Webdynpro development for portal integration

our requirement is to run the adoe interactive form in enterprise portal and store the entered data in SAP system.
Can i develop in NWDS (call LIfecycle designe inside) and create webdynpro object by selecting new project as
1) webdynpro project or
2) development component project and type as webdynpro and select domain is Enterprise portal etc.,
which one is correct way for webdynpro development and deploy in . If I select the 2nd option, how to deploy it.
Please advise
Thanks
Gopal

Hi Gopal,
EP7:
Expand the local and sap.com webdynpro components.
You will see your WebDynpro DC in "sap.com" which is the default vendor while creating a DC.
After you found the DC select an application and follow the other steps to create an iView.
If it is WebDynpro Project then you can see that in local.
If you are using EP6 then follow the document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3e36d690-0201-0010-cd99-bfbb81bd33d9
Thanks & Regards,
Jhansi Miryala

Similar Messages

Developing for Portals

Hi, I'm diving into Web Dynpro for Java and wondering if this is the tool used for developing Portal Applications? I thought I remember hearing of a different toolset for developing portal applications? Can anyone add some clarity to the what Web Dynpro would be used for and what is used for developing "Portal Applications"?
Thanks,
Ken Murray

Hi,
The NetWeaver Developer Studio is an extension of Open-end (Java) eclipse Platform.
The eclipse functinality has been enhanced to used for SAP Development perspetive,
check these links,
[http://www.sap.com/platform/netweaver/components/developerstudio/index.epx]
[http://help.sap.com/saphelp_webas630/helpdata/en/5c/ad505250c25945b62c3043508dfa38/content.htm]
[http://www.sapdevelopment.co.uk/java/java_studioeclipse.htm]
[SAP NetWeaver Developer Studio 7.1 Overview]
[http://www.eclipsecon.org/2004/EclipseCon_2004_TechnicalTrackPresentations/48_Kessler.pdf]
Hope this helps,
Thanks,
Vamshi

Prerequisites for Portal Development

Dear Community,
I am new in SAP, and it will be really nice to be a part of the Community Network.
I want to know what I am required to know before starting developing Portal in SAP.
And what are the tools and techs required?
Thanks in advance..

Dear Dayasankar,
there is also another alternative.
If you already have knowledge with ABAP, this might be an interesting and easier alternative.
I'm talking about
Webdynpro for ABAP (WD4A) or Businsess Servers Pages (BSP).
...and there is also ITS (Internet Transaction Server). But I would not consider it at all, because it is old and not supported anymore by SAP (I think).
These 2 alternatives might not be considered "pure" Portal developments because they run on the backend.
But if your idea is to develop something to run on the Portal as well, then the 2 alternatives above will work perfectly.
So at the end, depends on what type of development you want to have on your Portal.
Do you need to extract data from the backend and develop some quick applications using transaction SE80 ?
Then please go for WD4A or BSPs.
If on the other hand you want to use the Portal APIs, develop for Portal KM (this is a tool exclusive on the Portal) or you want to integrate with other JAVA components ?
Then go for WD4J (Webdynpro for JAVA) or PAR develoment (Portal Archive componentes) - for all of these you will use JAVA and will need to develop your stuff with NWDS (Netweaver Developer Studio) as already mentioned.
Hope this helps you choose your way.
Kind Regards
/Ricardo Quintas

Question of the day: Best Portal integration strategy for CRM 7.0?

I would appreciate it if anyone can give me their feedback with the knowledge and background with the Portaland CRM WebUI integration based on the following options:
These are the available options for portal integration:
Option A: Initial Login to CRM WebUI, launch other functionalities from WebUI
     All users login through SAP CRM WebUI. Based on user portal roles, available applications are presented using WebUI transaction launcher to open up as new browser windows or within the content area of CRM WebUI
Option B: Initial Login to Portal, CRM and other applications launched from Portal
     CRM WebUI is setup as a full screen BSP iView. All users login once through SAP NW Portal. Based on user portal roles, available applications are presented. CRM, BI BOBJ, KM are launched in a separate browser windows. For SAP applications, there is SSO available.
Option C: Initial Login to Portal, CRM and other applications integrated into Portal
     All users login once through SAP NW Portal. CRM WebUI is integrated into the Portal content area, and navigation between CRM screens are handled through Portal links.
Business considerations:
1. Single-Sign-On (SSO): The proposed solution should provide an integrated sign on page that allows access to other CRM applications without the user logging in again.
2. Frontend navigation: All CRM applications used by business should be accessible from a single location. This should cater for future applications as well eg: AFLS. Ideally there should be a minimum number of windows that a user has to juggle.
3. Contextual usability: The related applications should be linked to CRM and launched where it is used to support business operations. If possible, the applications should launch with the particular CRM transaction/record to minimize time required to locate relevant information eg: integrated reporting
4. Standardized look and feel: The portal should not change the functionalities of standard CRM and should integrate well in terms of the look and feel of the product and NOL branding
Based on the following business considerations, would Option B a better solution in terms of integration with other CRM applications, integration with other SAP applications (BOBJ, KM), flexibility in integrating with other options, SSO, maintainability and scalabilit.
Thanks a lot,
Cecilia
Edited by: John Burton on Jan 20, 2010 1:38 PM

