Webdynpro ALV checkbox displays 'X'
Hello Webdynpro Champions,
I have an issue with displaying ALV output in Webdynpro.
I have a checkbox as my first column.
This checkbox is bound to a context node.
When I check this checkbox, in the ALV output I get 'X' displayed in the output. I think this is unwanted in my case and hence will like to curb it and not display that X next to my checkbox in the ALV output.
Any ideas how to disable that X from gettting displayed in the ALV output?
Hello,
This one can you can solve by removing this (or smilar) method call from the place where you setup your ALV layout:
lrc_checkbox->set_text_fieldname( 'CBXCOLNAME' ).
As you probably have this call in your coding (copy&paste from different cell editor example? ), you will see column's text (autoo-mapped to content) next to your checkbox.
Best regards,
Marcin
Similar Messages
-
Hello,
My Webdynpro ALV report display SFLIGHT all fields .
But I want to show only five fields,
how code?
CODE::
data:node_flights type ref to if_wd_context_node,
it_flights type sflight_tab1,
is_flights type sflight,
it_final type IF_MAIN=>elements_flights,
is_final type IF_MAIN=>element_flights.
select * from sflight into table it_flights up to 10 rows.
node_flights = wd_context->get_child_node( 'FLIGHTS' ).
data:l_ref_cmp_usage type ref to if_wd_component_usage.
l_ref_cmp_usage = wd_this->wd_cpuse_alv( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
l_ref_cmp_usage->create_component( ).
endif.
data:l_ref_interfacecontroller type ref to iwci_salv_wd_table.
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
navigate from <CONTEXT> to <NODE_FLIGHT> via lead selection
node_flights = wd_context->get_child_node( name = `NODE_FLIGHT` ).
fill context node
node_flights ->bind_table( it_flight ).
endmethod.
thanksHI,
There is no need to change your code.
Do one thing.
Create a node SFLIGHT and do not add dictionary structure SFLIGHT.
Then create what are the required five attributes under it.
Make sure all these five refer to the dictionary data elements.
example: If you want carrid declare dectionary structure S_CARR_ID.
Like wise.
Now finally goto component usage->ALV->INTERFACECONTROLLER in the
left side tree of web dynpro component.
Then create component usage and drag SFLIGHT node to DATA of the context.
It is one of the way.
Second way is.
Create SFLIGHT node and mention SFLIGHT as stricture and select five required attributes that you need.
Now after creation of SFLIGHT NODE just delete the structure name present in the PROPERTIES of
SFLIGHT NODE.
Now finally goto component usage->ALV->INTERFACECONTROLLER in the
left side tree of web dynpro component.
Then create component usage and drag SFLIGHT node to DATA of the context.
I hope it helped you.
Regards and Best wishes. -
How to capture the checkbox status in ALV Grid display
I need some immediate help regarding Grid ALV.
My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
Kinldy suggest how to go about it.
I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
Regards,
NamrataHere is a Sample code , it might help you
TABLES : sflight.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA: BEGIN OF it_sflight OCCURS 0,
checkbox(1),
carrid LIKE sflight-carrid,
END OF it_sflight.
*layout
DATA: wa_layout TYPE slis_layout_alv.
*field catalog
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
wa_fieldcatalog TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT carrid FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_sflight.
END-OF-SELECTION.
CLEAR it_fieldcatalog.
REFRESH it_fieldcatalog.
wa_fieldcatalog-fieldname = 'CHECKBOX'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'Chk'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'CARRID'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'Carrid'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
is_layout = wa_layout
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = it_fieldcatalog
TABLES
t_outtab = it_sflight
EXCEPTIONS
program_error = 1
OTHERS = 2.
*& Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
p_selfld TYPE slis_selfield.
CASE p_ucomm.
WHEN '&DATA_SAVE'.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref1.
CALL METHOD ref1->check_changed_data.
LOOP AT it_sflight WHERE checkbox = 'X'.
DELETE it_sflight INDEX sy-tabix.
ENDLOOP.
p_selfld-refresh = 'X'.
ENDCASE.
ENDFORM. "user_command -
How to merge rows with similar values in alv grid display in webdynpro
Hi experts,
i want to know about how to merge rows with similar values in alv grid display of webdynpro.grouping rows is possible in table display in webdynpro but i am not able to do row grouping in the alv grid display in webdynpro.
kindly suggest.
thanks ,
Anita.Hi Anita,
did you find a solution for this? I have opened a Thread, if you know the answer maybe you could help me out:
Is there an ALV function similar to the TABLE Row grouping?
Thanx in advanced!!!
Kind Regards,
Gerardo J -
How to insert the checkbox as a separate column in alv grid display
Hi
How to insert the checkboxes as a separate column in alv grid display with using the reuse_alv_fieldcatlog_mege.
example
matnr maktx ersda checkbox
10 books 28/03/2009 checkbox
Thanks
chinnuHi,
Check the following code.
TYPE-POOLS: slis.
TYPES:
BEGIN OF ty_output,
chk TYPE c,
number TYPE i,
name(20) TYPE c,
END OF ty_output.
