Web I line chart formatting

hi all, I am trying all my best for webI line chart formatting but I don't see much options, quick question is there any button or tool box for formatting WebI line chart except properties tab???
and my requirement is, usually when i turn table to line chart by default X-axis will be lower side and Y-axis will start from left end of X-axis and stand perpendicular to it. But what I need is X-axis should remain same but Y-axis should start from right end of x-axis.
In short and clear Point of intersection of X and Y axis is left end of x-axis but I need point of intersection should be right end of X-axis line. are there any formatting tips???

Hi,
Follow the below steps.
1) Create a dummy measure variable with name ' (Comma) and formula value is =0. (Variable name is ' because if you put any other name that will come in the Legend and its a dummy objects)
2)Select the bar and line graph and put the dummy variable in the Y axis and Y axis value in the Z axis.
3) After that no value will show in the Y axis and your Z axis value show the line graph.
Hope this will help you.
Thanks,
Amit

Similar Messages

Line Chart - Formatting more than 4 lines in line chart

Hi,
How to format more than 4 lines in line chart using Crystal report Designer as by default it will display 4 lines in design mode.
Able to format 4 lines but i have to display total 6 lines.
Urgent. Please help....
Thanks,
ThakurS

Hi,
The design mode is not the right place to edit lines, bars etc for Charts.
You can select individual lines from the Preview Mode and edit them.
Hope this helps!
-Abhilash

Line Chart Formatting in HFR

I am using Financial Reporting for HFM and need a few line charts. I have to display the values of the respective points on the line chart which I did using the display point values checkbox in the Format Chart. However, the values are in $ or % and those prefixes ($, % etc) are not showing up on chart values(just displaying numbers which are rounded without any decimal places). I have formatted the grid where the chart is fetching its data but that is not helping. Anyone has any idea, how this can be done. Please help.

Hi,
The design mode is not the right place to edit lines, bars etc for Charts.
You can select individual lines from the Preview Mode and edit them.
Hope this helps!
-Abhilash

Line Chart Formatting

Hi All,
I have created a line chart with 3 series. I have two questions :
1. My X-Axes brings back 96 rows to display but the only way to see all data is if I use a scroll bar on this axis. I have tried to increase the chart width from 700 to 1000 but this does not have the desired effect. Is there a way to display my data without using the scroll bar ?
2. Is it possible to have the area within a given series line to be shaded in a certain colour so that it is more visually effective ?
Thanks
Edited by: Billy on Aug 24, 2011 2:12 PM

Hi Shane,
The reason you don't see the "Show Scrollbar" option for your chart is because scrolling is not currently supported by HTML 5 charts, and so that option is not visible on the Chart Attributes page when you edit your chart. See the section HTML5 Migration Guide in the AnyChart online documentation for the list of supported features. Note that the scrolling option is listed as "zoom panel", because scrolling is controlled via the <zoom> tags in the chart XML, as outlined in the Zooming and Scrolling section of the AnyChart documentation.
So until AnyChart provide support for scrolling with HTML 5 charts, you'll need to use the Flash chart option.
Regards,
Hilary

Simple line chart formatting problems

I am using the Visual Studio 2008 version of Crystal reports. I am trying to chart the maximum, minimum, and today's prices for natural gas. I have a sql view to that returns 48 rows of data. I want the legend to be MIN. MAX, NOW and the colors to be green for MIN, red for MAX and blue for NOW.
I can not set the legend test, the line color and the x axis labels are not readable. Any suggestions would be helpful.
This is a example of the data:
dtContract    Now    MAX    MIN
5/10    3.975    6.207    3.869
6/10    4.064    6.307    3.965
7/10    4.185    6.419    4.082
8/10    4.28    6.507    4.163
9/10    4.332    6.56    4.207
10/10    4.447    6.667    4.314
11/10    4.827    6.997    4.676
12/10    5.247    7.387    5.096
1/11    5.464    7.597    5.316
2/11    5.433    7.597    5.283
3/11    5.343    7.427    5.172
4/11    5.153    6.907    4.947
5/11    5.17    6.887    4.946
6/11    5.222    6.977    4.988
7/11    5.289    7.077    5.053
8/11    5.341    7.152    5.105
9/11    5.371    7.182    5.138
10/11    5.47    7.262    5.235
11/11    5.722    7.502    5.492
12/11    6.022    7.797    5.792
1/12    6.225    8.002    5.995
2/12    6.167    7.997    5.952
3/12    5.995    7.767    5.77
4/12    5.555    7.144    5.335
5/12    5.555    7.102    5.325
6/12    5.598    7.182    5.368
7/12    5.658    7.277    5.428
8/12    5.711    7.347    5.478
9/12    5.744    7.377    5.513
10/12    5.842    7.457    5.613
11/12    6.082    7.689    5.856
12/12    6.347    7.979    6.129
1/13    6.548    8.184    6.333
2/13    6.503    8.179    6.298
3/13    6.304    7.949    6.088
4/13    5.844    7.264    5.621
5/13    5.821    7.219    5.586
6/13    5.866    7.304    5.636
7/13    5.934    7.399    5.706
8/13    5.989    7.469    5.761
9/13    6.024    7.499    5.796
10/13    6.124    7.584    5.906
11/13    6.364    7.829    6.151
12/13    6.629    8.119    6.421
1/14    6.829    8.324    6.626
2/14    6.789    8.319    6.586
3/14    6.584    8.079    6.381
4/14    6.104    7.399    5.901

