WebCamera How to set display name

It' possible to setup a display name different from the name on LCCS?
I have OWNER on LCCS but I want display my name.
(I don't wont change the name on LCCS)

Hi,
There is no direct way of changing the name in LCCS because it takes the name from your user descriptor and shows it.
If you want to show your custom name, what you can do is subclass the WebcamSubscriber's layoutCameraStreams() function and in that look for the line
cBar.cameraUserLabel = ud.displayName;
You may want to change that line by setting something of your own.
Hope this helps
Thanks
Hironmay Basu

Similar Messages

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

Can someone tell me how to set my name so when I send a text it shows up instead of my phone number

You can't do that. Only the sending number is transmitted by the carrier with an SMS message. If the recipient has you in their address book, with most smart phones and some others, the name will display, but that's a function of the phone on the receiving end.

How to set display size of a Region or Dynamic Region?

Hi,experts,
In jdev 11.1.2.3,
I drag and drop a task-flow into a jsf page to create a Region,
and set display size for the region, source code as:
===================
<f:facet name="second">
<af:decorativeBox theme="medium" id="db1">
<f:facet name="center">
<af:panelGroupLayout layout="scroll" id="pgl1"
inlineStyle="width:1200px;height:700px;">
<af:region value="#{bindings.trainflow11.regionModel}" id="r1"
inlineStyle="width:1200px;height:700px;"/>
</af:panelGroupLayout>
</f:facet>
</af:decorativeBox>
</f:facet>
=================
But, the Region is only showed a small fraction area on the parent jsf page whenever during design or run time.
How to set display size of a Region or Dynamic Region?
Thanks!

Hi,
the decorative box is supposed to stretch components in the center facet, so at runtime the region should stretch. Can you try with a static region to see if this is an issue with dynamic regions?
Frank

How to set dynamic name of the mail attachment according to source file ?

Hi,gurus:
Our scenario is like below:
Sending files from an FTP server to another FTP server without using the integraiton repositary,and the file name is not changed .Now, we want to also send the file to some with by mail adapter.The scenario now works by using two business services in receiver determination.But the name of the attachment is "untitled.xml".We know how to set the file name staticly,but how to set the name dynamicly according to the source file name ?
I have checked miachel's blog "XI: Dynamic name in the mail attachment - pseudo "variable substitution"(/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution),but how can I get the source file name?
And another question:Must we restart the adapter or j2ee engine to make the user defined module work?

Hi,
>>>but how can I get the source file name?
form dynamicconfiguration (ASMA)
>>>And another question:Must we restart the adapter or j2ee engine to make the user defined module work?
no need for a restart
Regards,
Michal Krawczyk

How to set group name as default value in People Picker in Infopath 2010

How to set group name (shareoint Groupname) as default value in People Picker in Infopath 2010

Under the Developer tab in Infopath you can manage Loading Events, unfortunetly i dont have Visual Studio on this PC so i cant laborate, but i believe it's rather simple to figure out.
Edit: Found a easier way, through Data > Default Values.

How to set Alias name for URL or change URL..

Hi:
I am using Apache Tomcat as web server, it contains multiple web applications.
Url for one of this application is, e.g. http://localhost:8080/myapplication. This particular url work fine.
But i want to use only mypage word instead of all the above url.
So how to set or map this?
Thank You,
Anup Desai.

Thank you.
I tried to set the displayname (using setPersonal function)
Still its not working.
I feel it is because during authentication we give the login name (which is taken as the display name).
Is there any way to change without touching configuration level properties in exchange server 2007.
thanks in advance

Script to set display name in iCS Calendar view to the LDAP CN

Script to set the display name in the Calendar view for iPlanet Calendar
Server(iCS) to the LDAP common name(CN)
By default, iCS uses a user ID(uid) based on an employee number, rather than on
an employee's first and last name, as the calendar ID(calid).
The current release of iCS (5.0 P2) does not create a display name for a
calendar when a user enables a calendar by logging in; by default, it will
list the calid again in the Display Name field of the Calendar view.
For example, if an employee has a calid of "12345," when you click the
Calendar tab to view the calendar, the Display Name will appear as follows:

12345 (12345)

A problem arises when a user tries to subscribe to another user's calendar.
Although the search criteria are based on the calid and the Display
Name, the only information currently stored in the calendar database is the
calid. Therefore, users will be unable to subscribe to another
user's calendar unless they know the calid of that person. The next
patch release for iCS will remedy this problem by using common names(CNs) as
the Display Names. That is, the database will store the CN values
from LDAP for users, and the Calendar view will appear something as follows:

12345 (John Doe)

Until this next release of iCS, there are two options to work around this
problem.

