Webcenter with Service Bus....

Hi,
I need to integrate external system / third party systems which are providing the data information, exposing through several options like WebServices etc and in future these integration points/systems will be more or may change.And all these systems are not available internally and are distributed systems.
Taking this into Scenario, should I use Oracle Service Bus for connecting, mediating and managing interactions between heterogeneous services?
Or should I use Webcenter services module of Webcenter Suite fusion middleware for Integration.
Thanks!!

Hi,
I have not worked with Webcenter Suite but as far as I know there is no similarity between Webcenter Suite and OSB. Webcenter Suite is a portal framework and OSB is a routing solution product. From the info you provided, I would suggest to use OSB.
First of all identify what you need and then choose the product. Please elaborate your use case (specially the front-end part).
Regards,
Anuj

Similar Messages

Workflow Manager 1.0 Refresh with Service Bus 1.1 Error

Hi I have installed and configured Workflow Manager 1.0 Refresh with Service Bus 1.1.
I didn't face any errors while installing or configuring the SB 1.1 and WFM 1.0.
I used the Workflow Configuration Wizard to configure the SB 1.1 and WFM 1.0 instances.
I have some workflows where I have custom code activities that put messages into the topic or pull messages from the topic.
I'm able publish these WFs to the scope as well.
However, when I try to execute these workflows, it throws up the following error:
Could not load file or assembly 'Microsoft.ServiceBus, Version=2.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT:
0x80131040)
I checked the ServiceBus dll version that is present in the WF Artificats and WFWebroot/Bin folders and find that the versions of this dll in both the folders is: 2.0.40131.0 (the version of the dll in the Service Bus folder is 2.1.30904.0).
How do I get the WFM to load the latest SB 1.1 dll?

What is the account used to install Workflow in Staging and Dev environment
I assume that Workflow in Staging might be installed with different account that can cause issue
Also check ULS log and Event log on Workflow manager server and sharepoint server when workflow does not execute
I assume it is working on DEV so I dont trust DEV environment. Try the same setup on a different machine(Preferred new).
Also check server level permission for the account like if working and non working account can access system drive.
If this helped you resolve your issue, please mark it Answered

Apache Qpid Proton on OS X (Mac) with Service Bus

I want to use (if possible) the Apache Qpid Proton messaging API (sending messages to Windows Azure Service Bus) on a MacBook Pro using C. In the Apache Qpid Proton
documentation I see instructions to build for Linux and Windows. Can anyone help me with how to proceed (build) for OS X (Mac)?
Thanks.

Thanks for your answer ... but I want to use (if possible) Qpid Proton on OSX/Mac (not Linux) and using C (not Java).
0
Sign
in to vote
I want to use (if possible) the Apache Qpid Proton messaging API (sending messages to Windows Azure Service
Bus) on a MacBook Pro using C.

BizTalk 2013 SB-Messaging Adapter: Unable to receive messages from a Azure service bus Subscription

Hi,
I am trying to receive messages from a Azure service bus subscription using SB-Messaging Adapter in BizTalk Server 2013 but getting the following error.
"The token provider was unable to provide a security token while accessing 'https://overcasb-sb.accesscontrol.windows.net/WRAPv0.9/'.
Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
It seems the error is related with Service Bus Authentication and Authorization with the Access Control Service. Can anybody help me out if I am missing something here?
Also for consuming the AWSB (namespace, topic name, subscription name, Issuer name, Issuer Key) I have referred the following link
http://soa-thoughts.blogspot.in/2013/02/biztalk-server-2013-new-adapters-series.html
Thanks!
Regards,
Gautam
gautam

