Web Report Viewer error - Unable to load client print control.
Dear All,
We have a problem with Report Viewer print funtionality. Getting the error "Unable to load client print control." on click of Print button.
We tried all solutions posted in web - nothing resolves the issue.
The print works fine when we open the report via a browser. But the same is not working through our application. We have the application installed on the Report server itself and the user has Admin previleges.
Please find below the details
Report control: ReportViewerWebControl.axd
Version: 9.0.30729.4402
SQL server version: SQL Server 2008 R2, 10.50.2500.0 (running on Windows Server 2008 R2 - 64 bit)
Your help on this would be highly appreciated. Please let me know if you need any specific information.
Thanks,
Naga
Nagaraja
Hi, Larry,
Thank you for your answer which remind me and lead me to the resolution. I have struggling on this SQL Server Report Server 2012/Client printing control for
2 days.
I just cannot figure out why it kept prompting non-admin XenApp users for SSRS installation. Thanks for your notes again.
I have 2008 R2 server setup as XenApp server for the publish apps. We published the IE to user to access Web application with SQL 2012 reporting service in
the backend.
In the control environment, users do not have permission to install any software. This SSRS has to be installed as administrator under “Install mode” in XenApp
server.
Yes, 32bit IE works for me but 64bit IE works too.
You just need to ensure which version of IE you’re using to install the SSRS. I’m not aware of using 32bit IE for SSRS installation in server but publish 64bit
IE to client. That’s my mistake.
Thanks again.
JohnnyW2012
Similar Messages
-
Unable to load Client print control
I know this question has been asked and I have read all of the responses. But, I seem to have a unique problem.
I am using Server 2008 r2 sp2 with ie8. And my problem is getting the error Unable to Load Client Print Control on the client machine for reporting services.
The standard answer here is that the RSClientPrint.cab needs to be loaded on the client machine and installed with a click of the print icon with admin rights. I have done that as a administrator and the print icon works fine as an adminstrator.
However, when I log as a non-admin user, that is when I get the error. The rsclientprint.dll shows up in the registry, but it just does not work for a non-admin user.
I have a open ticket with a MSDN tech at Microsoft, but he seems to be at a loss and is not trying very many things that lead me to believe that this can be resolved.
I am wondering if some else out here has had this problem and got it to work.
Thanks for any help.Hi KeithTexas,
It seems that the non-Administrator users don't have sufficient permissions on the “Downloaded Program Files” folder where the RSClientPrint control is stored. So, please grant to the user:
1.Open C:\Windows, right-click on the “Downloaded Program Files” folder and click “Properties”.
2.Switch to the “Security” tab, click “Edit”.
3.In the “Security” window, click “Add” and add the specific user to the list.
4.Check the “Allow” box for “Read & execute” permission and click “OK”.
Regards,
Mike Yin
TechNet Community Support -
Report Viewer WebPart for Sharepoint - Printing (Unable to load client print control)
Hi there,
I am running a report via the report viewer web part on a SharePoint page. The report itself is working great. But when I attempt to print it, I get a prompt to install something....and then it is followed up with "Unable to load client
print control".
There are some posts out there about updating the a certain CU or to find the RSClientPrint cab and unloading the dlls into the system32 folder and registering it. I've tried that but no go.
Anyone else encounter this issue? If so, potential solutions?
SP 2010 - 14.0.7221.5000
SQL Server 2008 R2 (Reporting Server)- 10.50.1617 (have tried updating to 10.50.6000.34)
IE = 10.0.9200
And yes, I am running as local admin....so there shouldn't be any issue installing the active x component on IE.
Thanks in advance,
EricHi Eric,
According to your description, you can't load the print button in your sharepoint site. Right?
In Reporting Services, Each user who wants to use the print feature must download and install the ActiveX control that provides client print functionality. The first time a user clicks the
Printer icon on the report toolbar, the Microsoft ActiveX control is downloaded to the computer. After the control is downloaded, the
Print dialog box displays whenever the user clicks the Printer icon.
So in this scenario, please enable the setting Download signed
ActiveX controls in Internet Explorer and download it. Please follow the steps below:
Click Tools -> Internet options.
