Web Tools Code missing under TABLES (Sync Manager)

Hello Experts,
I have recently did my testing on the Sbo_Demo Database.
I felt it was time for me to graduate and move on to the real data.
So i changed the database in SYNC manager to the one i would like to use.
Once i did this i started setting up my B2C Business partner and everything else needed for a successful sync.
i noticed an error stating PRX _ fields were missing. I figured i would start the procedure over using the document to successfuly uninstal any traces of WEBTOOLS.
So i started up a fresh install of web tools all seemed to go fine i setup my database when i went to sync manager under tables my WEB TOOLS CODE COLUMN was missing, in short my PRX_Fields were never constructed. i followed the removal process step by step from the included documents section page 13 " Removing the application"
Does anyone know what i am doing wrong? i thought the PRX files were created automattically with the webtools installer or sync manger
neither seem to be doing so.
Thank you very much for you time

Hello Sebastiano,
These columns are created by clicking "Install Plugin" on the first screen of the isynch manager. It is necessary to run this function every time you switch SBO databases. Also it is necessary to enter codes on the tables and click on the "Initialize Synch" button on the synchronization screen. This clears the webtools db of data from your previous SBO db. I believe this is covered in the installer guide.
Good luck,
James

Similar Messages

  • Hi showing conpany code missing in table t43s

    hi 
    when i  make  process open items  its showing     company code  missing table t43s
    can any give valuable  point
    thanks
    raju

    Hi,
    The table T043S contains Tolerances for Groups of G/L Accounts, you need to provide Tolerances for GL Accounts. The path is:
    SPRO - GL Accounting - Business Transactions - Open Item clearing - Clearing Differences - Define Tolerances for Groups of G/L Accounts.
    Assign Points if useful
    Regards
    Ravindra

  • Export/import tools is missing under tools in my recent downloaded Thunderbird, Where do I find it?

    On my computer 1 in Thunderbird tool bar I scroll down Tool menu and the last post is Import/export tool. When I am now installing Thunderbird in my Computer 2 and look at Tool menu the last post is "Alternativ" the Import/export tool is missing. How do I do to get it on this menu.
    Both computer has the same version 31.6.0
    Please advice

    Thank you very much! Yes now I remember that I downloaded the import/export tool from the page you adviced. Now I have it on my other computer as well.
    Thanks and have a nice weekend

  • Creating Z t code, missing T180 table.

    Hi Gurus,
    I have tried to create my own t code i.e. ZVA01 using t code of SE93, i have input all the fields and checked GUI relevant as well. still not able to create own t code.
    When i have gone to ZVA01, giving error i.e T180 table is missing.
    Please help me the complete process steps involved in this.
    Thanks & Regards,
    Vamsi.

    hi
    goto tcode SM30 and enter the table name as T180 and maintain the entries there
    regards

  • Invalid views with missing underlying tables

    I have completed an import from one database, 8i version, to a new 10g database and in the process of the import a view was imported in the SYS schema. The table being accessed by the view has since been dropped during another import and now the view is listed as invalid but I am unable to delete the view. Since the import was completed 3 times this view appears 3 times as invalid. When I try to edit the view and include a valid select statement it will recompile but the invalid view still remains.
    Does anyone have an idea how to remove these 3 invalid views?
    Chicago

    Does anyone have an idea how to remove these 3 invalid views?
    select 'Drop view '||  object_name || ';' from dba_objects where object_name='VIEW_NAME' and object_type='VIEW' and status='INVALID'
    and OWNER=<OWNER where INVALID VIEW EXISTS';and execute the script.

  • Custom Sync Plugin Sample for Web Tools 2007

    Hello,
    Does anyone have a sample Custom Sync Plugin that works for Web Tools 2007?  I have been unable to get the sample provided working, actually cannot even compile it, and was just curious if there was a simple sample that worked that I could use as my base.  Please let me know.
    Thank you,
    Kristen

    Hi Shawn,
    Yes, I am using Visual Studio 2005 Professional with the .Net 2.0 framework and 2007.  However, most of the methods are not there, and things seem to have changed drastically, however the sample is still referencing the old.  Is there something that I am missing?
    Please let me know.
    Thanks,
    Kristen

  • Photoshop submenu is missing under tools menu in bridge

    I Have downloaded the new Photoshop CC 2014 and updated Bridge. Trying to send some pictures from Bridge to photoshop as layers is not possible because the photoshop submenu is not available under tools.
    Checking Bridge preferences > start up, does not show Photoshop.
    Checking Library> Adobe > BridgeCC > start up, does not have Photoshop in it.
    Can somebody help me restore the Photoshop submenu.
    Thanks
    Rene. 