DATA: gt_output TYPE STANDARD TABLE OF ty_output,
gs_output TYPE ty_output.
DATA: wa_layout TYPE slis_layout_alv.
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
After you populate the data, build the field catlog like shown below.
wa_fieldcatalog TYPE slis_fieldcat_alv.
wa_fieldcatalog-fieldname = 'CHK'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'CHK'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
wa_fieldcatalog-fieldname = 'NUMBER'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'NUMBER'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'NAME'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '3'.
wa_fieldcatalog-seltext_m = 'NAME'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_layout-box_fieldname = 'CHK' .
wa_layout-box_tabname = 'GT_OUTPUT' .
Now call the FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'USER_COMMAND_GRID'
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fieldcatalog
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* I_HTML_HEIGHT_TOP =
* I_HTML_HEIGHT_END =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_output
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Hi ,
I have one requirement in webdynpro ALV. I have to display all po header detail in one view and when user click on any po respective item detail from item table should display .
i am facing problem in user interaction means how to handle click event in where i have to call and how its possible.Hi Abhishek,
Try to post these type of questions in WD ABAP forum.
Please check the below threads for a help on your issue.
http://help.sap.com/saphelp_erp2005/helpdata/EN/f1/177741adb7167de10000000a155106/content.htm
[ALV|https://wiki.sdn.sap.com/wiki/display/WDABAP/GettingtheRowSelectedIntheALV....andMuchMore..]
Search on supply function in SDN, you will find more links.
Thanks,
Sreekanth
Edited by: Sreekanth on Jul 24, 2009 8:30 AM -
Hide delete option is not working in ALV List Display- urgent
Hi All,
In my program i am displaying the output by using alv list display. after displaying the data i am displaying my own pf status here. in this i have few pushbuttons like
selest all, deselect all, hide . first two options are working fine. when i click hide button selected records are going to be hide.but this is not happening in my program. any body cam send me the code plz.
i am sending my code below. if possible please modify and resend the code asap.
my code:
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
*data : box,
input(1) type c,
data : checkbox type c,
flag type c,
end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
*DATA : it_filt type slis_t_filter_alv with header line.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
when 'HIDE_DEL'.
rs_selfield-exit = 'X'.
it_filt-fieldname = 'CHECKBOX'.
it_filt-tabname = '1'.
it_filt-valuf = 'X'.
it_filt-intlen = '1'.
it_filt-inttype = 'C'.
it_filt-datatype = 'CHAR'.
it_filt-valuf_int = 'X'.
it_filt-sign0 = 'E'.
it_filt-optio = 'EQ'.
if it_filt[] is initial.
append it_filt.
else.
modify it_filt index 1.
endif.
perform display using i_object.
PERForm ALV_LIST_DISPLAY.
WHEN 'SHOW_DEL'.
rs_selfield-exit = 'X'.
free it_filt.
PERForm ALV_LIST_DISPLAY.
when 'SAVE1'.
select * from zuser_secobjects where
appln = zuser_secobjects-appln
and appln_partner = zuser_secobjects-appln_partner
and partner_type = zuser_secobjects-partner_type
and start_date = zuser_secobjects-start_date
and end_date = zuser_secobjects-end_date.
endselect.
if sy-subrc eq 0.
message e000(ZV) with 'Duplicate Entry'.
endif.
endcase.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'CHECKBOX'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.tHi,
What do you mean by Hiding the records.
Deleting completely from the screen.
You can just delete the records from the internal table and pass to field catalog before displaying again.
or serach in the slis structrue for hiding the contents of the output.
reward if useful
regards,
Anji -
How to edit particular field in alv list display-urgent
HI ALL,
my requirement is i am displaying output using alv list display. now my rewuirement :
i am displaying out in edit mode only. when user clicks one particular field
for example record is like
runrate a01 maheed -> if user clicks on a01 this field should be editable. i have a following code
w_field-edit = w_edit.
w_field-input = 'X'. -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
thanks,
maheedhar.tCan you please send me the sample code plz.
i am sending my code below.
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
data : checkbox type c value 'X',
action type c,
end of it_secobjects.
data : begin of it_secobjects1 occurs 0.
include structure ZUSER_SECOBJECTS.
data : checkbox type c VALUE 'X',
end of it_secobjects1.
data : wa_ita like line of it_secobjects.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
maheed-start.
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
delete it_SECOBJECTS.
endloop.
*RS_SELFIELD-REFRESH = 'X'.
maheed-end.
maheed-start. apr 13
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
delete it_SECOBJECTS.
endloop.
RS_SELFIELD-REFRESH = 'X'.
when 'SAVE'.
DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
commit work.
refresh :IT_SECOBJECTS1.
maheed-end. apr 13
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
ENDCASE.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog." USING w_edit TYPE any.
data : w_edit type c.
clear w_edit.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-EDIT = 'X'. "maheed
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_PARTNER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m03.
w_field-edit = w_edit.
w_field-input = 'X'.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'INACTIVE'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 3.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
DATA : LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'ACTION'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.t -
HI,
PLZ help me .
