WebcamSubscriber positioning and sizing

I am using 2 WebcamSubcribers in a ConnectSessionContainer. The first WebcamSubscriber seems to be positioned and sized correctly, then when I add another the size and position changes, and I'm not sure why. The first image below is with one WebcamSubscriber, and the second image is after the second WebcamSubscriber gets started. Also, top-left both WebcamSubscribers should be positioned at 20,100, and that's not happening either.
The code I am using is below both images.
Thanks!
-Matt
 <rtc:ConnectSessionContainer id="cSession"
 width="100%"
 height="100%"
 roomURL="">
 <rtc:authenticator>
 <rtc:AdobeHSAuthenticator userName=""
 password=""/>
 </rtc:authenticator>
 <rtc:WebcamPublisher id="pub"/>
 <rtc:WebcamSubscriber width="300"
 height="300"
 x="20"
 y="100"
 displayUserBars="false"/>
 <rtc:WebcamSubscriber width="100"
 height="100"
 x="20"
 y="100"
 displayUserBars="false"
 webcamPublisher="{pub}"
 publisherIDs="{[cSession.userManager.myUserID]}"/>
 <s:Button id="startCamAndVoice"
 label="Start Camera and Voice"
 click="startCamAndVoice_clickHandler(event)"/>
 <s:Button id="startScrShare"
 label="Start Screen Sharing"
 x="350"/>
 </rtc:ConnectSessionContainer>

I've found it's worthwhile spending time fiddling and adjusting Lightroom's templates and saving to Custom Pages but I haven't found a way of removing a custom page layout once I've finished using it or tweaked it some more. Can you say how to remove one, please, johnbeardy? I can put them in and out of Favourites but the Custom Pages list just gets too long.

Similar Messages

% relative positioning and sizing in Captivate 8?

I'm doing lots of exploring of the way objects size and position in a responsive project but I just don't get '% relative' option for positioning and sizing.
Positioning: It seems to me that Smart Positioning allows one object to be positioned relative to another without the need for '% relative'.
Sizing: I can see the need for '% relative' in object sizing but can't see how you can specify the object its size should be relative to!
Probably I'm just not seeing the wood for the trees but could anyone point me in the right direction
regards

Captivate has no real layers, like Photoshop, but there is a stacking order
in the Timeline. You can have motion path effects for objects, but not yet
for responsive projects, only for normal projects.

Can I create a completely custom page layout for a book, positioning and sizing pictures and text?

I'd like to create a totally custom page, inserting photos at various locations and sizes as well as text regions. Can this be done? I haven't been able to find a way to do this.

I've found it's worthwhile spending time fiddling and adjusting Lightroom's templates and saving to Custom Pages but I haven't found a way of removing a custom page layout once I've finished using it or tweaked it some more. Can you say how to remove one, please, johnbeardy? I can put them in and out of Favourites but the Custom Pages list just gets too long.

Can the position and szing of a control element in a View be controlled from the ViewModel?

Is it possible to change the position of a control, say a label, as a response to some action/operation from the ViewModel? Like if one response to something is true then place the label in the top left corner. If false, place the label
in the lower right corner. I realize you could have a label in each position and just set the visibility. But can the position and sizing of said label be controlled from the View Model? What would be a sample coding of this? would
it be in the xaml or combination of a method in the ViewModel and the xaml?
Rich P

First off Rich, say TextBlock to yourself ten times.
Use a TextBlock rather than a label.
There are a bunch of different ways to do this and the easiest is to have two controls whose text is bound to the one property.
Bind the Visibility of each to another 2 properties in the viewmodel.
Collapse one and Visible the other.
The reason for that is that it's easier.
Technically, you could put one textblock in a grid and use margin to control this. You could animate x y co-ordinates and move the textblock mysteriously across the window if you put your mind to it.
Or you could put it in a row/column "cell" of a grid and change which cell it goes in - but that would involve some mechanism like messaging from the viewmodel to the view and is not really ideal if you can avoid it.
I'd have a pair of textblocks, here's one:
<TextBlock Name="TopLeftMsg"
Text="{Binding Msg}"
Visiblity="{Binding TopLeftVis}"
Both would bind to a public string property msg in the viewmodel.
They each get their own public visibility property and that'd be switched between Visibility.Visible and Visibility.Collapsed.
Sizing of textblocks is best fitted to content because all you see is the text.
Textboxes are arguably different because you can see the things.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