We did option B at our client for CRM 2007. The authetication works perfectly between SAP NW Portal, and SAP CRM. It was one day work with single BSP iView (I beleive).

BusinessObjects Portal Integration - iView Template Missing

Hello
I have installed my BusinessObjects for Portal as follows:
1. We already have BI 7.0 on SQL 2005 on BIDEMOSER SERVER.
2. Installed BusinessObjects Enterprise 3.1 , Crystal Reports 2008, SAP GUI 7.1 and SAP Integration Kit on this new server name : BODEMOSER.
3. We already have EP 7.0 on Oracle 10.2 on EPDEMOSER SERVER.
I have installed the BOE 3.1 and Integrated with the BI Server and imported the roles and all the functions are working fine between BO and BI.For Portal Integration i have transferred the masterview file from BODEMO SERVER com.businessobjects.pct.masteriview.par to the EPDEMOSER SERVER.
And it was uploaded in the EPDEMOSER SERVER System Administration--> Support --> uploaded successfully.And I have followed the SSO configuration as per te guide. And values in the Web.xml files are properly as per the guide.
After the uploading the masterview par file i could not able to view the iView template in the System.I have cleaned the cookes and all temp files.
As per the guide I have created an folde name BI_BO and SYstem name as BI_BO_DEMO.Now when I started creating a iView Template by right clicking the System name BI_BO_DEMO and provided the following parameters for each Property Category.
CRYSTAL Enterprise server:
Host Name of Crystal Enterprise Server      :     BODEMOSER.srv.com:8080
Path of Crystal Enterprise Server      :     /SAP
Protocol of Crystal Enterprise Server      :     http
User Management
Authentication Ticket Type     :     SAP Logon Ticket
Logon Method                :     SAPLOGON TICKET
User Mapping Fields
User Mapping Type
Connector
Application Host      :     BIDEMODER.srv.com
Gateway Host      :     BIDEMODER.srv.com
Gateway Service      :     sapgw00
Logical System Name      :     BIDCLNT001
Remote Host Type      :     3
SAP Client           :     001
SAP System ID      :     BID
SAP System Number      :     00
Server Port
SNC Library Path
SNC Mode - Select -01
SNC Name
SNC Partner Name
SNC QOP (Security Level) :     0
System Type      :     SAP_BW
Trace Mode           :     0
System Alias
Created a System Alias as : SAP_BW
And tested the connection where it gives as
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Whether i should install the BO Integration kit in EP portal also or any Portal Inetgration kit is available.
Regards
Bala

Hi,
1. Whether Integration kit for SAP should be installed in EP Server also ( which has been installed in BO server for BI and the SSO for BI and EP STRUSTSSO2 also works fine.
- the portal is acting as the frontend for viewing content and yes there needs to be trust between your portal and your BW system
2. the connector parameter and the iview template object parameter as correct as per the distributed enviorment.
When i checked with portal; admin they asked doubt what should be crystal enterprise server ( BO) and the what is the server should connector parameter should have.
- the Crystal Enterprise parameter do not influence the connector properties and do not lead to the point that the connector settings fail. the Crystal Enterprise parameters are only relevant when viewing SAP BusinessObjects related content.
Make sure you connector settings work even without the Crystal Enterprise parameters first.
ingo

Portal integration of Webdynpro for ABAP application

Hi all,
Can anyone provide me with the steps for <b>integrating a Webdynpro for ABAP application with portal?</b>
Regards,
Bino

Hi Bino
Check out the following link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/portal integration of web dynpro applications.pdf
Regards
Rajeev.
Do award points for helpful answers in SDN.