Found another work around.

WebI Horizontal stacked chart formatting issue

I have created a stack chart report and I have labels defined in the X - axis. We have the issue with the gap between the X - axis line and the labels. We would like to know if we can reduce this gap between the axis line and the labels. I have attached the sample image below for your reference.
Edited by: Madan Chellu on Aug 31, 2009 11:51 PM

Not really. I need to have stacked bars grouped. For example, assume you had survey results. For question 1, you had a bar with 20 disagrees, 5 neutrals, and 50 agrees. For question 2, a bar with 10 disagrees, 2 neutrals and 30 agrees, and so on for say 10 questions. This would be your stacked bar chart. Now, say you had information spanning a number of years, 2008, 2009, 2010. What I want is a group of stacked bars (3 one for each year) for Q1, then 3 more stacked bars for Q2 and so on.
This is a combination of the grouped and the stacked bar charts.

Webi Line Chart to Start from Axis Origin

Hi,
Need a quick help in BI4.0 webi line chart formatting.
I have datetime on x-axis and cash flow on Y-axis.
Say my cash flow starts at 9am on a day with $100 , my line chart starts the plot from 9am i.e. (9am,$100)
instead I want the line plot to always start from (0,0)
This is probably a chart option, but i dont find it.

Hi Thangaraj,
I have a similar requirement for a line chart to start from 0,0. while its min value is greater than 0.
We are on BO 4.1 SP4 and there is no direct chart option for this.
I would like to know whether you were able to achieve this in web intelligence.
I really appreciate your reply.
Thanks,
Sri

Web Application Designer (Line Charts-Data Points)

Hi
I have to display the query in WEB as a Line Chart
The Query is on Cal Day Vs Mean Value
The user enter the Cal Day (From/To)..the Line chart is supposed to display mean Value on No of Cal Days users choosed.
In query created variable for Cal Day..but how can i define the Data Points for the chart in the Web designer.
Bydefault we have to specift no of data points we required..how can i change that to be based on the range user entered
Than ks

Hi Krishna,
When you define a chart, you define a number of series, but when you run the WAD, it takes the number of series it has the query.
Regards,
Diego

Line chart in WEBI

HI
I have vertical stacked line chart in the webI report and I have no issues with the values and Line chart is perfect, but with in the chart user want's a standard horizontal line perpendicular to Y-axis at value 40. No matter what ever is the prompt value but this standard should be always display at value 40.
I have gone through the properties very well but still not able to recognize?
Thanks,

Hi Arijit ,
I want to create a Stacked bar and line combination chart in Web I B0 XI 3.1 SP5.
I want to show category wise sales in stacked bar and ASP in the line in same chart .
please tell me how to create stached bar line chart in Web Intelligence
Thanks ,
Charu

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

How to convert from line chart data to CSV format

Hi ,
I am using Flex 3 and AS.
I am getting data from MS SQL and display the data as line
chart this is ok.
But i want to convert this line chart data to CSV or .xsl
format.I find one example in fourms the from data grid to CSV
For this URL is
http://www.abdulqabiz.com/blog/archives/flash_and_actionscript/datagriddataexporter.php
But i want Line chart to CSV.Please help me.

Line chart is a just a visual representation of some data
that's sitting in your database. Isn't it? You load this in Flex,
probably using HTTPService class, and pass it to some chart object.
Now when use says that she needs it in CSV format, you're
gonna have to send another request to the server to produce the
same data, convert into CSV or XLS format and let user download it.
Of course, if use doesn't want to download, you don't have to
go to the server, at least for CSV format. You can convert the same
data that used plot the chart to convert to CSV.
Am I missing something here?
ATTA

Is it possible to hide part of the line in webI line chart

I had webI line chart which is showing for 2 months data, and is it possible to hide the line for only first 10 days in the line chart and continue the line after 11 th day till the end?

