Web Service Tool - to add the attribute (to get a new TAG) for existing Obj

Hi Gurus
I have existing (productive) object name which we use for Letter Templates
I need to add the new attribute but when I select it (highlight) the buttom below "Confirm selection" is not active, so when I got to "Maintain Attributes" I can't see my attribute there...
Question is - how to do that?
Do I need to got ot Settings first and make my WS "Not Productive" (what is the sequence)?
Or I need to create a NEW web service (to re-place the current one) ?
Thank you.

hi There,
Once the service is made Productive you can not make any changes.
So first change it to non productive.
Then add the attributes and again set it to productive.
Hope this helps.
Regards,
Suchita

Similar Messages

ADF page calling Web Service with multiple params the right way

Hello,
I am using JDev 11.1.1.4.0.
I have an email notification web service that takes 4 parameters, from, to, subject and body. What I need to do is at the end of each 'Commit', call this web service to send notification to a group of audiences telling them a new record has been created. Following are steps I took to make it work:
1. Created a web service data control using the email notification WSDL.
2. Drag-and-Drop the data control on jspx page as ADF Parameter form.
3. Set Panel Form Layout's Visible property to 'False' so the controls doesn't show.
4. In a backingbean where method 'onSave()' is, I put the code to call the web service.
// in onSave() method after successful commit
      ValueExpression veFrom =
          efactory.createValueExpression(elctx, "#{bindings.from.inputValue}", Object.class);
      veFrom.setValue(elctx, "[email protected]");
      ValueExpression veTo =
          efactory.createValueExpression(elctx, "#{bindings.to.inputValue}", Object.class);
      veTo.setValue(elctx, "[email protected]");
// omitted rest of the params for brevity
      OperationBinding method = bindings.getOperationBinding("process");
      method.execute();This code works, but I am not sure if I am doing it right. For some reason, there is a better way of achieving what I need.
Many thanks in advance for your candid comments and suggestions.
Bones Jones
Edited by: Bones Jones on Apr 29, 2011 6:44 AM

Hi,
As you have dropped a method in the JSPX page as a parameter form, it adds unnecessary UI components, that you will NOT be using.
Instead of making the panelFormLayout visible property to false, delete it from the UI page.
Thus, you would have only the required method binding and the parameters defined as attribute values in the pageDef - which is as expected.
While deleting the panelFormLayout, delete it manually from the page source and doNOT delete thru the structure pane as it would delete the bindings as well.
Thanks,
Navaneeth

Contact Web Service (Web Service Tool in CRM 2007)

Dear Experts,
Has anyone got the Contact Web Service to work using the Web Service tool in CRM 2007. I attempted in creating a web service but I cannot get the attributes such as first name and last name to show up in the XML request.
I have created a service ticket with SAP but its been really slow.
Thanks in advance.
Nitin

Yes,
The steps you mentioned are correct
1) Account Indentification
2) Interaction Record created and displayed
3) Select Service request from the Last 5 interactions from bottom on page
4) Selected one of the Service request
5) In Breadcrumbs dropdown I see
1) Employee(Service) Request(XXXXXXX) --- the one I selected from Interaction history and being displayed
2) Interaction Record (XXXX)*
3) Interaction Record (XXXX)*
4) Identify Employee
I click on breadcrumbs to go back or I press END without pressing SAVE
NEXT
Open the Interaction Record by searching for the same from INBOX
The NEW Employee Request (Service request) created is there
If I use breadcrumbs to go back and repeat steps 1--3 (account Identification to select Service request), it does not create one, it is for only the first time the additional request is created.
I hope I am clear....
Regards
Ravi
Edited by: Ravi Kakkereni on May 30, 2008 10:19 AM

Enhancing web service tool to have further business objects and roots

Hi Gurus,
is it possible to enhance the web service tool in CRM 6.0, to have further business objects and root objects during the creation of a web service.
Currently, there are specific entries, but I want to have additional data in here to create a customer specific word template.
I have found out some tables, but I really do not know how to enhance them and if this is the correct way of adding additional business objects in the web service tool.
Mentioned tables are CRMV_WS_METHODS and CRMV_WS_OBJ_REL.
Has someone of you already did this? Helpful answers will be awarded.
ThanX
AleX