Switch to the Security tab, select the Trusted sites zone, and then click
Sites.
Type the URL of the SQL reporting server, click Add, and then click Close.
Click the Custom level button, scroll to the ActiveX controls and plug-ins
node.
Click Enable for Download signed ActiveX controls, and then click OK.
Then we need to have the
EnableClientPrinting is set to true.
In SharePoint Central Administration, click Application Management.
Click Manage service applications.
Click the name of your Reporting Services service application, and then click
Manage in the SharePoint ribbon.
Click System Settings.
Select Enable Client Printing. The Enable Client Printing option is near the bottom of the page.
Click OK.
Reference:
Enable and Disable Client-Side Printing for Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Blank second page and export error in Crystal 10 Web Report Viewer
We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer. When they view a report that is 12 pages, the first page appears OK. When they click Next to go to the Next page, the page shows as blank. The second issue is that If they try to export the .rpt they get this error:
Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack trace:
[COMException (0x80000220): Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
[LoadSaveReportException: Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
I can view and export the same .rpt file in my environment without any issues. Has anyone seen these errors before and have any ideas on how to resolve them? They seem to be environment related since I can view the same report OK on my machine.
This is using Crystal 10 on Windows Server 2003.Hello,
This sounds like a postback issue. Does your application handle postback by putting the report in session?
There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
The basic code is:
Private crReportDocument As ReportDocument
Private Sub ConfigureCrystalReports()
'Check to see if the report exists
If (Session("crReportDocument") Is Nothing) Then
crReportDocument = New ReportDocument()
crReportDocument.Load("C:\1 - Report\CRParams.rpt")
'Do anything required for the report
'Logon to the database
'Pass parameters
'Assign the report into Session
Session("crReportDocument") = crReportDocument
'Assign the report to the Viewer
myCrystalReportViewer.ReportSource = crReportDocument
Else
'Assign the report that is stored in Session to the report instance.
crReportDocument = CType(Session("crReportDocument"), ReportDocument)
'Assign the report to the Viewer for each postback
myCrystalReportViewer.ReportSource = crReportDocument
End If
End Sub
Elaine -
Error "Unable to Load URL" in Dashboard Design 4.1 SP2 while create web service connection
Hello Experts,
I am using SAP BO Dashboard Design 4.1 SP2.
I have create one web Intelligence report and from it i create web services url using of publish data feature.
when I use this url to create Web service(Qaaws) connection in dashboard It is showing me error " Unable to Load URL "
URL is working fine in browser in server system where i install SAP BO 4.2 but it is not working in my system where i installed dashboard design.
Please suggest how do i make connection using of this URL in dashboard.
Do i miss something or doing wrong ? then guide me.
Thanks and Regards,
Dhaval DaveHi Dave,
Please check the below link,
How to create Xcelsius Dashboard based of BI Web Service ( BIWS )
Using Webservice in Dashboard
Webservices in Dashboard - Issue
Also change your original link here and try to load
(sample link)
From:
http://BOE:8080/dswsbobje/qaawsservice/bisw?def=1&cuid=xxxxxxxxxx
To:
http://BOE:8080/dswsbobje/qaawsservice/bisw?wsdl=1&cuid=xxxxxxxxxx
or else can you post your url here.
Hope this helps.
--SumanT -
The Crystal Report Viewer is unable to create its resource objects
Recently our Clients have updated to Windows 7 and IE8. we are having issues to view the Reports in Infoview.
The web server operating server is Windows 2003, Crystal Reports XI Release 2 and BOE R2 SP2 is installed in it. Activex Viewer is downloading fine in client machine having Windows XP OS (IE Version is 7) but for the same url ActiveXViewer.cab is not getting downloaded in Windows 7 Enterprise (IE Version is 8). It throws the error u201CThe Crystal Report Viewer is unable to create its resource objects.u201D
Does BOE R2 SP2 support on IE8?
ThanksTested Windows 7 And IE8 browser to view Reports in Infoview for different user preference setting.