Hi,
When I am trying to receive the same messages from a Azure service bus subscription using .net (C#) client,
BusSubscriberbusSubscriber =
newBusSubscriber("TestTopic2",
"Endpoint=sb://overcasb.servicebus.windows.net/;SharedSecretIssuer=owner;SharedSecretValue=wqYlT4yHZimeUZacH+1V1hj/ZrKu7zK9ELaaLYDxqjc=",
"AssetMovement",
"AssetMovement");
I am getting the same error here also.
"The token provider was unable to provide a security token while accessing 'https://overcasb-sb.accesscontrol.windows.net/WRAPv0.9/'.
Error Code: 407 Proxy Authentication Required. The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. (12209)
By setting <defaultProxy useDefaultCredentials="true" /> in appconfig, I got rid of the above error. And now its working fine with .net(C#) client.
<configuration>
<system.net>
<defaultProxy useDefaultCredentials="true" />
</system.net>
</configuration>
The same setting I tried in BTSNTSvc.exe config file and ofcourse restarted the host instance but still getting the same error. Any help?
gautam

WCF service application hosted in IIS for reading Windows server service bus topic/subscription

We have a WCF service application(not web application) which is deployed in IIS 8 pointing to the windows server service bus topic/subscription. We have configured the WCF service with applicationInitialization feature of IIS 8 to warm up.
But the WCF service is not reading any message from the topic/subscription.
configured in web.config file as below
<system.webServer>
<applicationInitialization>
<add initializationPage="/MyService.svc" />
</applicationInitialization>
</system.webServer>
When we run the same from visual studio its reading messages from topic/subscription.
any configuration/settings which we are missing?

You probably didn't initialize correctly the auto-start. Btw. I would recommend you to use AppFabric for this feature. It is more transparent in development and production.
Please take a look on following posts:
http://social.technet.microsoft.com/wiki/contents/articles/1284.host-wcf-services-with-service-bus-endpoints-in-iis-and-windows-server-appfabric.aspx
http://developers.de/blogs/damir_dobric/archive/2009/10/11/iis-7-5-and-always-running-web-applications.aspx
http://developers.de/blogs/damir_dobric/archive/2010/06/11/appfabric-issue-with-aoutostart.aspx
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com

Windows Azure Pack for Windows Server shows Service Bus services as down

Hi,
I got 3 servers with Service Bus 1.1 and WAP working as a "cluster" with loadbalancer.
When going to SB on the admin site it shows services running on 1 server only instead of 3.
If I restart the server it switches to one of ther other two.
Loadbalancer is Cisco and it's configured correctly. Any idea what it could be?
It should show all 3 as running?
Thank you in advance.

Hi Ryankorock,
Sorry to revive an old post but is there any update on compatibility? We are running SCVMM 2012 R2 Build 3.2.7768.0 with an F5 BIG-IP
running "11.6.0 Build 0.0.401 Final". We see the exact same error
Error (21426)
Execution of DataCenterManager.LB::AddLBVIP on the configuration provider a1af2238-5665-454a-8560-64fafbfe3385 failed. Detailed exception: Microsoft.SystemCenter.DataCenterManager.LB.LBConnectionFailedException: There is an error in XML document (246,
74). ---> F5Networks.Protocols.iControl.iControlException: There is an error in XML document (246, 74).
The plugin creates everything on the F5, pools, nodes, and virtual server. We have tried with and without a health probe with no luck.

Receive location using SBMessaging adapter disabled when Azure service bus is down

Does anybody experience SBMessaging receive locations are disabled when Azure service bus is unavailable with a MessagingCommunicationException? Is this an expected behavior / 'by design'? We see this exception a few times a day. I don't
see any retry attempts based on the event log. Our current solution is to have a powershell script that enables the receive location if it's disabled. This script runs every 15 minutes. Below is a sample of the error in the event log.
The receive location "Warnings_SB_New" with URL "XXXXXX" is shutting down. Details:"System.ServiceModel.EndpointNotFoundException: Error during communication with Service Bus. Check the connection information, then retry. --->
Microsoft.ServiceBus.Messaging.MessagingCommunicationException: Error during communication with Service Bus. Check the connection information, then retry. ---> System.ServiceModel.CommunicationObjectFaultedException: Internal Server Error: The server did
not provide a meaningful reply; this might be caused by a premature session shutdown..TrackingId:bb29d71c-a4d5-430c-a2d9-8a2e3acfad1d, Timestamp:5/9/2014 2:38:19 AM