Controling Position and Velocity of trolley

Hey,
I am working on an application for a engineering design project that requires me to control the position and velocity of a trolley on a linear track.
I have done some work in LabWindows before controlling the speed and position of a linear movement but am having some troubles shifting my knowledge from a small application to what I am working on now. This is what my plan is; I currently have a motor (DC 24V 88A), String potentiometer to determine linear distance travelled (there was risk of slip and need of high precission), sufficiently sized power supply and BNC-2110 DAQ.
My plan (which I am looking for some feedback on ... no pun intended) is to use LabView to create a PWM (which has already been done) to control the speed of the motor via the counter turning on and off a power mosfet completing the Motor's circuit. By varying the time on and off I hope to control the speed.
After this has been completed I hope to hook up my string potentiometer to the Trolley and see how it's position changes over time (i.e. determine the speed at which the trolley is moving at for a variety of different % time on and off). This will act as an open loop test, which I was hoping to then figure out a practical transfer function for the motion of the trolley and then somehow use the String Pot as a feedback sensor to complete the loop and create a PI controller. I am having a hard time wrapping my mind around how I am suppose to put the later bit into practice. It all sounds fine on paper but actually approaching an implementation of this idea is boggling my mind.
Any input or pointers would be greatly appreciated. Am I on the right track or am I looking at something completly wrong... being a student I guess I don't know exactly how things are done in practice in industry, just what is written in books so any help would greatly appreciated.
Thanks!
Mac

Mac,
starting with an open loop system, determining the transfer function and designing the control algorithm is a reasonable approach albeit a little bit academic.
A more empiric approach is tuning the closed loop motion control system by means of test functions like white noise or a setpoint step. Here you can find some information about tuning a motion control system by analyzing the step response of the closed loop system (Please note, that this document refers to NI motion control boards, but the general approach of the tuning process is universal).
This brings me to something very essential. Stable control systems require a deterministic real-time environment. You haven't provided explicit information about the environment that you are intending to use, but it sounds like you are planning to use a Windows based system with LabVIEW. This is not recommended, as such a system can't guarantee stable control loop timing, which is at least as important as the right set of PID parameters.
So my recommendation here is to use either a motion control board which runs the control algorithm onboard or to run the application with the DAQ board under LabVIEW RealTime (could run on a PXI-system or on desktop PCs that meet certain requirements). If you are going for the second approach, you may also consider using the NI SoftMotion Development Module.
If there is any kind of campus license of NI-Software available at your university, all the required software components should be already available for you.
Last but not least here are some considerations about the power circuitry. You have suggested to use a PWM signal that controls a single mosfet. This approach is not feasible in most applications, as it doesn't allow you to control the position and the speed of the motor accurately. To do this, you need to be able to drive the motor in both directions. You could do this by using an H-bridge circuitry, but this requires some more considerations when designing the control algorithm. In fact in most cases you would work with two cascaded control loops. The inner control loop is the current control loop, that generates the signals for the H-bridge, while the outer control loop is the position/velocity control loop.
Depending on the focus of your project, you may also consider using a commercial motion drive that provides the power circuitry and the current control loop. Those devices typically provide a +/- 10 V input for an external control signal that is provided by the outer control loop.
I hope this information provides some ideas to getting started.
Kind regards,
Jochen Klier
National Instruments

Chart Error - scroller positions should be positive and integer


Hello Expert
I have created a flash chart with two filters on the chart region.
i) ‘Select list with submit' ----- (:P23_TRC)
ii) ‘Radio button with submit' -----(:P23_IMPACTC)
The chart should display as per the filters selection.
However, I get the error message "scroller positions should be positive and integer", once, whenever I load this chart page for the 1st time in a new IE window.
After I change the filter's value it will work perfectly fine.
In filters default value is one value from respective filter list of value


