Web page posted 2 weeks but is not showing up in Google or other search eng

Would there be a reason that a very basic web page created in iWeb would not meet the technical criteria to be included in Googles search page.
It seems like Google have a problem digesting the page.
Does anyone have any experience with that issue?
Christer

Where did you publish your site - to MobileMe? If so, Google is not very good at picking up MME published sites with web.me.com url's - they are only really for personal sites and not business sites.
Also, did you tell Google that your site is there? You need to inform them and other search engines so that your site will be included in searches.

Similar Messages

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Comcast just replaced my cable modem/wireless router. All devices connect properly except my iPhone 4. It shows itself to be connected to the network, but it does not load any web page. Resetting the iPhone does not solve the problem. Any suggestions?

Thank you for your response.
I had rebooted the router (several times, actually), to no avail.
I do not know the answer to whether MAC filtering is enabled on the router. Have tried to find info about that, but unsuccessfully. Router is an Arris TG852G, supplied by Comcast. I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist. To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages. He was unable to connect my iPhone, however, after trying for some time.
I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g". The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
By the way, my iPhone does connect wirelessly to my network at home. This difficulty is at a second home.
Any other thoughts would be appreciated.

The update of web page iCloud is great, but why don't u just remove the "Notes" label from the "Mail" app?

The update of web page iCloud is great, but why don't u just remove the "Notes" label from the "Mail" app?
In additional, I also would like to see a "iOS liked" way to edit my "United contact" on the web page iCloud, just like on my iphone. That would be really great and more greater!
Anyway, thanks for your work!

frederickfromacworth wrote:
but the updated icons on the update page don't go away.
It's difficult to tell exactly what you mean, or where you are looking.
But if you're looking in the App Store on the iPad, in the Updates area, and you still see the icons, they presumably now say "Open" to the right instead of "Update". They will stay that way as a history of what you have done. They will disappear after a while - something like 30 days. That is fine.

Web pages won't load but airport shows strong connection!

help!
I have a wireless network set up with a wireless router transmitter (not apple). My wife's macbook works fine, but my son's imac has great difficulty loading pages even thought the airport icon at the top of the monitor says the signal is strong and internet connect says the status is connected. Web pages sometimes load fine, but about 80% of the time now, I get "safari can't find the server" or "firefox can't load the page" messages instead of a webpage (like apple or google). I don't even know where to start when trying to troubleshoot this problem. If anyone can steer my to a starting point to figure out this problem (or tell me how to fix it), I'd be extremely grateful! thanks!

Welcome to the discussions!
Try a few simple experiments to check your signal strength.
On your wife's MacBook, hold down the option key and click on the fan shaped Airport icon at the top of the screen. Look for the Transmit Rate. Note this number.
Now do the same thing for the iMac. You will probably see a much lower number indicating that the iMac is not receiving a strong signal due to walls, construction materials and other interference. In this case, the only real solution will be to find a different position for either the wireless router or the iMac.
Another option might be to see if your wireless router signal can be extended. In almost all cases, you will need to look for a device that is from the same manufacturer as your router.
Post back on your progress.

I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING" I have no idea what to do????

I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING" I have no idea what to do???? Any Suggestions?

This is to do with the .htaccess file on your server.
You either need to deal with this and open it with an html editor or change your web host.
Do a search of this forum and there are plenty of posts that relate to parse error and .htaccess pages. Have a look on the right hand side of this post and you will see similar ones like yours.

I exported a pages document to word, but was not able to edit the new word document.

i exported a pages document to word, but was not able to edit the new word document.

I have a OSX IMAC Version 10.8.5. I got pages at the same time I purchased this computer. I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked. I notice the document says PDF. How do I correct this? Seems like I've tried everything. If you can help, that would be great!

MY WEB PAGE IS DIMLY LIT AND DOES NOT SCROLL

THE WEB PAGE IS DIMLY LIT AND DOES NOT SCROLL

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third thing to then try is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
And there is no need to SHOUT

Web pages start to load but blue address bar freezes.