Does nobody have an idea? According to help.sap, only these objects are web service enabled:
-Business Transaction
-Business Partner
-Campaigns
-Case
-Counter
-Installed Base
-Marketing Segments
-Marketing Attributes
-Product
source: http://help.sap.com/saphelp_crm60/helpdata/en/71/365da2ab81488c8fc9b82fd8eb6f0f/content.htm
But what about other components, such as BuAg (Business Agreement) or ISUMD (IS-U Master Data and further data from the ERP system). These components are in the GenIL, e.g.
BUAG with implementation class CL_CRM_BUAG_IL1 or
ISUMD with implementation class CL_CRM_ISU_IL_MD
Is it necessary to use the Web Service Consumption Tool for creating BOL Objects, although the BUAG/ISUMD are already available in CRM?
If so, what must be exactly done with this Tool. Does anyone have experiences here and can provide me further information?
Thanx and regards
Alex
Edited by: Alexandro St. Torro on Nov 11, 2008 9:41 AM

Q: How to expose EEWB custom enhancements via Web Service Tool

How do you expose custom enhancements so that when Selecting Attributes (step 2) of web service tool, you will be able view your custom enhancements? We are able to see the our enhancements via GENIL_MODEL_BROWSER. However, the enhancements are not carried forward to the Web Service Tool, any pointer or help would be rewarded with points.

Hi Michael,
I have a similar requirement, just wanna know how did you solved this?
Could you please share your solution?
Thanks...
//Abhishek

Account Web Service (Web Service Tool in 2007)

Dear Experts,
I have created an Account Web Service using the Web Service Tool in CRM 2007. I am able to create an Accound and query by BP Number.
I need to the ability to query by Name but I am not able to do so. Has anyone done this?
Thanks
Nitin

Hello,
In the webservicetool you need to add a "Query Object" to your webservice. Once you have added the query object (in step 1) you can then select one or multiple fields of this query object in step 3. All the fields you "include" (so not exclude) will be avaible as query fields for your webservice.
This query object is also a BOL object, you can look (and event test!) for appropriate query objects in sapgui transaction GENIL_BOL_BROWSER. Make sure you select the correct "component set", this is the same component set as you have to provide in the webservicetool in step1.
For accounts (business partners in general) there is, for example because there are many for business partners, the query object BuilHeaderSearch can be used which contains nearly all fields of a business partner.
Hope this helps!
Regards,
Joost

Business Object "Service Order" not found in Web Service Tool

Dear Experts,
We're trying to create a web service for Service Order via Web Service Tool,
but we can't find the business object "Service Order" there.
How to step to reproduce the problem:
1. Logon CRM WEBUI with the business role ITSERVICEPRO.
(or T-cd:BSP_WD_CMPWB > Enter component WS_DESIGN_TOOL > Test)
2. Go to Service Operations>Web Service
3. Create a new Web Service
-> In "Service Objects" area at step 1 "Select Objects", there's a drop down list box of "Business Object".
In this list, "Service Order" does not exist.
Other objects such as "Service Confirmation", "Service Order Quotation" etc are available.
How can we create a new web service for Service Order?
Any advise would be highly apprecaited.
Best regards,
F.T.

Hello Rocca,
It is hard coded in FM CRM_SALESDOCUMENT_FILTER that the item which is assigned to object type BUS2000140 would be removed from the upload relevant item list.
To get it replicated, I am afraid that you need to modify the relevant coding here.
Best regards,
Maggie

How can a web service be compliant with the WTK2.1?