By using this code I select data from TXT file and insert data in CS13 transaction then I want to show each material which present in TXT file as ALV BLOCK DISPLAY.
Suppose txt file contain four material so report will show 4 list block .means data of every material showing in different blocks in the report.
Code which I am using showing data for last item from txt file in one block and other items showing when I click back button .
i am using below codes..........
*& Report ZCS13 *
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
Declaration of parameters
*SELECTION-SCREEN BEGIN OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_matnr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_werks.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_werks LIKE t001w-werks OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_albom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_albom LIKE stko-stlal DEFAULT ' '.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_bomap.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_bomap(4) DEFAULT 'PP01'.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b2.
*DATA :anr_datuv LIKE aenr-datuv.
*SELECTION-SCREEN BEGIN OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s03 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01 .
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_vfrom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_vfrom LIKE stpo-datuv DEFAULT sy-datum.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD pm_aennr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS pm_aennr LIKE aenr-aennr.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (17) FOR FIELD p_reqty.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_reqty LIKE stpo-menge DEFAULT '1' .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_assd.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_assd AS CHECKBOX.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
perform fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
form display_grid .
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = 'ZCS13'
i_callback_top_of_page = 'TOP_OF_PAGE_GRID'
is_layout = gs_layout
it_fieldcat = fieldcat
IT_SORT = GT_SORT[]
i_save = 'A'
it_events = gt_events[]
TABLES
t_outtab = it_stb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZALVTOTAL'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001)
IT_EXCLUDING =
*CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = i_fieldcat
i_tabname = 'IT_TAB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_tab[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
*IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
*ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb[]
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
form fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " fldcatHi ,
plz check the below codeand suggest me why it not showing data.....
i make changes according to you ...
waiting for your reply
*& Report ZCS13 *
REPORT zcs13 .
TABLES:
mara,
stpo,
t001w,
stko.
TYPE-POOLS: slis.
DATA: BEGIN OF it_stb OCCURS 0.
INCLUDE STRUCTURE zstpox.
DATA:END OF it_stb.
DATA: BEGIN OF it_matmaster OCCURS 0,
matnr TYPE matnr,
werks TYPE werks,
stlal type stlal,
capid type capid,
emeng TYPE emeng,
END OF it_matmaster.
DATA : ievent TYPE slis_t_event.
DATA: it_stb2 LIKE stpox OCCURS 0 WITH HEADER LINE,
it_stb3 LIKE stpox OCCURS 0 WITH HEADER LINE,
temp_cat TYPE slis_fieldcat_alv,
sline TYPE slis_listheader,
gt_list_top_of_page TYPE slis_t_listheader,
gs_layout TYPE slis_layout_alv ,
gt_events TYPE slis_t_event,
gt_sort TYPE slis_t_sortinfo_alv,
w_msg(255) TYPE c,
int TYPE i VALUE 0.
Declaration of parameters
*SELECTION-SCREEN BEGIN OF BLOCK b2.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_matnr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (8) FOR FIELD p_werks.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_werks LIKE t001w-werks OBLIGATORY .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_albom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_albom LIKE stko-stlal DEFAULT ' '.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_bomap.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS: p_bomap(4) DEFAULT 'PP01'.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b2.
*DATA :anr_datuv LIKE aenr-datuv.
*SELECTION-SCREEN BEGIN OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s02 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) text-s03 .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN END OF BLOCK b3.
*SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-s01 .
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_vfrom.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_vfrom LIKE stpo-datuv DEFAULT sy-datum.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD pm_aennr.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS pm_aennr LIKE aenr-aennr.
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (17) FOR FIELD p_reqty.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_reqty LIKE stpo-menge DEFAULT '1' .
*SELECTION-SCREEN END OF LINE.
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT (15) FOR FIELD p_assd.
*SELECTION-SCREEN POSITION 25 .
*PARAMETERS p_assd AS CHECKBOX.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS:p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1 .
CONSTANTS c_x VALUE 'X'.
DATA: w_topmat LIKE cstmat,
fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat TYPE slis_fieldcat_alv.
DATA:v_file TYPE string.
*SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
START-OF-SELECTION.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_matmaster
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'ZCS13'
I_CALLBACK_PF_STATUS_SET = PFSTATUS
i_callback_user_command = 'USER_COMMAND'(001).
IT_EXCLUDING =.
DATA :int1(10) .
PERFORM fldcat.
LOOP AT it_matmaster.
PERFORM explode_assembly.
PERFORM f01_set_layo CHANGING gs_layout.
PERFORM eventtab_build USING ievent.
PERFORM fldcat.
PERFORM display_grid.
ENDLOOP.