1. Active X Viewer u2013 Fails to open in View Mode and errors out with message as u201CThe Crystal Report Viewer is unable to create its resource objectsu201D
2. DHTML Viewer u2013 Could able to open/export/print the Report.
3. Advance DHTML Viewer - Could able to open/export/print the Report .
4. Java Viewer u2013 Could able to open/export/print the Report, but noticed the fonts are overlapping. -
Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Crystal Report Viewer is unable to create its resource objects"
I'm using Crystal Reports Server XI and getting the error/pop up box: "Crystal Report Viewer is unable to create its resource objects" when trying to view a report through the website.
Any suggestions would be appreiciated. I'm very unfamiliar with Crystal Reports but it's fallen into my lap to install and suppor this application.
I have tried changing some browser settings to allow ActiveX content and such but that hasn't seemed to help. I also tried downloading a particular 3 .dll's files to my desktop and registering them, as well as re-registering them on the server. They were CRVIEWER.dll, swebrs.dll, sviewhlp.dll.
I'm using IE 7.0 and CR Server XI is installed in a Windows 2003 R2 SE server. IIS seems to be setup OK. I haven't changed any of the default installation settings that were configured during the installation on the virtual directory that was created. I received no errors during the installation. I'm also not seeing anything obvious pop up in the event logs. I still have yet to do a log parser query looking for anything that says crystal reports.
Thanks!
Edited by: Wendy Beatty on Sep 23, 2008 9:50 PMHi Wendy,
This issue might be better addressed by our .NET development forum, however, some of the things that come to mind are:
1. As a test are you able download the Active X Viewer from the client machine by accessing it via a URL:
http:// <yourserver>/crystalreportviewers/ActiveXControls/ActiveXViewer.cab
Does it prompt you do download the .CAB file?
2. If you have more than one version of the Active X Viewer installed on the client machine, go through this SAP Note (1215398) from the Service Market Place to remove it.
3. Check your browser settings (Tools|Security|Custom Level) to make sure Active Controls are set to at least prompt.
4. Confirm with your network administrator if there are group policies that restrict the installation of Active X Controls or if users do not have the rights to install.
Regards,
Wallie -
Running Extension Points sample Helloworld gives Error: unable to load...
Hi....
It looks like I don't have cez_inproc in my library path? I am just wondering is there anything I am missing? I followed all the directions correctly as mentioned in the webi extension doc.
Thanks,
-gandhams
java.lang.UnsatisfiedLinkError: no cdz_inproc in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.businessobjects.cdz_inproc.client.JniFacade.<clinit>(Unknown Source)
at com.businessobjects.cdz_inproc.client.CollocatedContainer.init(Unknown Source)
at com.businessobjects.cdz_inproc.client.CollocatedContainer.init(Unknown Source)
at com.businessobjects.webi.richclient.ConnectionAdapter.initContainer(Unknown Source)
at com.businessobjects.webi.richclient.ConnectionAdapter.<init>(Unknown Source)
at com.businessobjects.webi.richclient.Startup.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.businessobjects.webi.richclient.SplashWindow.invokeMain(Unknown Source)
at com.businessobjects.webi.richclient.Main.main(Unknown Source)
ERROR : unable to load the cdz_inproc library
com.businessobjects.cdz_inproc.client.ContainerException: stopContainer failed : java.lang.UnsatisfiedLinkError: com.businessobjects.cdz_inproc.client.JniFacade.stopContainer(Lcom/businessobjects/cdz_inproc/client/InvocationStatus;)V
at com.businessobjects.cdz_inproc.client.CollocatedContainer.stop(Unknown Source)
at com.businessobjects.webi.richclient.ConnectionAdapter.die(Unknown Source)
at com.businessobjects.webi.richclient.Startup.main(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.businessobjects.webi.richclient.SplashWindow.invokeMain(Unknown Source)
at com.businessobjects.webi.richclient.Main.main(Unknown Source)Srinivas,
I am getting the same error message with "cdz_inproc".
Can you please let me know what was the "classpath" when you were getting that error and what did you change it to later to resolve the issue?