Webdynpro for ABAP and Portal Integration

Hi Experts,
we created a WebDynpro for ABAP application for portal. The application will modify/update few fields in backend sap HR table PA0006 (infotype 6) . The end user (portal user) should be able to update his data in backend with the iview created on this application.
I have below two questions in my mind.
1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
Thanks
Ajay

1. Do we need portal eventing for this? It's a single iview in portal which will fetch and update his data through this WebDynpro for ABAP application.
Answer: If you use, for exemple ITS to access this Webdympro, you will not need any action on portal for sure. Actually you will just need actions on portal, if you want to make some customization on portal side. If you want just show the Webdympro how it is, your action are all on backend..
2. It is for 10 countries of almost 1000 users (with same userid in portal and backend). How can I make sure that the enduser updates and fetch his records only. The SSO is already set up between Portal and Sap ECC system. Do I need to again pass the enduser portal id to the sap in coding to fetch and update the data or sso will take care of itself.
If you access via ITS, te custome will acess the backend with the user you have set on the SSO or user-mapping. The portal there is nothing to do in this regards, you must just take care of this on backend.
Please evaluating the answer you are contributing for the SDN keep growing.
Edited by: Fabio Sarmento on Sep 19, 2011 2:41 PM

How to create an iview for ABAP Webdynpro Application in Portal?

HI,
I am Webdynpro Java webdynpro developer.
I want to create an IVIEW for an ABAP Webdynpro application in the enterprise portal.

The process is almost exactly the same as creating a Web Dynpro Java iView. You simply chose the ABAP instead of the Java radio button when you reach that step in the Web Dynpro iView creation process. There is a video on the topic here:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/eae111e7-0b01-0010-6cb7-e0dd2bfbfa7a
You can also read about the process in the online help:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1d/e4a34273f60b31e10000000a1550b0/frameset.htm

Standard Transaction Vs Webdynpro ABAP development in Portal ?

Hi All ,
I just need to know that if we do some kind of enhancement/modification in sap standard screen using the classical tools like screen painter etc. when we deploy these transaction on portal we will have those changes on the web based GUI or we need to developed the whole new development for that transaction to show on the portal ?. I know webdynpro for ABAP can be used for new developments but what if we just need a simple change on screen and we can achieve the goal using simple screen enhancement ? do we need to develop the screen again in webdynpro ? Kindly can anybody explain this ?
Thanks a lot in advance.
Laeeq.

SAP ABAP screens are used by SAPGUI for Windows and SAPGUI for HTML and are presented exactly as the screen designer lays them out. The portal can start either SAPGUI variant.
WebDynpro has nothing to do with existing SAP ABAP screens. You build new screens and then call BAPIs etc to populate the fields.
The portal can start a Web Dynpro application.
To change the look of an existing SAP ABAP screen you need to change the screen. If you want to completely change the screen, start building Web Dynpro programs.
Cheers

Wrong path for go.bat in portal integration

Hi Friends,
during the configuration of the portal integration in rspor_cust01 I get the message
'Windows can not find C:\usr.......\go.bat'.
Where can I change the path because it is in D:\usr\sap\......go.bat.
Thanks you for any help.
Rg Jimbob

Hi Subbu,
I used workshop page properties to associate the image to the page.
framework/skins/classic/images/home.gif
- Shankar
Subbu Allamaraju <[email protected]> wrote:
Shankar,
Did you use any tag to create the img tag? Do you have any sample
HTML/JSP snippet?
Subbu
Shankar Bala wrote:
I created a new desktop and have the following problem. The imagelinks to portal
pages in the horizontal nav bar in the top have wrong path.
Example.
In the original portal the home page link in the nav bar has a imageassociated
with it in workshop.
\framework\skin\classic\images\home.gif
The partial url generated for the image looks liek this:
\mywebapp\\framework\skin\classic\images\home.gif.
I created a new desktop everything works fine except for the images.The href's
are created for the links but the image path is wrong.
the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
The "appmanager" in the path causes the problem.
Is this a bug?