If I remove the filter conditions from chart query, it works perfectly without error.
Here are my chart series queries
select null link, V.LOB label, COUNT(TR) "Customer Care"
from V_PROCESSTRACKING V
Where V.ProcessArea like '%Customer Care%' and (V.TR = :P23_TRC) AND ((V.IMPACT = :P23_IMPACTC)OR (:P23_IMPACTC = 'ALL'))
group by V.LOB
order by V.LOB
select null link, V.LOB label, COUNT(TR) "Sales"
from V_PROCESSTRACKING V
Where V.ProcessArea like '%Sales%' and (V.TR = :P23_TRC) AND ((V.IMPACT = :P23_IMPACTC)OR (:P23_IMPACTC = 'ALL'))
group by V.LOB
order by V.LOB
Customer XML
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<root>
<type>
<chart type="Stacked Horizontal 3DColumn">
<animation enabled="yes" appearance="size" speed="10" />
<hints auto_size="yes">
<text><![CDATA[{NAME}, {VALUE}]]></text>

</hints>
<names show="no"/>
<values show="no" prefix="" postfix="" decimal_separator="." thousand_separator="," decimal_places="0" />
<arguments show="no" />
<column_chart column_space="3" block_space="12">
<border enabled="no" />
<block_names enabled="yes" placement="chart" position="left" >

</block_names>
</column_chart>
</chart>
<workspace>
<background enabled="yes" type="solid" color="0xffffff" alpha="0" />
<base_area enabled="no" />
<chart_area enabled="yes" x="215" y="50" width="705" height="500" deep="0">
<background enabled="no"/>
<border enabled="yes" size="1"/>
</chart_area>
<x_axis name="Line of Business" smart="yes" direction="horizontal" rotation="-90" position="left_center" >

</x_axis>
<y_axis name="No. of Process" smart="yes" position="center_bottom" >

</y_axis>
<grid>
<values />
</grid>
</workspace>
<legend enabled="yes" x="935" y="50">
<names enabled="yes">

</names>
<values enabled="no"/>
<scroller enabled="no"/>
<header enabled="no"/>
<background alpha="0"/>
</legend>
</type>
#DATA#
</root>
Help please!!!!! It's urgent
Sagar


Hi Rima,
I found the solution,
My graph is dependent on the page items. What I found was when I load the page, item default value was displayed but it was not stored in the memory. Item value only gets stored in memory when the page is submitted.
Line: -----
Soultion : - Create a page level before header process and define the default value over here as well. This will resolve your error.
Hopefully you understood what I am trying to explain. If not let me know and I will trying to put in picture and email you.
Sagar

Creation of lsmw for updation of position and pers area

Hi friends,
I am tried many time to update position and personnel area through lsmw for all employees ,at time of recording its coming.But once compltion of lsmw preparation i am uploaded my inputs through tabfile that time its updating only personnel number and infotype and its asking the save the action screen (At the same time its showing one popup below screen like there is no recording for mp000000).Can you tell any one there whats the problem.At the same time is it possible to upload the position and personnel area through lsmw.
Thanks,
arjun.

Hi Arjun
Are you performing a hiring actions, if you are performing a hiring action, when you start with LSMW, the recording should be correct with hire date or start date, personnel number, reason for hire, position number, personal area, employee group and subgroup.
The source field you specific should contain the required field name, type, length and field discription. The field mapping should be done perfectly and assign the specified file in txt format and try to upload.
If you are facing any problem, let me know. I think I can help you
Regards
Santhosh.S

How to check position and length of a field in a structure

Dear All,
DATA : P_DEST TYPE ANY.
Assuming that the structure (P_DEST ) conatins a field called 'ROUTE', how to find the position and length of field 'ROUTE'.
Please help!!
Thank you in advance.
Sravan.

Hi,
you may need to find out the type of a generic interface parameter in a subroutine. To do this, you would use the statement:
DESCRIBE FIELD <f> [LENGTH <l>] [TYPE <t> [COMPONENTS <n>]]
[OUTPUT-LENGTH <o>] [DECIMALS <d>]
[EDIT MASK <m>] [HELP-ID <h>].
The attributes of the data object <f> specified by the parameters of the statement are written to the variables following the parameters.
Regards
Sudheer

On my canon powershot A3300IS the lense is stuck in the extended position and will not close

I have a canon powershot A3300 IS the lense is stuck in the extended position and will not close. How can I fix this myself?