Web pages start to load but blue address bar freezes about a third of the way across
Sometimes the page loads sometimes I will have to refresh the page. Once refreshed the page loads very quickly.
Any solutions welcome it's driving me mad!

Okay, a guess...
The page only contains some JavaScript.
I don't think the page is meant for people to view - here's the code from the page...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>FOXNews.com</title>
<script language="JavaScript">if(typeof(parent.prInst)=='undefined'){var prInst=1}else{prInst=parent.prInst+1} for(i=0;i<parent.frames.length;i+){if(parent.frames.title=='prif'){prInst+}}this.title='prif';var prs="http://ads.PointRoll.com/PRServe/?pos=s&num="prInst+"&"location.search.substring(1)"&r="+Math.random();document.write('<scr''ipt language="JavaScript" src="'prs+'"></scr''ipt>');</script>
</head>
<body>
</body>
</html>
Tom

TS3992 i have the message that the ipad has not been backed up successfully in 2 weeks, but can not get past the message to use the Ipad

I am trying to unlock my ipad with the message that the ipad has not been backed up successfully in 2 weeks, but can not get past this screen. I have plugged it in, it is connected to the internet, but will not back up or do anything else. What can I do?

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts, so you will be able to use your iPad

I have a 3G Ipod, for the longest time I have not been able to connect to the apple server. I am able to connect to wifi, grouse web pages however canot conncet to iTunes. I have rebooted, any every other thing I can think off.

I have a 3G Ipod, for the longest time I have not been able to connect to the apple server. I am able to connect to wifi, grouse web pages however canot conncet to iTunes. I have rebooted, any every other thing I can think off.

Can't connect to the iTunes Store
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Derpciation posted but sm35 not showing the batch

Hi Gurus ,
I have a stiuation where I have posted depreciaiton using AFAB and AW01N is showing me depreciatiion for July posted but there is no GL document posted . SM37 says job has finished but sm35 not showing batch under my login id, how can I post the derpeciation if I am not able to see my batch in sm35. Can some1 please guide me.
I would really appreciate If someone can pleaseguide me
Thanks

hi,
According to your question, dep was posted in assets on seeing the asset explorer.
So it should show in AFBP.
If not, dep was not posted.
Please do AFAB again in test run mode and go to menu item->go to -> error log
And check which error is coming.
Again check the account determination for that company code. asset class in AO90.
In that config there must be a min of 3 GL accounts were assigned to them.
1) APC VAlues A/c 2) Accum Dep 3) Expense account for dep posting
Before doing these changes please make sure that you are doing the changes to the correct COD.
So use Tcode OAPL before going with AO90.
This might help
Thanks,
Srinu

Podcasts and movies are synced to my iphone but do not show up in menus

Since upgrading to 5.1.1, I've noticed that movies and podcasts sync to my iphone, but do not show up in the corresponding menus. I can search for the movies and podcasts and then play them, but when I navigate to the podcast page, it shows none on the iphone. Same with movies...only the TV episodes show up.
I have tried restoring to factory settings, and that temporarily fixed the problem, but subsequent syncs seem to have undone whatever was fixed.

Since no one here can possibly know what you specifically mean by "tried everything that other people are saying", no one can determine what you did wrong. Also, you didn't say what computer OS you use.
Read and follow ALL recomendations in the following aritcle appropriat for your computer:
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

HT2736 Someone sent me an electronic gift card, but its not showing up on my iTunes account.

Someone sent me an electronic gift card, but its not showing up on my iTunes account.

You've checked the spam folder on your account as well as the inbox, and you don't have any filters/rules on your email account that might be deleting the email ?
The sender could try contacting iTunes Support and see if they can help with why it's not being received : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

USB Drives works, but does not show up in "Safely Remove Hardware"

USB Drives works, but does not show up in "Safely Remove Hardware"
windows 8
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank you

Hello Mickey2003
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Web page posted 2 weeks but is not showing up in Google or other search eng

Similar Messages

Maybe you are looking for