PERFORM display_grid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = 'x_print_layout'
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form EXPLODE_ASSEMBLY
text
FORM explode_assembly.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = 'BEST'
cuols = c_x
datuv = sy-datum
emeng = it_matmaster-emeng
knfba = c_x
ksbvo = c_x
mehrs = c_x
mbwls = c_x
mdmps = c_x
mktls = c_x
stlal = it_matmaster-stlal
stlan = p_bomap
mtnrv = it_matmaster-matnr
werks = it_matmaster-werks
svwvo = 'X'
vrsvo = 'X'
IMPORTING
topmat = w_topmat
TABLES
stb = it_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO w_msg.
WRITE: / w_msg.
EXIT.
ENDIF.
ENDFORM. "explode_assembly
*& Form display_grid
text
--> p1 text
<-- p2 text
FORM display_grid .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = gs_layout
it_fieldcat = fieldcat
i_tabname = 'IT_STB[]'
it_events = gt_events
it_sort = gt_sort
I_TEXT = ' '
TABLES
t_outtab = it_stb
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_grid
*& Form fldcat
text
--> p1 text
<-- p2 text
FORM fldcat .
*DATA: wa_fieldcat TYPE slis_fieldcat_alv,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZCS13'
I_INTERNAL_TABNAME = 'IT_STB'
i_structure_name = 'ZSTPOX'
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = 'ZCS13'
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " fldcat -
How to code to get intermediate results in webdynpro ALV? Please help!
Hi Experts,
I got following info from help file to generate Intermediate Results(subtotal).
Can somebody help me with sample code to achieve this?
Basically I want to subtotal 'Qty' column based on 'Product' field.
By default, all values in a field are used in the calculation during aggregation. However, you
are also able to generate intermediate results. You group the data records that contain the
values for an intermediate result and display each intermediate result in its own result row.
To generate intermediate results, you have to provide certain information:
● To specify in which field the values from which the intermediate results are calculated
are located, generate an aggregation condition for the desired field. The overall result is
displayed in the result row.
● To specify which data records are contained in an intermediate result, group the data
records: You sort the ALV output by the field that includes the criterion for the
intermediate result.
● To then generate the intermediate results, calculate the intermediate results using the
field with the criterion.
● To then display the intermediate results, switch on the display of intermediate results.
You are able to make the following settings for intermediate results:
● Generate intermediate results
● Display intermediate results
● Setting levels for drilling down intermediate results
● Set the position of the result rows (see Settings for Aggregation [page 196])
● Forbid the generation of intermediate results
Prerequisites
● You have generated an aggregation object for at least one aggregatable field.
● The field with the criterion for intermediate results is not an aggregatable field, and
therefore has an alphanumeric data type.
Generate Intermediate Results
To generate intermediate results in a field that already has an aggregation condition, generate
a sort condition for the field of a column (another column) (see Sorting [page 190]).
In this sort condition, define whether intermediate results are to be generated. To do this, use
the methods of the class CL_SALV_WD_SORT_RULE.
Methods for Generating Intermediate Results
Function Method
Generate intermediate results SET_GROUP_AGGREGATION
Check whether intermediate results are displayed GET_GROUP_AGGREGATION
Display Intermediate Results
Once you have made all settings, to generate intermediate results you have to switch on the
display of these intermediate results. You use the methods of the interface class
IF_SALV_WD_FIELD_SETTINGS for this (implementing class
CL_SALV_WD_CONFIG_TABLE).
Methods for Displaying Intermediate Results
Function Method
Display intermediate results SET_GROUP_AGGR_DISPLAYED
Check whether intermediate results are displayed GET_GROUP_AGGR_DISPLAYED
I have tried a bit but it is not working. here is my code:
get field and create aggregation rule of type total
lr_field = l_value->if_salv_wd_field_settings~get_field( 'Qty' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
l_field = l_value->if_salv_wd_field_settings~get_field( 'PRODUCT' ).
l_sortrule = l_field->IF_SALV_WD_SORT~create_sort_rule( ).
l_sortrule~SET_GROUP_AGGREGATION( 'Y').
l_value->if_salv_wd_field_settings~SET_GROUP_AGGR_DISPLAYED( 'Y' ).
Please help
Message was edited by:
gopalkrishna baligaHi Gopalakrishna balgia,
I think i have answered in the below thread. Check it out.
How to show Subtotal in webdynpro ALV(ABAP)? Kindly help!
Regards
Rakesh -
Help on ALV GRID display outputting format for 2 internal tables
Hi,
I have requirement in ALV GRID where I need to display the data from 2 internal tables. The first internal table has the content of Delivery due list data and second the internal table has the corresponding stock transfer data of the Delivery Due list. I have a checbox on my selection screen, when unchecked it should output the 1st internal table data, i.e for Delivery due list. When it is checked then it should output 1st Internal table data + 2nd internal table data of stock transfer. For example, 1 document delivery due list data and 2nd line for that document should show the stock transfer data. You can also check the transaction code VL10E for that will show a delivery due list...and for stock tranfer,you need to check with Purchase order in in the USer Role tabstrip. Pls suggest.
Regards,
MiraHi,
U can try out this code
REPORT zzz_test NO STANDARD PAGE HEADING
MESSAGE-ID zz.
The Data Declarations
INCLUDE zzm_test_alv_data.
