Web template data is not showing

Hello All,
Can any one tell me what would be the reason that when i am executing the query separately it is showing the data but when I execute the web template it is not showing any data it shows as No applicable data. Please note I am using the same selection for the both execution.
Is there any setting in WAD for this kind of error?
Thanks in advance
Nitin

Hi Nitin,
The report will show as "no applicable data found" only when the report doesn't contain the data which meet our req selections.If you have any variable selection screen before executing the web report, run with out giving any selctions.If that is a mandatory variable then make them as optional and run with out giving any selections.But , If you want selected data and the report is showing no data when you give that selections means, there is no data available for that selection combinations.So, check this once.
Thanks.

Similar Messages

  • In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie.  Is there someway to refresh the IPhoto event in IMovie?

    Background:  I'm transferring file folders from a Visa laptop via an external hard drive to my IMac.  In the folders are photos and videos from different cameras.  SO I first tried to import to IMovie but it would not recognize any of the files.  So then I imported into IPhoto and both photos and videos were imported and I created events for each folder.  When I first opened IMovie I had to wait for it to create "thumb nails".  Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events.  I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie.    I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie. 
    I'm doing this on three events with about 100 photos and videos.  But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie.   I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.  
    Appreciate any tips or pointers.
    OBTW this is my first question as a first time Apple owner. 

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • Time of email shows in Date Column, Date is not showing on new emails

    Date is not showing in Date column. Only time is showing.
    I just migrated from OE - Old emails show the time & Date.

    If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

  • Due date is not showing up in UWL

    Hi ,
    Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
    I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
    I really appreciate your help.
    Regards
    Mark

    Hi,
    As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
    Regards,
    Karri

  • Web template "0ADHOC" does not exist in the master system error

    Hi to all,
    The Web template "0ADHOC" does not exist in the master system.
    Error coming while executing query on web template.
    Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
    Please can anyone tell me what the problem is?
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Hi,
    According to the error message,
    The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
    OR
    Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
    You will see
                                         Template ID :
                                         Reusable Web Item ID :
                                         Version :
    Give "template name" and see what is the version.
    If it is "D" then please change that to version "A". and check if issue persist.
    Hope this helps.
    Regards,
    Mani

  • Data is not showing up in report on ODS

    Hi All,
    we have requirment like below
    we have an ODS  no update rules and nothing with 5 fields . with bex reporting flag checked..
    we have function module to fill the data for these 5 fileds in  ODS active data table .
    So data is there only in active data table that table was filling  by using  function module.
    so i need report that data .when i created and run the report data its not showing up.
    Please let me know whats the issues is and how to handle.
    I appreciate your help
    Regards,
    Sirisha

    In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
    thanks.
    Wond

  • Web Template URL for Web Template ZTEST could not be Generated

    Hello Experts,
                           I have designed a Template in WAD with the name ZTEST(example) when i am trying to execute it in Browser, it is throwing an error like "Web Template URL for Web Template ZTEST could not generated". I am working on 7.0 WAD
    Please suggest me if there is any settings to done.
    Thanks in Advance,
    Regards,
    Vishnu.

    Hello Mr. Wond,
                                Even if i am Executing using a default Template it is throwing the same error that " Web Template URL could not be generated". Meanwhile when i am working on this issue i found that some Command URLs should be defined, but i am unable to trace where to define this URL Command like <a href=u201Dhttp://myAppServer:myPort/SAP/BW/BEx?pageno=1&request_no=8&cmd=ldoc&template_id=EXAMPLE_TEMPLATEu201C></a>
    Please suggest..................
    Regards,
    Vishnu.

  • BizTalk BAM Data is not showing

    In BizTalk 2010,  BAM Data is showing correctly.
    But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
    Event Log shows not any error.
    What I have to check for getting BAM data in 2013 ?
    Which configurations should I check ?
    Any kind of help would be appreciated.
    Prakash

    Prakash,
    There are two parts to it:
    Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
    Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
    If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
    If event log is clean, no data in
    TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step  which is deploying the tracking
    profiles may not have happened properly.
    Check the following article for help:
    Deploying and Undeploying Tracking Profiles
    How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Erorr  " The Web template "0ANALYZER" does not exist in the master system "

    Hi
    i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
    "The Web template "0ANALYZER" does not exist in the master system "
    i activated all templates but not able to execute any report in web
    i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
    please do help me

    For clarification:
    If following happens:
    > you are launching the query with URL like:
    http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
    > then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
    --> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
    --> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
    When you problem is other nature you have to describe it in detail.
    Regards, Karol

  • Web Analytics reports and not showing data

    Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
    reasons: (1) Web Analytics has not been enabled long enough to generate data;
    (2) There is insufficient data to generate this report; (3) Data logging
    required for this report might not be enabled; (4) Data aggregation might not be
    enabled at the level required for this report."
    I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
    Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
    enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
    rani

    Hi Rani,
    The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
    Please enable this timer job and run the timer job to see how it works.
    More reference about this error:
    https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
    Thanks,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • My ICal data does not show up on Subscribers Calendar

    Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
    Any thoughts.
    Thanks Mark

    Thanks for the information.
    If you view the same calendar on the MobileMe website, do you see the events?
    http://ical.me.com/yourmembernamehere/calendarname
    If you don't see the events on the calendar web page then the publish did not go through succesffully.  Un-publish the calendar, make a slight change to its title, and then re-publish and test.
    If you do see the events on the website but still not in iCal on the 10.6.8 system:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Remove the subscription for iCal to that specific calendar.
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    4. Launch iCal and re-add the subscription.
    Hope that helps!

  • Created By and Created Date fields not showing up on Custom List form webpart

    Hi,
    I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
    <td width ="400px" valign= "top" class="ms-formbody">
    <xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
    </td>
    However these fields are not showing/populating data on the form ?? Any inputs ???
    Regards

    Hi,
    I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
    Hope it can help you.
    Xue-Mei Chang

  • Custom Date Field not showing up in Pages Inspector

    I created a custom date field in Address Book and now want to merge info from Address Book into a Pages template I created (including this new custom date field). When I go to the Inspector to add the custom date field to the template, it is not listed as a field - only Anniversary and Birthday are listed as "other" fields.
    How do I get the custom date field to show up in the inspector?
    Chris

    Question asked and responded several times.
    The Help is unaware of the true program behaviour.
    In version 3, custom AddressBook fields are not usable in Pages.
    _Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Yvan KOENIG (from FRANCE samedi 8 novembre 2008 18:13:21)

  • JavaScript in a Web template to hide or show a button

    Hi all,
    i got this task:
    i created a web template (Button Panel) with many buttons, behind each button there is another web template with its query, this second web template has a button to get back to the panel button,now, the user asked me the task of, when a user start from the panel button to another reports, show the button to return to the panel button,
    if the user start the second report from a link of the portal for example (this time the user doesnt start from the panel button) , the button to return to the panel button must be hide.
    i was studing this case, and the form is trough Cookies,  for example:
    if i start from the panel button, it must create a cookie A for example, when i click in some button, this other report must be read the cookie , if this is A , show the button to return to the panel, if not, so hide the button,
    soem of you have create something like this? some advices? another way? please help

    X

Maybe you are looking for