    Today when I start Bridge it had a message asking if I want to install a "Photoshop extension”.
    So my problem is solved.
    Thanks.
    René Born 
    [email protected]
    El 22-06-2014, a las 14:58, DavyAllan <[email protected]> escribió:
    Photoshop submenu is missing under tools menu in bridge
    created by DavyAllan in Adobe Creative Cloud - View the full discussion
    I have the same problem when trying to do a photomerge.
    Work around by opening files than doing 'add open files'
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6484656#6484656
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • WebTools Sync - Orders from Web Tools to B1

    Hi everyone,
    Hopefully this is a simple question...  What is the proper way to sync an Order from Web Tools to B1?  I have a few fields that I want to update and cannot find an object type to set it to that will sync for orders.  The sample says that you should use WebToolsUsers for BP's, but there is no WebToolsOrders for Orders.  What is the proper object type that I should use.
    Thanks so much for your time!
    Kristen

    In 2007 you don't need to worry about getting the queue.  The synch takes care of this for you.
    The WebToolsToB1() method will be called for every order in queue, you need to use the qData object passed in to get the data you need.
    public override void WebToolsToB1(NetPoint.SynchSBO.framework.NPQueueObject qData) {
                if (qData.TranType == TransactionType.Add ||
                    qData.TranType == TransactionType.Update) {
                    NPOrder o = new NPOrder(Convert.ToInt32(qData.KeyFieldValues[0]), NPConn, NPSecurityTicket.PrivateKey);
                    // your stuff

  • Sync Manager missing a few files. Anyone know w

    I have the sync manager set up to sync whenever I connect my device and for some reason it is?8 files short out of 3320. Any ideas?Zen Vision:M 30gbnewest firmware and software.All files in one folder with many subfoldersMessage Edited by jayson on 08-20-200703:50 AM

  • SQL functions in TOOL code

     

