Web sites visited aren't highlighted after upgrading to 30.0

After doing a search and visiting web sites they don't remain highlighted making it hard to keep track of sites visited.

Hmm, it works if you reload, but when you go back the effect is lost. Could you test something. Firefox caches the last state of the page, and it may be failing to update the cached version.
This workaround turns off the feature that tries to save time redrawing the page:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered
(3) Double-click the '''browser.sessionhistory.max_total_viewers''' preference and change the value from -1 to 0 (that's a zero).
(Please don't change any other similar-sounding settings to 0 or you may disable Firefox's ability to save/restore your open windows and tabs.)
Then reload the problem page. Hopefully after that you won't need to reload. Any luck?

Similar Messages

Gettin "Assertion Failed" message and "Assert: parent node must have _DOMElement set", first when trying to bookmark and then when the "auto fill" on some web sites is used. Started after 3.6.9 automatic upgrade.

Open Firefox and navigate to web site. Try to save to bookmarks and get the "assertion Failed" message and "Assert: parent node must have _DOMElement set" followed by a list of 8 (0-8) items.

Try the Tiny Menu extension. I am using an older version of Tiny Menu on Lucid with Firefox 3.6.x and it works fine.

Cannot create Site Collection in new Webapplication after upgrade to SP1

Hello,
after upgrading my SharePoint Server 2013 (small Farm with one SP and one SQL) I am not able to create new site collections in new web application. Furthermore I am facing trouble when creating a new web application which I suspect is a connected problem.
Environment:
SharePoint 2013 ENU with german language pack upgraded to SharePoint 2013 SP1. Both parts are upgraded (SharePoint and Language pack). Afterwards I have done a psconfigui to upgrade the DB which works fine. Only one DB (BDC is still running in compatibility
mode).
Everything is running on a single server on Windows Server 2012.
Problem(s)
When I create a new web application it tooks a very long time (3 + minutes) and ends with an error message (Sorry something went wrong !). If I close this message I can see the new web application and also its content DB. If I then try to add a new site
collection into this new web application it fails (Sorry something went wrong).
I suspect this is a connected error, but I have now idea what is going on. Everythings else seems to work...
Any idea or support would be great.
Thanks in advance
Martin

You can get issues if you hit a time out message during the creation process. How does it work if you create a site collection using PowerShell?
You can extend the timeout duration this is for web application creation but might be of use here too: http://blog.babunski.me/2013/07/17/sharepoint-404-error-while-creating-a-new-web-application/
Do you get any error messages when you create the site collection?

Vertical column pop-up button-"OPEN"-with left " " appears-bottom right corner Firefox screen-Independent of web-site visited-Am "secured" against virus-Have not touched button: "Danger, Will Robinson." Appreciate any help. Thnx. DanDeren

Occasionally and sporadically - I cannot reproduce this issue - a small vertical column-ed pop-up button appears in the lower right corner of my (Firefox) browser screen. It is not clear what causes this - I thought perhaps that it had something to do with Google's new gmail format which I have, so far refused to adopt, although when it forces me to do so, I Accept and then re-configure back to the old look. I don't think the problem is with gmail, though since tonight I was accessing the New York Time subscription web-site. However, tonight - 31JAN2012 - this button popped up, stuck around for maybe 30 seconds and then went away. It is small - about a quarter inch wide; perhaps one-half to three quarters of an inch tall. It displays on the top of the button the "<" followed underneath by the word "OPEN" (displayed vertically). I know better than to push an OPEN button whose function is absolutely opaque to me - fool me once... My desktop has the latest version of Firefox - 9.0.1 and I just loaded the latest update. I am running Windows XP Version 5.1 (Build 2600.xpsp_sp3_gdr.111025-1629 : Service Pack 3). Further info re. operating system: Microsoft Windows XP Home Edition Service Pack 3 - that was probably pretty clear from the Version and Build info above. Hardware: ACER-42041E6643 - ACPI Multiprocessor PC - Chip/Processor: Intel Atom CPU 230 @ 1.60 GHz (2 of these). I can provide more system and configuration information, as necessary. As it is, I go to System Info and it will not let me copy all of the system info above - I had to copy it brute-force manually. I have managed tech support organizations in the past. The first question you ask the user is: "What changed?" or perhaps "What did you change?" Like every other user with an issue, my response is: Nothing of which I am aware. I certainly am not going to push this button - perhaps it toggles between something and something else - more than like so - or it opens "something" - I will not find out what since I refuse to push it. I am guessing this is some benign "feature" of which I am unaware. Any assistance with this will be greatly appreciated. Thanks and best, Dan Deren.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

How do I get time & date for specific web sites visits from the fire fox history?

how do I get history information for the time and date I went to specific web sites from firefox?