@rajesh: I didn't understand why should we use Relativedate() function?can you please explain little bit more. Becuase the report has customer exit written such a way that if I run the report today it will show up previous 60 days
For example:
today is 04/06/2011
so in the report date column has values and shows up like
02/06/2011
02/07/2011
02/08/2011
04/05/2011.
So now I should hide/avoid/shouldn't show First 10 days. In example above 02/06/2011, 02/07/2011,02/08/2011.....like wise 10 days so till 02/16/2011 shouldn't be shown in the report. The beginning of the report should start from 02/17/2011 till 04/05/2011..
Edited by: saathiyaa on Apr 6, 2011 9:31 PM

Query for 'User Activity' Webi Line Chart using BO4.0 Auditor

Need to create a webi line chart to measure ‘user activity’ per month, year or day using BO4.0 Auditor on Oracle.
This question raises two sub-questions:
What actions constitute user activity? Is it concurrent logins by users? I am confused if that would really give a true picture of user activity as users can log in and do nothing on the BO system.
If concurrent logins do in fact give a true picture of user activity then how do I go about creating a chart? What objects do I need to include in query?
Please provide feedback?
Thank u.

Hi Ramil,
Follow below steps to create a webi report for your requirement, launch Webi rich client and create a new webi report by selecting "BOEXI40-Audit-Oracle" (Audit universe)
1) Select below objects in 'Result Objects' pane
[Event Year], [Event MonthName],[Event DayofMonth], [Event Type], [User Name], [Total Event Count]
2) Define below conditions in "Query Filter" pane
[Event Type Id] In list 1015 AND [Event Year] In list "Select Year" (Prompt)
3) Run query
4) At report level create a new variable of type measure with the name "User Activity" with below formula
=Count([Total Event Count]In([User Name];[Event MonthName];[Event DayOfMonth]) )
(This formula will track logout event of a each user in a day as well as in a month, it will take/count only one log out event of the user in a day as you desire)
5) Create a table block as well as graphs as you desire
i) For day wise user activity create a table/graph using: [Event DayofMonth], [User Activity]
ii) For month wise user activity create a table/graph using: [Event MonthName], [User Activity]
Let me know if you have any questions
~Manoj

How to use custom function for formatting the Line Chart Axes?

Hi...
I'm using a Line chart who's y axis value range from 0 to 50000. This is a number which it gets from it's dataProvider. I want to format this and show it as
$50,000
$40,000
$30,000
$20,000
$10,000
$0
instead of
50000
40000
30000
20000
10000
0
Here's my linechart code:
<mx:LineChart id="revTimeLineChart"
            width="100%" height="100%"
            showDataTips="true" >
            <mx:horizontalAxis>
               <mx:CategoryAxis id="lcCatAxis" categoryField="name"/>
            </mx:horizontalAxis>
            <mx:series>
               <mx:LineSeries id="ls" yField="revenue" displayName="Revenue" showDataEffect="{slideIn}"/>      (yField is what I want to format....)
            </mx:series>
</mx:LineChart>
Can you please let me know how can this be achieved?
Cheers!
Deepak

Hi,
You could do something like this,
http://www.codersrevolution.com/index.cfm/2008/10/14/Flex-Charting-Format-your-X-and-Y-Axi s
hope it helps!
Regards ,
Bhavika

Line Chart - date format

Hi,
i have some troubles with a "normal" line-chart. (graphType="LINE_VERT_ABS")
The data is something like that:
xvalue           yvalue
01.01.2006     100
02.01.2006     101
03.01.2006     102
04.01.2006     101
01.02.2006     102
02.02.2006     102
03.02.2006     101
01.03.2006     100
02.03.2006     99
03.03.2006     101
I define the chart with:
groups="xvalue" dataValues="yvalue"
worked fine, BUT:
I had to change the date-format from dd.mm.yyyy to "only" mm/yy.
Now just 1 yvalue of every xvalue-group is displayed - the chart has only the following points:
xvalue          yvalue
01/06          100
02/06          102
03/06          100
Does anybody know a solution where every point is shown just with the other date-format?

Change your default system date format.

Web I line chart formatting

Similar Messages

Maybe you are looking for