The Selection Screen Definition
INCLUDE zzm_test_alv_selscrn.
The definition and implementation of the event reciever class
INCLUDE zzm_test_alv_class.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM f1000_load_itabs.
END-OF-SELECTION
END-OF-SELECTION.
IF NOT cb_disp IS INITIAL.
CALL SCREEN 9001.
ENDIF.
Include for getting data
INCLUDE zzm_test_alv_forms.
Include for PAI and PBO of screen
INCLUDE zzm_test_alv_screen.
INCLUDE ZZM_TEST_ALV_DATA *
This include has all the data declaration defined
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
Table Declarations:
TABLES: mara,
makt.
Internal Tables:
The following structure type must be defined in the data dictionary
DATA: i_fieldcat TYPE lvc_t_fcat,
i_fieldcat1 TYPE lvc_t_fcat,
i_output1 TYPE STANDARD TABLE OF mara,
i_output2 TYPE STANDARD TABLE OF makt,
Work Areas:
w_output1 TYPE STANDARD TABLE OF mara,
w_output2 TYPE STANDARD TABLE OF makt.
Variable:
DATA: lv_repid LIKE sy-repid.
lv_repid = sy-repid.
INCLUDE ZZM_TEST_ALV_SELSCRN *
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
SELECTION-SCREEN BEGIN OF BLOCK b_main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS: cb_disp AS CHECKBOX.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_main.
INCLUDE ZZM_TEST_ALV_CLASS *
This include has all the data declaration defined for ALV
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
INCLUDE <icon>.
Predefine a local class for event handling to allow the
declaration of a reference variable before the class is defined.
DATA : o_alvgrid1 TYPE REF TO cl_gui_alv_grid ,
o_alvgrid2 TYPE REF TO cl_gui_alv_grid ,
cont_for_cognos1 TYPE scrfname VALUE 'BCALC_GRID_01_9100',
cont_for_cognos2 TYPE scrfname VALUE 'BCALC_GRID_01_9200',
custom_container1 TYPE REF TO cl_gui_custom_container,
custom_container2 TYPE REF TO cl_gui_custom_container,
Work Area
w_layout TYPE lvc_s_layo ,
w_variant TYPE disvariant.
Constants
CONSTANTS : c_lay(1) TYPE c VALUE 'A' . " All Layouts
CONSTANTS: BEGIN OF c_main_tab,
tab1 LIKE sy-ucomm VALUE 'MAIN_TAB_FC1', "
tab2 LIKE sy-ucomm VALUE 'MAIN_TAB_FC2', "
END OF c_main_tab.
INCLUDE ZZM_TEST_ALV_FORMS *
This Include has the various forms used in the program
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
*& Form f9001_build_field_cat
To Build Field Catalog
-->P_I_FIELDCAT text
-->P_0021 text
FORM f9001_build_field_cat TABLES p_fieldcat STRUCTURE lvc_s_fcat
USING value(p_structure).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_structure
CHANGING
ct_fieldcat = p_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE i005 WITH 'Error in ALV field catalogue creation'.
" text-e05.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. " f9001_build_field_cat
*& Form f9000_objects_create
For creating Custom Containers
--> p1 text
<-- p2 text
FORM f9000_objects_create.
CREATE OBJECT custom_container1
EXPORTING
container_name = cont_for_cognos1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
CREATE OBJECT custom_container2
EXPORTING
container_name = cont_for_cognos2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = lv_repid
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT o_alvgrid1
EXPORTING i_parent = custom_container1.
CREATE OBJECT o_alvgrid2
EXPORTING i_parent = custom_container2.
ENDFORM. " f9000_objects_create
*& Form f9003_layout
To define the layout
-->P_SY_TITLE text
-->P_0030 text
-->P_0031 text
-->P_0032 text
FORM f9003_layout USING value(ptitle)
value(pzebra)
value(pmode)
value(pwidth).
w_layout-grid_title = ptitle.
w_layout-zebra = pzebra.
w_layout-sel_mode = pmode.
w_layout-cwidth_opt = pwidth.
w_variant-report = sy-repid.
ENDFORM. " f9003_layout
*& Form f9006_error_handle
To handle event
-->P_PTEXT text
FORM f9006_error_handle USING value(ptext).
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = text-e03 " Error Note
txt2 = sy-subrc
txt1 = ptext.
ENDIF.
ENDFORM. " f9006_error_handle
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD custom_container1->free.
CALL METHOD custom_container2->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = lv_repid
txt2 = sy-subrc
txt1 = 'Error in FLush'(500).
ENDIF.
ENDFORM.
*& Form f1000_load_itabs
Select from Database
--> p1 text
<-- p2 text
form f1000_load_itabs.
SELECT * FROM mara
INTO TABLE i_output1
UP TO 50 rows.
SELECT * FROM makt
INTO TABLE i_output2
UP TO 50 rows.
endform. " f1000_load_itabs
INCLUDE ZZM_TEST_ALV_SCREEN *
2/ Description / Include functions
This include contains PBO and PAI events for the screen of report
ZZZJJ_TEST_ALV
3/ Responsibility
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
DATA FOR TABSTRIP 'MAIN_TAB'
CONTROLS: main_tab TYPE TABSTRIP.