I'm using WTK2.1 to develop mobile clients consuming web services.
After published a web service by Apache Axis, I use WTK2.1's Stub Generator to
generate the stub class.
As required by JSR172, I use the "document/literal" encoding style.
The web service class has only one method:
public int newUser(String userName, String password) {
But when I use Stub Generator to generator the stub class, I get the following messages:
************************ Error messages begin *****************************
warning: R2716 WSI-BasicProfile ver. 1.0, namespace attribute not allowed in doc/lit for soapbind:body: "newUser"
warning: R2716 WSI-BasicProfile ver. 1.0, namespace attribute not allowed in doc/lit for soapbind:body: "newUser"
warning: ignoring operation "newUser": more than one part in input message
warning: Port "User" does not contain any usable operations
************************ Error messages end *****************************
And following is the wsdl file:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://localhost:8080/web/services/User" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://localhost:8080/web/services/User" xmlns:intf="http://localhost:8080/web/services/User" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="http://ws.mauction.scucdut.edu.cn" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><wsdl:types><schema targetNamespace="http://ws.mauction.scucdut.edu.cn" xmlns="http://www.w3.org/2001/XMLSchema"><element name="userName" type="xsd:string"/><element name="password" type="xsd:string"/></schema><schema targetNamespace="http://localhost:8080/web/services/User" xmlns="http://www.w3.org/2001/XMLSchema"><element name="newUserReturn" type="xsd:int"/></schema></wsdl:types>
<wsdl:message name="newUserRequest">
<wsdl:part element="tns1:userName" name="userName"/>
<wsdl:part element="tns1:password" name="password"/>
</wsdl:message>
<wsdl:message name="newUserResponse">
<wsdl:part element="impl:newUserReturn" name="newUserReturn"/>
</wsdl:message>
<wsdl:portType name="User">
<wsdl:operation name="newUser" parameterOrder="userName password">
<wsdl:input message="impl:newUserRequest" name="newUserRequest"/>
<wsdl:output message="impl:newUserResponse" name="newUserResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="UserSoapBinding" type="impl:User">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="newUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="newUserRequest">
<wsdlsoap:body namespace="http://ws.mauction.scucdut.edu.cn" use="literal"/>
</wsdl:input>
<wsdl:output name="newUserResponse">
<wsdlsoap:body namespace="http://localhost:8080/web/services/User" use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="UserService">
<wsdl:port binding="impl:UserSoapBinding" name="User">
<wsdlsoap:address location="http://localhost:8080/web/services/User"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
So, can anybody tell me how to make the web service be used by the Stub Generator properly?

Hi,
I am new to WTK 2.1 and I am also using Axis to generate WSDL.
one thing I figured out was to remove the namespace info behind all body tags.
for instance in your code, replace:
<wsdlsoap:body namespace="http://localhost:8080/web/services/User" use="literal"/>
by
<wsdlsoap:body use="literal"/>
and it should work. don't ask me why but it worked for me.

Web service tools

Hi guys,
i am new for java web services. would you please help me to configure my Eclipse3.1 for web service development.
Please tell me what tools or plug-ins i should require.
Thanks in advance
Ravi

Hi Palnati,
If you want you can use the How to guide for this purpose. It explains clearly about the steps involved in it and its very easy.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Follow the procedure as explained in it and tell me if any help is required.
Thanks and Regards,
Sanjeev.

Web Service tool

Hello ,
My client is working on CRM2007 without J2EE installation. We have a new requirement to use "document template" functionality. We need to create a new WEB service using WEB Service tool. I am not a basis consulter, so I have a question: Is there a possibility to create WEB service without J2EE engine? Which additional functionality will be missing without J2EE?
Thank you very much.

Hello,
What is the SAP documentation you're talking about? Here you will find anything you need to know about object-enabled web services:
http://help.sap.com/saphelp_crm70/helpdata/EN/fb/6745717b59421e9fe15b07995dca30/frameset.htm
I guess you need to configure J2EE for test purpose only... but I'm not sure.
If you have a system available already, just try and test it! You can download may tools over the web to test webservices created in SAP (without using the test tool provided by SAP). And be aware that if Java stack is really necessary you can install it at any time.
Best regards,
Nicolas.

Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file

Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.

Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Web service and servlets in the same project...web.xml?

