Web Self Service 2.1.0 configuration in CC&B

Dear all,
I'm trying to configure Web Self Service 2.1 for CC&B 2.1.0 and I have followed the steps provided in the installation document. I got the login page.
When I try to register an user I get the following error:
"Unable to load request schema. java.io.FileNotFoundException: /u01/spl/PRODTEST/SSvcPersonSearchByID.xsd (No such file or directory)"
The above xsd file is available in the directory /u01/spl/PRODTEST/splapp/xai/schema.
Is there any configuration which need to be updated to pick the correct path for the schema files?
Thanks and Regards,
Srividhya

Is the SelfService application installed under +/u01/spl/PRODTEST+ ? If yes, can you try installing it under $SPLEBASE/splapp folder , i.e. +/u01/spl/PRODTEST/splapp+
Default 'Schema Directory' location is configured under XAI Options, default value is 'file:///@SPLEBASE@/splapp/xai/schemas/', which in your case would be +/u01/spl/PRODTEST/splapp/xai/schemas/+

Similar Messages

  • Web Self Service - CC&B 2.2.0 - Tomcat - Demo on Laptop

    I'm trying to install Web Self Service with CC&B V2.2.0 on a laptop for a DEMO.
    The problem I get to is when I try to register a user or I click on Forgot your password link, or when I input rubbish user id and password in the login page. What happens is I receive an error of 401 from the XAI server. I followed the installation procedure inside the installation document from cc&B 2.1.0 to configure tomcat.
    The error I get is: Server returned HTTP response code: 401 for url http://localhost:6500/XAIApp/xaiserver

    clarkd wrote:
    I am trying to do the same thing, and I can't get to the page. However, after experimenting I noticed a few interesting things. In general I am installing the same config (Tomcat 6.0.13 and CC&amp;B 2.2 on a laptop with the demo data). Now I can access cis.jsp (localhost:6500\cis.jsp) no problem, but once I install WSS I can't access the WSS app (<A class=jive-link-external href="http://localhost:6500/SelfService">http://localhost:6500/SelfService</A>). However, since this is 6.0 so there is no admin feature I have been playing around by moving war files around and etc to try to get this to work (I believe the admin functionality was discontinued with tomcat 5.5). I even installed probe and played with JMX/jconsole to see if I could get WSS to work, but nothing worked or at least made any kind of change.
    Eventually, I figured out that I could get to the <A class=jive-link-external href="http://localhost:6500/SelfService/SSvcLogIn.jsp">http://localhost:6500/SelfService/SSvcLogIn.jsp</A> page but it doesn't work. If i try to log ( I am trying the SYSUSER/sysuser00 login) in I get "HTTP Status 404 - /SelfService/SSvcLogIn.jsp". Interestingly if I put in a bogus username and password it actually rejects me, so that tells me that there is some connectivity going on. Anyway, after playing around I decided to install another version of tomcat (using the <font face="tahoma,verdana,sans-serif" size="1" color="#000">windows</font> installer v. 6.0.20), and then I moved the SelfService.war file into webapps directory, and then tried this other server which was on a different port. This time I actually got images and etc (for some reason the images weren't working on port 6500). Unfortunately when I tried to log in I got the same error as the original post on this thread.
    If anyone has any suggestions please let me know. Otherwise I am going to try to do this install but with Weblogic since there are better instructions for that app server.It's good for reference, It is just the solution for my problem, Thanks for your analysis!

  • Attempting to Create Payment using CC&B XAI from CC&B Web Self Service

    We tested same from XAI Submission. There also it asks for authentication, used u=SYSUSER and p=sysuser00 (as configured in CC&B,it is default configuration) and it created payment event successfully in CC&B. Now we are trying to create payment event from CC&B Web Self Service, we are stuck in the authentication part, hopefully we will resolve it very soon. Manas Barua

    Hi Ruud,
    Thanks for replying, I'm using SOAP UI ver 4.0.0. for my trial.
    Now i'm able to run my script by adding <wsse:Security> in my script and authentification error response not appear any more.
    But i have another problem, when my script executed using SOAP UI it always makes the SOAP UI hang and if im execute using
    XAI submission it will successfull creating payment for the first time but for the next trial it will makes my browser hang.. :(
    Did my problem happened to your environment too? or is there any patch that i can use to resolve my problem?
    Thank you Ruud.
    Regards,
    Hadi Wijaya

  • Good Model for Web Self-service User registration ?