Forneypamela,
Please remove the battery from the camera for a few minutes. Then, put the battery back in the camera and power it on again. If the lens is still stuck in the extended position, the camera is going to need service. I apologize for any inconvenience this may cause.
To start your repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The unit offered through this program carries a 90 day warranty. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Missing position and Org Unit relationship in PO13

Hello SAP Pundits,
I created a Position 1234 with transaction PPOM with Org Unit A and Job code X with start date 01/01/2009
Now I hire an employee XYZ with this position X from start date 01/01/2009.
When I go and see position X in PO13 it shows following relationships
1)     Position 1234 - Org Unit A from 01/01/2009 to 31/12/9999
2)     Position 1234 u2013 Job Code X from 01/01/2009 to 31/12/9999
3)     Position 1234 u2013 Person XYZ from 01/01/2009 to 31/12/9999
Perfect till now.
Now if I change the Org Unit of the Position 1234 from A to B from date 01/04/2009 using PO13.
A new record is created in IT0001 with start date 01/04/2009 and previous record is delimited.
But now if I check the relationships in PO13 for position 1234 I donu2019t see the new record for Position 1234 and Org Unit B.
However the previous relationship between position 1234 and Org Unit A is delimited till 31/03/2009.
Why am I not able to see the assignment of Positon 1234 with new Org Unit B? Any reason why I am getting such an error?
Thanks in advance.
Regards,
Ajay Hosur

When you have changed the Position 1234 to org Unit B from 01.04.2009 then the previous relationship will not show in po13, it goes into History which you can see in Complete Position Description..
goto pp01 and select that position and create relationship with Org Unit B... am not sure why in Infotype 0001, previous record get delimited and new record got created..

How is workflow assigned to positions and particular company code / plants

Hi Everyone,
We have updated a system with a new company code and corresponding new plants for profit center update. Now, they want the workflow handling of INVOIC, DESADV and ORDRSP to still be maintained. There is an existing workflow for error handling on these messages for the old company code and plants. The workflow items are sent to certain positions maintained in PPOM. Now, I am requested to create new positions that will receive the notifications for errors on incoming invoices, order responses and dispatch advices for the new company code/plants. Creating new positions and assigning agents to them is quite easy but my problem is where to specify the information about the company code and plants. For the existing positions, only the Basic data tab is maintained where only an abrreviation of the position and its definition need to be entered.
Right now, the workflow items for the new company code and plants are directed to a position that already exists in PPOM before the project. So how can I have the workflow items be directed to a new position that I will create?
I hope someone can provide an answer to this. Thanks!

Hello
Are the workflows custom or standard ones?
You need to check the workflow definition as to how they are designed to get the Positions and then change accordingly. The email task may be assigned to positions directly, or there is some custom code or a Workflow Rule.....First get to the agent determination (by going to Workflow Definition) and then you may change the "logic" for positions.
regards,
Modak

Adjust position and size of textField and button...