The 'View' menu at the top, select Sidebar > History. At the right top of the sidebar that appears, click "View" button, select "View by date" or "View by date and site".

Web Server reads /etc/apache2 config after upgrade to 10.8.1

I just updated one of my servers to 10.8.1 from 10.8. It seems with the ML update the OSX Server configuration files in
/Library/Server/Web/Config/apache2
are no longer being read; instead, the non-server configuration files in
/etc/apache2 get read. I was wondering if anyone knew an easy fix? Also, DocumentRoot was set to an external drive
/Volume/Library. The update created a folder at my mount point containing a default WebDocuments in it. My external
drive ends up being mounted at Library 1. Why?

The first part of this question is actually partially explained by the second part. ML Server was not reading /etc/apache2, it was reading the osx configuration file, but somehow after the upgrade it was creating a new folder at the mount point of my external drive being used to hold my webdocuments. This seemed to happen before my drive got mounted (obviously). Deleting this folder and restarting seemed to fix the issue.

Web Application Shows Pop up message after Upgrading to Java 7 Update 11

Hello,
We have developed a Java based Enterprise Web Application and currently using in Production environment. With the recent Java Security vulnerability issue, the client machines (desktops) were upgraded to Java 7 update 11 (Java plugin for Web browser). After the upgrade, users are having issues in accessing the application. User gets a Security Warning popup - "Do you want to run this application? An Application from the location below is requesting permission to run Location: xyz.... ". Even if they check the "Do not show this again for this app" checkbox, it still shows the Security Warning popup for every screen clicked by the user. The Application has "Trusted Certificate" but using a 3rd party jar which has an unsigned applet. The popup goes away if we change security level to Medium. We don't want to reduce the security level from 'High' to 'Medium' because of the Security issues and users may access other websites.
Is there a way to resolve the unsigned applet issue without compromising the security?
Thanks
Padmanaban

With Java 7u11 Oracle increased the default security level to help reduce the of recently discovered exploits getting past the security sandbox.
That said, I seem to recall from a few years ago that any untrusted component delivered to the client might cause the entire application to be treated as untrusted (as it should), and this may be the case here.
Although license issues may prevent you from doing this, I have found that unpacking and then repacking-and-resigning (with your own key) all 3rd party JARs can get around this, but only you can decide whether this is (a) legal and (b) advisable in the first place.

Site Collection level Search Scopes after Upgraded to 2013

In SharePoint 2010 we have good amount of site collection level search scopes and it has been heavily used in search scope down.
Please correct me if any of my below statement is wrong
1.After migration these scopes cannot be used and it will not appear in search drop down.
2.Only opition I have is to create Result Source and Configure search navigation at Site Level?
3.For Result Sources to appear in drop down I need to have individual search page for every custom result source.
I would really appreciate your inputs
Thank you
Vijay

1. Usually 2010 Search Scopes can be used after migrating to 2013. What you can't do is edit them or create new ones. However, I've had mixed luck with them. About 75% seem to work, with the rest being broken beyond repair.
2. If the migrated scope doesn't continue to work your only real option is a REsult Source. To add them to the dropdown you will need to configure the navigation at the Site level.
3. Result sources can re-use result pages used by other Result sources. You need a Result source for each entry, but that result source may point to the same page as another result source.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Toolbar Images aren't displayed after upgrading to CR VS2005 Sp1

Hi,
I have upgraded the embedded CR VS2005 with the CR VS2005 SP1.
Previously, the toolbar images is displayed correctly in the production pc.
I have copied aspnet_client to the root of the web and add httpHandlers for CrystalImageHandler.aspx in the web.config.
I also added authorization for aspnet_client in web.config.
But it still didn't display anything.
The images showed correctly in my deployment pc.
Anybody can help me how to fix this?
Thanks before