    Trying to build a web self-service user registration module.
    9iAS documentation says 9iAS uses JAZNUserManager that uses jazn-data.xml.
    I like jazn-data.xml because the password is encrypted and works with j_security_check with minimal coding, just need to make entries in web.xml.
    Is this a good model, ie storing web users in jazn-data.xml ?
    Thanks in advance

    You should have a kind of auto-enrollment feature on Sharepoint side where, based on a menu selection, the user will be able to enroll himself and his account will be moved to an OU or added to groups based on the provided details. The problem with this
    is that this is usually the source of duplicated user accounts in AD and it is not easy to apply a kind of control on how users should enroll themselves only one time and also hard to manage and cleanup later.
    You can ask them in Sharepoint forums for more details:
    http://social.technet.microsoft.com/Forums/en-US/category/sharepoint
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Web Self Service integration

    Hello,
    I'm new with SOAP and WSDL and I have to create a web Self Service for Our Company, I choose PHP as DL, So could You give me a general view of the Web Self Service integration and i will be grateful if you post some documentation and Samples Code.
    Also, the web Self Service user's are the contacts of the registered Company in the CRM, So How Can Get a Session ID for that.
    I know that my question may be evident for some of you but i got to say ''a trip of a thousand miles starts with one step'
    Thank You For your Help
    H.M

    Hi HM,
    There is no concept called Web Self service in Siebel On Demand. Siebel On deman provides Web Service Interface. Getting sessionid sample code is available in Web Service integrating guide.
    Raja Kumar Malla
    [email protected]

  • What is oracle Web self service ?

    What is oracle Web self service?
    what is the diffrence between Orcle Web portal and oracle Web self service?
    what are the funcationalities of oracle Web self service?
    What are the pre requisites of oracle Web self service?

    No body know about it? or dono wanna reply. ........
    Can anybody explain please.

  • How to configure sync rules involving a CSV file and portal self service

    Hello,
     I need to configure some FIM sync rules for the following scenario:
     User account details are entered from a HR CSV file and exported to AD  Users have the ability to modify their own AD attributes in the
    FIM portal (there is not a requirement for them to view their  HR CSV data in the portal). The FIM portal modifications will be exported to AD as expected.  
    My setup is as follows:
    CSV file - name, last name, employee ID, address.
    CSV MA - has direct attribute flows configured in the MA between the data source and MV Portal self service attributes –      
    users can edit mobile, display name and photo
    I've also set the CSV MA as precedent for the attributes
    FIM MA – attribute flows defined for MV to Data Source as usual (i.e. firstname to firstname, accountname to accountname, etc).
    AD MA – no attribute flows defined as inbound and outbound sync rules have been configured in the portal using the Set\MPR\Triple.
    I’m thinking of using the following run profiles:
    CSV MA – full import and delta sync (imports HR data)
    FIM MA –  export and delta import (imports portal changes)
    FIM MA – delta sync (syncs any portal changes)
    AD MA – export and delta import
    If my understanding is correct this should sync HR data from CSV to AD, as well as user attribute self service updates from the portal to AD.
    If I wanted to just do a HR CSV sync could I get away with just steps 1 & 4 ? (presumably not as my rules are in the FIM portal?)
    If I wanted to do just a portal sync, could I get away steps 2-4?
    Any advice on how to improve my setup is much appreciated - cheers
    IT Support/Everything

    The truth is that your design should be done in the way that it doesn't matter which profiles in which order you will execute. At the end, if you will run all import, synch and export profiles on each data source you should get same result. This is beauty
    of synch engine here.
    Your steps from 1-4 will synch data to your data sources and at the end will give you expected result. But not because of the order you are executing them but because of correct attribute flows. If flows from CSV file and from FIM portal might be done for
    the same attributes you need to think also about attribute precedence.   
    Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

  • Student self services - configuration guide or cook book

    Dear All,
    We have recently upgraded to EHP4 and enabled student self services.
    But when I changed my program of study no workflow is triggered in the backend.
    Do I need to do any configuration for this ?
    Is there any configuration guide or cook book available for student self services.
    Thanks in Advance,
    Best Regards,
    Aleem Mohiuddin.

    Hi Aleem,
    You can find cookbooks for configuring SLcM on the following page: Student Lifecycle Management [original link is broken]
    For the 'Change of Program' functionality you need to configure the following workflow to your customer need: COP_APPROVAL (WS template: 29800011 via trx PFWS).
    Please also make sure you have applied note 1321998.
    Best regards,
    Rob