Hi R. de Veen,
Below as the script we used with BTS2013. We created a command line and setup a scheduled task. Again, we don't use this script with BTS2013R2 since we do not have this issue with BTS2013 R2.
# Sample from https://github.com/tomasr/bts-ps-scripts/blob/master/bts-ports.ps
# declare our parameters: the action to take
param(
[string] $action=$(throw 'need action'),
[string] $name
$ctpRLs = @(
'Errors_SB_New'
#,'Error_OldTopic_OldLoggingDB'
,'Information_SB_New'
,'Warnings_SB_New'
#,'Information_NewTopic_OldLoggingDB'
,'Critical_SB_New'
#'Critical_OldTopic_OldLoggingDB'
# functions for pinging receive locations
function uti-ping-recv-loc
foreach ($rl in $ctpRLs)
Write-Host "`n"
if (( $rl -eq '') -or ($rl -eq $null))
throw "Receive location cannot be blank."
#Validate if this is a valid receive location
$recvloc = get-wmiobject MSBTS_ReceiveLocation `
-namespace 'root\MicrosoftBizTalkServer' `
-filter "Name='$rl'"
if ($recvloc -eq $null)
Write-Host "'$rl' does not exist. Skipping..." -foregroundcolor red -backgroundcolor black
else
Write-Host "Ping '$rl'..."
if ($recvloc.IsDisabled)
Write-Host "Restarting '$rl'..."
bts-set-recv-loc-status -name $rl -status 'enable'
Start-Sleep -s 10
if ($recvloc.IsDisabled)
Write-Host "Failed to enable $rl. Check the event log for more information." -foregroundcolor red -backgroundcolor black
else
Write-Host "'$rl' is enabled."
else
Write-Host "'$rl' is enabled."
$i++
Write-Host "`nComplete!!!`n`n" -foregroundcolor green -backgroundcolor black
# enable or disable the specified
# receive location
function bts-set-recv-loc-status($name, $status)
$recvloc = get-wmiobject MSBTS_ReceiveLocation `
-namespace 'root\MicrosoftBizTalkServer' `
-filter "Name='$name'"
switch ( $status )
'disable' { [void]$recvloc.Disable() }
'enable' { [void]$recvloc.Enable() }
# controls a send port
function bts-set-send-port-status($name, $status)
$sendport = get-wmiobject MSBTS_sendPort `
-namespace 'root\MicrosoftBizTalkServer' `
-filter "Name='$name'"
switch ( $status )
'start' { [void]$sendport.Start() }
'stop' { [void]$sendport.Stop() }
'enlist' { [void]$sendport.Enlist() }
'unenlist' { [void]$sendport.UnEnlist() }
function is-valid-opt($check, $options)
foreach ( $val in $options )
if ( $check -eq $val ) {
return $true
# main script
switch ( $action )
'ping-recv-loc' {
uti-ping-recv-loc
Write-Host "`n"
Write-Host "Syntax: .\RestartELCRLs.ps1 ping-recv-loc"
Write-Host "`n"

