Web Analytics reports and not showing data
Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
reasons: (1) Web Analytics has not been enabled long enough to generate data;
(2) There is insufficient data to generate this report; (3) Data logging
required for this report might not be enabled; (4) Data aggregation might not be
enabled at the level required for this report."
I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
rani
Hi Rani,
The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
Please enable this timer job and run the timer job to see how it works.
More reference about this error:
https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
SharePoint 2013: A web analytics report is not available for this site.
Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paulhi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/ -
Report designer not showing data.
Hi Experts,
I have created a web-template in WAD and set it as default web-template for all the reports and queries, from the transaction RSCUSTV27, restarted the J2EE engine.
When I run a query from Query Designer is shows all the required data and the web-template format finely. But when I create a report in Report Designer using that query, it only shows the standard template for the reports, but not the data. Is it a issue with the Support Package? Or what? Please find me the way to resolve this problem.
Thanks in advance,
Niloy.Did you find a way to fix this issue - we are having the same problem.
Thank you!
Renee -
PLD Report does not show data from Query
Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
NickHi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty -
Report does not show data , but data exists in the cube.
Hi All,
I have a situation where I could not show the data in the report. When I load data from an extractor 0CO_OM_WBS_1 into a Cube directly I am able to show the data in my report. When I load the same extractor to a DSO and from the DSO when I load it into the Cube, the data does not show up in the query. To check the data I use the same restriction and could see the data reside in the cube (LISTCUBE). I compressed the requests, still it is not showing up in the query. No aggregates create on the cube.
It shows the data if I load directly from the extractor, but not when I load data thru DSO.
Any ideas.
Alex(Arthur Samson)Hi Alex,
I am facing same problem, i have data in cube but in report i cant see....
i have created a generic DS, i loaded the data to DSO then CUBE.
data is loaded succesfully and i can see data in CUBE ( Manage ), when i am running the repory i am not getting data.
i think you solve this issue... plz help me to resolve this issue.
Regards,
SHAIK. -
OBIEE 11g Report UI not showing data
Hi,
On Obiee 11g Report, the query hit by the report at the backend shows results for all the columns but on UI only few of these columns show the data. From Query log, when I run the same query in the database I see all columns have data which is somehow not showing up on the UI end. What could be the problem? Can this be resolved or is it a bug in the OBIEE 11g?
Regards
VMHi Vanaja M/Gurus,
Is that your problem resolved?
I'm facing same issue here.
I was checking for solution/suggestions in blogs, but unfortunately i couldn't find much information in blogs too....
Can you help me out to cross this hurdle, as this issue is in Production. -
Excise invoice is not saving and not showing datas
in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker -
Reports does not show data which contains HTML tags
Dear Gurus
Im trying to resolve this problem but im really stuck in it. I have the requirment to customize PO reports in R12 and at the end of every report we have to show its Terms and Conditions.I have the following query wich brings me the data i need.
SELECT
otu.document_number po_segment1,
otu.document_id,
otta.template_id,
otta.template_name,
otta.description,
otta.intent,
otta.status_code,
otta.start_date,
otta.end_date,
otta.instruction_text,
otu.document_type,
otu.document_number po_segment1,
otu.document_id po_header_id,
osb.HEADING titulo_seccion,
oav.display_name,
oav.article_text article_text
FROM
apps.okc_terms_templates_all otta,
apps.okc_template_usages otu,
apps.okc_k_articles_b okab,
apps.okc_sections_b osb,
apps.okc_articles_all oaa,
apps.okc_article_versions oav
WHERE otta.template_id = otu.template_id
AND otu.document_id = okab.document_id
AND osb.scn_id(+) = okab.scn_id
AND okab.article_version_id = oav.article_version_id
AND oaa.article_id = oav.article_id
AND otu.document_number='21000000111' -- Purchase Document
AND otu.DOCUMENT_TYPE NOT IN ('RFQ_RESPONSE', 'RFQ','RFI_RESPONSE','RFI','AUCTION_RESPONSE','AUCTION')
The problem is the field okc_article_versions.article_text storage data with HTML tags as an example : ''<P>COMPANY will make it’s best effort to provide an accurate forecast to CONTRACTOR, <B><I>at the end of every quarter,</I></B> however, a forecast in any form, shall not represent a firm commitment by COMPANY.,</P>"
So when i tried to show the information my .rtf template nothing comes out. Does anybody knows whats happenig and how to resolve it??
Please, resolve this issue is more than urgent an i guess somebody have the answe Thanks a lot
MilyHi ,
Currently image url have value http://serverip:port/reports/rwservlet
I don't know is this correct? Suggest What value it should have?
Thanks
Vinod -
No data in web analytics report after moving to new server
Hi,
I have a Sharepoint 2010 portal, we need to move that portal to a new server.
For this, I took the backup of the Web Analytics Reporting db and Staging db and restored them in the SQL of new server. Then, I created new Web Analytics Service Application on the new server with reference to the restored databases.