Hello, I have a problem with my web service.
I have a server, which displays a web service. I programmed this service with JAXRPC.
I have a client, in another directory. I succeded in compiling, deploying and running the web service.
The problem is that after I tried to integrate this service in an existing project. This project contains servlets. In these servlets, I'm using sessions.
These servlets are on the same side as the server of the web service. Because of the implementation of my code, I'd like to use in the class that represents the server of the service, the same session as the one I'm using in the servlets.
But of course, it's not working by itself. I know there's something to do with the web.xml files.
The thing is that I created a web.xml file for the service, and another for the servlets.
I was thinking of joining both of them in one xml file, but everything crashes then...
Could someone tell me how to create a project with a web service and servlets, and mostly how to configure the xml file??
Thanks for any help
Philippe

Hello, I have a problem with my web service.
I have a server, which displays a web service. I programmed this service with JAXRPC.
I have a client, in another directory. I succeded in compiling, deploying and running the web service.
The problem is that after I tried to integrate this service in an existing project. This project contains servlets. In these servlets, I'm using sessions.
These servlets are on the same side as the server of the web service. Because of the implementation of my code, I'd like to use in the class that represents the server of the service, the same session as the one I'm using in the servlets.
But of course, it's not working by itself. I know there's something to do with the web.xml files.
The thing is that I created a web.xml file for the service, and another for the servlets.
I was thinking of joining both of them in one xml file, but everything crashes then...
Could someone tell me how to create a project with a web service and servlets, and mostly how to configure the xml file??
Thanks for any help
Philippe

Office 365 Reporting Web Service Message Trace - It says it can get the past 30 days but i can only get the past 7 days

It says Message Trace data is stored for 90 days here: http://technet.microsoft.com/library/jj723162(v=exchg.150).aspx
When running the MessageTrace report using the Office 365 Reporting Web Service it only returns the past
7 days, even though it says up to 30 days here: http://msdn.microsoft.com/en-us/library/office/jj984335(v=office.15).aspx.
PowerShell’s "Get-MessageTrace" cmdlet only returns the past 7 days as well. PowerShell also has
an alternative cmdlet called "Start-HistoricalSearch" which returns the MessageTrace results between 7 and 90 days old.
Is it supposed to return 30 days, or is the documentation wrong, or is their an alternative report (like
PowerShell) to get MessageTrace results for over 7 days using the Office 365 Reporting Web Service?
Note: I'm aware that the results are returned in batches of 2000 MessageTrace results.

That document is pretty old last modified March 2013 so I would say it's out of date. The reporting services are still pretty new in the current release I believe 7 days is limit for the Rest Endpoint and the Get-MessageTrace cmdlet (which is what
the more recent documentation around message tracking say) there is no REST endpoint for Start-HistoricalSearch you can see all the current endpoints by looking at the Metadata via
https://reports.office365.com/ecp/reportingwebservice/reporting.svc/$metadata
These services are evolving so new features and reports are added which is explained in
http://msdn.microsoft.com/EN-US/library/office/jj984346(v=office.15).aspx . But there is no public information on Timeframes and what reports and features are going to be added in future updates (that I know of). If you need data older then
7 days then Automating the HistoricalSearch cmdlets would be the way to do it for now.
Cheers
Glen

Web services client without using the WSDL file

I need to invoke a web service without WSDL, as the method and primitive type parameters will be defined by the user at runtime..
I am not interested in the return.. and can live without complextype parameters..
I found this example.. that seems to do what I need.. is there an open source equivalent to these weblogic classes? or maybe in java se?
http://edocs.bea.com/wls/docs61/webServices/advanced.html

http://www.ibm.com/developerworks/library/ws-tip-jaxwsrpc4/index.html
http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.wsfep.multiplatform.doc/info/ae/ae/twbs_jaxwsdynclient.html

Problem in consuming the Web service throgh "Onload" of the applicatuon.

hi , when i consume web service "onload" of the application ,
i am unable to retrive the last result .
but when i consume the same web service "onclick" event of a
button , i am able to get the last result.
Can i consume a web service from "onload" of the application
Any suggetions or workaround will be appriciated.
Thanks in advance.
Regards
Shashi

you need to register an result handler as requests are async
so when you the load the results are not instant so declare a
result handler and get the results from there

Web Service Tool - to add the attribute (to get a new TAG) for existing Obj

Similar Messages

Maybe you are looking for