MessagingCommunicationException - Azure service bus

Quite frequently i see below errors in log files, are these not internally handled by service bus and retry ?. These doesn't seem to be timeout error and according to information from MSDN retry policy is applicable only for transient errors , is below error
classified as transient error
Exception: Microsoft.ServiceBus.Messaging.MessagingCommunicationException: Error during communication with Service Bus. Check the connection information, then retry. ---> System.ServiceModel.CommunicationObjectFaultedException: Internal Server Error:
The server did not provide a meaningful reply; this might be caused by a premature session shutdown..TrackingId:urn:uuid:e5749ef1-9ad3-4543-a420-14dfebaae4c4, Timestamp:3/30/2015 10:37:28 PM
Server stack trace:
Exception rethrown at [0]:
   at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Sbmp.DuplexRequestBindingElement.DuplexRequestSessionChannel.DuplexCorrelationAsyncResult.End(IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Channels.ReconnectBindingElement.ReconnectChannelFactory`1.RequestSessionChannel.RequestAsyncResult.<GetAsyncSteps>b__4(RequestAsyncResult thisPtr, IAsyncResult r)
   at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
Exception rethrown at [1]:
   at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Channels.ReconnectBindingElement.ReconnectChannelFactory`1.RequestSessionChannel.EndRequest(IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Sbmp.RedirectBindingElement.RedirectContainerChannelFactory`1.RedirectContainerSessionChannel.RequestAsyncResult.<>c__DisplayClass17.<GetAsyncSteps>b__a(RequestAsyncResult thisPtr, IAsyncResult r)
   at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
Exception rethrown at [2]:
   at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Sbmp.RedirectBindingElement.RedirectContainerChannelFactory`1.RedirectContainerSessionChannel.EndRequest(IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Channels.ReconnectBindingElement.ReconnectChannelFactory`1.RequestSessionChannel.RequestAsyncResult.<GetAsyncSteps>b__4(RequestAsyncResult thisPtr, IAsyncResult r)
   at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
Exception rethrown at [3]:
   at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Channels.ReconnectBindingElement.ReconnectChannelFactory`1.RequestSessionChannel.EndRequest(IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
Exception rethrown at [4]:
   at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.OnEndClose(IAsyncResult result)
   --- End of inner exception stack trace ---
   at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.TopicClient.OnEndClose(IAsyncResult result)
   at Microsoft.ServiceBus.Messaging.MessageClientEntity.Close(TimeSpan timeout)
   at Canon.PhotoModel.Infrastructure.ServiceBus.ServiceBusRepository.SendMessage[T](T eventObject, BrokeredMessage message)

It'll retry until operation timeout duration expires. Let's say the operation timeout on the factory is 60 seconds (this is the deafult value unless you've changed it). In this case the client will retry calls on transient failures internally until 60
seconds expire, then basically it'll buble up the exception to the caller.

Connect Azure Pack to Service Bus for Windows Server with Custom DNS

Hello! I'm trying to configure Azure Pack to use Service Bus for Windows Server 1.1 with Custom DNS.
All runs on one virtual machine (Windows Server 2012 R2) in Windows Azure.
I following this post:
roysvork.wordpress.com/2014/06/14/developing-against-service-bus-for-windows-1-1
Replace FramDNS "servicebus" to "mymachine.cloudapp.net", and create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
On Windows Azure Virtual Machine:
1.I'll set publuc DNS: mymachine.cloudapp.net
2.Open ports: 10354,10355,10356,10359,10000-10004
3.In hosts file: 127.0.0.1 mymachine.cloudapp.net
4.Create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
PowerShell:
Stop-SBFarm –Verbose
Set-SBFarm -FarmDns 'mymachine.cloudapp.net'
Update-SBHost –Verbose
Start-SBFarm –Verbose
New-SBAuthorizationRule -NamespaceName ServiceBusDefaultNamespace -Name MainRule -Rights Manage, Send, Listen
Afther that i can connect to my ServiceBusDefaultNamespace with SAS.
It's work perfect. But, When I try to create Service Bus Namespace from Azure Pack Tenant portal - in Log an Exception:
Namespace Provisioning Exception. TrackingId: . SystemId: . Namespace: SomeNamespace.
Method: Activating. Exception: System.Net.Http.HttpRequestException: An error occurred while
sending the request. ---> System.Net.WebException: The underlying connection was closed:
Could not establish trust relationship for the SSL/TLS secure channel. --->
System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure.
And status of namespace - Activating.
Please help!

Hi Alexander,
According to the log, it seems that the validation process of the certificate failed.
Please make sure that the certificate is installed in the client properly.
Usually, self-signed certificate should be installed in the Computer Account-->Trusted Root Certificate Authorities.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