    In my original email I should have made the point clear that an indexed
    column was required, that led to some confusion, apologies.
    Under Oracle 7 even if the column is indexed the query engine still does a
    full scan of the index to find the maximum or minimum value. As strange as
    this seems it is possible to view it using the Oracle trace functions such
    as tkprof. This method is quicker than not having an index but the cursor
    method is far more efficient.
    When using a cursor based approach Oracle will go straight to the first
    record of the index (depending on MAX or MIN) and retrieve the data. By
    exiting at that point the function has been performed and the I/O operations
    are extremely low compared to a full index scan.
    Of course there is a trade off depending on the amount of rows but for large
    indexed tables the cursor approach will be far faster than the normal
    functions. I'm not sure how other RDBMS's handle MAX/MIN but this has been
    my experience with Oracle. This process may be faster still by using PL/SQL
    but then you are incorporating specific database languages which is
    obviously a problem if you port to a different RDBMS. Here is some code you
    can try for Oracle PL/SQL functions:
    declare
    cursor myCur1 is
    select number_field
    from number_table
    order by number_field desc;
    begin
    open myCur1;
    fetch myCur1 into :max_val;
    close myCur1;
    end;
    I hope this clarifies things a bit more. If in doubt of the execution plan
    of a performance critical query use the database trace functions as they
    show up all sorts of surprises. MAX and MIN are easy to understand when
    viewing code but perform poorly under Oracle, whether v8 behaves differently
    I have yet to discover.
    Cheers,
    Dylan.
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Thursday, 7 January 1999 3:37
    To: [email protected]
    Subject: RE: SQL functions in TOOL code
    I guess my point is that MAX can always be implemented more
    efficiently than the SORT/ORDER-BY approach (but may not be the
    case, depending on the RDBMS). If an ORDER-BY
    can use an index (which means that the indexing mechanism involves
    a sorted collection rather than an unordered hashtable) so can
    MAX - in which case finding a MAX value could be implemented
    in either O(1) or O(logn) time, depending on the implementation.
    The last sentence being the major point of this whole discussion,
    which is that your mileage may vary depending on the RDBMS - so
    try using both approaches if performance is a problem.
    In terms of maintenance, MAX is the much more intuitive approach
    (In My Opinion, of course), since a programmer can tell right away
    what the code is attempting to do.
    Chad Stansbury
    BORN Information Services, Inc.
    -----Original Message-----
    From: [email protected]
    To: [email protected]; [email protected]; [email protected]
    Sent: 1/6/99 10:45 AM
    Subject: RE: SQL functions in TOOL code
    Well, yes, but in that specific case (looking for max() value) would not
    be
    true that, if you have an index (and only then) on that specific column
    some
    databases (like Oracle) will be smart enough to use index and find max
    value
    without full table scan and without using order by clause?
    Dariusz Rakowicz
    Consultant
    BORN Information Services (http://www.born.com)
    8101 E. Prentice Ave, Suite 310
    Englewood, CO 80111
    303-846-8273
    [email protected]
    -----Original Message-----
    From: Sycamore [SMTP:[email protected]]
    Sent: Wednesday, January 06, 1999 10:29 AM
    To: [email protected]; [email protected]
    Subject: Re: SQL functions in TOOL code
    If (and only if) an index exists on the exact columns in the ORDER BY
    clause, some databases are smart enough to traverse the index (inforward
    or
    reverse order) instead of doing a table scan followed by a sort.
    If there is no appropriate index, you always end up with some kind ofsort
    step.
    Of course this is all highly schema- and database-dependent, so youmust
    weigh those factors when deciding to exploit this behavior.
    Kevin Klein
    Sycamore Group, LLC
    Milwaukee
    -----Original Message-----
    From: [email protected] <[email protected]>
    To: [email protected] <[email protected]>
    Date: Wednesday, January 06, 1999 9:40 AM
    Subject: RE: SQL functions in TOOL code
    This seems a bit counter-intuitive to me... primarily due to
    the fact that both MAX and ORDER-BY functionality would require
    a full table scan on the given column... no? However, I would
    think that a MAX can be implemented more efficiently since it
    just requires the max value in a given set (which can be performed
    in O(n) time on an unordered set) versus an ORDER-BY (sort)
    performance on an unordered set of at best O(nlogn) time.
    Am I missing something? Please set me straight on this 'un.
    Chad Stansbury
    BORN Information Services, Inc.
    -----Original Message-----
    From: Jones, Dylan
    To: 'Vuong, Van'
    Cc: [email protected]
    Sent: 1/5/99 4:42 PM
    Subject: RE: SQL functions in TOOL code
    Hi Van,
    Operating a function such as MAX or MIN is possible as given in your
    example
    but it is worth pointing out the performance overhead with such a
    method.
    When you use MAX, Oracle will do a full table scan of the column so
    if
    you
    have a great many rows it is very inefficient.
    In this case use a cursor based approach and depending on your
    requirments
    (MAX/MIN) use a descending or ascending ORDER BY clause.
    eg.
    begin transaction
    for ( aDate : SomeDateDomain ) in
    sql select DATE_FIELD
    from DATE_TABLE
    order by
    DATE_FIELD DESC
    on session MySessionSO
    do
    found = TRUE;
    aLatestDate.SetValue(aDate);
    // Only bother about the first record
    exit;
    end for;
    end transaction;
    On very large tables the performance increases with the above method
    will be
    considerable so it is worth considering which method to use whensizing
    your
    database and writing your code.
    Cheers,
    Dylan.
    -----Original Message-----
    From: Vuong, Van [mailto:[email protected]]
    Sent: Tuesday, 5 January 1999 6:50
    To: [email protected]
    Subject: SQL functions in TOOL code
    Is it possible to execute a SQL function from TOOL code?
    For example:
    SQL SELECT Max(Version) INTO :MyVersion
    FROM Template_Design
    WHERE Template_Name = :TemplateName
    ON SESSION MySession;
    The function in this example is MAX().
    I am connected to an Oracle database.
    Thanks,
    Van Vuong
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
    >
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Error F5100 - The entry FR 3 A1 is missing in table 021T

