Web Template (0ANALYSIS_Pattern) Drill down error

Hi,
Currently i am working on BI7.0 default web template (0ANALYSIS_PATTREN)
When i drilldown on a Freechar i am displayed with
Result set too large (1016010 cells); data retrieval restricted by configuration (maximum = 500000 cells)
Please update how to proceed
When i perform same action on 3X template results are displayed correctly
Thanks in advance

Hi,
You can change the allowed size of cells by doing the following:
se38-> SAP_RSADMIN_MAINTAIN and give object= BICS_DA_RESULT_SET_LIMIT_MAX.
Chnage the value to the number of rows you wish to displa, say 1200000 in your case.
There will be performace implications in allowing this as the report will take longer to run.
Thanks,
Nick.

Similar Messages

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

Advanced template to drill down from one dimension to another

Dear all:
Situation
I am trying to create an report that displays my Accounts by month. In addition, after I double-click each account (if it is a base member), it drills down to open Entity (in my case Cost Center) associated with that Account number. In the Entity drill-down section, once the Entity becomes a base member, it drills down to IO (internal orders) associated with a particular cost center.
Data
1. I tried to manipulate existing "Double Drill Down" dynamic template, and disabled the column expansion (because my columns consist of months of actual vs. budget and some ratio calculation). The problem is that after I drilled down, my EVGTS formula was not replicated in the other dimension
2. I tried to integrate EVEXP into EVDRE but was unsuccessful too... The expansion worked as if everything got expanded at the same time.
Question
Is my approach correct? Is this an even good practice to do, or I should keep it as standard as possible?
Thank you!
Have a great day!
Sincerely,
Brian

The double-drill down dynamic template accommodate my need, except I didn't modify the report to my format correctly.

Error while saving web template in WAD? Error in opening RFC Connection?

Hi All.
In BI 7.0, While trying to save an web template using BEx WAD resulting an error as mentioned below:
" Java communication error : Error when opening an RFC connection "
Who provides this RFC connection?
- By Basis guy or BI Guy or EP guy or helpdesk.
Please reply.
Thanks in Advance.

Hi,
Kindly review the notes 917950 and 888687 and ensure that all your web configuration settings are proper.
Award points if helpful.
Thank you.
Regards
Suresh

URGENT!! Drill Down Error with Character Set non-ascii on Discoverer Viewer

Hi,
We have an error in a Drill down. It comes up when the Discoverer Viewer tries to process data that contains special character (non-ascii) in a query's filter. The same report that does not perform well with special characters, does perform well if the data dont contains special characters, so it seems to be an issue processing non-ascii chars in this Discoverer Viewer instance.
Ex. FIELD_NAME = 'Ã¶ÜÃ¦Ã¤é (This filter is contained in a query that this getting an error msg="We're sorry, the server encountered an unexpected condition" ).
It might be possible that there are some problems with the Discoverer charset ?
We will appreciate any suggestion about this respect.
Regrads,
Seba.

Sure,
This is the hole sql command that get an error in a drill down action process
SELECT NVL (sf_dw_people_skills.major_name, 'No Major'),
sf_dw_people_skills.minor_name, sf_dw_people_skills.skill_name,
sf_dw_people_skills.skill_level,
sf_dw_people_all_rel_v.supervisor_name,
sf_dw_people_all_rel_v.person_name, sf_dw_people_all_rel_v.LOCATION,
sf_dw_people_all_rel_v.supervisor_dir_name, COUNT (1)
FROM olnreport2.sf_dw_people_all_rel sf_dw_people_all_rel,
olnreport2.sf_dw_people_skills sf_dw_people_skills,
olnreport2.sf_dw_people_all_rel_v sf_dw_people_all_rel_v,
olnreport2.sf_dw_competences_rel sf_dw_competences_rel
WHERE ( (sf_dw_people_all_rel.person_id = sf_dw_people_skills.person_id
AND (sf_dw_people_all_rel_v.person_id =
sf_dw_people_skills.person_id
AND (sf_dw_competences_rel.skill_id = sf_dw_people_skills.skill_id
AND (sf_dw_people_all_rel_v.supervisor_id =
sf_dw_people_all_rel.supervisor_id
AND (sf_dw_people_all_rel_v.supervisor_name = 'Kunz, Jürgen Mr') /*When I replace the charset 'ü' by u, it´s work ok*/
AND (sf_dw_people_skills.minor_name = 'HRMS')
AND (sf_dw_people_skills.skill_name = 'HR Intelligence')
AND ( sf_dw_competences_rel.competence_type = :"competence_type"
AND sf_dw_competences_rel.competence_id IN ((:"competence_id"))
AND (sf_dw_people_all_rel.supervisor_id IN ((:"Manager")))
AND ((( :"resource_manager" <> -1
AND olnreport2.do_val_person_job_prod
('RESOURCE_MANAGER_VIEW',
sf_dw_people_skills.person_id,
sf_dw_people_skills.job_code,
sf_dw_people_skills.product_code,
:"resource_manager"
) = 'Y'
OR :"resource_manager" = -1
GROUP BY NVL (sf_dw_people_skills.major_name, 'No Major'),
sf_dw_people_skills.minor_name,
sf_dw_people_skills.skill_name,
sf_dw_people_skills.skill_level,
sf_dw_people_all_rel_v.supervisor_name,
sf_dw_people_all_rel_v.person_name,
sf_dw_people_all_rel_v.LOCATION,
sf_dw_people_all_rel_v.supervisor_dir_name;
Regards,
Seba.

