_refresh = 120
    wdisp/max_servers = 100
    wdisp/ssl_auth= 0
    ms/https_port = 8400
    wdisp/HTTP/use_pool_for_new_conn=1
    wdisp/HTTPS/dest_logon_group = HTTPS
    #wdisp/server_info_protocol = https
    #wdisp/group_info_protocol = https
    #wdisp/url_map_protocol = https
    wdisp/ssl_ignore_host_mismatch = fals
    icm/HTTPS/forward_ccert_as_header = true
    icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
    icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
    Regards

  • Remote Connection to SAP with SAP Web Dispatcher

    Dear Experts,
    i have installed a SAP Router + SAP ECC 6.0 IDES + SAP Portal 7.0 + SAP Solution Manager 7.0. The remote connection works.
    SAP Router is in a DMZ
    SAP ECC 6.0 IDES + SAP Portal 7.0 + SAP Solution Manager 7.0 are in another network only for SAP Systems
    Fo security reason, i would like to install a SAP Webdispatcher with the SAP Router's Server.
    I already:
    have extracted the icmadmin.sar file
    have executed the sapwebdisp -bootstrap command
    have started the web dispatcher with sapwebdisp pf=sapwebdisp.pfl
    have activated /sap/public/icman and /sap/public/icf_info/* services inthe SAP Solution Manager
    As the saprouttab file for the saprouter, i would like to establish the connection to SAP withe the SAP WebDispatcher.
    My questions are:
    What are the parameters i have to put in the sapwebdisp.pfl file?
    Do i have to create the PERMFILE and the AUTHFILE?
    Any example of profil file? (another than the SAP Library example)
    Thank you very much for your help in advance.
    Best regards.
    Pascal Tran.
    PS: Here is the sapwebdisp.pfl file
    Profile generated by sapwebdisp bootstrap
    unique instance number
    SAPSYSTEM = 50
    add default directory settings
    DIR_EXECUTABLE = .
    DIR_INSTANCE = .
    Accessibility of Message Servers
    rdisp/mshost = <Solution_Manager_hostanme>
    rdisp/msserv = sapms<Solution_Manager_SID>
    ms/http_port = 81<Solution_Manager_Instance_Number>
    SAP Web Dispatcher Parameter
    wdisp/auto_refresh = 120
    wdisp/max_servers = 100
    wdisp/shm_attach_mode = 6
    configuration for default scenario (medium size)
    icm/max_conn      = 500
    icm/max_sockets   = 1024
    icm/req_queue_len = 500
    icm/min_threads   = 10
    icm/max_threads   = 50
    mpi/total_size_MB = 80
    #maximum number of concurrent connections to one server
    wdisp/HTTP/max_pooled_con = 500
    wdisp/HTTPS/max_pooled_con = 500
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=8050
    SAP Web Dispatcher Web Administration
    icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt
    Hostname per default
    icm/host_name_full = <SAP_Router_Hostname>

    Hello,
    The two important paramters are covered in your profile.
    Accessibility of Message Servers
    rdisp/mshost = <Solution_Manager_hostanme>
    rdisp/msserv = sapms<Solution_Manager_SID>
    ms/http_port = 81<Solution_Manager_Instance_Number>
    And the port on which your webdispatcher listens from outside world.
    icm/server_port_0 = PROT=HTTP,PORT=8050
    For additional security you can use the https port also.
    I dont think you need to maintain any other file manually.
    I had configured web dispatcher but for 640 stack. It should be more or less the same.
    An example file sapwebdisp.pfl
    Profile generated by sapwebdisp bootstrap
    unique instance number
    SAPSYSTEM = 1
    Accessibility of Message Servers
    rdisp/mshost = <hostname>
    ms/http_port = 8101
    ms/https_port = 8005
    SAP Web Dispatcher Parameter
    wdisp/auto_refresh = 120
    wdisp/max_servers = 100
    wdisp/shm_attach_mode = 6
    configuration for default scenario (medium size)
    icm/max_conn      = 500
    icm/max_sockets   = 1024
    icm/req_queue_len = 500
    icm/min_threads   = 10
    icm/max_threads   = 50
    mpi/total_size_MB = 80
    #maximum number of concurrent connections to one server
    wdisp/HTTP/max_pooled_con = 500
    wdisp/HTTPS/max_pooled_con = 500
    wdisp/shm_attach_mode = 6
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTPS,PORT=1443
    icm/server_port_1 = PROT=HTTP,PORT=1081
    icm/HTTPS/verify_client = 0
    SAP Web Dispatcher Web Administration
    icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin
    DIR_INSTANCE = C:\Secudir
    ssl/ssl_lib = C:\Secudir\sapcrypto.dll
    ssl/server_pse= C:\Secudir\SAPSSLS.pse
    wdisp/ssl_cred = SAPSSLS.pse