Dear All,
I have the following sample program which has a few textFields and a button, but the positions are not good. How do I make the textField to be at the right of label and not at the bottom of the label ? Also how to adjust the length of textField and button ? The following form design looks ugly. Please advise.
import javax.swing.*; //This is the final package name.
//import com.sun.java.swing.*; //Used by JDK 1.2 Beta 4 and all
//Swing releases before Swing 1.1 Beta 3.
import java.awt.*;
import java.awt.event.*;
import javax.swing.text.*;
import javax.swing.JTable;
import javax.swing.JScrollPane;
import javax.swing.JPanel;
import javax.swing.JFrame;
public class SwingApplication extends JFrame {
private static String labelPrefix = "Number of button clicks: ";
private int numClicks = 0;
String textFieldStringVEHNO = "Vehicle No";
String textFieldStringDATEOFLOSS = "Date of Loss";
String textFieldStringIMAGETYPE = "Image Type";
String textFieldStringIMAGEDESC = "Image Description";
String textFieldStringCLAIMTYPE = "Claim Type";
String textFieldStringSCANDATE = "Scan Date";
String textFieldStringUSERID = "User ID";
String ImageID;
public Component createComponents() {
//Create text field for vehicle no.
final JTextField textFieldVEHNO = new JTextField(5);
textFieldVEHNO.setActionCommand(textFieldStringVEHNO);
//Create text field for date of loss.
final JTextField textFieldDATEOFLOSS = new JTextField(10);
textFieldDATEOFLOSS.setActionCommand(textFieldStringDATEOFLOSS);
//Create text field for image type.
final JTextField textFieldIMAGETYPE = new JTextField(10);
textFieldIMAGETYPE.setActionCommand(textFieldStringIMAGETYPE);
//Create text field for image description.
final JTextField textFieldIMAGEDESC = new JTextField(10);
textFieldIMAGEDESC.setActionCommand(textFieldStringIMAGEDESC);
//Create text field for claim type.
final JTextField textFieldCLAIMTYPE = new JTextField(10);
textFieldCLAIMTYPE.setActionCommand(textFieldStringCLAIMTYPE);
//Create text field for scan date.
final JTextField textFieldSCANDATE = new JTextField(10);
textFieldSCANDATE.setActionCommand(textFieldStringSCANDATE);
//Create text field for user id.
final JTextField textFieldUSERID = new JTextField(10);
textFieldUSERID.setActionCommand(textFieldStringUSERID);
//Create some labels for vehicle no.
JLabel textFieldLabelVEHNO = new JLabel(textFieldStringVEHNO + ": ");
textFieldLabelVEHNO.setLabelFor(textFieldVEHNO);
//Create some labels for date of loss.
JLabel textFieldLabelDATEOFLOSS = new JLabel(textFieldStringDATEOFLOSS + ": ");
textFieldLabelDATEOFLOSS.setLabelFor(textFieldDATEOFLOSS);
//Create some labels for image type.
JLabel textFieldLabelIMAGETYPE = new JLabel(textFieldStringIMAGETYPE + ": ");
textFieldLabelIMAGETYPE.setLabelFor(textFieldIMAGETYPE);
//Create some labels for image description.
JLabel textFieldLabelIMAGEDESC = new JLabel(textFieldStringIMAGEDESC + ": ");
textFieldLabelIMAGEDESC.setLabelFor(textFieldIMAGEDESC);
//Create some labels for claim type.
JLabel textFieldLabelCLAIMTYPE = new JLabel(textFieldStringCLAIMTYPE + ": ");
textFieldLabelCLAIMTYPE.setLabelFor(textFieldCLAIMTYPE);
//Create some labels for scan date.
JLabel textFieldLabelSCANDATE = new JLabel(textFieldStringSCANDATE + ": ");
textFieldLabelSCANDATE.setLabelFor(textFieldSCANDATE);
//Create some labels for user id.
JLabel textFieldLabelUSERID = new JLabel(textFieldStringUSERID + ": ");
textFieldLabelUSERID.setLabelFor(textFieldUSERID);
Object[][] data = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Chasing toddlers", new Integer(2), new Boolean(false)},
{"Mark", "Andrews",
"Speed reading", new Integer(20), new Boolean(true)},
{"Angela", "Lih",
"Teaching high school", new Integer(4), new Boolean(false)}
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
final JTable table = new JTable(data, columnNames);
table.setPreferredScrollableViewportSize(new Dimension(500, 70));
//Create the scroll pane and add the table to it.
JScrollPane scrollPane = new JScrollPane(table);
//Add the scroll pane to this window.
getContentPane().add(scrollPane, BorderLayout.CENTER);
final JLabel label = new JLabel(labelPrefix + "0 ");
JButton buttonOK = new JButton("OK");
buttonOK.setMnemonic(KeyEvent.VK_I);
buttonOK.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
          try {
numClicks++;
          ImageID = textFieldVEHNO.getText() + textFieldDATEOFLOSS.getText() + textFieldIMAGETYPE.getText();
label.setText(labelPrefix + ImageID);
          ScanSaveMultipage doScan = new ScanSaveMultipage();
          doScan.start(ImageID);
     catch (Exception ev)
label.setLabelFor(buttonOK);
* An easy way to put space between a top-level container
* and its contents is to put the contents in a JPanel
* that has an "empty" border.
JPanel pane = new JPanel();
pane.setBorder(BorderFactory.createEmptyBorder(
20, //top
30, //left
30, //bottom
20) //right
pane.setLayout(new GridLayout(0, 1));
     pane.add(textFieldLabelVEHNO);
     pane.add(textFieldVEHNO);
     pane.add(textFieldLabelDATEOFLOSS);
     pane.add(textFieldDATEOFLOSS);
     pane.add(textFieldLabelIMAGETYPE);
     pane.add(textFieldIMAGETYPE);
     pane.add(textFieldLabelIMAGEDESC);
     pane.add(textFieldIMAGEDESC);
     pane.add(textFieldLabelCLAIMTYPE);
     pane.add(textFieldCLAIMTYPE);
     pane.add(textFieldLabelDATEOFLOSS);
     pane.add(textFieldDATEOFLOSS);
     pane.add(textFieldLabelUSERID);
     pane.add(textFieldUSERID);
pane.add(buttonOK);
     pane.add(table);
//pane.add(label);
return pane;
public static void main(String[] args) {
try {
UIManager.setLookAndFeel(
UIManager.getCrossPlatformLookAndFeelClassName());
} catch (Exception e) { }
//Create the top-level container and add contents to it.
JFrame frame = new JFrame("SwingApplication");
SwingApplication app = new SwingApplication();
Component contents = app.createComponents();
frame.getContentPane().add(contents, BorderLayout.CENTER);
//Finish setting up the frame, and show it.
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
frame.pack();
frame.setVisible(true);