    Hi all;
      We have an error message when log on in French and try to run transaction F-44. After update Vendor Account, Company Code and click on the button "Process Open Itens" the system returns an error message F5100 - "The entry FR 3 A1 is missing in table 021T."
    It is only happen when we log in French. Error message in French: "Dans la table 021T, il manque l'entrée FR 3 A1".
    Can you help?
    Thanks in Advance!
    Gustavo

    Hi Gustavo
    Please refer to instructions in note 75750 to solve the incident.
    Cause and prerequisites                                               
    Customizing error:                                                    
    The user usually logs on to the R/3 System in a language other than   
    English. For the language English, the user has not maintained any line
    layout variants under 'Financial accounting editing options: Document 
    entry' (Transaction: FB00).                                                                               
    Solution                                                              
    After you have logged on in English, maintain the 'financial accounting
    editing option: ...' by means of Transaction FB00.                    
    Maintain the line layout variants for:                                
    - Document entry                                                      
    - Open items                                                          
    - Line items                                                          
    Example:                                                              
    - 'Open items':  Line layout variants                                 
                    (for example: A1, A1, A1, Z1, P1 or such like)        
    - 'Document entry': Line layout variants                              
                    (for example: AA, STD)                                
    - 'Line items': Line layout variants                                  
                    (for example: B3, A1)                                 
    - 'Payment advice notes': .... (SAP01, A1)                            
    - 'Credit management': .... (ST1, S01).                               
    Hope it helps
    Kind Regards
    davide

  • Service Orders not displayed in Web Tools

    Hello everyone,
    We are creating Service Type Orders within B1 and they are syncing over to Web Tools just fine, however they are not displayed on the Order History page for the user.  Is that 'as designed'?  I know there is no traditional information that can be displayed about these, but was just curious how these should be viewed if at all within WebTools or if I should create custom development for this.  Any thoughts are greatly appreciated.  FYI, we are using Web Tools 2007 PL 01.
    Thanks,
    Kristen

    Hi Bryce,
    I am talking about orders of type 'Service' versus 'Item'.  So, it is just a Service Order, for a dollar amount to a G/L Account, rather than having a list of items.  These are shown in the Web Tools tables, but are not displayed to the user.  Just curious if they were designed to or not.  Please let me know if that makes sense.
    Thanks,
    Kristen

  • Patch 5 for Web tools 2007 released (2007.625)

    To download go to the Software Download Center [http://service.sap.com/sbo-swcenter|http://service.sap.com/sbo-swcenter]
    -> SAP Business One Products
    ->Updates
    -> Choose B1 Version(2005A or 2007A)
    -> SAP B1 Web tools Server 2007
    -> Win32
    -> Click Download Tab
    ->B12007WEBTOOLS00_05-20001835.ZIP
    Fixes include:
    Number    Short text
    1147013   B1 Delivery based on WT order does not synchronize to WT
    1146979   Set DB sever type to MSSQL 2005 for Synch Plugin
    1145100   Prospect can be added to mailing list several times
    1141368   Discount (coupon) refactoring
    1141362   SynchManager does not function properly with .NET 3.5
    1141309   Small improvements to synch manager
    1141307   It was possible to modify saved delivery
    1141306   Malfunctioning paging navigator (Coupons -> Audit)
    1141301   Search returns wrong icon on variant item
    1141246   Problem with creation of support queues hierarchy
    1141245   Task Status and Priority have no values
    1141208   Parent Category entry lost during Category creation
    1141205   Incorrect synchronization of 'End Date' (activities)
    1141202   Tasks (activities) created in WT cannot be synchronized
    1141119   SiteMapNodes error during upgrade from 5.9
    1141116   To lock an Order causes internal error if CC Gateway is set
    1141115   Manager of support queue should be required
    1140909   object_type in PRX_Transaction_Queue shouldbe nvarchar(20)
    1140906   Selected prospect's activities are not deleted on merging
    1140904   Ignore option on address merge does not work
    1140903   Quote expiration date defined by user is ignored
    1140760   Order without payment method can be created
    1140758   Payment method 'COD' with account number
    1140757   Add support of SkipJack CC Gateway in WT 2007 SP0
    1140755   Orders are synchronizd to B1 twice
    1140676   Address & user can be synchronized to multiple BPs
    1140675   Industry defined in WT & assigned to BP causes synch.error
    1140123   Problem adding language strings for opportunity stage
    1140122   Static page has wrong save functionality