Service Bus with WCF in IIS 8 with Application Initialization Issue

I’m running service bus 1.1 on premise locally and have it hooked into a wcf service using netMessagingBinding.
I installed Application Initialization and set Start Mode to AlwaysRunning for the application pool, and set Preload Enabled to true for the site.
I also have the appropriate <applicationInitialization> section in the web config where I added the service to an initializationPage.
The message gets delivered if I hit the endpoint in my browser, and even if I do an IIS reset, it still gets delivered, however I had to hit the endpoint first manually.
If I do a clean (or edit any of the wcf code files) and build, it won’t get delivered until I hit the endpoint.
I get similar behavior when I set a break point in the service and attach to the w3wp.exe process.
If I do a clean and build and set a break point in the service code, it has the open red circle that says breakpoint will not be hit, no symbols have been loaded for this document.
When I hit the endpoint, the open red circle gets filled, and the endpoint can be hit.
I’m guessing these 2 go hand in hand with what I’m seeing with the service bus.
Setting up Application Initialization fixes the issue if I restart IIS, it can continue to receive messages, however I first need to hit the endpoint.
I just don’t know how it handles the scenario when it first gets deployed (like when I do a clean and build).
I thought the Application Initialization would of handled this but I’m probably missing something.

Hi sir,
Form your description, it seems that you use the op-premise service bus. I will move this thread to Azure Pack forum for more helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SB-Messaging and service bus DLL within BTS seems not compatible with Cloud

I am trying to retreive a message from a Queue in azure service bus. The receive location gets disabled after 5 seconds of enabling it. The error message is :
The receive location "rlFromFireQueue" with URL "sb://muazure.servicebus.windows.net/firealertqueue" is shutting down. Details:"System.InvalidOperationException: This client is not supported for a partitioned entity. The client version
should be greater or equal than version '2013-10'..8653aa96-4c37-4ee1-8be8-52f2e9702ee0_G2_G2 ---> System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: This client is not supported for a partitioned entity. The client version should
be greater or equal than version '2013-10'..8653aa96-4c37-4ee1-8be8-52f2e9702ee0_G2_G2
I had the same exact issue when I was using an old .Net console application which was using microsft.servicebus.dll version 2.1. I downloaded the 2.4 azure sdk and ran setup. After replacing the reference in my console project to the new version I was able
to send messages to my queue.
My BTS box is 2013 R2 (upgraded from 2013), I checked the directory C:\Program Files (x86)\Microsoft BizTalk Server 2013, I noticed that the Microsoft.ServiceBus.dll in this directory is version 2.1 which according to a thread in blog is not compatible
to a new property introduced since last summer ( clients will be updated to support partitioned entities) when creating a new queue using Quick Create.
So my question is : How can I update the SB-MESSAGING adapter to use a new version to be compatible with this improvments in Azure or more clearly is there any config or procedures to be done to make the bTS 2013R2 adapter compatible with Azure service bus
partioning feature
For your reference, here is the url for the blog where I found the information
http://mindovermessaging.com/2014/06/21/service-bus-queuetopic-partitioning-not-supported-in-biztalk-services/
Thanks in advance

I'm afraid you wont be able to update the SB-Messaging adapter because the partitioning option is not supported.
However you have an alternative:
You can try using a WCF-Custom port with netMessagingTransport binding. This should be tested, because I'm not 100% sure it supports the partitioning feature. However all necessary features are working because we are using this setup at a current integration
project.
Also be sure to check Paolo's blog for all the necessary information regarding configuration and setup: http://code.msdn.microsoft.com/windowsazure/How-to-integrate-BizTalk-f0195690
Glenn Colpaert - Microsoft Integration MVP - Blog : http://blog.codit.eu

Need a help on implemening SAML with Oracle Service Bus

We are implementing Webservice security using SAML with Oracle Service Bus for our project. We are in dire need of help in implementing the same. We have found some documents (osb console help, osb security) from the oracle web site but those documents have high-level details only. If we get the step-by-step flow and examples of implementing the Webservices security using SAML with Oracle Service Bus, it would be appreciated.
Requirement details:
1. Client application has to generate the SAML assertion (token) and pass that token to the OSB proxy service in a SOAP header along with the request.
2. OSB proxy service gets the authentication token from the inbound request
3. The token is passed to an SAML Identity Assertion provider and validate the token
4. If the token is validated successfully then pass the valid token to appropriate business services.
5. Business services communicates the appropriate external web services after validating the token and gets the response.
Environment details:
1. Oracle Weblogic Application Server 10g3
2. Oracle Service Bus 10g3
Thanks,
Suresh Mani