DATA: BEGIN OF i_main_tab,
subscreen LIKE sy-dynnr,
prog LIKE sy-repid VALUE
'ZZZ_TEST',
pressed_tab LIKE sy-ucomm VALUE c_main_tab-tab1,
END OF i_main_tab.
*& Module STATUS_9001 OUTPUT
text
MODULE status_9001 OUTPUT.
IF custom_container1 IS INITIAL.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
Creating Object
PERFORM f9000_objects_create.
Building the field catalog
PERFORM f9001_build_field_cat TABLES i_fieldcat
USING 'MARA'.
PERFORM f9001_build_field_cat TABLES i_fieldcat1
USING 'MAKT'.
Modifying the field catalog
PERFORM f9002_modify_field_cat TABLES i_fieldcat.
For Layout
PERFORM f9003_layout USING sy-title 'X' 'B' 'X'.
ENDIF.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module MAIN_TAB_ACTIVE_TAB_SET OUTPUT
Call method to display in the output grid
MODULE main_tab_active_tab_set OUTPUT.
main_tab-activetab = i_main_tab-pressed_tab.
CASE i_main_tab-pressed_tab.
WHEN c_main_tab-tab1.
To display report
i_main_tab-subscreen = '9100'.
CALL METHOD o_alvgrid1->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = c_lay
is_layout = w_layout
CHANGING
it_outtab = i_output1[]
it_fieldcatalog = i_fieldcat[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i000 WITH text-e06."Error in ALV report display
LEAVE LIST-PROCESSING.
ENDIF.
WHEN c_main_tab-tab2.
To display report
i_main_tab-subscreen = '9200'.
CALL METHOD o_alvgrid2->set_table_for_first_display
EXPORTING
is_variant = w_variant
i_save = c_lay
is_layout = w_layout
CHANGING
it_outtab = i_output2[]
it_fieldcatalog = i_fieldcat1[]
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE i005 WITH text-e06."Error in ALV report display
LEAVE LIST-PROCESSING.
ENDIF.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. MAIN_TAB_ACTIVE_TAB_SET OUTPUT
*& Module MAIN_TAB_ACTIVE_TAB_GET INPUT
Check & Process the selected Tab
MODULE main_tab_active_tab_get INPUT.
CASE sy-ucomm.
WHEN c_main_tab-tab1.
i_main_tab-pressed_tab = c_main_tab-tab1.
WHEN c_main_tab-tab2.
i_main_tab-pressed_tab = c_main_tab-tab2.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. MAIN_TAB_ACTIVE_TAB_GET INPUT
*& Module USER_COMMAND_9001 INPUT
User Command
MODULE user_command_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
PERFORM exit_program.
SET SCREEN '0'.
WHEN 'EXIT' OR 'CANC'.
PERFORM exit_program.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. USER_COMMAND_9000 INPUT
*& Module MAIN_TAB_ACTIVE_TAB_SET INPUT
Set sunscreen
MODULE main_tab_active_tab_set INPUT.
main_tab-activetab = i_main_tab-pressed_tab.
CASE i_main_tab-pressed_tab.
WHEN c_main_tab-tab1.
i_main_tab-subscreen = '9100'.
WHEN c_main_tab-tab2.
i_main_tab-subscreen = '9200'.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. MAIN_TAB_ACTIVE_TAB_SET INPUT
Thanks & Regards,
Judith. -
How to change the selected row color in an alv grid display ?
Hello ,
I WANT TO CHANGE THE COLOR OF THE SELECTED RECORDS IN AN ALV GRID DISPLAY ?
ITS URGENT..
WILL BE REWARDED...hai Ssnagh Samala
EXicut This report >
Hope It Will Meet U r Requirement.
If Found Helpfull Reward.
REPORT zcuitest_alv_07.
Use of colours in ALV grid (cell, line and column) *
Table
TABLES : mara.
Type
TYPES : BEGIN OF ty_mara,
matnr LIKE mara-matnr,
matkl LIKE mara-matkl,
counter(4) TYPE n,
free_text(15) TYPE c,
color_line(4) TYPE c, " Line color
color_cell TYPE lvc_t_scol, " Cell color
END OF ty_mara.
Structures
DATA : wa_mara TYPE ty_mara,
wa_fieldcat TYPE lvc_s_fcat,
is_layout TYPE lvc_s_layo,
wa_color TYPE lvc_s_scol.
Internal table
DATA : it_mara TYPE STANDARD TABLE OF ty_mara,
it_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
it_color TYPE TABLE OF lvc_s_scol.
Variables
DATA : okcode LIKE sy-ucomm,
w_alv_grid TYPE REF TO cl_gui_alv_grid,
w_docking_container TYPE REF TO cl_gui_docking_container.
PARAMETERS : p_column AS CHECKBOX,
p_line AS CHECKBOX,
p_cell AS CHECKBOX.