<OL>
<LI>You can "provision" users by running the cscal
administrative utility with the
Display Name option.

OR

<LI>If the user community already exists, you can use the sample Perl script
below to search through the calendars of users.

Note: If a default calid exists that doesn't have a Display Name, the script
will search the LDAP directory to find a CN to set as the Display Name for
that calendar.
</OL>

<HR>

Sample Perl Script:
#!/bin/perl5.004
sub TRUE {1}
sub FALSE {"}
$SIG{INT} = 'handler';
$SIG{QUIT} = 'handler';
$mypath = $ENV{'LD_LIBRARY_PATH'};
$savepath = $mypath;
$ENV{'LD_LIBRARY_PATH'} = $mypath.';.';
#--------------INITIALIZATION----------------
$host="ldaphost";
$base_dn="ou=People,o=iplanet.com";
$port=389;
$auth_dn="cn=Directory Manager";
$auth_pwd="password";
$found_confile = TRUE;
$default_cal = FALSE;
open(CSCAL,"./cscal -v list |");
while($cal_list = <CSCAL>)
if ($cal_list =~ m/: owner=/)
@calid = split(' ',$cal_list);
chop($calid[0]);
print "\ncalid: $calid[0] ... ";
$default_cal = TRUE if ($calid[0] !~ m/:/);
} elsif (($default_cal) && ($cal_list =~ m/^ name=([a-zA-Z ]*)/)) {
chomp($1);
print "cal name: $1";
if (($1 EQ ") || ($1 EQ $calid[0]))
open(LDAPSEA,"./ldapsearch -h $host -p $port -b \"$base_dn\" -D
\"$auth_dn\" -w \"$auth_pwd\" uid=$calid[0] |");
while($ldap_list = <LDAPSEA> )
if ($ldap_list =~ m/^cn: ([a-zA-Z ]*)/)
chomp($1);
`./cscal -n "$1" modify $calid[0]`;
print "The display name for $calid[0] is being modified to be: $1\n";
sleep(1);
close(LDAPSEA);
$default_cal = FALSE;
close(CSCAL);
sub handler
local($sig) = @_;
print "... Caught a SIG$sig--closing down shop\n";
close(CSCAL);
close(LDAPSEA);
exit(0);
}

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

How to change display name in iMessage?

My son has an iPod that's using iMessage to text. When he text to my phone, it has my name as the display name and not his. How can I change this so it can display his name instead of mine?
I am using my iCloud account on this iPod, not sure if it has anything to do with it.

Very easy
Do you mean you want their name to display when you ipad imessages your iphone?
2 ways to do it
You can either add another contact and call it iPad Message for instance and just add your iMessage email in there.
Or
If its another persons phone they simply need to add the same email address into your contact on their phone.
I dont think its possible to not display your email address mind you if you are not already added at all in their contacts, i.e if you're imessaging an aquantaince and not a close friend via iMessage.
iMessage i designed for more personal use between friends and family unless you dont mind sharing your email address.
Why not just add another email address in iMessage to use if you're worried?

How to set the name for an 'unknown' file extension?

Specifics:
I have various file extensions that are recognized by my mac. I would like to know how to create a list of applications that can open it so I do not get a 'There is no Default Application to open this file' error. I would also like to be able to give these file extensions names recognized by the mac.
Just like .txt is a "Textedit Document" and .html is a "HTML Document," I'd like to be able to change the name and assosication of a file and give it its own .icns if possible.
As for the default applications, I know how to set a default application. However, if a mac does not recognize a file extension, adding a new default application to run the file wil actually erase the old one, which is a big pain, especially when your file can be opened with ANY text editor.
I understand that this may involve hacking into the operating system's databases, but if anyone can help, it would be greatly appreciated.

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

How to set displayed column width for a search help

I have created an elementary search help for a custom field with a value table behind it.
The search help functions correctly, but when displayed the column widths are all 10 characters. The user has to adjust the column to view the descriptive text.
Can anyone tell me how to set default column widths for the help?

Please open you Elementary search help and see the Column width behind the Fields of your ...there increase the width of the fields
"Activate it and refresh
reward points if it is usefull .....
Girish

Setting Display Name for sent emails

Hi All,
I want to set a display name for sent emails. For example: when I send emails using [email protected] and after receivign this amil in my inbox it says from [email protected] Is there any way that I can show display name for this like Kartik <[email protected]>.
is there any API by which I can set this display name? Or this has to be done on mail server?
Any help would be appreciated!!
Thanks, Kartik

it asks for a attribute messageFrom and passes it to SMTPTransport. I have tried setting different values for messageFrom like
messageFrom=Test Email
messageFrom="Test Email"
but it didn't work for me. it expects a domain name there (even if its dummy) like
messageFrom=[email protected]
Can you tell me at which place InternetAddress is been called by SMTPTransport so that I can write my own impl for it.