We are implementing Webservice security using SAML with Oracle Service Bus for our project. We are in dire need of help in implementing the same. We have found some documents (osb console help, osb security) from the oracle web site but those documents have high-level details only. If we get the step-by-step flow and examples of implementing the Webservices security using SAML with Oracle Service Bus, it would be appreciated.
Requirement details:
1. Client application has to generate the SAML assertion (token) and pass that token to the OSB proxy service in a SOAP header along with the request.
2. OSB proxy service gets the authentication token from the inbound request
3. The token is passed to an SAML Identity Assertion provider and validate the token
4. If the token is validated successfully then pass the valid token to appropriate business services.
5. Business services communicates the appropriate external web services after validating the token and gets the response.
Environment details:
1. Oracle Weblogic Application Server 10g3
2. Oracle Service Bus 10g3
Thanks,
Suresh Mani

Oracle Service Bus Proxy Testing with Attached Policy

Hello,
When I'm testing a Proxy through the test console (lauch by clicking the bug) I'm seeing Override Values in the Security section. I've created four custom policies and attached two of them to the proxy. One that processes the request and the other the processes the response. The other two policies are attached to a composite on an interface to an external service. Those policies process the request/response respectively. When I bring up the test console for the OSB Proxy, I'm seeing the two policies that are attached to the composite in the "Security" section as "Override Values". If I don't delete the policies, they are executed. Which causes an error. So I have to delete them to get a clean run. I'm not sure why they are showing up in the "Override Values". It's definitely annoying that I have to delete them each time before executing the test. Any ideas on what's going on?
Thanks!
Steve
Oracle Service Bus Version: [Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174]
Oracle Weblogic Server Version: [WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 ]

Hi Wai,
I think it is not supported with OSB. The doc says -
46.15 Is single sign-on supported in Oracle Service Bus?
Strictly speaking single sign-on (SSO) is not applicable to Oracle Service Bus messaging scenarios for several reasons. First, Oracle Service Bus is stateless; there is no notion of a session or conversation among multiple parties. Second, Oracle Service Bus clients are typically other enterprise software applications, not users behind a Web browser. Therefore, it is acceptable to require that these clients send credentials such as username and password on every request, provided that the communication is secured by means such as SSL or WS-Security. However, SSO between the Oracle Service Bus Console and the Oracle WebLogic Server Administration Console is supported. For more information, see "Single Sign-On" in "Security Fundamentals" in Oracle Fusion Middleware Understanding Security for Oracle WebLogic Server.http://download.oracle.com/docs/html/E15866_01/security_faq.htm#i1058723
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/security_faq.html#wp1053670
Regards,
Anuj

Oracle Service Bus SSO with Proxy Service

Hi all,
I protect Proxy Service. It means only authenticated user can able to access it.
But when i want to access from my application server (weblogic), i don't want to authenticate again with OSB.
Is there any way to use SSO between application server and Oracle Service Bus ?
With Regards,
Wai Phyo

Hi Wai,
I think it is not supported with OSB. The doc says -
46.15 Is single sign-on supported in Oracle Service Bus?
Strictly speaking single sign-on (SSO) is not applicable to Oracle Service Bus messaging scenarios for several reasons. First, Oracle Service Bus is stateless; there is no notion of a session or conversation among multiple parties. Second, Oracle Service Bus clients are typically other enterprise software applications, not users behind a Web browser. Therefore, it is acceptable to require that these clients send credentials such as username and password on every request, provided that the communication is secured by means such as SSL or WS-Security. However, SSO between the Oracle Service Bus Console and the Oracle WebLogic Server Administration Console is supported. For more information, see "Single Sign-On" in "Security Fundamentals" in Oracle Fusion Middleware Understanding Security for Oracle WebLogic Server.http://download.oracle.com/docs/html/E15866_01/security_faq.htm#i1058723
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/security_faq.html#wp1053670
Regards,
Anuj

Webcenter with Service Bus....

Similar Messages

Maybe you are looking for