Drill Down Error DET_LEVEL

Hi,
I am writing a macro to enable data entry only when drill-down on 2 characteristics say Customer and Material.
=========================
IF
- Disaggregation Check
DET_LEVEL('9AMATNR')=1
AND
DET_LEVEL('9ACUST')=1
Row : KeyFigure (Attributes)=
ROW_INPUT(1)
ELSE
Row : KeyFigure (Attributes)=
ROW_INPUT(0)
ENDIF
=========================
When I try to generate this ,I am getting the error
the field DET_LEVEL is unkknown but there is a similar field CON_DET_LEVEL.
I tried using AGG_LEVEL also but then got the error that CON_AGG_LEVEl is available.
But I couldn't find either CON_DET_LEVEL or CON_AGG_LEVEL in functions list. Neither was I able to use it.
Can anyone tell me what could be the problem ?
Thanks,
Arunesh Chakrapani
Edited by: Arunesh Chakrapani on Jan 31, 2008 8:53 AM

HI Arunesh.
In general, when maintaining parameters inside parenthesis make sure there is a space following the '(' and before the ')'.
So in your example:
DET_LEVEL('9AMATNR')=1
should be
DET_LEVEL( '9AMATNR' )=1
Hope this helps.
M

Drill down error on Viewer

Hi, I'm having an error on Discoverer Viewer (Release 4.1.44) when I try to Drill down on an element. The drill down functionality works ok, except when the drill down elements are too many and needs to be drawn on Next Page. In that case I got an error ("The page cannot be display").
Anybody had that problem, or knows why it is happening?
Thanks in advance
Ivo

Though I cannot say without investigating this if this is a bug or due to some other issue, the first advice would be for you to upgrade to the latest patchset, 4.1.48 or later. There is a good chance that this issue, if a bug, may have been fixed in a subsequent release.
The other option would be to take a look at Metalink.Oracle.com and see this issue has been reported earlier.
Thanks
Abhinav Agarwal
Oracle Business Intelligence Product Management

Drill down error

Hello Experts
When I drill down a report according to Characteristics( ship_to and sold_to) The report is displaying following Messege"abort System error in Program Cl_RSDM_READ_MASTER_DATA and form_sidval_drect_" and the report is disconnecting from BW server, I rpaired all the Masterdata Objects in RSRV but no use? I checked in SAP Note, looks like no relevent notes for this error.
we are using BW3.1
Any guidance or suggestions
Thanks
SP

Hi SP,
Check you have done the identifications properly in the multi provider. The error message shows for the SID Conflict for the particular infoobject. In RSRV Could you please run the following test and if there are any errors you can run repair.
Tests in Transaction RSRV -> All Combined Tests -> Master Data -> Check Master Data for a Characteristic
Regards

Drill down error in 10g - No Columns displayed

When drilling down on OBIEE 10g reports sometimes the result is "No columns displayed", we cannot find any particular reason why this happened. The columns are available and should show up so it's perceived as an error for our users.
Does anyone know how and why this happens and what a possible solution might be?
Much appreciated!