Now, when I go to check Web Analytics report, there is no data in it.
Is this because the url of my portal is now changed? Will I be able to get all my data when I change the AAM of new server to the old portal's url?
Kindly helpHi,
I wonder if Data exists starting from the date of finishing moving. If not, then please make sure Web Analytic is working in your environment.
You could also check ULS log for relevant error information.
Here is a similar issue for your reference:
http://sharepoint.stackexchange.com/questions/42881/web-analytics-in-central-admin-not-showing-all-data
More information:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://blogs.technet.com/b/manharsharma/archive/2012/10/13/sharepoint-2010-web-analytics-troubleshooting-reporting-db.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
SharePoint Foundation Site Web Analytics reports
Hi,
I am currently attempting to get the Site Web Analytics reports to work in SharePoint Foundation. However, there seems to be little available information regarding this. What is necessary for this to display a report? To start with, what
SharePoint & Windows services and SharePoint service applications need to be started? We use SQL Authentication for the content database because all the databases are in a different domain.
Any information someone can shed would be helpful.
Currently, when I navigate to the page it states "A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data for this site has not been processed yet." I have looked up this
information on the net, but nearly all information applies to SharePoint Server. I need help setting this up with SharePoint Foundation.
Thank you much.Hi Steven,
Ahhh, I had a feeling that was a problem.
I had similar issues after installing SP1 so I could have some of the new features, like the storage report back for sites, and deleted sites going into the recycle bin. However, I had read that I *had* to install the June 30 CU as well, which may have been
a mistake. Because after installing both and running a psconfigui, it made things as flaky as they were during the beta.
It took my good, stable, trustworthy and solid SPF install and made it unstable. Managed Accounts started acting weird, permissions were odd, BDC service crapped out, user code errors, the works. Bummed me out. I basically blew out the server, did a fresh
install and restored from a farm backup (actually a full then differential, gotta love scheduling backups). Mind you, I could afford to do that, and I simply don't mess around with bad updates.
(I also found a post that said that if you have SP1 installed, a common error is if you delete a list, then delete the site, you can restore the site from recycle bin, but the list that was deleted from that site earlier cannot be restored-- so to avoid/fix
that problem, install the August CU... it's always something...)
Do you have backups of your farm pre-updates, preferably both, but at least the CU? Maybe you can do a restore on a virtual machine to see if it fixes your issues?
Also, here's another question. After you installed SP1 and the August CU, did you do a psconfigUI.exe (or at the command line, psconfig.exe)? It might be good and bad that you didn't (if you didn't). The way to check to see if you didn't is check the database
statuses (review database status under Upgrade and Patch Management in Central Admin). The statuses will say that the databases can be/should be updated if you didn't run psconfig. That means that SharePoint has updated, but the databases in SQL haven't.
Maybe you can make a copy of those databases, and try to attach those databases to a pre-update (sp1 and CU) SharePoint Foundation server to see if web analytics work there again. Although, if I am understanding correctly, some changes can occur on databases
during updates, but they're not complete til psconfig is run. But hey, it's worth a shot.
Or you can use psconfigui.exe (or psconfig.exe if you want to use the command line) to update the databases and see if that fixes the problem.
I'm sorry again about your issues if they are update related. It is so frustrating to think you are trying to stay up to date on your server, being a good admin, and instead it breaks important things without apology or way to fix it (since cumulative updates
cannot be uninstalled, but it is really difficult and potentially expensive to have to fully identical farms running side by side for testing).CA Callahan | Author: Mastering Windows SharePoint Service 3.0 and Mastering Microsoft SharePoint Foundation 2010 | Community Launch Leader | -
I am trying to get the Web Analytics reports to run, and have the Microsoft
SharePoint Foundation Site Inventory Usage Collection , Microsoft
SharePoint Foundation Usage Data Import , and Microsoft
SharePoint Foundation Usage Data Processing jobs are all running, yet I don't get any web analytics reports to run. I get a message that says A web analytics report is
not available for this site. Usage processing may be disabled on this server or
the usage data for this site has not been processed yet.
What else to I have to configure to start getting these reports to run?Hello Matt,
Brian Pendergrass has written a nice blog to troubleshoot Web Analytics problems, maybe this helps:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
- Dennis | Netherlands | Blog |
Twitter -
SharePoint 2010 Web Analytics Reports Not Displaying Data
Hi,
I'm currently having some issue with the Web Analytics Reports. It had been working fine for the past 1 year and suddenly a few months back, the Web Analytics is not showing any data. Have already troubleshoot the issue using the
Troubleshooting SharePoint 2010 Web Analytics Article and all values show the correct date and time.
Therefore, I have performed a more in-depth analysis and found out that the WAHierarchyData table in the Reporting Database only have Root ID
I have verified with a working SharePoint environment and the table should contain all the SharePoint site ID. Also, I have looked into all the SharePoint and Windows logs and all found to be showing the services to be running normally. I would like to check
if there is a way to restore the data in this table or is there any other ways I can trace and troubleshoot this issue.