BO Portal Integration for SSO

Hi
We are currently doing the BO Portal Integration
We are using BO 3.1 and Portal 7.01 and the Integration Kit is 3.1
We want to integrate Portal with BO
I am following the following link for integration
http://wiki.sdn.sap.com/wiki/display/BOBJ/CreateBOEXI3.1IntegrationKitiViewTemplateintoSAPEP+Portal
In that step 19 they have mentioned the details of Connector during System creation
We are not using SAP BI, the BO gets its data from rapidmart and BO users are created on Windows Active Directory.
So when the users are being created on windows AD how do we populate the values in the Connector of the System Creation
beacuase the step 19 says
From the Property Category list select Connector. Your selections determine the SAP ABAP system that will be validating the users. This is the system that you have defined previously as an entitlement system in CMC. Configure the values for Application Host, Gateway Host, Gateway Service, SAP client, SAP System ID (SID) and SAP System Number according to the SAP system.
Can someone please let me know regarding this and how we do the SSO between Portal and BO
As our user validation is not SAP ABAP system but Windows AD
Regards
Janak Mehta

Hello Johannes,
Could you please help to display BO reports in Portal.
please look into thread crated for the same.
Link: [/thread/1532284 [original link is broken];
Best Regards,
Pankaj Sharma

Workshop support for portal development

I have installed Weblogic platform 10.3, weblogic server and weblogic workshop gets installed. But when I open the workshop and search for portal perspective; it not there.
I have also installed Weblogic Portal 10.3.2, by which portal server, weblogic server and eclipse gets installed.
I need to create portal application and portal web project into workshop. but i am not able to find portal perspective or application.
Any help regarding will be highly appriciated.
Thanks a lot in advance.
-- Prashant

Our sales rep told us yesterday that Workshop for WLS9 will be available around the end of the year.
Until then there is no upgrade path for current workshop apps either. That means that apps developed in Workshop 8.1 won't run in WLS9 apparently.

Java Portal Integration Kits for CrystalReports 10

Hi,
I have to integrate Websphere Portal 6.1 with Crystal Reportss 10.
Is Java Portal Integration Kits avaible for Crystal Reports 10 ?
Andrzej Urbanowicz

Java Portal Integration Kits integrate Enterprise, not Crystal Reports.
And PIK issues should not be posted here, but in one of the "Business Objects" forums.
SIncerely,
Ted Ueda

Xcelsius Portal Integration kit for Sharepoint not showing in the gallary

Hi Experts,
I am testing the Xcelsius in my organization. After creating a dashboard , I am trying to integrate it in my Sharepoint portal.
For that I installed SP webpart container in the server. During installation it was not showing any wizard to me for selecting the options. After installation , i am trying to configure it in the webpart galary but ! couln't find the Xcelsius Webpart container in that list.
What to do to show it ? Could anyone guide me ?
Regards,
Jyothi

i'm not sure how it works with Sharepoint... however, i can tell you how we use the portal integration kit within WebSphere Portal.
first, the PIK itself is only used for BO integration, not Xcelsius integration (unless you are doing SSO in which case the BO login module is required).
the Xcelsius integration comes from creating the web parts on the client. For example, for WebSphere there is a tool that is loaded onto the client machine called "XcelsiusPortletCreationUtility". the purpose of this utility is to take a swf file and wrap it in a war file that can be deployed to the portal. i would assume that Sharepoint works in a similar way with a client utility.
also, within the Xcelsius file you must create a portal data connection, even if it's not actually used.
please look through your Xcelsius documentation or try to find the specific document that explains Sharepoint integration.

Sytax highlighiting for Jsp Dyn Pages for portal development.

Hey,
I am doing JSP with the htmlb taglib for portals. When I edit a jsp page in the Developer Studio, I expect syntax highlighting. This is what I see in the documentation for jsp editing as well - you know where the keywords are highlighted.
Sytax highlighiting for jsp in Developer Studio for portal development.
http://help.sap.com/saphelp_nw04s/helpdata/en/ce/e0a341354ca309e10000000a155106/content.htm
OutputSuccess.jsp, OutputSuccessText.jsp are the two jsp's that are syntax highlighted on this page.
In my Developer Studio this is not the case. Is a JSP editor and its highlighting not part of the Developer Studio. If it is, how do I get it to work.
I also know that given the right taglib's, the editor also gives autocomplete for taglibs with its settings. I am hoping to speed up my development with this.
Right now I am using a text editor for this. There are a couple of jsp plugin's such as Exadel or Lomboz which I can integrate if a jsp syntax editor is not there in the Developer Studio. I just wanted to know the right way to go about this.
Thank you for your help.
Sumit.

Never mind. I was in the preview mode.

Webdynpro development for portal integration

Similar Messages

Maybe you are looking for