Hi SP,
Check you have done the identifications properly in the multi provider. The error message shows for the SID Conflict for the particular infoobject. In RSRV Could you please run the following test and if there are any errors you can run repair.
Tests in Transaction RSRV -> All Combined Tests -> Master Data -> Check Master Data for a Characteristic
Regards

Drill down error in disc. Viewer

Hi there,
I'm getting the following error while trying to drill down in Disco. Viewer.
Error applying Drill.Press your browser's Back button to undo the last action or click Run Query to start again.<<
It works fine in Plus and Desktop.
Any idea?
Thanks in advance!
Maja

First thing you might want to check is metalink as I seem to recall a problem with drill-down in Viewer (ie: not working correctly) but not sure under what circumstances.
That would be the quickest to see if it's a known bug or your setup.
Russ

Analysis Wizard Drill Down Error

When i drill down on a fsg report on some rows I get the following error message
"This row is not unique. Drill cannot proceed"
This only occurs on some of the rows in the report
I have looked at the row definitions and can not see anything to suggest the row is anything but unique.
Does anyone have any ideas on how to identify the issue, and resolve my problem
Thanks

You can access the doc through My Oracle Support (MOS) website -- https://support.oracle.com
You will need to have a username/password to access the doc.
I cannot post the contents of MOS doc as this violates Oracle Support agreement policy.
Thanks,
Hussein

Discoverer drill Down error.

HI
I have installed Oracle BI 10.1.2. I have applied the patch 59672969 to resolve some bugs related to drilling down. However in discoverer viewer I do the follwing
1. Expand a workbook and select one of the sub workgroups
2. Enter the parameters needeed on the next page
3. Expand one of the columns on the next page and select an option from the list that appears.
The Following error appears:
An error occurred while handling the Even. See application log for more details.
Empty input (or null input) is not allowed

Hi the patch I applied was 5672969

Drill Down Error / Report Builder Limitations

I have been having alot of problems recently with the new
version of 7.0.2. A few things that i have noticed is that i can't
do drill downs anymore. I don't think it's a coding issue since it
was working in the previous 2 releases of Report Builder(7.0,
7.0.1).
Another problem is that I have reports that return around
1,000 pages. Now, I know there is a limitation on Flash Paper/Flash
Player, whoever i was wondering if there is a work around or
something i can do to get this reports to finish. Right now I get
the error roughly stating "A script has cause this flash movie to
become unstable and if you continue it might make the computer
unresponsive". Currently the only work around that i have is to
offer the same report in PDF format, however 90% of our customers
want to run it in flash paper, and my boss wonts it to work using
flash paper aswell.
Any sugguestions that you might have or anything please email
me. If you have any questions please email me aswell.
Thank you,
Daniel

Yeah, still having this issue... Can't get the links working
in Flash Paper. A temp fix is to have the report in PDF instead of
Flash.

Drill Down error with more than one dimension

Hello
I'm using AWM 10.2.0.3.0A with Oracle 10.2.0.1.0 and i can't perform drill down operation when i have more than one dimension in the same axis. That is, when i have two dimensions, a can't perform drill down on both dimenions at the same time, but only one at a time.
Would anyone ever had this problem? What can be?
Thanks
Luciano

Hello Brijesh
I succeed do this operation in other works, but not this. After performing drill down in the first dimension, i clicked on the second dimension and nothing happens.
It doesn't emit any error message.
Normally should be able to view the data calculated for the two dimensions. I have 6 small dimensions tables (average of 700 records). I don't know what can be.
Thanks,
Luciano

Webi authorization for drill down

Hi all,
we have made a report based on bex query with BW hierarchy. Our users can acces the correct hierarchy node (based on authorization in bw) but they cant drill down the data even when there is a "+" sign next to the hierarchy node. Can someone tell me which authorization should i enable for them to drill down the report ?
Thanks,
regards Martin Zluky

Hi
Once check it in preferences ->webi>driill options -->check Prompt when drill requires additional data &
Synchronize drill on report blocks
Or
Make sure u created list of hierarchies in universe
let me know if there are any issues
sunil

Web Template (0ANALYSIS_Pattern) Drill down error

Similar Messages

Maybe you are looking for