Background information
SharePoint Version: Service Pack 2
SQL Server: Cluster Environment
3vild3vilHi,
I queried the WAHierarchyData table in my environment, and there should be id column in returning result.
You could manually run timer job related to Web Analytics service application and check ULS log for error message.
To narrow down the root cause, we need query SharePoint database tables and compare query result, which might exceed the supported scenario. I'd recommend you open a ticket with MS support, they could reach your envrionment and troubleshoot the issue for
you. For your convenience:
https://support.microsoft.com/contactus
Thanks for the support.
Regards,
Rebecca Tu
TechNet Community Support -
Site web analytics report shows no data
Hi All,
A user reported that they could not view the site web analytics report
in the SharePoint 2013 production server. It was working fine a few couple of weeks back though.
I started the troubleshooting for this issue and came cross a few blogs that details the same issue.
There were my steps:
In Central Admin (CA) >> Service Applications >> Usage and Health data collection was
started.
CA >>
Monitoring >> Reporting >> "Enable usage and health data collection"
was checked.
CA >> Monitoring >> Timer Jobs > Review job definitions
>> Microsoft SharePoint Foundation Usage Data Import
(5 minutes) and Microsoft SharePoint Foundation Usage Data Processing
was enabled. I clicked on "Run Now" on these job schedules.
CA >> Search Service Application >>
Under Mange Content Sources page
the status was Idle.
We have performed the full crawl a few days back.
PowerShell: Read the Brian
T. Jackett's blog. Basically, he uses PowerShell to trigger the Receivers
for the AnalyticsUsage and PageRequest
and enable these Receivers for Analytics and Page Requests. In the
production environment these receivers were already defined and I just executed them again. Ran the
OWSTimer service for all SharePoint servers. However, after 2 days no data was shown.
The only thing we have not checked is WSS_Logging database.
We are stuck in this issue and its OOTB feature.
Any pointers for this issue will be highly appreciated.
Thanks in advance.
Regards,
Aroh
Aroh ShuklaHi Aroh,
Please refer to the article:
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VNcSsf4fqM8
There are still some place you could check for general troubleshooting steps, such as:
1.Did you configure AAM recently that might affect this?
2.Does related timer jobs run successfully?
Regards,
Rebecca Tu
TechNet Community Support -
Number of Page View is showing zero for Site web Analytics Reports
Hi,
We have enabled Site Web Analytics reports in our Site Collection but the Number of Page views is showing zero for all the dates. We have checked all the events to capture in Site Collection Audit settings, Reporting feature is also activated but still the
count shows 0 for all the dates.
There are other Site Collection that exists under that Web Application but they show the count for Number of Page views in Site.
Any help would be appreciated.
Regards,
Vijayhi
1-first check "Usage and Health Data Collection Proxy" is started, if not started:
find usage proxy id with following command:
Get-SPServiceApplicationProxy
then start service with following command:
$UsageApp = Get-SPServiceApplicationProxy | Where {$_.ID -eq "[usage proxy ID]"}
$UsageApp.Provision()
2-check following link:
Popularity Trends populating 0 results
yaşamak bir eylemdir -
No data with Web Analytics Reports - SharePoint 2013
Hello,
I have data when I click on the Web analytics reports. I am using SharePoint 2013, but with sites with the SharePoint 2010 visual interface.
What are some of the things to look for to get these working?
I have Reports feature enabled at the site collection level.
I have enabled usage data collection and have scheduled it.
What is the SharePoint job to check to ensure that it is running.
What is the permissions to use for the Logging database and the log folder?
Thanks.
PaulTake a look at http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
to see if it explains what you're looking for (essentially, Web Analytics is no longer available).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
DVD-Audio player does not detect any DVD-Audio sour
Hi, I am trying to play a DVD-Audio disc on my computer using the DVD-Audio player software that came with my Audigy 2 card, but the software fails to detect my DVD-ROM dri've as a DVD-Audio source. I can play audio CDs and DVDs with no problems usin
-
Since I upgraded to Mavericks, my Maxtor external Hard drive does not work. It is FireWire to Thunderbolt . When I connect it it crashes. What Gives ?j
-
Running Leopard on one partition and Tiger on another partition?
I have recently purchased a family pack of Leopard, and I am reading up on a lot of the posts, here, before I venture the installation on two machines. I intend to install Leopard one machine at a time and give a few weeks between installations. One
-
Develop a program on pocket PC
Hello I'm develop a program on pocket pc. I think i'll use j2me to develop one. But I don't have any exp on pocket pc or j2me on it. Q. Can Java run on pocket pc? If yes,what is the requirements?(addition d/l or setup any program?) Q. I had an exp on
-
TS1306 "iPod cannot be synced. Required file could not be found." Help!
With a recent update to Itunes I am continuing to recive this error notice; "iPod cannot be synced. Required file could not be found.". After trying everything and I mean everything, it still will not sync. Any help would be appreciatted.