Thanks
Krishna. -
JavaFX application deployment problem - Error: Unable to load resource
I am developing my first JavaFX application. When I install the jnlp and jar files on my web server I have no problems using the application from either my development machine (Windows XP) or my test machines (Windows XP & Mac OS X). However, one person evaluating the application reports getting the following error:
Error: Unable to load resource: http://dl.javafx.com/1.3/javafx-rt-windows-i586__V1.3.0_b412.jar
What are the possible causes of this problem and how can they be resolved?If being able to redistribute the JavaFX runtime is important to you, make sure you let Oracle know. Personally I'd prefer to host it myself or bundle it with an application installer. Being forced to rely on dl.javafx.com isn't acceptable for me.
[http://javafx.uservoice.com/forums/33584-official-javafx-feedback-forum/suggestions/403105-allow-us-to-distribute-the-javafx-runtime-binary?ref=title]
Edited by: jptech on Jun 18, 2010 8:36 PM -
Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XPUse these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/ -
Microsoft Visual Basic 2010 Express.
I am new to Visual Basic programing and i am trying to understand the relationships between Datasets, database, table Adaptors. I have to following code that is is giving me the following error" Unable to load, Update requires a valid DeleteCommand
when passed DataRow collection with deleted rows".
I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
It seems that i can delete the data on the DataGridView Table and it only displays the correct data. but my database is not updating, even though the data grid displays differently.I can determine this because, when i save the offset database, i have all
the previous uploads and all the rows that i wanted to delete are still there.
My final goal is to be able to import offset data from a CSV file, save this data on the pc, send a copy of this data to a NuermicUpDown so the customer can modify certain numbers. From here they download all the date to a controller. IF the customer
needs to modify the imported data, they can go to a tab with a data grid view and modify the table. They will also have to option to save the modified data into a csv file.
Im not sure if i am making this overcomplicated or if there is a easier way to program this.
CODE:
Private Function LoadOffSetData()
Dim LoadOffsetDialog As New OpenFileDialog 'create a new open file dialog and setup its parameters
LoadOffsetDialog.DefaultExt = "csv"
LoadOffsetDialog.Filter = "csv|*.csv"
LoadOffsetDialog.Title = "Load Offset Data"
LoadOffsetDialog.FileName = "RollCoaterOffset.csv"
If LoadOffsetDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then 'show the dialog and if the result is ok then
Try
Dim myStream As New System.IO.StreamReader(LoadOffsetDialog.OpenFile) 'try to open the file with a stream reader
If (myStream IsNot Nothing) Then 'if the file is valid
For Each oldRow As MaterionOffsetDataSet.OffsetTableRow In MaterionOffsetDataSet.OffsetTable.Rows
oldRow.Delete()
'delete all of the existing rows
Next
'OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
Dim rowvalue As String
Dim cellvalue(25) As String
'Reading CSV file content
While myStream.Peek() <> -1
Dim NRow As MaterionOffsetDataSet.OffsetTableRow
rowvalue = myStream.ReadLine()
cellvalue = rowvalue.Split(","c) 'check what is ur separator
NRow = MaterionOffsetDataSet.OffsetTable.Rows.Add(cellvalue)
Me.OffsetTableTableAdapter.Update(NRow)
End While
Me.OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
MainOffset.Value = OffsetTableTableAdapter.MainOffsetValue 'saves all the table offsets
to the offset numericUpDown registers in the main window
StationOffset01.Value = OffsetTableTableAdapter.Station01Value
StationOffset02.Value = OffsetTableTableAdapter.Station02Value
myStream.Close() 'close the stream
Return True
Else 'if we were not able to open the file then
MsgBox("Unable to load, check file name and location") 'let the operator know that the file wasn't able to open
Return False
End If
Catch ex As Exception
MsgBox("Unable to load, " + ex.Message)
Return False
End Try
Else
Return False
End If
End FunctionHello SaulMTZ,
>>I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
This error usually shows that you do not initialize the
DeleteCommand object, you could check this
article to see if you get a workaround.
>> Im not sure if i am making this overcomplicated or if there is a easier way to program this.
If you are working CSV file, you could use OleDB to read it which would treat the CSV file as a Table:
http://www.codeproject.com/Articles/27802/Using-OleDb-to-Import-Text-Files-tab-CSV-custom
which seems to be easier (in my opinion).