  • SMC 3.6 Web console login - Connection refused

    Hi Folks,
    I have recently installed SMC 3.6 on a Solaris 5.8 machine with Sun Blade 100 platform. The installation and setup were completed successfully and the web server was started without any hiccups. But when I enter my username and password, it throws the error connection refused.The user name that I am using is included in /var/opt/SUNWsymon/cfg/es-users file.
    Thanks in advance.

    Please note that the user you create must be an actual UNIX user. To add a user:
    # useradd anilhs
    # passwd anilhs
    You may also want to add the anilhs user to the various Sun MC groups in /etc/group:
    For example, for admin priviledges:
    esadm::root,anilhs
    esdomadm::root,anilhs
    If further problems persist, can you create an esmaster Unix user and try logging in using "esmaster". It is the default super user account for Sun MC.
    cheers,
    bobby
    http://www.Halcyoninc.com

  • Getting connection error after installing Web Dispatcher for JAVA engine

    Hi SAP Guru's,
    I have installed Web Dispatcher instance on solution manager server machine for Production JAVA portal. I am getting below error when I am trying to access Production JAVA portal.
    500 Dispatching Error
    Error: -26
    Version: 7000
    Component: HTTP_ROUTE
    Date/Time: Sat Feb 05 16:18:12 2011 
    Module: http_route.c
    Line: 3139
    Server: ERPSOL_WDP_04
    Error Tag:
    Detail: no valid destination server available for '!ALL' rc=13
    Where as I have define all suitavle parameters in Web Dispatcher instance profile
    SAPSYSTEMNAME = WDP
    SAPGLOBALHOST = ERPSOL
    SAPSYSTEM = 04
    INSTANCE_NAME = W04
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_CT_RUN)
    Accesssability of Message Server
    rdisp/mshost = sapepjlg.pdilnoida.com
    ms/http_port = 8102
    Configuration for medium scenario
    icm/max_conn = 500
    icm/max_sockets = 1024
    icm/req_queue_len = 500
    icm/min_threads = 10
    icm/max_threads = 50
    mpi/total_size_MB = 80
    SAP Web Dispatcher Ports
    icm/server_port_0 = PROT=HTTP,PORT=8105
    Please help on this as I have to deliver this before go live.
    Regards,
    Bijay

    Hi Bijay,
    Please check if services /public/icman, /public/icm_info are active & accessible in SICF(in case of Dual stack system) tx.
    Regards,
    Neeraj

  • Web Browser Management Connection Refused

    Since upgrading from my old Panther PowerBook to my new Tiger one, I have lost the ability to manage my Netgear router and my HP network printer via Safari. Strangely, my Netgear router at home actually works better (I used to have to go back into OS9 to change settings as Panther didn't work at all), but the devices on the corporate network at work don't seem to like Tiger. I get this message:
    (111) Connection refused
    I don't really now how to troubleshoot this...
    Oh, and it's the same with other people's Tiger Macs - and from 10.4.3ish on.
    Thanks!

    I don't think it can be that simple because it is consistent across more than one machine and it doesn't work from Firefox either (just checked that).
    I think it must be to do with being on the corporate network, so I need to know what might have changed in the Mac OS that would cause this issue. I recently lost the ability to access the Exchange server, which turned out to be due to a change in Mail's SOCKS access under 10.4.7 (fine under 10.4.6). Something similarly obscure (to me) could be causing this other issue, but I've no idea what...