    Download the new install file from the Service Market Place
    Stop the 'SAP Business One WebTools MessagingService' in Administrative Tools > Services
    Stop Synch Windows Service 'SAP Business Synch Service' in Administrative Tools > Services OR in WebTools Synch Manager > Windows Service
    Remove Synch Windows Service by going to WebTools Synch Manager > Windows Service > Click Remove Service
    Goto Start > Settings > Control Panel > Add or Remove Programs > remove SAP WebTools 2007
    Run setup.exe from the downloaded patch
    Choose to install Installer or Synchmanager or both > Click on Next
    Launch WebTools Installer which should be on your desktop now
    Choose Instance. Select the instance you wish to upgrade (this is the database your webpage is connected to)
    Select Upgrade Selected Instance
    Click Finish to start the upgrade
    Wait until green bar has completed and then select Finish
    Start SAP Business One WebTools Messaging Service in Administrative Tools > Services
    Launch WebTools Synch Manager
    Install Synch Service and it will start automatically. To do this go to WebTools Synch Manager > Windows Service > Click Install Service
    Upgrade to the latest patch is now complete

  • Java script code missing' comes up in a window when I try to batch process my images in photoshop.

    I have an imac version 10.9.4, Photoshop cs5.1. I'll select file-script-image processor and that is when the 'java script code missing' pops up. It used to work before I upgraded to the version 10.9.4. I called Apple and they don't know what to do. Now I'm here on the community site hoping someone can help. Not being computer savvy I don't understand anything I try to read about it.

    I finally found out that my 'McAfee SiteAdvisor' add-on was causing the problem for me. You can either disable it from your add-ons by clicking on tools, then add-ons and then disable it from your list of add-ons, or if you still wish to use it like I do, you can unistall it from your add-on list, and then download it from the official McAfee web site and then simply reinstall it... Since I've done this my firefox been loading faster, no annoying pop-up window when I launch or open a new tab. It was also crashing quiet often before I did this and that seemed to be fixed now.
    here is the link for the McAfee SiteAdvisor download from the official McAfee web site if anyone needs to download it again like I had to.
    http://us.mcafee.com/root/product.asp?productid=sa

  • Cannot access Admin Web Tool !!! need suggestion!

    i did install OSB on the DB 11g machine which is running Win 2008 Server.
    All services are up and running the only problem is that I can not got to Web Tool.
    Inte observiced log file I have next event:
    Copyright (c) 1992, 2007, Oracle. All rights reserved. on son-orcl1 (domain my_domain) pid 1948
    2009/05/05.20:13:21 installed as server
    2009/05/05.20:13:21 listening for requests on my_ip (my_ip) port 400
    2009/05/05.20:13:21 note: this machine is an administrative server
    2009/05/05.20:13:21 obhttpd started in pid 440
    2009/05/05.20:13:21 note: obscheduled listening on my_ip (my_ip) port 49536
    2009/05/05.20:13:22 obproxyd started in pid 12
    2009/05/05.20:13:22 listening for NDMP connections on my_ip (my_ip) port 10000
    *2009/05/05.20:13:25 obhttpd -D SSL -d "C:/Program Files/Oracle/Backup/apache" pid 440 exited with code 0x20008F06, value 1*
    P.S. obtool is running, so I am able to connect using this tool.

    I found the source of proble....but cannot find solution
    [06/May/2009 09:40:37 00440] [warn] You are using mod_ssl under Win32. This combination is NOT officially supported. Use it at your own risk!
    [06/May/2009 09:40:37 00440] [error] Init: Pass phrase incorrect (OpenSSL library error follows)
    [06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
    [06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
    [06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
    [06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib

Maybe you are looking for