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
AE Effects Error Unable to load plugin
Hi,
Can anybody help with the following error - AE Effects Error, Unable to load "Misfire Vignette, Bundle"
Verify filter parameters. I have a project sent to me and we both have FCP7. I can see in my application support folder that the plugins for misfire are grey scaled but they don't activate when unlocked. Can i install from somewhere or is there any easy solution here??
Appreciate any help out there, thanks PaulHi Paul,
if all you need is a vignette, which you can customize in many ways and you prefer to stick with FCP there are many free options and plugins that are designed for such purpose or can be used for creating a vignette.
Photoshop if you have it, [Andy Mees's RB|http://web.me.com/andymees/Freeand_Easy/main/Entries/2008/3/19_Andy%E2%80%99s_Region_Blur3.html], [Mine|http://www.videonline.co.uk/LucasVignetteCombo.htm], [Alex4D's|http://alex4d.wordpress.com/2009/01/05/final-cut-free-vignette-filter > there re even more out there.
Most offer more controls than the FCP standard vignette.
Luca
|
|
“I may receive some form of compensation, financial or otherwise, from my recommendation or link.” -
Error: Unable to Load Database
Anyone seen this error: "Unable to Load Database"? How to recover? A link or a page for me to read would work too. thx! James
The usual cause for this is that the database has become corrupted - or one or more key files was somehow deleted. Take a look at the application log and see if there is a more detailed message. Unfortunately, if the data has been corrupted, you will have to recover from backup, or rebuild your cube.To get the database started, you can go into the database directory and delete the *.ind, *.pag, *.tct, *.ind and *.esm files. This will allow the app to start, but the data will be GONE - you will HAVE to reload and calc it, or restore from backup.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
-
Flex Builder 3 Error: Unable to load SWC
Hi,
I am trying to use the YahooMaps component (YahooMaps.swc) in
my application. I have included it in the build path of my
application.
Steps followed:
1. Right-click on the project and choose Properties or open
the Project menu and choose Properties.
2. In the project properties dialog, choose Flex Build Path.
3. Select the Library path tab, and press the Add SWC...
button.
4. Selected the YahooMap.swc
I still get "Unable to load SWC: YahooMap.swc". It is an AS
3.0 component. Any help will be appreciated.
Thanks
SumitHi Peter,
Thank you for your reply.
I have followed the documentation on the site you provided.
All I have done so far is:
1. Create a new flex project in Flex Builder 3
2. Once the project is created, I try to add the YahooMap.swc
to my Flex build path.
3. Once I add the YahooMap.swc, it fails with the error
"Unable to load YahooMap.swc" in Flex Builder 3.
4. FB3 does not recognize YahooMap when I try to import it in
AS3.
import com.yahoo.maps.api.YahooMap;
I am not sure what I am doing wrong. Does it have to do
something with the version Y! has used to build the YahooMap.swc
and Flex Builder 3?
Thanks
Sumit
Maybe you are looking for
-
Disable access to the cloud storage feature for Creative Cloud for Teams?
Is it possible to disable access to Creative Cloud Files when using Creative Cloud software for Teams/Volume Licensing customers? We're considering moving to Creative Cloud subscriptsions instead of traditional licensing and the ability to turn this
-
Record does not "check in" after workflow is complete
Hi All, I have built a very simple workflow as below 1. start step 2. process step 3. approve step 4. stop step in the fourth step that is the stop step i have selected "check in" so that the record automatically check's in after the process is compl
-
Dear All, What is Lot size procedure and how it will affect during MRP run? Please provide some example against explanation.
-
PR Creation at Inspection lot creation
Dear QM Experts can we generate Purchase requisition with the creation of Inspection lot, Automatically. in my case there are some inspection operation performed by external agency for which he charge some amount for services. for this i created a co
-
MMS.CFG getting reset when contacting Adobe for updates
Hello! I noticed two days ago that many users were getting prompts for updates. I had deployed Flash 11.8 in July with the following MMS.CFG settingS: AutoUpdateDisable=0 AutoUpdateInterval=1 SilentAutoUpdateEnable=1 Today I noticed the most users MM