  • SAP Web Dispatcher in a high availability environment

    Hello, guys
    We are working in a CRM 7.0 implementation Project. Our system landscape is the following:
       - Two hosts (host1 & host2) on MSCS cluster (Windows 2008) with SQL Server and ASCS in high availability. Additional, this MSCS cluster has a instance of SAP Web Dispatcher.
       - In these two host weu2019ve installed a CI & DI instance, outside of high availability scope
       - Two additional hosts (host3 & host4) with one dialog instance in every host
    We have severe problems with communication between SAP Web Dispatcher and ICM components. Our configuration schema is the next:
       - ASCS (MSCS_virtual_hostname):
    ms/server_port_0 = PROT=HTTP,PORT=8141
    SAPLOCALHOSTFULL = <MSCS_virtual_hostname>.<domain>
       - IC (host1)
    icm/server_port_0 = PROT=HTTP,PORT=8040,TIMEOUT=90,PROCTIMEOUT=600
    icm/host_name_full = <host1>.<domain>
       - ID1 (host2)
    icm/server_port_0 = PROT=HTTP,PORT=8044,TIMEOUT=90,PROCTIMEOUT=600
    icm/host_name_full = <host2>.<domain>
       - ID3 (host3)
    icm/server_port_0 = PROT=HTTP,PORT=8045,TIMEOUT=90,PROCTIMEOUT=600
    icm/host_name_full = <host3>.<domain>
       - ID4 (host4)
    icm/server_port_0 = PROT=HTTP,PORT=8046,TIMEOUT=90,PROCTIMEOUT=600
    icm/host_name_full = <host4>.<domain>
       - SAP Web Dispatcheer (MSCS_virtual_hostname):
    SAPGLOBALHOST = <MSCS_virtual_hostname>
    SAPLOCALHOSTFULL = <MSCS_virtual_hostname>.<domain>
    SAPLOCALHOST = <MSCS_virtual_hostname>
    SAPLOCALHOST = <MSCS_virtual_hostname>
    ms/http_port = 8141
    icm/server_port_0 = PROT=HTTP, PORT=8042,TIMEOUT=30,PROCTIMEOUT=600
    wdisp/add_xforwardedfor_header = TRUE
    In SAP Web Dispatcher log weu2019ve found the following error messages:
    Fri Jan 28 15:45:22 2011
    ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused)
    *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 130060
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.6.182:8044)
    *** ERROR => Connection request to host: , service: 8044 failed (NIECONN_REFUSED)
    SAP Web Dispather is trying to connect to connect with dialog instances through , which itu2019s incorrect (ports 8044, 8045 & 8046 are opened in dialog instances, not in virtual instance). I think it should try with real hostnames (host1, host2, host3 & host4).
    ¡¡Please, help!! Thanks in advance