How to set Workstation Name on Solaris 10?

Hi.
I have problems with setting workstation name.
I tryed to do it with Management Console, but system crashed, because there was missmatch between the name in few files. So I installed Solaris 10 again.
How to change workstation name?
Thank you.

Thank you.
There are two /etc/hostname files, they are empty: hostname and hostname6.
/etc/hosts has what I need to change.
I was unable to find /etc/nodename.
Will it work, if I'll change only /etc/hosts and make "hostname <new hostname>"?
In previous time when my system crashed, I changed: /etc/hosts, but it didn't work.

How to set column names when not using object of row data in constructer

hello i am using JTable constructer as
public JTable(int numRows,
int numColumns)
can i set column names for the columns .How?

hi,
sure you can: Create a subclass of DefaultTableModel and overwrite the method public String getColumnName(int) which returns the column name of a specific column. Then use this subclass as the data model for the table.
best regards, Michael

JList: how a set a "name" and "value" for a element

my JList
DefaultListModel listMBuddy;
JList listBuddy;
listMBuddy = new DefaultListModel();
listBuddy = new JList(listMBuddy);
listMBuddy.insertElementAt("buddy name 1", listMBuddy.size());
listMBuddy.insertElementAt("buddy name 2", listMBuddy.size());
listMBuddy.insertElementAt("buddy name 3", listMBuddy.size());a string "buddy name 1" will be show in JList, it is like a name of element.
how i set value for "buddy name 1"? like html
<select>
<option value="5">buddy name 1</option>
<option value="7">buddy name 2</option>
<option value="2">buddy name 3</option>
</select>
thanks

You have to write your own renderer.
example:
public class MyListsRenderer extends JPanel implements ListCellRenderer {
 JTextArea t;
 private LinkedHashMap<Integer, String> departmentsList;
 private LinkedHashMap<Integer, Boolean> checkedList;
 public MyListsRenderer(int tabSize) {
 t = new JTextArea();
 t.setTabSize(tabSize);
 public Component getListCellRendererComponent(JList list, Object value,
 int index, boolean isSelected, boolean cellHasFocus) {
 Integer id = (Integer) value;
 // you need to create class that get an id (value) and return name
 //this is my example:
 String name = Contacts.getInstance().getContacts().get(
 (Integer) value);
 t.setText(name);//this is the text in the list row
 add(t);
 return this;
}

Java Callout - how to set Sender Name by InstanceName

I have a following code on Java Callout executed on Listening Channel:
import oracle.tip.b2b.message.InstanceMessage;
import oracle.tip.b2b.model.instance.Instancemessage;
// some other imports //
public class GetPartner implements Callout {
public void execute(CalloutContext calloutContext, List input,
List output) throws CalloutDomainException,
CalloutSystemException {
Logger log = Logger.getLogger(TransportCallout.class.getName());
DiagnosticService.log("MKRTransportCallout: Init");
try {
log.setLevel(Level.INFO);
CalloutMessage message =
(CalloutMessage)input.get(0);
Instancemessage inst = new Instancemessage();
InstanceMessage instance = new InstanceMessage(inst);
String name = instance.getSenderId();
String name2 = instance.getSenderName();
log.info("SENDER ID FROM JAVA CALL " + name);
log.info("SENDER NAME FROM JAVA CALL " + name2);
Both logged values are null.
My question is - how to connect CalloutMessage variable with Instancemessage variable via Java code?
My variable "inst" is null, because the context from variable "message" is not related with it - there is no connection between CalloutMessage and Instancemessage. How to set connection like this?

just a short addition. At the moment i use the following code to generate a MimeMessage:
try
            // Get session
            Session session = Session.getDefaultInstance(MailQueue.props, null);
            // Define message
            this.message = new MimeMessage(session);
            message.setFrom(new InternetAddress(from));
            message.setRecipients(Message.RecipientType.TO, InternetAddress.parse(to, false));
            message.setSubject(subject);
            // pass the mail content and set the Mime Typ
            message.setContent(msg, MimeTyp);
        catch (MessagingException me)
        }

WebCamera How to set display name

Similar Messages

Maybe you are looking for