Post Author: Ranjit
CA Forum: Crystal Reports
Sorry but, i've never seen formula editor for altering position and size. If you know one please navigate me.
I guess you have updated formula editor beside "Lock size and position" - if yes its not right. There is only one editor beside 4 items and editor is actually for Suppress.
Anyways, A trick to change size a position is:
Create 4-5 copies (as many as you expect positions) of the text object. place each at different positions, right click, Format, Suppress and in formula editor for suppress write the formula: If your condition is true, Suppress=false, else true.
Position will not change but user will feel; for different conditions -position is changed
Hope this helps.
Ranjit

Read a layer's live 3D Position and Rotation?

Hi,
I'm having a little trouble figuring out how to use AEGP_GetLayerStreamValue to read a layer's 3D position and orientation. That is to say, it actually works as the values are read correctly, but unfortunately I don't get the "live" values while I interactively transform the layer in the AE viewport... the values only update if I turn my plug-in off and back on.
I'm pretty sure that the code I'm using right now did what I was expecting in a CS3 beta and IIRC AE7 as well. Now in CS3, I can't read the "live" values for layers... however, it does work for cameras and lights, which seems odd.
I suppose it has something to do with AE caching the layer? Can I somehow tell AE CS3 that I want to access those values?
Thanks!

By the way, how can I use the AEGP_GeometrySuite? It's in the docs, but I can't find any mention of the functions in the SDK headers or utils.

Images change position and dimension after client edits on admin console!

Hi,
1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
Any help gratfully received. Thanks

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Positive and Negative Frequency deviation Calculation

Hi ,
Iam using PXI 5600 with PXI 5620 for RF measurement.
I need to measure Positive and Negative frequency Deviation. The NI example vi "MT RFSA Demodulate FM.vi" gives peak Frequency deviation . Can any one please help me to find positive Frequency Deviation and Negative frequency deviation from it
Thanks,
Niju.
Solved!
Go to Solution.

Hi Niju,
First things first - the 5600+5620 combined is what we refer to as a PXI-5660 RF Signal Analyzer.
The PXI-5660 cannot be progammed via the NI-RFSA driver. The Modulation Toolkit FM example you reference is for the PXI-5661 and PXIe-5663 analyzers, both of which use the NI-RFSA driver.
You should use MT ni5660 Demodulate FM.vi, located under ni5660 examples.
Now on to your question...
When you perform an FM demodulation, the resultant data out of the MT Demodulat FM subVI is frequency vs. time, with the frequency (Y axis) values being relative to the specified carrier frequency. So, the data is frequency deviation (Hz) vs. time. All you need to do to get positive and negative frequency deviation is to use a LabVIEW Array Max & Min primitive from the Array functions pallette. This will give you the min and max value of the FM data which will be the peak negative and peak positive frequency deviation.
Regrds,
Andy Hinde
RF Systems Engineer
National Instruments

WebcamSubscriber positioning and sizing

Similar Messages

Maybe you are looking for