My client has found the solution for this problem.
Apparently, the CR will redirect the images and js to the windows folder.
I included "CrystalReportWebFormViewer3" folder to be copied to C:\Windows\Microsoft.NET\Framework\v2.0.50727\ASP.NETClientFiles\ in the installer and it makes the images displayed works fine now.
Thanks for the help.
Cheers,
Marry

Premier Pro CS6 project files (in the 6.0 folder) aren't there after upgrade to CC

I've recently upgraded from CS6 to CC and my premier pro project files form the CS6 version aren't in the Adibe folder. I'm hoping these were backed up to a hidden folder or something, or there is a way to get them back. I've still got the media (videos and audio etc). It's the project file that I cant find. Any help?

For product specific questions you may do better in the specific product forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right to open the drop down list and scroll
Direct to http://forums.adobe.com/community/premiere?view=discussions
When you get there, LOTS more information you need to provide
-PPro Information FAQ http://forums.adobe.com/message/4200840

After updating to FF 5.0.1, FF no longer will show a web site forum thread as read after reading it. Is there a fix for this?

When using FF 3.8 and viewing a list of unread posts on a forum, I can select a post, read it and then return to the list of unread posts where the one that I have read now shows that it has been read while the others remain unread.
This no longer happens with FF 5.0.1. When returning to the list they all still show as being unread. This is determined by the 'title' being accented or highlighted in bold for an unread and not being in bold when read.
This is kind of annoying particularly when a post was made and it does not show on the returned list either.

When using FF 3.8 and viewing a list of unread posts on a forum, I can select a post, read it and then return to the list of unread posts where the one that I have read now shows that it has been read while the others remain unread.
This no longer happens with FF 5.0.1. When returning to the list they all still show as being unread. This is determined by the 'title' being accented or highlighted in bold for an unread and not being in bold when read.
This is kind of annoying particularly when a post was made and it does not show on the returned list either.

How do I get print selection to work when I only want to print a paragraph on a web site that I had highlighted?

I can't print out a highlighted paragraph or section from a article or data. It won't let me select the selection option, only the print all or page 1 of etc.
I have no trouble if using Explorer 9.

It sort of worked. I selected the three lines of the given answer above, followed the directions and the printer responded with the header at the top followed by a trace of the very bottom edge of the first line and then a full rendering of the next two lines. I checked the page setup and the top and bottom margins were normal at .5 ins.

Ever since I downloaded the new Firefox, the web sites pictures aren't clear. What can I do to adjust this?

Pictures are not clear as they were when I used an older version of Firefox.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Web sites do not require me to authenticate after FF4 closes

I recently upgraded to FF4. Web site that require authentication even after I close Firefox - maintain that username and password rom the pop up box that appears assking for my login and password. It isn't a setting I have turned on. The only way to fully log out of a site that has a pop up log-in authentication is to clear everything.

Thanks but it's not a problem of connexion. The bulk of the sites open properly, just some do not load images or do not open properly (only text as on some mobile devices). I tried everything I found on this forum - changing user, disabling plugins, reinstall, change preferences... nothing works. Really annoying

Safari can't open specifics web sites

i'm having troubles to re-open some web sites visited earlier.
I'm on a macbook pro with leopard and safari 5.0.1, all updates installed
Example: www.tgcom.it
The first time opened without any problem, the second time can't open again.
after typing the address and hit the return key, safari display immediately (without even trying to load the page) the white page with the alert:
Safari can't connect to the server.
Safari can't open the page “http://www.tgcom.it/” because safari can't connect to the server “www.tgcom.it”.
I've try already to reset Safari and clean the cache. No changes.
On the same network I have an iMac, which is loading this page anytime without any problem.
As well a windows PC is on the same home network, the page can be loaded too.
Only on this macbook pro i'm experiencing this issue.
I don't know what to think more..... the problem can't be the web-site (it works with other machines)
Other web sites on the macbook are working properly, only three address seams to be blocked from this machine only....
any suggestions???? thanks
Marco

I suspect it has something to do with your ISP.
Adding Open DNS codes to your Network Preferences, should give good results:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.

Web sites visited aren't highlighted after upgrading to 30.0

Similar Messages

Maybe you are looking for