    Hello, Karthi,
    Our Web Dispatcher profile looks as following:
    Instance specific parameters
    Maybe some of these parameters are needless
    SAPSYSTEMNAME = <CRM SID>
    INSTANCE_NAME = <WD SID>
    SAPSYSTEM = <WD System number>
    SAPGLOBALHOST = <virtual hostname of WD>
    SAPLOCALHOSTFULL = <FQDN of virtual hostname of WD>
    SAPLOCALHOST = <virtual hostname of WD>
    Directorios
    DIR_INSTANCE = R:\usr\sap\wd
    DIR_INSTALL = R:\usr\sap\wd
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = R:\usr\sap\wd
    DIR_PROFILE = R:\usr\sap\wd
    DIR_HOME = R:\usr\sap\wd
    DIR_ICMAN_ROOT = $(DIR_INSTANCE)\icmanroot
    R:\usr\sap\wd\global\security\data
    Accesibilidad al Message Server
    rdisp/mshost = <virtual hostname of CRM Message Server>
    ms/http_port = <HTTP port of CRM Message Server>
    HTTP Settings
    Puerto estandar de acceso HTTP
    icm/server_port_0 = PROT=HTTP, PORT=8042,TIMEOUT=30,PROCTIMEOUT=600
    These parameters defines load balancing weights
    #wdisp/server_00 = NAME=<hostname_SID_SYSNR>, LB=4, ACTIVE=0
    #wdisp/server_01 = NAME=<hostname_SID_SYSNR>, LB=10, ACTIVE=1
    #wdisp/server_02 = NAME=<hostname_SID_SYSNR>, LB=20, ACTIVE=1
    #wdisp/server_03 = NAME=<hostname_SID_SYSNR>, LB=20, ACTIVE=1
    Puerto de acceso interfaz web de administrador
    icm/HTTP/admin_0 = PREFIX=/sap/admin, DOCROOT=$(DIR_ICMAN_ROOT)/admin, AUTHFILE=$(DIR_INSTANCE)\sec\icmauth.txt
    Activaciu00F3n de la cachu00E9 de SAP Web Dispatcher
    icm/HTTP/server_cache_0/http_cache_control = true
    icm/HTTP/server_cache_0 = PREFIX=/, CACHEDIR=$(DIR_INSTANCE)\cache
    Fichero de log de seguridad
    icm/security_log = LOGFILE=$(DIR_HOME)\log\security_%y%m%d.log, SWITCHTF=day, MAXSIZEKB=1024, FILEWRAP=off
    icm/HTTP/logging_0 = PREFIX=/, LOGFILE=$(DIR_HOME)\log\wd_log_%y%m%d.log, SWITCHTF=day, MAXSIZEKB=1024, FILEWRAP=off
    icm/log_level = 1
    Dispatcher Configuration
    wdisp/add_xforwardedfor_header = FALSE
    Parametrizacion de memoria
    Datos de sizing de los que se parten                                #
    #users = 1800 usuarios (900 concurrentes)
    #req_per_dialog_step = 6 peticiones HTTP por paso
    #thinktime_per_diastep_sec = 10 seg. de "thinktime"
    #conn_keepalive_sec = 30 seg. mantener conexiu00F3n abierta con ICM
    #icm/max_conn = users * req_per_dialog_step * conn_keepalive_sec / thinktime_per_diastep_sec
    icm/max_conn = 16200
    wdisp/HTTP/max_pooled_con = icm/max_conn
    wdisp/HTTP/max_pooled_con = 16200
    icm/max_sockets = al menos la suma de icm/max_conn y wdisp/HTTP/max_pooled_con
    icm/max_sockets = 32400
    mpi/buffer_size = 64K = 64 * 1024 = 65536
    mpi/buffer_size = 65536
    mpi/total_size_MB = icm/max_conn * mpi/buffer_size (hay que convertir mpi/buffer_size a MB)
    mpi/total_size_MB = 1024
    icm/req_queue_len = icm/max_conn / 2
    icm/req_queue_len = 8100
    icm/min_threads = icm/max_conn / ~50
    icm/min_threads = 512
    icm/max_threads = icm/max_conn / ~20
    icm/max_threads = 1024
    Parametrizacion de seguridad
    Evitar el envu00EDo de mensajes tu00E9cnicos al usuario final
    is/HTTP/show_detailed_errors = FALSE
    #icm/HTTP/error_templ_path
    And ICM parameters are:
    - SAPLOCALHOSTFULL= <FQDN of every application server>
    - icm/server_port_0 = PROT=HTTP,PORT=8080,TIMEOUT=90,PROCTIMEOUT=600:
    - icm/host_name_full = <FQDN of every application server>  ## This parameter is ignored if SAPLOCALHOSTFULL is defined
    I hope it helps you.
    Best regards,
    Sergio Su00E1nchez

Maybe you are looking for

  • How can i incorpurate multiple operating unit feature in rdf(Custome AP Report)

    Hi, Team, i have a requirment is..will select 1 Operating unit need to get data for only that OU, if will provide Null value need to get data for ALL OU's. i am trying below script using in Report level 'AfterPForm' if :P_ORG_ID IS NULL THEN MO_GLOBA

  • Keeps asking for iTunes password

    Every once in a while when I unlock the iPad, it asks me for my iTunes password. I think that it might be related to a movie rental download that I have paused (probably because this problem has been popping up ever since I paused the download), but

  • AP load balancing question

    Hi there, is it possible to enable load balancing for a particular group of APs and disabled for the rest. Perhaps AP groups. Running 8500 WLC with 3600 series APs. It will enhance the service concurrent user capacities for areas with a high device c

  • Comparing date in jsp+jstl+el

    I need help because i have to translate from jsp to jstl (using also Datetime Tag Library) but i can't . I have to do currentDate/HOur-Date/hour on DB. Logic the difference in millisec and then the division. But how can operate? Operations are betwee

  • IView not working when added to workset

    Hi all,       I have come across a very strange scenario. I have deployed a PAR file created in NWDS & created an iView out of it. When I preview the iView, it works fine. But when I add the iView to the workset and assign a role to the workset & try