  • Error "web service destination is not configured" in CTS+

    Hi experts,
    during deployment with CTS+ I get the error "web service destination is not configured" (see below). In fact there is a web service to be deployed and a WebDynpro-DC using this web service as adaptive web service model. The model uses the destination DACC_PI_WS_METADATA_DEST and DACC_PI_WS_EXECUTION_DEST. I configured both destinations in the server with type "WSDL".
    Any idea what goes wrong?
    Regards,
    Christoph
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP189 DEPLOYMENT
    1 ETP101 transport order     : "JADK900006"
    1 ETP102 system              : "JAQ"
    1 ETP199X######################################
    1 ETP189 DEPLOYMENT
    1 ETP101 transport order     : "JADK900006"
    1 ETP102 system              : "JAQ"
    1 ETP108 tp path             : "tp"
    1 ETP109 version and release : "372.04.29" "700"
    1 ETP198
    2 EPU601X"CTS Deploy Service - Version 0.92" "06.03.2007" " " " "
    2 EPU602 "==================================================""======================"" "" "
    ===="" "" "
    2 EPU601 "Deploy web service destination =" " " " " " "
    2 EPU601 "Directory =" "/usr/sap/trans/data" " " " "
    2 EPU601 "SDM Deploy URL =" " " " " " "
    2 EPU601 "SLD Deploy URL =" " " " " " "
    2 EPU601 "XI Deploy URL =" " " " " " "
    4 EPU607 Non-ABAP system "JAQ" (communication system "KSM")
    4 EPU601X"Deploy for" "SDM" " " " "
    4 EPU601 "Deploy File =" "karmann.comSC_DACCDIP_DACCD_C~20081001122205.sca" " " " "
    4WEPU601 "Web service destination is not configured" " " ", deployment skipped" " "
    4WEPU601 "Return Code =" "4" " " " "
    4WEPU601 "Highest Return Code =" "4" " " " "

    Hello,
    I am getting an identical error per below. I have checked Web deploy service, CTSDEPLOY setup in SM59 etc and looks OK, yet the issue still occurs:
       Deployment
       Transport request   : BWDK903389
       System              : BWQ
       tp path             : tp
       Version and release: 372.04.36 700
       CTS Deploy Service - Version 0.92 06.03.2007
       ========================================================================
       Deploy web service destination =
       Directory =
       SDM Deploy URL =
       SLD Deploy URL =
       XI Deploy URL =
       Double-stack system BWQ
       Deploy for SDM
       Deploy File = CTSTEST_20081008_123719.epa
       Web service destination is not configured   , deployment skipped
       Return Code = 4
       Highest Return Code = 4
       Deployment
       End date and time : 20081015162015
       Ended with return code:  ===> 4 <===
    Anyone have any ideas on this one?
    Thanks & Regards,
    Michael

  • Self service procurement: Configuration guide. Release 500

    Hello,
    can somebody please mail me the "Self service procurement: Configuration guide. Release 500" to [email protected]
    Can somebody tell me how to get it out of the solution manager?
    Thankx a lot in advance
    regards
    stefan

    Hi Dinesh
    Could you please send me the Self service procurement - configuration guide. We also plan to explode this option, but do not know where to start.
    Please send me the doc to [email protected]
    Thanks in advance
    Raj

  • Self Service Web Applications

    Hi,
    In Fusion APplications, we dont find Forms based Applications...only Self Service Web Applications...i have read some where about this....
    Forms ----> Jdeveloper
    Reports ---> XML Publishser
    what does it mean...Self Service...any meaning for that...

    Check the following thread, it may be helpful:
    Self-Service and Forms
    Re: self service and Forms

  • Is it possible to call a web service via UWL XML configuration?

    Hello
    Is it possible to call a web service via UWL XML configuration?
    If yes then an example would be great.
    Roy

    Hi Roy,
    Yes, yes it is possible.
    Yesterday only I came across the following document which will answer your questions:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6?overridelayout=t…
    ~Ashvin

  • User setting ( self services from web )

    Hi All,
    Please help me to get some tables or function modules where the user phone fax nou2019s will store when user update these from user setting ( self services from web ) using transaction BBPUM02?
    Thanks in advance

    Hi,
    Try the table view V_ADDR_USR and table ADRC .
    BR,
    Deepti.

  • About tools in self-service web development

    hi all
    we want to use pure plsql in our customization development,but wen can not find a high efficiency way,can any body recommend a good tool?
    And how r self-service web applications developed?
    thx:)

    Self Service applications are developed based on the Oracle Framework withe JDeveloper.
    Srini C

  • Building blocks or config guides for configuring self service procurement -

    hello all,
    can some one send me/point me in a direction where i can get some documents to configure self-service procurement and service procurement scenario for a classic scenario? we are using SRM 5.5 and 1 OLTP system: ECC 6.0
    will award points immediately!
    arpita

    Hi,
    1. Ask system admin to download the latest Solution Manager contents ST-ICO 150_700 * and import.
    2. Transaction SOLAR_PROJECT_ADMIN. Create a project. Just give name.
    3. Transaction SMSY. Generate logical component for SRM and ERP.
    4. Transaction SOLAR_PROJECT_ADMIN. Add logical component in System landscape tab.
    5. Transaction SOLAR01. Go to Business Scenario node then select Structure tab. Select Business Scenario.
    6. Transaction SOLAR02. Go to Configuration node then select Structure tab. Change Configuration Structure. select SRM and ERP.
    7. Transaction SOLAR02. Navigate Configuration node then select configuration tab. You see many configuration documents are linked.
    Regards,
    Masa

Maybe you are looking for