START-OF-SELECTION.
PERFORM get_data.
END-OF-SELECTION.
PERFORM fill_catalog.
PERFORM fill_layout.
CALL SCREEN 2000.
*& Module status_2000 OUTPUT
text
MODULE status_2000 OUTPUT.
SET PF-STATUS '2000'.
ENDMODULE. " status_2000 OUTPUT
*& Module user_command_2000 INPUT
text
MODULE user_command_2000 INPUT.
DATA : w_okcode LIKE sy-ucomm.
MOVE okcode TO w_okcode.
CLEAR okcode.
CASE w_okcode.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " user_command_2000 INPUT
*& Module alv_grid OUTPUT
text
MODULE alv_grid OUTPUT.
IF w_docking_container IS INITIAL.
PERFORM create_objects.
PERFORM display_alv_grid.
ENDIF.
ENDMODULE. " alv_grid OUTPUT
*& Form create_objects
text
--> p1 text
<-- p2 text
FORM create_objects.
Ratio must be included in http://5..95
CREATE OBJECT w_docking_container
EXPORTING
ratio = 95
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
CREATE OBJECT w_alv_grid
EXPORTING
i_parent = w_docking_container.
ENDFORM. " create_objects
*& Form display_alv_grid
text
--> p1 text
<-- p2 text
FORM display_alv_grid.
CALL METHOD w_alv_grid->set_table_for_first_display
EXPORTING
is_layout = is_layout
CHANGING
it_outtab = it_mara
it_fieldcatalog = it_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
ENDFORM. " display_alv_grid
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data.
SELECT * FROM mara UP TO 5 ROWS.
CLEAR : wa_mara-color_line, wa_mara-color_cell.
MOVE-CORRESPONDING mara TO wa_mara.
ADD 1 TO wa_mara-counter.
MOVE 'Blabla' TO wa_mara-free_text.
IF wa_mara-counter = '0002'
AND p_line = 'X'.
Color line
MOVE 'C410' TO wa_mara-color_line.
ELSEIF wa_mara-counter = '0004'
AND p_cell = 'X'.
Color cell
MOVE 'FREE_TEXT' TO wa_color-fname.
MOVE '5' TO wa_color-color-col.
MOVE '1' TO wa_color-color-int.
MOVE '1' TO wa_color-color-inv.
APPEND wa_color TO it_color.
wa_mara-color_cell] = it_color[.
ENDIF.
APPEND wa_mara TO it_mara.
ENDSELECT.
ENDFORM. " get_data
*& Form fill_catalog
text
--> p1 text
<-- p2 text
FORM fill_catalog.
Colour code : *
Colour is a 4-char field where : *
- 1st char = C (color property) *
- 2nd char = color code (from 0 to 7) *
0 = background color *
1 = blue *
2 = gray *
3 = yellow *
4 = blue/gray *
5 = green *
6 = red *
7 = orange *
- 3rd char = intensified (0=off, 1=on) *
- 4th char = inverse display (0=off, 1=on) *
Colour overwriting priority : *
1. Line *
2. Cell *
3. Column *
DATA : w_position TYPE i VALUE '1'.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'MATNR' TO wa_fieldcat-fieldname.
MOVE 'MARA' TO wa_fieldcat-ref_table.
MOVE 'MATNR' TO wa_fieldcat-ref_field.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'MATKL' TO wa_fieldcat-fieldname.
MOVE 'MARA' TO wa_fieldcat-ref_table.
MOVE 'MATKL' TO wa_fieldcat-ref_field.
Color column
IF p_column = 'X'.
MOVE 'C610' TO wa_fieldcat-emphasize.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'COUNTER' TO wa_fieldcat-fieldname.
MOVE 'N' TO wa_fieldcat-inttype.
MOVE '4' TO wa_fieldcat-intlen.
MOVE 'Counter' TO wa_fieldcat-coltext.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'FREE_TEXT' TO wa_fieldcat-fieldname.
MOVE 'C' TO wa_fieldcat-inttype.
MOVE '20' TO wa_fieldcat-intlen.
MOVE 'Text' TO wa_fieldcat-coltext.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " fill_catalog
*& Form fill_layout
text
--> p1 text
<-- p2 text
FORM fill_layout.
Field that identify color line in internal table
MOVE 'COLOR_LINE' TO is_layout-info_fname.
Field that identify cell color in inetrnal table
MOVE 'COLOR_CELL' TO is_layout-ctab_fname.
ENDFORM. " fill_layout
Regards.
Eshwar. -
Export and Import functionality in WebDynpro ALV
Hi Experts,
I have done a webdynpro alv application and it is displaying the data as i wanted. However i have a requirement to get the alv displayed data in an excel sheet( which works with the export button on alv) and update that excel sheet which will be updated back in the alv table.(for eg any import button functinality on alv)
Regards,
TashiHi,
For this you need to use file upload to upload the modified excel data back to ALV. Else why dont you make an ALV Editable.!
For upload excel refer this wiki: [Upload excel in WDA|http://wiki.sdn.sap.com/wiki/display/WDABAP/ExcelFileUploadAndDisplayDataUsingWebDynPro+ABAP]
hope this helps u.,
Thanks & regards,
Kiran. -
Dynamic report output in a webdynpro alv
Hi,
I have created a dynamic report in the R/3 system . In this report, i am creating a report program within the report and subsequently executing this dynamically created report and displaying in the ALV..
Is it possible to handle such a scenario in a webdynpro ALV. One option is to use ITS and display the report in the portal but is there some other way so that i can directly view this report in an alv grid in a view.
all help appreciated!!
regards,
PriyankHi Priyank,
This could be one of the solution:
1] Run the report in background mode (using submit statement, dn't forget to give printer as LOCL), get the spool id programatically. Use the FM's CONVERT_OTFSPOOLJOB_2_PDF or CONVERT_ABAPSPOOLJOB_2_PDF.
Which returns the ouput of table tline, convert this to xtring and bind it to xtring attribute.
In view add a interactive form and bind the xstring attribute to the Interactive form.
By following the above steps, we can display the result in the PDF in WD ABAP.
2] The report result is ALV and in most of the cases we generally do not have function modules or any other easy way to get the output.
In such cases the best approach which we follow is, to run this in background mode and generate the spool and display the ouput in PDF.
3] But if intertactive form is not present in your requirement then we need to debug the logic of the report (if no FM or class present) and get the results and display it in the View.
You can create a service which takes the parameters of the report, submits it and
transfers the result to HTML. In a view you use an IFRame which takes the URL of the service and shows the result HTML.
just additionally read this thread,
Display simple ABAPLIST
Here an IFrame is used to display HTML output of report. But as IFRame gets obsolete the Suresh's solution seems to be pretty cool.
Hope this will help you!
Cheers,
Darshna. -
HOW TO DISPLAY MY OWN PF STATUS IN ALV LIST DISPLAY
Hi All,
i am developing one program in this program i am displaying output by using alv list display. after displaying the out SAP predefined pf status is coming. here i need my own pf status. any body can send me the sample code ir modify my code if possible.
i am sending my code below.
report zmahi6.
type-pools : slis.
tables : zuser_secobjects.
data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
"type zuser_secobjects-start_date
p_edate(10) default '12/31/9999',
type zuser_secobjects-end_date,
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
start-of-selection.
perform get_data.
check sy-subrc eq 0.
set pf-status 'ZMAHEE'.
perform prepare_fieldcatalog.
perform alv_list_display.
*& Form PREPARE_FIELDCATALOG
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " PREPARE_FIELDCATALOG
*form pf_status_set using rt_extab type slis_t_extab.
set pf-status '0001'.
*endform.
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_comomand = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_sort = i_sort
it_events = it_evts[]
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " GET_DATA
thanks,
maheedhar.tFollow this steps.
I ahve done it once and hope wuld work for you as well.
Go to SE80. Open a a standard ABAP program - SAPLKKBL. diasplay object.
This program has many standard GUI status. Copy the one which suits you the best. May be any one standars status. Right click it and copy to your custom report. Now open your Z-Program in SE80. You will see the GUI status and when you open it you see the name of the status that you have copied from.
Now you can go and do any modifications in the screen.
Remember you have to use the same status in the program as well.
Please check this piece of code.
call the ABAP list viewer *
FORM list_display TABLES a_output.
pgm = disvariant-report = sy-repid.
disvariant-variant = variant.
call list viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
i_callback_pf_status_set = 'SET_PF_STATUS'
it_fieldcat = fieldcat
is_variant = disvariant
is_layout = layout
is_print = print
i_save = 'A'
it_events = eventcat
it_sort = sortcat
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = a_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "LIST_DISPLAY
FORM SET_PF_STATUS *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'STATUS1'.
ENDFORM. "set_pf_status
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA t_difference TYPE i.
CASE ucomm.
WHEN 'ENT1'.<----Function code
D0 your processing.
ENDCASE.
selfield-refresh = 'X'.
ENDFORM. "user_command
HOpe this helps.
Shreekant
Maybe you are looking for
-
IPod works with Windows but not iMac
I have an 80GB iPod Classic that works perfect on my computer running Windows Vista and iTunes 7. I have only ever used it with iTunes. My iPod's format is FAT32 (Windows). And it's running software Version 1.1.2 and disk use is enabled. When i try a
-
Can you change all classic controls to 3d ones at once.
I am upgrading from 5.1.1 to 6.1 and wondered if I can change all my front panel controls and indicators from classics to new 3d look.
-
HI, after I have opened a file or two, when I attempt to open a third I get a "cannot complete request due to a program error" And can't open anything else until I quit the program and open it again. I've tried re-installing the software, but to no
-
Items in login items still load although unchecked
I have a few items in System Preferences/Accounts/Login Items. Even though I have them unchecked they still load on rebooting. How do I stop that from happening? OSX 10.4.9
-
Dear Frndz, Plz give me some idea about QM inforecord and also help me out the TCODE for it. REgards, Srini